Asymmetric banana-shaped liquid crystals with two different terminal alkoxy chains

Two series of asymmetric banana-shaped compounds have been synthesized and studied. In the 1,3-phenylene bis[4-(4'-alkoxybenzoyloxy)]benzoate series the lack of symmetry was derived solely from the difference in length of the two terminal alkoxy chains. In the 3,4'-biphenylene bis[4-(4'-alkoxybenzoyloxy)]benzoate series the asymmetric nature originates from the 3,4'-substitution of the central biphenyl group and from the difference in length of the two terminal chains. All the melting points of the asymmetrical compounds in the series with the central phenyl unit are lower than those of the symmetrical compounds. The liquid crystalline B₁ or B₂ phase was retained in all cases. In the series with the central biphenyl unit the compounds with the shortest chain attached to the para-position of the central biphenyl unit have the lowest melting points. A significant lowering of the melting points in comparison with the symmetrically substituted compounds, however, could not be achieved. All the compounds of both series show a layer spacing which is comparable to those of the symmetrically substituted parent compounds. The observed switching behaviour of both the symmetric and asymmetric compounds with a B₂ phase was antiferroelectric.     

Polymerizable Ester-Type Banana Liquid Crystals: A Comparative Study of Mesophase Behavior

Two families of ester-type banana monomers are presented, 1,3-phenylene bis{4-[4′-(10-undecenyloxy)benzoyloxy]benzoate}s and 1,3-phenylene bis{[4′-(10-undecenyloxy)]-1,1′-biphenyl-4-carboxylate}s, in which the nature of the substituents on the central phenyl ring and the side arms was varied. The mesophase behavior of the monomers, including B₂ and B₇ phases, was correlated with their chemical structure and was compared with that of analogous azomethine-type banana mesogens. It is also shown that the banana monomers can be incorporated into new architectures of liquid crystal polymers.     

Substituted 2,2′‐Bis(2‐oxidobenzylideneamino)‐4,4′‐dimethyl‐1,1′‐biphenyl Complexes of Zinc

The condensation reaction of 2,2′‐diamino‐4,4′‐dimethyl‐6,6'‐dibromo‐1,1′‐biphenyl with 2‐hydroxybenzaldehyde as well as 5‐methoxy‐, 4‐methoxy‐, and 3‐methoxy‐2‐hydroxybenzaldehyde yields 2,2′‐bis(salicylideneamino)‐4,4′‐dimethyl‐6,6′‐dibromo‐1,1′‐biphenyl ( 1a ) as well as the 5‐, 4‐, and 3‐methoxy‐substituted derivatives 1b , 1c , and 1d , respectively. Deprotonation of substituted 2,2′‐bis(salicylideneamino)‐4,4′‐dimethyl‐1,1′‐biphenyls with diethylzinc yields the corresponding substituted zinc 2,2′‐bis(2‐oxidobenzylideneamino)‐4,4′‐dimethyl‐1,1′‐biphenyls ( 2 ) or zinc 2,2′‐bis(2‐oxidobenzylideneamino)‐4,4′‐dimethyl‐6,6′‐dibromo‐1,1′‐biphenyls ( 3 ). Recrystallization from a mixture of CH₂Cl₂ and methanol can lead to the formation of methanol adducts. The methanol ligands can either bind as Lewis base to the central zinc atom or as Lewis acid via a weak O–H ··· O hydrogen bridge to a phenoxide moiety. Methanol‐free complexes precipitate as dimers with central Zn₂O₂ rings.     

Synthesis of Substituted 1,5‐Dioxaspiro[2.4]heptanes from 2,3‐ Dichloroprop‐1‐ene

The 4,4′‐di(tert‐butyl)biphenyl(DTBB)‐catalyzed lithiation of 2,3‐dichloroprop‐1‐ene ( 10 ) in THF at 0°, in the presence of symmetrically substituted ketones, led to the corresponding methylene‐substituted diols 11 (Scheme 2), which, by treatment with NaH and I₂ in THF at room temperature, furnished a series of 1,5‐dioxaspiro[2.4]heptanes 14 (Scheme 4). Oxidation of compounds 14 with RuO₄ gave the corresponding lactones 16 . Compounds 14 and 16 are structural units present in many biologically active natural compounds and in versatile intermediates in synthetic organic chemistry.     

A one‐dimensional zinc(II) coordination polymer incorporating [1,1′‐biphenyl]‐4,4′‐dicarboxylate and N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide ligands

In the title compound, catena‐poly[[[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]chloridozinc(II)]‐μ‐[1,1′‐biphenyl]‐4,4′‐dicarboxylato‐[[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]chloridozinc(II)]‐μ‐[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]], [Zn₂(C₁₄H₈O₄)Cl₂(C₂₆H₂₂N₄O₂)₃]_n, the Zn^II centre is four‐coordinate and approximately tetrahedral, bonding to one carboxylate O atom from a bidentate bridging dianionic [1,1′‐biphenyl]‐4,4′‐dicarboxylate ligand, to two pyridine N atoms from two N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide ligands and to one chloride ligand. The pyridyl ligands exhibit bidentate bridging and monodentate terminal coordination modes. The bidentate bridging pyridyl ligand and the bridging [1,1′‐biphenyl]‐4,4′‐dicarboxylate ligand both lie on special positions, with inversion centres at the mid‐points of their central C—C bonds. These bridging groups link the Zn^II centres into a one‐dimensional tape structure that propagates along the crystallographic b direction. The tapes are interlinked into a two‐dimensional layer in the ab plane through N—H...O hydrogen bonds between the monodentate ligands. In addition, the thermal stability and solid‐state photoluminescence properties of the title compound are reported.     

Dependence of Mesomorphic Behaviour of Methylene‐Linked Dimers and the Stability of the NTB/NX Phase upon Choice of Mesogenic Units and Terminal Chain Length

Twelve symmetrical dimeric materials consisting of a nonamethylene (C9) spacer and either phenyl 4‐(4′‐alkylphenyl)benzoate, phenyl 4‐(4′‐alkylcyclohexyl)benzoate or phenyl 4‐(4′‐alkylbicyclohexyl)carboxylate mesogenic units were prepared and their mesogenic behaviour characterised by POM, DSC and XRD. All of the materials exhibited nematic phases with clearing points in excess of 200 °C. Four compounds were found to exhibit the twist‐bend nematic phase, with one material exhibiting a transition from the N_TB phase into an anticlinic smectic ‘X’ phase. Across all three series of compounds the length of terminal chain is seen to dictate, to some degree, the type of mesophase formed: shorter terminal chains favour nematic and N_TB mesophases, whereas longer terminal aliphatic chains were found to promote smectic phases.     

2-(4-alkylamido-2-hydroxyphenyl)benz-X-azoles as intermediates for the synthesis of dyes

Nineteen substituted 2-phenylbenz-X-azoles, which are intermediates for the synthesis of dyes, were prepared from p-aminosalicylic acid (PAS). Substituents in the phenyl ring are 2′-hydroxy and/or 4′-amino and 4′-alkylamido with alkyl chains ranging from C₁ to C₁₅. The preferred route of the synthesis is discussed. The melting points and the R_f values are correlated with the structure. An extensive discussion of the electronic absorption spectra, involving other compounds with the same general structure, is reported.     

Synthesis and mesomorphic properties of esters derived from alkanediols

New alkane-α,ω-diyl esters, propane-1,3-diyl and butane-1,4-diyl bis[4-(4-alkoxybenzoyloxy)-3-bromobenzoates], were synthesized and were found to form nematic mesophase. The effects of the lateral substituent and the length of the central and terminal hydrocarbon chains on the mesomorphic properties of butane-1,4-diyl bis[4-(4-alkoxybenzoyloxy)-3-bromobenzoates] were studied. Structural factors responsible for mesogenic properties of these compounds were determined by conformation analysis.     

Four ring achiral ferroelectric liquid crystals of 1,2,4-oxadiazoles: synthesis and characterisation

A novel series of four-ring achiral ferroelectric liquid crystals containing 1,2,4-oxadiazole cores with unsymmetrical substitutions at C-3 and C-5 positions are synthesised and characterised. A fluoro substituted biphenyl moiety is prepared by Suzuki coupling reaction and is directly attached to the oxadiazole core at the C-5 position for the first time in the literature. An octyl benzoate is attached to the oxadiazole core at the C-3 position of it. All the compounds exhibit polar smectic (B₂) mesophases with ferroelectric switching along with the orthogonal smectic-A mesophases. These compounds possess high mesomorphic thermal ranges of polar smectic phases and are towards the ambient temperatures. The influence of a more electronegative fluorine substituent on the electron rich biphenyl moiety (at the C-5 position) of the oxadiazole core is analysed for the prevalence and abundance of polar smectic (ferroelectric) mesophases.     

Dimethylsilyl- and methylene-bridged aromatic groups : II. Phosphorescent triplet states

The zero-field splitting parameters D and E, or D, were measured by electron spin spectroscopy for the triplet states of bis(4-biphenylyl)dimethylsilane, 4,4′-bis-(4-biphenylyldimethylsilyl)biphenyl, 1,2-diphenyltetramethyldisilane, several monosilanes, bis(4-biphenylyl)methane, 4,4′-bis(4-phenylbenzyl)biphenyl, and dimethyldiphenylmethane. The zero-field splitting values of compounds having biphenyl subunits bridged with either SiMe₂- or CH₂-groups, compared with those of mono- and disubstituted biphenyls, show that the triplet electrons are localized mainly on one biphenyl group in each of the bridged compounds on the time scale of the ESR observations.     

Synthesis and chirooptical properties of optically active poly(ester imide)s based on axially asymmetric 1,1′‐binaphthyls

A series of optically active poly(ester imide)s (PEsI's) has been synthesized by the polycondensation reactions of new axially asymmetric dianhydrides, that is, (R)‐2,2′‐bis(3,4‐dicarboxybenzoyloxy)‐1,1′‐binaphthyl dianhydride and (S)‐2,2′‐bis(3,4‐dicarboxybenzoyloxy)‐1,1′‐binaphthyl dianhydride, and various diamines with aromatic, semiaromatic, and aliphatic structures. The polymers have inherent viscosities of 0.45–0.70 dL/g, very good solubility in common organic solvents, glass‐transition temperatures of 124–290 °C, and good thermal stability. Wide‐angle X‐ray crystallography of these polymers shows no crystal diffraction. In comparison with model compounds, an enhanced optical rotatory power has been observed for the repeat unit of optically active PEsI's based on aromatic diamines, and it has been attributed to a collaborative asymmetric perturbation of chiral 1,1′‐binaphthyls along the rigid backbones. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4318–4326, 2004     

Conformationally Flexible Biphenyl‐phosphane Ligands for Ru‐Catalyzed Enantioselective Hydrogenation

Stereomutation of a BIPHEP/RuCl ₂ /diamine complex (shown schematically) is possible because of the conformational flexibilty of BIPHEP ligands. The result is an asymmetric activation in the Ru‐catalyzed hydrogenation of carbonyl compounds to optically active alcohols. Whereas a racemic BINAP/RuCl₂ complex with a chiral diamine activator gives a 1:1 mixture of two diastereomers, unequal amounts of the diastereomers can be produced from a BIPHEP/RuCl₂ complex and a chiral diamine. Ar=3,5‐dimethylphenyl, BINAP=2,2′‐bis(diphenylphosphanyl)‐1,1′‐binaphthyl, BIPHEP=2,2′‐bis(diarylphosphanyl)biphenyl.     

Synthesis and comparative study on polyetherimides from isomeric 4,4′-isopropylidenediphenoxy bis(phthalic anhydride)s

Two isomers of commercial 4,4′-(4,4′-isopropylidenediphenoxy) bis(phthalic anhydride) (4,4′-BPADA), that is, 3,4′-(4,4′-isopropylidenediphenoxy) bis(phthalic anhydride) (3,4′-BPADA) and 3,3′-(4,4′-isopropylidenediphenoxy) bis(phthalic anhydride) (3,3′-BPADA), were synthesized through aromatic nucleophilic substitution from nitrophthalonitrile and bisphenol A. 3,4′-BPADA was first synthesized from two intermediates, that is, 3-(4-[4-hydroxyphenylisopropylidene] phenoxy) phthalonitrile (3-BPADN) and 3,4′-(4,4′-isopropylidenediphenoxy) bis(phthalonitrile) (3,4′-BPATN). The corresponding three series of polyetherimides (PEIs) were prepared with two representative aromatic diamines (4,4′-oxydianiline and m-phenylenediamine (m-PDA)) via two-step procedure and chemical imidization. Isomeric polyimides showed T_gs from 206 to 256°C in nitrogen and T_d5%s from 488 to 511°C in argon, good mechanical properties (tensile moduli of 2.3–3.3 GPa, tensile strengths of 70–96 MPa, and elongations at break of 3.2%–5.1%), and good solubility. With the introduction of 3-substituted phthalimide unit, PEIs displayed higher T_g values, lower strengths and elongations, better solubility and larger d-spacings. The rheological properties of thermoplastic polyimide resins based on the BPADA isomers were investigated, which showed that polyetherimide PEI-3b derived from 3,3′-BPADA and m-PDA had the lowest melt viscosity among the isomers, indicating that the melt processibility had been greatly improved.     

Effect of lateral substitution by fluorine and bromine atoms in ferroelectric liquid crystalline materials containing a 2‐alkoxypropanoate unit

Two homologous series of ferroelectric liquid crystalline compounds with 2‐alkoxypropanoate chiral unit containing biphenyl benzoate core laterally substituted by fluorine and bromine have been synthesized and studied. All compounds possess the ferroelectric smectic C* phase over a broad temperature range. For bromine‐substituted compounds values of spontaneous polarization reach high values up to 250 nC cm^?2. The effects of the lateral substitution on the phenyl ring far from the chiral centre by methyl and methoxy groups, fluorine, chlorine and bromine atoms on mesomorphic properties and on values of the spontaneous polarization are discussed.     

Pyridazines 92. Synthesis of dialkyldipyridazinodiazepinones as potential HIV‐1 reverse transcriptase inhibitors

Two methods for the preparation of dialkylsubstituted dipyridazino[4,3‐b:3′,4′‐e][1,4]diazepinones and dipyridazino[3,4‐b:3′,4′‐e][1,4]diazepinones are reported. The new compounds were evaluated for their inhibitory effects against the replication of human immunodeficiency virus [HIV‐1(III_B) and HIV‐2(ROD)] in MT‐4 cells.     

对二氨基二苯型芳酰胺类液晶化合物的合成与表征

液晶作为新型材料,在高新技术领域显示出越来越广阔的应用前景,目前科学界对各种类型的液晶,包括主链型,侧链型液晶以及热固性液晶方面的研究非常活跃~([1-4]).含有端烯类双键的液晶化合物,可以通过双键联结到高分子链上,形成高分子液晶化合物,也可与其它烯类单体发生共聚合反应,制备液晶热固性树脂,还可以通过双键氧化,制备液晶环氧树脂,因此有广泛的应用前景~([5,6]).     

N‐(4‐Biphenylmethyl)imidazoles as Potential Therapeutics for the Treatment of Prostate Cancer: Metabolic Robustness Due to Fluorine Substitution?

3,3′,5,5′‐ And 2,2′,6,6′‐tetrafluoro‐substituted 1‐[(1,1′‐biphenyl]‐4‐yl)methyl]‐1H‐imidazoles were synthesized as inhibitors of 17α‐hydroxylase‐C17,20‐lyase (P450 17, CYP 17). P450 17 is the key enzyme of androgen biosynthesis. Its inhibition is a novel therapeutic approach for treatment of prostate cancer. To increase the so‐far insufficient in vivo lifetime of such compounds, the metabolically sensitive positions were blocked by F‐substitution. The meta‐ and ortho‐F‐substituted compounds were prepared by selective metallation or halogen/metal permutation reactions performed on symmetrically substituted 1,1′‐biphenyls. Compared with the halogen‐free compounds, the ortho‐F‐substituted derivatives did not match the activity, whereas the meta‐F‐substituted isomers equaled or surpassed the latter.     

Construction Of Two New 6‐connected Manganese(II) Metal Organic Frameworks via Isomeric Biphenyldicarboxylates Based on the Dinuclear Secondary Building Unit

Two coordination polymers, namely {[Mn(2,4′‐bpdc)(bimb)(H₂O)_0.5] · 0.5H₂O}_n ( 1 ) and [Mn(4,4′‐bpdc)(bimb)]_n · 2.5H₂O ( 2 ) [2,4′‐bpdc = biphenyl‐2,4′‐dicarboxylate, 4,4′‐bpdc = biphenyl‐4,4′‐dicarboxylate, and bimb = 1,4‐bis(1‐imidazol‐yl)‐2,5‐dimethyl benzene], were hydrothermally synthesized by reactions of manganese(II) salt with the rigid ligand 1,4‐bis(1‐imidazol‐yl)‐2,5‐dimethyl benzene and isomeric biphenyl dicarboxylate ligands. Complex 1 has an unusual 6‐connected three‐dimensional (3D) architecture with point symbol (4⁴.6¹¹). Complex 2 has also a 3D structure with two‐interpenetrated pcu topology with point symbol (4¹².6³). Structural comparisons show that the positions of the carboxylate groups in the ligand backbone play an important role in governing the structural topologies of these complexes.     

Biphenyl‐ and phenylnaphthalenyl‐substituted 1H‐imidazole‐4,5‐dicarbonitrile catalysts for the coupling reaction of nucleoside methyl phosphonamidites

Crystal structures are reported for three substituted 1H‐imidazole‐4,5‐dicarbonitrile compounds used as catalysts for the coupling reaction of nucleoside methyl phosphonamidites, namely 2‐(3′,5′‐dimethylbiphenyl‐2‐yl)‐1H‐imidazole‐4,5‐dicarbonitrile, C₁₉H₁₄N₄, (I), 2‐(2′,4′,6′‐trimethylbiphenyl‐2‐yl)‐1H‐imidazole‐4,5‐dicarbonitrile, C₂₀H₁₆N₄, (II), and 2‐[8‐(3,5‐dimethylphenyl)naphthalen‐1‐yl]‐1H‐imidazole‐4,5‐dicarbonitrile, C₂₃H₁₆N₄, (III). The asymmetric unit of (I) contains two independent molecules with similar conformations. There is steric repulsion between the imidazole group and the terminal phenyl group in all three compounds, resulting in the nonplanarity of the molecules. The naphthalene group of (III) shows significant deviation from planarity. The C—N bond lengths in the imidazole rings range from 1.325 (2) to 1.377 (2) Å. The molecules are connected into zigzag chains by intermolecular N—H...N_imidazole [for (I)] or N—H...·N_cyano [for (II) and (III)] hydrogen bonds.     

Mesomorphism of a banana mesogen: influence of a fluoro substituent in the central core

The results of experiments with stable five-ring banana-shaped molecules consisting of laterally 4-fluoro substituted 1,3-phenylene ring as the central unit in Bis-[4-(4′-n-alkyloxybenzoyloxy)salicylidene]-phenylene-4-fluoro-1,3-diamines are presented. These compounds are thermally and hydrolytically stable due to intermolecular or intramolecular hydrogen bonding and exhibit SmCP_A and low-temperature crystalline B_X phases. The phases had been characterised by thermal microscopy and differential scanning calorimetry. A representative example has also been characterised by X-ray diffraction studies and electric field effects. The influence of a lateral fluoro substituent in the central core is clearly demonstrated with the induction of the SmCP_A phase which is absent in the parent compound without the substituent. Further these compounds exhibit a large tilt angle. We also describe a comparison of phase behaviour with similar analogous compounds, taking the position of fluoro substitution, changes in the linking groups and the direction of the linking groups into consideration.