纳米Ag/TiO_(2)纳米管阵列基底构建及表面增强拉曼散射光谱检测与降解盐酸四环素北大核心CSCD

将阳极氧化与光还原法结合,在TiO_(2)纳米管阵列(TiO_(2)NTAs)表面修饰Ag纳米粒子,获得一种均匀有序、稳定性高且可循环的TiO_(2)NTAs/Ag活性基底。采用X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、紫外可见漫反射光谱(UV-Vis DRS)、表面增强拉曼散射光谱(SERS)和扫描电子显微镜(SEM)等手段对TiO_(2)NTAs/Ag的组成和结构进行了表征。进一步研究了该TiO_(2)-NTAs/Ag阵列对盐酸四环素(TC-HCl)的SERS响应,结果表明,该复合基底对TC-HCl具有较高的检测灵敏度,在水中检测限可达1×10^(−14) mol/L,而TiO_(2)-NTAs与Ag之间的协同效应对其检测性能的提高起着关键作用。此外,TiO_(2)NTAs/Ag基底在光照下对TC-HCl展示了优异的降解活性,且至少可循环使用8次。表明该TiO_(2)NTAs/Ag基底在环境中有机污染物的SERS检测和降解领域具有潜在的应用前景。     

电沉积Cu_2O在无酶葡萄糖传感器中的应用

采用电化学沉积法在玻碳电极表面制备了Cu_2O,利用X射线衍射(XRD)和扫描电镜(SEM)对Cu_2O的微观结构和表面形貌进行了表征,通过循环伏安法和计时电流法研究了Cu_2O对葡萄糖的电催化氧化性能。结果表明:该修饰电极对葡萄糖有良好催化作用,葡萄糖检测的线性范围为5.0μmol/L~6.23mmol/L,检测限(S/N=3)为0.4μmol/L。该传感器制备简单,稳定性和重复性好,可用于实际样品的测定。     

纳米Cu_2O/氮掺杂石墨烯复合修饰电极对多巴胺的电化学分析研究

本文通过化学还原法制备纳米Cu_2O/氮掺杂石墨烯(NG)复合材料,用于构建一种新型的多巴胺(DA)电化学传感器。采用X射线衍射法和扫描电镜对纳米Cu_2O/氮掺杂石墨烯复合材料进行表征。在pH为7.0的磷酸盐缓冲液中,采用循环伏安法和计时电流法分别研究了DA在纳米Cu_2O/氮掺杂石墨烯复合修饰电极上的电化学行为。结果表明,该修饰电极对DA表现出显著的电催化活性,且DA在修饰电极上的反应受吸附控制。在最佳实验条件下,催化电流与DA的浓度在0.5~700μmol/L之间呈线性关系(r=0.9943),检测限达0.17μmol/L。该修饰电极的选择性高、重复性和再现性好。方法用于实际样品中DA的检测,获得结果较好。     

Cu_3(PO_4)_2/TiO_2复合材料的制备及可见光催化性能研究

利用化学沉淀的方法,制备了一系列不同比例的Cu_3(PO_4)_2/TiO_2复合材料.采用紫外-可见漫反射谱(UV-Vis DRS)、X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)等手段,对Cu_3(PO_4)_2/TiO_2系列光催化剂进行了表征与分析.通过丙烯的光催化降解实验考察样品的可见光催化活性.结果表明,相比于纯Ti O2,Cu_3(PO_4)_2/TiO_2复合材料具有明显的可见光催化活性,当Cu3(PO4)2与Ti O2的质量比为2.5∶10时光催化活性最高,对丙烯的降解率达到46%.     

金纳米颗粒在不同包裹介质中的超快等离子体动力学（英文）

为了探究不同包裹介质对金纳米颗粒的超快等离子体动力学的影响,本文我们制备了聚苯乙烯磺酸钠(PSS)、二氧化硅(SiO_2)、二氧化钛(TiO_2)以及氧化亚铜(Cu_2O)四种介质包裹的金纳米颗粒。运用飞秒泵浦探测技术,我们分别获得了PSS、SiO_2、TiO_2以及Cu_2O包裹的金纳米颗粒在不同时间延迟下的飞秒瞬态吸收光谱。我们发现TiO_2包裹的金纳米颗粒的飞秒瞬态吸收光谱特征与PSS和SiO_2包裹的金纳米颗粒的飞秒瞬态吸收光谱特征有很大的不同,但与Cu2O包裹的金纳米颗粒的飞秒瞬态吸收光谱特征相似。全面分析PSS、SiO_2、TiO_2和Cu_2O包裹的金纳米颗粒的超快等离子体动力学行为,我们发现在TiO_2和Cu2O包裹的金纳米颗粒体系中光激发金纳米颗粒的等离子体共振吸收后产生的激发电子可以有效地转移到TiO_2和Cu_2O的导带上。     

不同表面形貌Cu2O空心球的制备及光催化性能

采用一步溶剂热法,以Cu(NO_3)_2·3H_2O为铜源,乙二醇(EG)为还原剂,聚乙烯吡咯烷酮(PVP)为表面活性剂,高温条件下制备形貌可控的Cu_2O空心球纳米材料。研究Cu(NO_3)_2·3H_2O与PVP的质量比值(w_(Cu(NO_3)_2·3H_2O)/w_(PVP))对Cu2O结构、形貌、比表面积以及光吸收特性的影响,并结合光催化机理讨论其对Cu_2O光催化性能的影响。此外,通过改变反应时间来研究Cu_2O的生长过程。结果表明,w_(Cu(NO_3)_2·3H_2O)/w_(PVP)=45时,得到的形貌为空心球表面覆盖纳米刺的Cu_2O纳米材料光催化性能最佳,在可见光辐照10 min的条件下,对甲基橙的降解率达94.3%。     

RuO_2/MWNTs纳米复合材料用于无酶型葡萄糖传感器的研究

采用水热合成法在多壁碳纳米管(MWNTs)上负载了Ru O2纳米颗粒,并以Nafion为固定剂将复合材料修饰于玻碳电极的表面,制备了一种新型无酶型葡萄糖传感器。利用扫描电镜(SEM)、X射线衍射(XRD)、电化学方法对复合材料进行表征,发现碳纳米管上的Ru O2为纳米级,分散均匀。该复合材料修饰的电极对葡萄糖响应电流明显,并且受抗坏血酸(AA)、多巴胺(DA)和尿酸(UA)的干扰小。采用安培法测定葡萄糖,其线性范围为1.0×10-5~1.2×10-2 mol/L(R2=0.998),灵敏度41.826μA cm-2(mmol/L)-1,检测限2.2×10-5 mol/L(信噪比为3),响应时间5.2 s,具有较好的稳定性。     

核壳结构纳米Cu_2O/Ag的制备、表征和应用研究

通过溶胶-凝胶法制备了单分散性的球形纳米Cu_2O,采用取代反应法在上面负载一层纳米Ag,制备了核壳结构的Cu_2O/Ag纳米复合材料。利用透射电镜(TEM)分析了纳米Cu_2O/Ag的形貌,并用X射线衍射测(XRD)X射线光电子能谱(XPS)分析了其物相组成,利用紫外-可见光谱(UV-Vis)和光致发光光谱(PL)研究了其光谱特征,以罗丹明B(Rh B)为模型污染物,在紫外光照射下评价了纳米Cu_2O/Ag的光催化活性。结果表明:Cu_2O平均直径为150nm,表面纳米银直径为7nm,形成核壳结构;光催化结果显示,银沉积显著提高了Cu_2O的光催化活性。     

纳米TiO_2膜修饰电极异相电催化还原马来酸

通过电化学合成前驱体和溶胶-凝胶法在Ti表面修饰一层纳米TiO_2膜，SEM， XRD测试表明晶型为锐钛矿型，晶粒平均尺寸为25 nm。采用循环伏安法、循环方波 伏安法和电解合成法研究了纳米TiO_2膜电极在硫酸介质中的氧化还原行为以及对 马来酸（maleic acid）还原的电催化活性。结果表明，纳米TiO_2膜电极在阴极扫 描时有两对可逆氧化还原峰，可逆半波电位E_(1/2)~r分别为-0.53 V和-0.92 V（ sv. SCE，扫描速度0.05 V·s~(-1)），对应于TiO_2/Ti_2O_3和TiO_2/Ti(OH)_3两 个氧化还原电对的可逆电极过程。其中TiO_2/Ti_2O_3电对对马来酸具有异相电催 化还原活性，纳米TiO_2膜中的Ti~(IV)/Ti~(III)氧化还原电对作为媒质间接电还 原马来酸为丁二酸（butane diacid），反应机理为电化学偶联随后化学催化反应 （EC'）机理。     

金纳米粒子修饰的三维花状二硫化钼复合材料的制备及其用于检测过氧化氢的研究

以Na_2MoO_4·2H_2O为钼源,硫脲为硫源和还原剂,氧化多壁碳纳米管(o-MWNTs)和氧化石墨烯(GO)为原料,采用水热法合成了三维花状MoS_2/GO/o-MWNTs纳米复合材料,并进一步采用原位还原法将金纳米粒子修饰至MoS_2/GO/o-MWNTs纳米复合材料表面。通过场发射扫描电镜、透射电镜、XRD、XPS等对上述复合材料进行表征。结果表明,该复合纳米材料具有3D花状球结构,且Au纳米粒子已成功生长在其花瓣状片层上。采用滴涂法制得该复合材料修饰的玻碳电极,研究了过氧化氢在该电极上的电化学行为。结果表明:该电极对过氧化氢的电还原表现出强催化活性。通过对不同浓度过氧化氢的催化还原,得出该电极对过氧化氢的线性范围为12.0×10~(-9)～31.0×10~(-6) mol/L,灵敏度为56.6μA/(mmol·L~(-1)),检出限为12.0×10~(-9) mol/L。     

Syntheses of 2-hydroperoxy-and 2-hydroxy-2H-imidazoles

Oxidation of fully substituted imidazoles 1 by singlet oxygen gives in good yield fully substituted 2-hydroperoxy-2H-imidazoles 2 . Reduction of 2 by triphenylphosphine leads to 2-hydroxy-2H-irnidazoles 3 . Limitations of the methods are reported.     

Crystal Structures of [Bu2Sn(O2PPh2)2], [Ph2Sn(O2PPh2)2], and [PhClSn(O2PPh2)OMe]2. Raman Spectra of [Ph2Sn(O2PPh2)2] and [PhClSn(O2PPh2)OMe]2

[(n‐Bu)₂Sn(O₂PPh₂)₂] ( 1 ), and [Ph₂Sn(O₂PPh₂)₂] ( 2 ) have been synthesized by the reactions of R₂SnCl₂ (R=n‐Bu, Ph) with HO₂PPh₂ in Methanol. From the reaction of Ph₂SnCl₂ with diphenylphosphinic acid a third product [PhClSn(O₂PPh₂)OMe]₂ ( 3 ) could be isolated. X‐ray diffraction studies show 1 to crystallize in the monoclinic space group P2₁/c with a = 1303.7(1) pm, b = 2286.9(2) pm, c = 1063.1(1) pm, β = 94.383(6)°, and Z = 4. 2 crystallizes triclinic in the space group , the cell parameters being a = 1293.2(2) pm, b = 1478.5(4) pm, c = 1507.2(3) pm, α = 98.86(3)°, β = 109.63(2)°, γ = 114.88(2)°, and Z = 2. Both compounds form arrays of eight‐membered rings (SnOPO)₂ linked at the tin atoms to form chains of infinite length. The dimer 3 consists of a like ring, in which the tin atoms are bridged by methoxo groups. It crystallizes triclinic in space group with a = 946.4(1) pm, b = 963.7(1) pm, c = 1174.2(1) pm, α = 82.495(6)°, β = 66.451(6)°, γ = 74.922(6)°, and Z = 1 for the dimer. The Raman spectra of 2 and 3 are given and discussed.     

Electrochemical study of (NEt4)2Cl2FeS2MoS2 and (NEt4)2Cl2FeS2MoS2FeCl2

Summary The ability of [MoS₄]^2–, anions to be used as ligands for transition metal ions has been widely demonstrated, especially with Fe²⁺. The present study has been restricted to linear complexes such as (NEt₄)₂ [Cl₂FeS₂MoS₂] and (NEt₄)₂[Cl₂FeS₂MoS₂FeCl₂]. Their electrochemical properties are described: upon electrochemical reduction, these compounds yield MoS₂, as a black precipitate, and an iron complex in solution, assumed to be [SFeCl₂]^2–. The electrochemical reduction goes through two electron transfers, coupled with the breakdown of the molecular skeleton: a DISPl and an ECE mechanism. Depending on the solvent, the following equilibrium may be observed: [Cl₄Fe₂MoS₄]^2–[Cl₂FeMoS₄]^2–+FeCl₂. The equilibrium constant, K_D, was evaluated by differential pulse polarography. K_D is tightly related to the donor number of the solvent.     

Photocycloaddition of 2-Cyanocycloalk-2-Enones to 2, 3-Dimethylbut-2-Ene

Irradiation of 5,5-dimethyl-6-oxocyclohex- l-ene- l-carbonitrile ( 1 ) in the presence of 2,3-dimethylbut-2-ene afforded 3,3,4,4,7,7-hexamethyl-3,4,4a,5,6,7-hexahydroindeno[1,7-c,d]-],2-oxazole (3) in nearly quantitative yield. In contrast, 4,4-dimethyl-5-oxo-cyclopent-l-ene-l-carbonitrile ( 2 ) under the same conditions reacted not to a tricyclic isoxazole but to a 2:1 mixture of 3,3,6,6,7,7-hexamethyl-2-oxo-bicyclo[3.2.0]heptane-l-carbonitrile ( 4 ) and trans-3,3-dimethyl-2-oxo-5-(2,3-dimethylbut-3-en-2-yl)cyclopentane-l-carbonitrile ( 5 ), respectively.     

Thermal decomposition of Me3SnO2PCl2, Me2Sn(O2PCl2)2 and Ph3SnO2PCl2

TG and DTA studies on Me₃SnO₂PCl₂, Me₂Sn(O₂PCl₂)₂ and Ph₃SnO₂PCl₂ were carried out under dynamic argon atmosphere. The results show that the decomposition proceeds in different stages leading to the formation of Sn₃(PO₄)₂ as a stable product. This compound was characterized by IR spectroscopy. Decomposition schemes involving reductive elimination reactions were proposed.     

Efficient C2 functionalisation of 2H-2-imidazolines

Alkylation and oxidation of 2H-2-imidazolines, followed by regioselective deprotection, thionation and microwave-assisted Liebeskind-Srogl reaction, efficiently led to 2-aryl-2-imidazolines as new analogues of p53-hdm2 interaction inhibitors (Nutlins).