Modeling and verification of melanin concentration on human skin type

Lasers are used in the minimalistic or noninvasive diagnosis and treatment of skin disorders. Less laser light reaches the deeper skin layers in dark skin types, due to its higher epidermal melanin concentration compared with lighter skin. Laser–tissue interaction modeling software can correct for this by adapting the dose applied to the skin. This necessitates an easy and reliable method to determine the skin’s type. Noninvasive measurement of the skin’s melanin content is the best method. However, access to samples of all skin types is often limited and skin‐like phantoms are used instead. This study’s objective is to compare experimentally measured absorption features of liquid skin‐like phantoms representing Skin Types I–VI with a realistic skin computational model component of ASAP^®. Sample UV–VIS transmittance spectra were measured from 370 to 900 nm and compared with simulated results from ASAP^® using the same optical parameters. Results indicated nonmonotonic absorption features towards shorter wavelengths, which may allow for more accurate ways of determining melanin concentration and expected absorption through the epidermal layer. This suggests possible use in representing optical characteristics of real skin. However, a more comprehensive model and phantoms are necessary to account for the effects of sun exposure.     

Voltammetric Immunoassay for the Detection of Protein Biomarkers

A strategy for a fast (ca. 20 min), specific, electrochemical immunoassay for the cardiac biomarker creatine kinase (CK) and the human cytokine interleukin 10 (IL10) has been developed in this paper. The polyaniline modified gold surface formed from electrochemical reduction of diazonium salt supplies a solid substrate to link the activated carboxylic acid groups from the antibodies, which were labelled with ferrocene. The direct electrochemistry of ferrocene allows the analysis of protein markers with good sensitivity. The creatine kinase sensor demonstrates limit of detection of 0.5 pg mL^?1 in a physiological Krebs‐Henseleit solution. The anti‐IL10 antibody retained fluorescence activity after further coupling to ferrocene and covalent immobilization on to a gold electrode, showing a linear detection range for IL‐10 from 0.001 ng mL^?1 to 50 ng mL^?1 in PBS. We attribute the high sensitivity to the well‐controlled modified surface which results in end–on antibodies that can specifically capture the antigen with ease.     

Biomodulation of Inflammatory Cytokines Related to Oral Mucositis by Low‐Level Laser Therapy

This study evaluated the effects of LLLT on the expression of inflammatory cytokines related to the development of oral mucositis by gingival fibroblasts. Primary gingival fibroblasts were seeded on 24‐well plates (10⁵ cells/well) for 24 h. Fresh serum‐free culture medium (DMEM) was then added, and cells were placed in contact with LPS (Escherichia coli, 1 μg mL^?1), followed by LLLT irradiation (LaserTABLE—InGaAsP diode prototype—780 nm, 25 mW) delivering 0, 0.5, 1.5 or 3 J cm^?². Cells without contact with LPS were also irradiated with the same energy densities. Gene expression of TNF‐α, IL‐1β, IL‐6 and IL‐8 was evaluated by Real‐Time PCR, and protein synthesis of these cytokines was determined by enzyme‐linked immunosorbent (ELISA) assay. Data were statistically analyzed by the Kruskal–Wallis test, complemented by the Mann–Whitney test (P < 0.05). LPS treatment increased the gene expression and protein synthesis of TNF‐α, IL‐6 and IL‐8, while the expression of IL‐1β was not affected. For LPS‐treated groups, LLLT promoted significant decreases in the expression of TNF‐α, IL‐6, and IL‐8 at 1.5 J cm^?2 and 3 J cm^?2. These results demonstrate that LLLT promoted a beneficial biomodulatory effect on the expression of inflammatory cytokines related to oral mucositis by human gingival fibroblasts.     

Electrochemical Oxidative Detection of Guanosine‐5′‐triphosphate Based on a New Ionic Liquid Modified Carbon Paste Electrode

An ionic liquid (IL) 1‐(3‐chloro‐2‐hydroxy‐propyl)‐3‐methylimidazolium trifluoroacetate was used as the modifier for the preparation of the modified carbon paste electrode (CPE). The IL‐CPE showed excellent electrocatalytic activity towards the oxidation of guanosine‐5′‐triphosphate (5′‐GTP) in a pH 5.0 Britton‐Robinson buffer solution. Due to the presence of high conductive IL on the electrode surface, the electrooxidation of 5′‐GTP was greatly promoted with a single well‐defined irreversible oxidation peak appeared. The electrode reaction was an adsorption‐controlled process and the electrochemical parameters of 5′‐GTP on IL‐CPE were calculated with the electron transfer coefficient (α) as 0.44, the electron transfer number (n) as 1.99, the apparent heterogeneous electron transfer rate constant (k_s) as 2.21 × 10^?9 s^?1 and the surface coverage (Γ_T) as 1.53 × 10^?10 mol cm^?2. Under the selected conditions a linear calibration curve between the oxidation peak currents and 5′‐GTP concentration was obtained in the range from 2.0 to 1000.0 μmol L^?1 with the detection limit as 0.049 μmol L^?1 (3σ) by differential pulse voltammetry. The proposed method showed good selectivity to the 5‘‐GTP detection without the interferences of coexisting substances and the practical application was checked by measurements of the artificial samples.     

Immobilization and Bioelectrochemistry of Hemoglobin Based on Carrageenan and Room Temperature Ionic Liquid Composite Film

A novel biopolymer/room‐temperature ionic liquid composite film based on carrageenan, room temperature ionic liquid (IL) [1‐butyl‐3‐methylimidazolium tetra?uoroborate ([BMIM]BF₄)] was explored for immobilization of hemoglobin (Hb) and construction of biosensor. Direct electrochemistry and electrocatalytic behaviors of Hb entrapped in the IL‐carrageenan composite ?lm on the surface of glassy carbon electrode (GCE) were investigated. UV‐vis spectroscopy demonstrated that Hb in the IL‐carrageenan composite ?lm could retain its native secondary structure. A pair of well‐de?ned redox peaks of Hb was obtained at the Hb‐IL‐carrageenan composite ?lm modi?ed electrode through direct electron transfer between the protein and the underlying electrode. The heterogeneous electron transfer rate constant (k_s) was 2.02 s^?1, indicating great facilitation of the electron transfer between Hb and IL‐carrageenan composite film modi?ed electrode. The modi?ed electrode showed excellent electrocatalytic activity toward reduction of hydrogen peroxide with a linear range of 5.0×10^?6 to 1.5×10^?4 mol/L and the detection limit was 2.12×10^?7 mol/L (S/N=3). The apparent Michaelis‐Menten constant K_M^app for hydrogen peroxide was estimated to be 0.02 mmol/L, indicating that the biosensor possessed high af?nity to hydrogen peroxide. In addition, the proposed biosensor showed good reproducibility and stability.     

Synthesis and characterization of anhydrous conducting polyimide/ionic liquid complex membranes via a new route for high‐temperature fuel cells

The paper deals with the synthesis and characterization of a new series of anhydrous conducting acid‐doped complex membranes based on polyimide (PI) and ionic liquid (IL) for high‐temperature fuel cells via a new route. For this purpose, three imidazolium‐based ILs (RIm⁺BF₄^?) with different alkyl chain lengths (R=methyl, ethyl, and butyl) are added into polyamic acid (PAA) intermediate prepared from the reaction of benzophenonetetracarboxylic dianhydride and diaminodiphenylsulfone in different –COOH/imidazolium molar ratios (n = 0.5, 1, and 2). Then, the thermally imidized complex membrane was doped with H₂SO₄. The conductivities of acid‐doped PI/IL complex membranes prepared by taking n of 1 are found to be in the range of 10^?4?10^?5 S cm^?1 at 180°C, whereas the acid‐free PI/IL complex membranes show the conductivity at around 10^?9?10^?10 S cm^?1. Thermogravimetric analysis results reveal that the acid‐doped PI/IL complex membranes are thermally stable up to 250°C. Dynamic mechanical analysis results of the acid‐doped ionically interacted complex membrane show that the mechanical strengths of the PI/IL complex membranes including 1‐methyl imidazolium tetrafluoroborate (MeIm‐BF₄) and 1‐ethyl 3‐methyl imidazolium tetrafluoroborate (EtIm‐BF₄) are comparable with those of pristine PI until 200°C. Furthermore, it can be clearly emphasized that the ionic interaction between carboxylic acid groups of PAA's and IL's cations offers a positive role in long‐term conductivity stability by preventing the IL migration at high temperatures. On the other hand, preliminary methanol permeability tests of the acid‐doped membranes show that they can also be considered as an alternative for direct methanol fuel cells. Copyright © 2011 John Wiley & Sons, Ltd.     

Transport Properties and Phase Behaviour in Binary and Ternary Ionic Liquid Electrolyte Systems of Interest in Lithium Batteries

A binary ionic liquid (IL) system based on a common cation, N‐methyl‐N‐propylpyrrolidinium (C₃mpyr⁺), and either bis(trifluoromethanesulfonyl)imide (NTf₂^?) or bis(fluorosulfonyl) imide (FSI^?) as the anion is explored over its entire composition range. Phase behavior, determined by DSC, shows the presence of a eutectic temperature at 247 K and composition around an anion ratio of 2:1 (FSI^?:NTf₂^?) with the phase diagram for this system proposed (under the thermal conditions used). Importantly for electrochemical devices, the single phase melting transition at the eutectic is well below ambient temperatures (247 K). To investigate the effect of such anion mixing on the lithium ion speciation, conductivity and PFG–NMR diffusion measurements were performed in both the binary IL system as well as the Li‐NTf₂‐containing ternary system. The addition of the lithium salt to the mixed IL system resulted in a decrease in conductivity, as is commonly observed in the single‐component IL systems. For a fixed lithium salt composition, both conductivity and ion diffusion have linear behaviour as a function of the anion ratio, however, the rate of change of the diffusion coefficient seems greater in the presence of lithium. From the application point of view, the addition of the FSI^? to the NTf₂^? IL results in a considerable increase in lithium ion diffusivity at room temperature and no evidence of additional complex ion behaviour.     

A Triphenyl Amine‐Based Solvatofluorochromic Dye for the Selective and Ratiometric Sensing of OCl− in Human Blood Cells

A new visible‐light‐excitable fluorescence ratiometric probe for OCl^? has been developed based on a triphenylamine‐diamiomaleonitrile (TAM) moiety. The structure of the dye was confirmed by single‐crystal X‐ray analysis. It behaves as a highly selective and sensitive probe for OCl^? over other analytes with a fast response time (～100 s). OCl^? reacts with the probe leading to the formation of the corresponding aldehyde in a mixed‐aqueous system. The detection limit of the probe is in the 10^?8 M range. The probe (TAM) also exhibits solvatofluorochromism. Changing the solvent from non‐polar to polar, the emission band of TAM largely red‐shifted. Moreover, the probe shows an excellent performance in real‐life application in detecting OCl^? in human blood cells. The experimentally observed changes in the structure and electronic properties of the probe after reaction with OCl^? were studied by DFT and TDDFT computational calculations.     

Electrochemical Determination of Ascorbic Acid in Room Temperature Ionic Liquid BPPF6 Modified Carbon Paste Electrode

A room temperature ionic liquid N‐butylpyridinium hexafluorophosphate (BPPF₆) was used as a binder to make an ionic liquid modified carbon paste electrode (IL‐CPE), which showed good characteristics such as simple preparation procedure, fast electrochemical response and good conductivity. The electrochemical oxidation of ascorbic acid (AA) on the new IL‐CPE was carefully studied. The oxidation peak potential of AA on the IL‐CPE appeared at 109 mV (vs. SCE), which was about 338 mV decrease of the overpotential compared to that obtained on the traditional carbon paste electrode (CPE) and the oxidation peak current was increased for about four times. The electrochemical parameters of AA on the IL‐CPE were calculated with the charge transfer coefficient (α) and the electrode reaction rate constant (k_s) as 0.87 and 0.800 s^?1, respectively. Based on the relationship of the oxidation peak current and the concentration of AA a sensitive analytical method was established with cyclic voltammetry. The linear range for AA determination was in the range from 1.0×10^?5 to 3.0×10^?3 mol/L with the linear regression equation as I_p (μA)=?2.52–0.064C (μmol/L) (n=13, γ=0.9942) and the detection limit was calculated as 8.0×10^?6 mol/L (3σ). The proposed method was free of the interferences of coexisting substances such as dopamine (DA) and amino acids etc., and successfully applied to the vitamin C tablets determination.     

Guinea Pig Skin,a Model for Epidermal Cellular and Molecular Changes Induced by UVR in vivo and in vitro: Effects on Mycobacterium bovis Bacillus Calmette–Guérin Vaccination

Previously, we reported that ultraviolet B‐radiation (UVR) suppressed Bacillus Calmette–Guérin (BCG) vaccine‐induced resistance to Mycobacterium tuberculosis in guinea pigs (GP). Herein, we investigated the cellular and molecular changes within the irradiated GP epidermis and the in vivo effect of supernatants from UV‐irradiated (200 J m^?2) epidermal cells (UV‐sup) on M. bovis BCG vaccination. UVR increased the number of nucleated keratinocytes in the skin, but caused a decrease in the proportions of CD25⁺T cells. In the spleen, UVR resulted in a decrease in the proportions of T‐cell subsets including CD25⁺T cells, and major histocompatibility complex (MHC) class II⁺ and CD14⁺ cells. Similarly, significant up‐regulation of several cytokine mRNAs including IL‐10 was also observed. Furthermore, UV‐sup significantly reduced the MHC class II expression in peritoneal cells and reduced T‐cell proliferation to ConA. The proliferation to purified protein derivative (PPD) was restored to normal levels by anti‐IL‐10 antibody. The UV‐sup when injected into BCG‐vaccinated GP significantly diminished the skin test response and T‐cell proliferation to PPD and up‐regulated the expression of IL‐10, IL‐4, IL‐1β and Foxp3 mRNAs in the lymph node or spleen. Thus, whole body UVR induces profound cellular and molecular changes and injection of UV‐sup from epidermal cells mimics the effect of whole body UVR in BCG‐vaccinated GP.     

Hybrid Curdlan Poly(γ ‐Glutamic Acid) Nanoassembly for Immune Modulation in Macrophage

A nanoformulation composed of curdlan, a linear polysaccharide of 1,3‐β‐linked d ‐glucose units, hydrogen bonded to poly(γ ‐glutamic acid) (PGA), was developed to stimulate macrophage. Curdlan/PGA nanoparticles (C‐NP) are formulated by physically blending curdlan (0.2 mg mL^?1 in 0.4 m NaOH) with PGA (0.8 mg mL^?1). Forster resonance energy transfer (FRET) analysis demonstrates a heterospecies interpolymer complex formed between curdlan and PGA. The ¹H‐NMR spectra display significant peak broadening as well as downfield chemical shifts of the hydroxyl proton resonances of curdlan, indicating potential intermolecular hydrogen bonding interactions. In addition, the cross peaks in ¹H‐¹H 2D‐NOESY suggest intermolecular associations between the OH‐2/OH‐4 hydroxyl groups of curdlan and the carboxylic‐/amide‐groups of PGA via hydrogen bonding. Intracellular uptake of C‐NP occurs over time in human monocyte‐derived macrophage (MDM). Furthermore, C‐NP nanoparticles dose‐dependently increase gene expression for TNF‐α, IL‐6, and IL‐8 at 24 h in MDM. C‐NP nanoparticles also stimulate the release of IL‐lβ, MCP‐1, TNF‐α, IL‐8, IL‐12p70, IL‐17, IL‐18, and IL‐23 from MDM. Overall, this is the first demonstration of a simplistic nanoformulation formed by hydrogen bonding between curdlan and PGA that modulates cytokine gene expression and release of cytokines from MDM.     

Voltammetric Determination of Xanthine with a Single‐Walled Carbon Nanotube‐Ionic Liquid Paste Modified Glassy Carbon Electrode

Single‐walled carbon nanotube (SWNT) and room temperature ionic liquid (i.e., 1‐butyl‐3‐methylimidazolium hexaflourophosphate, BMIMPF₆) were used to fabricate paste modified glassy electrode (GCE). It was found that the electrode showed sensitive voltammetric response to xanthine (Xt). The detection limit was 2.0×10^?9 M and the linear range was 5.0×10^?9 to 5.0×10^?6 M. The electrode also displayed good selectivity and repeatability. In the presence of uric acid (UA) and hypoxanthine (Hx) the response of Xt kept almost unchanged. Thus this electrode could find application in the determination of Xt in some real samples. The analytical performance of the BMIMPF₆‐SWNT/GCE was demonstrated for the determination of Xt in human serum and urine samples.     

Differential Pulse Anodic Stripping Voltammetric Determination of Bismuth(III) with 1‐(2‐Pyridylazo)‐2‐naphthol and Ionic Liquid Modified Carbon Paste Electrode

In this paper 1‐(2‐pyridylazo)‐2‐naphthol (PAN) and ionic liquid 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIMBF₄) were mixed with graphite powder to get a modified carbon paste electrode (PAN‐IL‐CPE), which was further used for the sensitive determination of bismuth(III). By the co‐contribution of the formation of PAN‐Bi complex and the accumulation effect of IL, more bismuth(III) was electrodeposited on the surface of the PAN‐IL‐CPE. Then the reduced Bi was oxidized and detected by differential pulse anodic stripping voltammetry (DPASV) with the oxidation peak appeared at 0.17 V (vs. SCE). Under the optimal conditions the oxidation peak current was proportional to the bismuth(III) concentration in the range from 0.04 to 7.5 μmol L^?1 with the detection limit as 3.9 nmol L^?1. The proposed method was successfully applied to the stomach medicine sample detection with good recovery.     

In‐vitro Aluminum Determination and Preconcentration in Blood of Dialysis Patients Based on Ionic Liquid Dispersive Liquid‐Liquid Biomicroextraction by 2‐Amino‐3‐(1H‐imidazol‐4‐yl)propanoic Acid

In this study, trace amounts of aluminum in serum of dialysis patients were chelated with 2‐Amino‐3‐(1H‐imidazol‐4‐yl)propanoic acid (Histidine) and determined by electro‐thermal atomic absorption spectrometry (ETAAS). A fast and efficient method based on ionic liquid dispersive liquid‐liquid bio‐micro‐extraction (IL‐DLLBME) was developed for the determination of Al cation in human blood serum samples. In this work, a small amount of 1‐Hexyl‐3‐methylimmidazolum hexafluorophosphate ([HMIM] [PF₆]) as an extractant solvent was dissolved in acetone as a dispersant solvent and then the binary solution was rapidly injected by a syringe into the serum containing Al³⁺,Which have already in‐vitro chelated by Histidine amino acid (Al‐His) at pH = 6.5. After separation, the settled IL‐phase was dissolved in ethanol up to 200 μL and 20 μL of samples injected into the ET‐AAS by auto‐sampler. Various parameters have been studied and optimized for 10 mL of sample. Under the optimum conditions, the enrichment factor (EF), limit of detection (LOD) and working range (peak area mode) were obtained 53, 15 ng L^?1 and 0.05‐4.1 μg L^?1 respectively. In vitro Al chelation showed that His can significantly decrease aluminum concentration in serum of dialysis patients. Validation of methodology was confirmed by standard reference material (SRM).     

Superionic Conduction over a Wide Temperature Range in a Metal–Organic Framework Impregnated with Ionic Liquids

Most molecules in confined spaces show markedly different behaviors from those in the bulk. Large pores are composed of two regions: an interface region in which liquids interact with the pore surface, and a core region in which liquids behave as bulk. The realization of a highly mobile ionic liquid (IL) in a mesoporous metal–organic framework (MOF) is now reported. The hybrid shows a high room‐temperature conductivity (4.4×10^?3 S cm^?1) and low activation energy (0.20 eV); both not only are among the best values reported for IL‐incorporated MOFs but also are classified as a superionic conductor. The conductivity reaches over 10^?2 S cm^?1 above 343 K and follows the Vogel–Fulcher–Tammann equation up to ca. 400 K. In particular, the hybrid is advantageous at low temperatures (<263 K), where the ionic conduction is superior to that of bulk IL, making it useful as solid‐state electrolytes for electrochemical devices operating over a wide temperature range.     

Impedance Analysis of Inherently Redox‐Active Ionic‐Liquid‐Based Photoelectrochemical Cells: Charge‐Transfer Mechanism in the Presence of an Additional Redox Couple

An intensive electrochemical impedance study was carried out to understand the charge‐transfer processes in photoelectrochemical (PEC) cells based on ionic liquid (IL) electrolytes. Three different electrolytes were utilized to understand the role of redox species as well as the medium on the charge‐transfer mechanism. The negligible diffusion resistance, despite the presence of two different redox species in the case of Fe(CN)₆^?4/?3 in IL, was explained on the basis of charge transfer between species of two different redox couples. Accordingly, the redox species are not required to travel through the bulk of the electrolyte for the removal of accumulated charges, as short‐range charge transfer between the IL and the Fe(CN)₆^?4/?3 species facilitates the removal of accumulated charges. It is also shown that PEC cells utilizing dual redox couples are highly stable with larger photoelectrochmeical windows, >3 V.     

MWCNTs/Ionic Liquid/Graphene Quantum Dots Nanocomposite Coated with Nickel‐Cobalt Bimetallic Catalyst as a Highly Selective Non‐enzymatic Sensor for Determination of Glucose

In this work, a glassy carbon electrode (GCE) was modified with multiwall carbon nanotubes/ionic liquid/graphene quantum dots (MWCNTs/IL/GQDs) nanocomposite. Then, the nanocomposite was decorated with nickel‐cobalt nanoparticles (Ni?Co NPs), and it was used as a non‐enzymatic glucose sensor. Field emission scanning electron microscopy, X‐ray diffraction spectroscopy, and energy dispersive spectroscopy were employed to prove the electrodeposition of the Ni?Co NPs on the surface of MWCNTs/IL/GQDs/GCE. Also, cyclic voltammetric and amperometric methods were utilized for the investigation of the electrochemical behaviour of the Ni?Co NPs/MWCNTs/IL/GQDs/GCE for glucose oxidation. The novel amperometric sensor displayed two linear ranges from 1.0 to 190.0 μmol L^?1 and 190.0 to 4910 μmol L^?1 with a low detection limit of 0.3 μmol L^?1 as well as fast response time (2 s) and high stability. Also, the sensor showed good selectivity for glucose determination in the presence of ascorbic acid, citric acid, dopamine, uric acid, fructose, and sucrose, as potential interference species. Finally, the performance of the proposed sensor was investigated for the glucose determination in real samples. Ni?Co NPs/MWCNTs/IL/GQDs/GCE showed good sensitivity and excellent selectivity.     

Dendritic Ionic Liquids Based on Imidazolium‐Modified Poly(aryl ether) Dendrimers

A series of dendritic ionic liquids (DILs) based on imidazolium‐modified poly(aryl ether) dendrimers IL‐Br‐Gn (n=0–3) were synthesized by a modified convergent approach and “click” chemistry. The resulting DILs exhibited high thermal resistance with decomposition temperatures up to 270 °C and low glass transition temperatures in the range of approximately ?5–0 °C. All IL‐Br‐Gn were found to be miscible with water at any ratio and could encapsulate hydrophobic molecules. The reversible phase transfer of the DILs between the aqueous and organic phases was accomplished by simple anion exchange between the hydrophilic Br^? anion and the hydrophobic bis(trifluoromethylsulfonyl)amide anion (NTf₂^?). IL‐Br‐Gn could be used as transporters to shuttle hydrophobic molecules between the organic and aqueous phases efficiently. The present work provides a new kind of transporting materials with potential applications in substance separation, drug delivery, and biomolecule transport.     

Nickel Hydroxide and Intercalated Graphene with Ionic Liquid Nanocomposite‐modified Electrode for Sensing of Glucose

A novel non‐enzymatic glucose sensor based on nickel hydroxide and intercalated graphene with ionic liquid (G‐IL) nanocomposite modified glass carbon electrode was fabricated. Scanning electron microscope, Fourier transform infrared spectra and energy dispersive X‐ray spectroscopy of the nanocomposite confirmed the morphology and ingredient of Ni(OH)₂ as well as G‐IL. Moreover, experimental results of cyclic voltammetry, electrochemical impedance spectroscopy and chronoamperometry indicated the sensing properties of Ni(OH)₂ at Ni(OH)₂/G‐IL modified electrode towards the typical electrocatalytic oxidation process of glucose at 0.43 V in 0.10 M NaOH. The current response was linearly related to glucose concentration in a range from 0.5 to 500 μM with a detection limit of 0.2 μM (S/N = 3) and sensitivity of 647.8 μA mM^?1 cm^?2. The response time of the sensor to glucose was less than 2 s. This work may be expected to develop an excellent electrochemical sensing platform of G‐IL as a catalysis carrier.