Novel bent-shaped liquid crystalline compounds II. Synthesis and properties of the 1,3-bis4-[4-(4-alkyloxybenzoyloxy)benzylidene]aminophenoxypropan-2-ols

A series of new symmetric dimer compounds was synthesized, constaining 2-hydroxy-1,3-dioxypropylene as the central linkage and terminal alkyl chains with different lengths. The chemical structures of the liquid crystal dimers (2ES-n) were examined by FTIR and ¹H NMR spectroscopy. Their mesomorphism, thermodynamic properties and optical textures were investigated by differential scanning calorimetry, polarizing optical microscope and X-ray diffraction. For homologues with terminal propyloxy and butyloxy chains, no liquid crystalline phase was observed. Homologues with pentyloxy and hexyloxy terminal chains showed nematic phases, while those with heptyloxy, octyloxy, nonyloxy and decyloxy terminal chains displayed nematic phases and smectic phases. The results confirmed that the liquid crystalline phase changes from nematic to smectic as the terminal chain length increases.     

Characterization of mesophases of a spontaneously gel-forming compound

The phases formed by 10, 20, 30, 40 and 50 mg ml^-1 solutions of a compound, named RWJ-47428, in water have been studied with optical polarizing microscopy and X-ray diffraction. All solutions were found to exhibit the nematic liquid crystalline phase over a wide temperature range. Changes in optical textures showed a transition to the isotropic phase above 130°C in the most concentrated solution. The dimensions (length and width) of the orienting unit were determined to be 22 Å and 4.9 Å. Higher concentration samples exhibit both the nematic and the lamellar phases.     

Symmetric 3,5-pyrazole and isoxazole heterocycles comprising a bent core unit: synthesis and mesomorphic characterisation

The synthesis and characterisation of some new liquid crystalline (LC) heteroaromatic compounds containing the five-membered pyrazole/isoxazole rings is reported. Some of the compounds exhibited enantiotropic LC properties. The transition temperatures and LC textures of the mesophases were determined using polarised optical microscopy (POM), differential scanning calorimetry (DSC) and X-ray studies. The five-membered heterocyclic compounds with the pyrazole core exhibit smectic C (SmC) phase, whereas isoxazoles show SmC and nematic (N) phases.     

Synthesis, thermal stabilities, and anisotropic properties of some new isoflavone-based esters 7-decanoyloxy-3-(4'-substitutedphenyl)-4H-1-benzopyran-4-ones

A series of new isoflavonic esters 7-decanoyloxy-3-(4'-substitutedphenyl)-4H-1-benzopyran-4-ones containing a heterocycle in their central core with one flexible alkyl chain and various substituents, R (where R = F, Cl, Br, CH₃, OCH₃, or H) at 4'-position at one end, have successfully been synthesised, isolated, and characterised. The physical properties of title compounds were studied using spectroscopic techniques (Fourier transform infrared, ¹H and ¹³C nuclear magnetic resonance). The liquid crystalline properties and the textures of these compounds along with their thermal stabilities were investigated via polarising optical microscopy and differential scanning calorimetry. All the compounds except the member without the substituent were enantiotropic mesogens exhibiting smectic A and/or nematic phases. The layer periodicities in relation to different phases were substantiated by X-ray diffraction wherein the molecules within the SmA phase were found to be intercalated. The structural changes that resulted in a variation of transition temperature as well as the electronic polarisability of the respective compounds are also discussed.     

Synthesis and comparative structural investigation of crystalline and liquid-crystalline phases of low molecular mass compounds and side group polymers I. Low molecular mass compounds

Low molecular mass compounds and analogous side group polymers with a thermotropic phase behaviour crystalline-smectic liquid-crystalline-isotropic have been synthesized for a comparative structural study. As characteristic features of the compounds a biphenyl group has been chosen for the mesogenic core and alkoxy parts of various lengths as terminal and spacer groups. The phase behaviour has been studied with differential calorimetric (DSC) measurements and polarization microscopic observations. The low molecular mass compounds form crystalline phases at room temperature and exhibit predominantly mosaic textures in the polarization microscope at elevated temperatures indicating high order of the packing of the molecules. The arrangements of the molecules in the crystalline and liquid-crystalline phase can best be described as layered structures according to X-ray diffraction measurements. A structural analysis of a solution grown single crystal provides valuable information on the conformation and packing of the compounds investigated in this study.     

Phase oscillations in lead monoxide under the X-ray beam

Time-resolved X-ray diffraction is used to examine phase oscillations in the lead monoxide system. The X-ray beam maintains the system far from equilibrium by producing highly disordered metastable lead monoxide. Experimentally determined logistics maps indicate that a minimum of three phases are required for the oscillations. One phase is a disordered phase, the other are commensurate and incommensurate phases in different diffraction domains. The oscillations are postulated to occur between the crystalline phases and the disordered phase. The kinetics are modeled as quasiperiodic for three or more phases, one disordered and two or more crystalline. The model predicts temperature, X-ray beam intensity, and defect dependence, but does not account for nonlinear effects.     

Shape-persistent macrocycles with intraannular polar groups: synthesis, liquid crystallinity, and 2D organization

The synthesis of macrocycles with intraannular polar ester groups and extraannular oligo-alkyl groups is described. The compounds exhibit stable liquid crystalline phases showing fan-shaped textures under the polarizing microscope, typical for a columnar order of the molecules. X-ray powder diffraction data of the LC phase indicate that the unit cell contains two symmetry-related units, a feature pointing most probably to a restricted rotation of the macrocycles within a stack. The X-ray data were further supported by solid-state NMR experiments, showing that the rigid core of the compounds does not rotate with kHz or higher frequencies within the column in the LC phase. Apart from the organization of the molecules in the LC phase, the 2D organization of the macrocycles at the solvent-highly oriented pyrolytic graphite (HOPG) interface was investigated and showed that these compounds are capable of nanofunctionalizing the HOPG surface in the multinanometer regime.     

A new high temperature mesophase of a double-swallow-tailed compound with weak optical anisotropy

A new six-ring double-swallow-tailed compound is presented which shows four liquid crystalline phases. In addition to a smectic C phase and two columnar phases (oblique and hexagonal), a high temperature mesophase was observed which exhibits a very weak birefringence and which shows unusual optical textures.     

Induced alignment of a solution-cast discotic hexabenzocoronene derivative for electronic devices investigated by surface X-ray diffraction

A surface X-ray diffraction study is presented showing that highly ordered and uniaxially aligned hexa(3,7-dimethyl-octanyl)hexa-peri-hexabenzocoronene (HBC-C8,2) films can be fabricated by crystallization from solution onto friction-transferred poly(tetrafluoroethylene) (PTFE) layers. Three crystalline HBC-C8,2 majority phases result. In all three phases, the HBC-C8,2 molecules self-organize into columns which are uniaxially aligned along the direction defined by the PTFE macromolecules of the substrate. The three phases are quite similar, the major difference being their orientation with respect to the substrate. A quasi-2D epitaxial growth mechanism with a grapho-epitaxial component for one of the three phases explains the formation of the three rotational HBC-C8,2 variants. A method to obtain a thin film with only one phase is proposed. The results show that standard THETAV;-2THETAV; X-ray diffraction and transmission electron diffraction can be very misleading tools to estimate the crystalline quality in a thin film of complex structure.     

Polymorphism and mesomorphism of oligomeric surfactants: effect of the degree of oligomerization

A series of cationic oligomeric surfactants (quaternary dodecyldimethylammonium ions with two, three, or four chains connected by an ethylene spacer at the headgroup level, abbreviated as dimer, trimer, and tetramer) were synthesized and characterized. The influence of the degree of oligomerization on their polymorphic and mesomorphic properties was investigated by means of X-ray diffraction, polarizing optical microscopy, thermogravimetry, and differential scanning calorimetry. All compounds display layered arrangements with interdigitated dodecyl chains. The increase in the degree of oligomerization increases the interlayer distance and decreases the ordering in the solid phase; whereas the dimer sample is fully crystalline with well-developed 3D ordering and the trimer and tetramer crystallize as highly ordered crystal smectic phases. The number of thermal phase transitions and sequence of phases are markedly affected by the number of dodecyl chains. Anhydrous samples exhibit polymorphism and thermotropic mesomorphism of the smectic type, with the exception of the tetramer that displays only transitions at higher temperature associated with decomposition and melting. All hydrated compounds form lyotropic mesophases showing reversible phase transitions upon heating and cooling. The sequence of liquid-crystalline phases for the dimer, typical of concentrated ionic surfactant systems, comprises a hexagonal phase at lower temperatures and a smectic phase at higher temperatures. In contrast, the trimer and tetramer reveal textures of the hexagonal phase.     

Investigations into the formation and characterization of microemulsions. I. Phase diagrams of the ternary system water—sodium alkyl benzene sulfonate—hexanol and the quaternary system water—xylene—sodium alkyl benzene sulfonate—hexanol

The phase diagrams of the ternary system water—sodium alkylbenzene sulfonate (NaDBS)-hexanol and the quaternary system water—xylene—NADBS—hexanol have been established at three different temperatures, namely 25, 37, and 50°C. The different phases formed have been qualitatively examined using optical (phase contrast and polarizing) microscopy. The textures of the various liquid crystalline phases in the ternary system have been identified, by comparison with previous studies in the literature. Some of the liquid crystalline phases have been quantitatively assessed using low angle X-ray diffraction. The latter measurements were also used to determine the unit cell dimensions in the various phases studied. With the quaternary system, particular attention was paid to the transparent region which consisted of an L₂ (inverse micellar) phase extending into another transparent region which has a blue “tinge” in some cases, namely the microemulsion (M) region. The amount of water solubilized in the L₂ (reverse micelle) or M + L₂ phase was calculated from the phase diagrams. With the ternary system the results showed a maximum in moles of water solubilized per mole total surfactant (NaDBS + hexanol) at a concentration of 0.3 mole surfactant, at an optimum molar ratio of n-hexanol to NaDBS of 4.5:1. This maximum was about twice with the quaternary system, when compared with that of the ternary system, indicating the importance of the role of xylene in solubilization of water by the surfactants. The present investigation has also shown that the extent of the microemulsion region is significantly reduced by increases of temperature when the NaDBS is lower than 15 wt%.     

Synthesis,thermal and lyotropic liquid crystalline properties of protic ionic salts

A series of protic ionic salts were synthesised by a simple acid–base reaction from various pyridine derivatives and dodecylbenzenesulfonic acid in a common organic solvent and characterised in terms of their thermal and lyotropic liquid crystalline properties using various experimental techniques. All of them exhibited lyotropic liquid crystalline phases in toluene, methanol, acetonitrile, dimethyl sulfoxide and water. Their critical concentrations for the formation of biphasic solutions and concentrations for the formation of lyotropic solutions were quite broad depending on the dielectric constants of the solvents. Their lyotropic phases were identified as lamellar phases, since their textures exhibited bâtonnets, oily streaks and mosaic textures. They can potentially be used for many organic transformations, which may have implications in green chemistry.     

Effects of the H-bond donor structure on the properties of supramolecular side chain liquid crystalline polymers based on poly(3-carboxypropylmethylsiloxane-co-dimethylsiloxane)s and stilbazoles

Supramolecular side chain liquid crystalline polymers (SCLCPs) based on poly(3-carboxypropylmethylsiloxane-co-dimethylsiloxane) (PSIX, X=100, 76, 60, 41 or 23, denoting the mole percentage of 3-carboxypropylmethylsiloxane unit in the polymer) and stilbazole derivatives have been obtained through intermolecular hydrogen bonding (H-bonding) interactions between the carboxylic acid and the pyridyl moieties. The formation of H-bonding and self-assembly results in the formation of new mesogenic units, in which H-bonds function as molecular connectors. FTIR shows the existence of H-bonding in the complexes. The polymeric complexes behave as single component liquid crystalline polymers and exhibit stable and enantiotropic mesophases. The liquid crystalline properties of the supramolecular SCLCPs were studied using differential scanning calorimetry, polarizing optical microscopy and X-ray diffraction, and were found to exhibit smectic A phases with focal-conic textures. The thermal stability of the SCLCP increases on increasing the carboxylic acid content in the polysiloxane and the concentration of the stilbazole derivative in the complex. However, the thermal stability decreases on increasing the chain length of the stilbazole derivative. The crystal phase was not formed even on cooling to the glass transition temperature of the polymeric complex.     

Influence of cooling rate on the phase transitions of ferroelectric liquid crystals, MBOPDOB and MBOPDoOB

The phase transitions of ferroelectric liquid crystals (FLCs), D-4-(2-methylbutyloxy)phenyl 4-decyloxybenzoate (MBOPDOB) and D-4-(2-methylbutyloxy)phenyl 4-dodecyloxybenzoate (MBOPDoOB), were investigated by means of differential scanning calorimetry (DSC) and polarizing microscopy. The DSC and polarizing microscopy results show that MBOPDOB and MBOPDoOB exhibit different phase transition sequences on slow cooling, whereas they have the same sequence under rapid cooling. In MBOPDoOB, we also observed a quench-induced metastable phase that differs from the normal crystal phase formed by slow cooling. The textures corresponding to the two crystal phases were observed using a polarizing microscope. X-ray diffraction (XRD) was also used to study the quench-induced phase. The influence of the alkoxy chain length on the molecular interactions in FLCs is discussed.     

Phase characterization of two homologous series of LC methacrylic monomers based on ω-hexyl- and ω-butyl-oxysalicylaldimine groups with different alkoxy tail substitutions

The phase characterization of two homologous series of liquid crystalline methacrylic monomers based on χ -hexyl- and χ -butyloxysalicylaldimine groups, with different alkoxy tails, is presented. The liquid crystalline materials were characterized by polarising optical microscopy, differential scanning calorimetry, differential thermal analysis, and X-ray diffraction. All the monomers exhibit the simultaneous occurrence of smectic A and C phases. When the alkyl chain is short, a narrow nematic phase is observed, leading to an I-N-SmA-SmC phase sequence.     

Synthesis and characterization of liquid crystalline epoxy and co-polymerisation with a non-mesomorphic epoxy resin

A novel liquid crystalline epoxy resin based on the imine group was synthesised and structurally characterised by infrared (IR) and nuclear magnetic resonance (NMR) spectroscopy. The mesogenic behaviour of the monomer was measured by differential scanning calorimetry (DSC) and polarised optical microscopy (POM), and presented various textures in the extensive temperature range. Methyl nadic anhydride (MNA) was employed to cure the liquid crystalline epoxy resin and the curing process was investigated using POM and wide-angle X-ray diffraction (WAXD). Information about distribution of liquid crystalline epoxy resin in the blending system resulted from the FT-IR Imaging System, indicating that molecules of liquid crystalline epoxy resin can agglomerate to form anisotropic domains. The improvement in mechanical properties of diglycidyl ether of biphenol A (DGEBA) modified with liquid crystalline epoxy was achieved. Scanning electronic microscopy (SEM) showed that an extremely rough and highly deformed fracture surface can be obtained. DGEBA modified with liquid crystalline epoxy resin was characterised by dynamic mechanical analysis (DMA) for its thermal properties. The results indicate that the presence of the liquid crystal phase influences glass transition temperature (Tg).     

Interface induced crystal structures of dioctyl-terthiophene thin films

Temperature dependent structural and morphological investigations on semiconducting dioctyl-terthiophene (DOTT) thin films prepared on silica surfaces reveals the coexistence of surface induce order and distinct crystalline/liquid crystalline bulk polymorphs. X-ray diffraction and scanning force microscopy measurements indicate that at room temperature two polymorphs are present: the surface induced phase grows directly on the silica interface and the bulk phase on top. At elevated temperatures the long-range order gradually decreases, and the crystal G (340 K), smectic F (348 K), and smectic C (360 K) phases are observed. Indexation of diffraction peaks reveals that an up-right standing conformation of DOTT molecules is present within all phases. A temperature stable interfacial layer close to the silica-DOTT interface acts as template for the formation of the different phases. Rapid cooling of the DOTT sample from the smectic C phase to room temperature results in freezing into a metastable crystalline state with an intermediated unit cell between the room temperature crystalline phase and the smectic C phase. The understanding of such interfacial induced phases in thin semiconducting liquid crystal films allows tuning of crystallographic and therefore physical properties within organic thin films.     

Synthesis and characterization of new liquid crystalline monomers for non-linear optics. X-ray study of re-entrant nematic behaviour with smectic-like fluctuations of C-type

The syntheses and structural properties of four liquid crystalline monomers are presented. They were prepared by two different reaction pathways. Transition temperatures and phase characterization were done by DSC, polarization microscopy and X-ray diffractometry. The dependence of phase transition temperatures on substitution of the aromatic core are discussed. Two of the compounds investigated highly ordered smectic phases. The improvement of the conjugation by means of a lateral hydroxy group disturbs the occurrence of the E re-entrant phase with smectic-like fluctuations of the C-type was observed in a compound with a lateral hydroxy group. The existence of this re-entrant nematic phase was confirmed by X-ray measurements both on cooling and heating of the sample. the alkyl chain lengths and the lateral show and B phases. The presence of a nematic     

The heat capacities and parameters of solid phase transitions and fusion for 1- and 2-adamantanols

The heat capacities of 1-adamantanol and 2-adamantanol in the condensed state were measured in a vacuum adiabatic calorimeter between (5 and 305) K and in a scanning calorimeter of the heat bridge type between (300 and 600) K. It was found that 1-adamantanol formed two different crystalline phases, and 2-adamantanol formed four different crystalline phases. The thermodynamic characteristics of the solid-to-solid phase transitions and fusion were obtained. The thermal functions of the studied compounds in the crystalline and liquid state were obtained. The high-temperature crystalline phases (crI) of both compounds had cubic face-centered lattices that followed from X-ray diffraction data. The lattice parameters were calculated.     

Effects of the H-bond donor structure on the properties of supramolecular side chain liquid crystalline polymers based on poly(3-carboxypropylmethylsiloxane-co-dimethylsiloxane)s and stilbazoles

Supramolecular side chain liquid crystalline polymers (SCLCPs) based on poly(3-carboxypropylmethylsiloxane-co-dimethylsiloxane) (PSIX, X=100, 76, 60, 41 or 23, denoting the mole percentage of 3-carboxypropylmethylsiloxane unit in the polymer) and stilbazole derivatives have been obtained through intermolecular hydrogen bonding (H-bonding) interactions between the carboxylic acid and the pyridyl moieties. The formation of H-bonding and self-assembly results in the formation of new mesogenic units, in which H-bonds function as molecular connectors. FTIR shows the existence of H-bonding in the complexes. The polymeric complexes behave as single component liquid crystalline polymers and exhibit stable and enantiotropic mesophases. The liquid crystalline properties of the supramolecular SCLCPs were studied using differential scanning calorimetry, polarizing optical microscopy and X-ray diffraction, and were found to exhibit smectic A phases with focal-conic textures. The thermal stability of the SCLCP increases on increasing the carboxylic acid content in the polysiloxane and the concentration of the stilbazole derivative in the complex. However, the thermal stability decreases on increasing the chain length of the stilbazole derivative. The crystal phase was not formed even on cooling to the glass transition temperature of the polymeric complex.