Oblique stagnation-point flow and heat transfer towards a shrinking sheet with thermal radiation

An analysis is made of steady two-dimensional oblique stagnation-point flow and radiative heat transfer of an incompressible viscous fluid towards a shrinking sheet which is shrunk in its own plane with a velocity proportional to the distance from a fixed point. Here the axis of the stagnation flow and that of the shrinking sheet are not aligned. A similarity transformation reduces the Navier-Stokes equations to a set of non-linear ordinary differential equations and are solved numerically using a shooting technique. The analysis of the results obtained shows that multiple solutions exist for a certain range of the ratio of the shrinking velocity to the free stream velocity. The effect of non-alignment for the wall shear stress and the horizontal velocity components are discussed. Streamline patterns are also shown for shrinking at the sheet with aligned and non-aligned cases. It is found that the temperature at a point in the fluid decreases with increase in effective Prandtl number (Pr _eff ). The results pertaining to the present study indicate that as Pr _eff increases, the rate of heat transfer also increases. The reported results are in good agreement with the available published work in the literature.     

Slip effects on unsteady stagnation-point flow and heat transfer over a shrinking sheet

This paper investigates the unsteady boundary layer stagnation-point flow and heat transfer over a linearly shrinking sheet in the presence of velocity and thermal slips. Similarity solutions for the transformed governing equations are obtained and the reduced equations are then solved numerically using fourth order Runge-Kutta method with shooting technique. The numerical results show that multiple solutions exist for certain range of the ratio of shrinking velocity to the free stream velocity (i.e., α) which again depend on the unsteadiness parameter β and the velocity slip parameter (i.e., δ). An enhancement of the velocity slip parameter δ causes more increment in the existence range of similarity solution. Fluid velocity at a point increases increases with the increase in the value of the velocity slip parameter δ, resulting in a decrease in the temperature field. The effects of the velocity and thermal slip parameters, unsteadiness parameter (β) and the velocity ratio parameter (α) on the velocity and temperature distributions are computed, analyzed and discussed. The reported results are in good agreement with the available published results in the literature.     

Effects of thermal radiation on MHD viscous fluid flow and heat transfer over nonlinear shrinking porous sheet

This paper investigates the effects of thermal radiation on the magnetohy-drodynamic (MHD) flow and heat transfer over a nonlinear shrinking porous sheet. The surface velocity of the shrinking sheet and the transverse magnetic field are assumed to vary as a power function of the distance from the origin. The temperature dependent viscosity and the thermal conductivity are also assumed to vary as an inverse function and a linear function of the temperature, respectively. A generalized similarity transformarion is used to reduce the governing partial differential equations to their nonlinear coupled ordinary differential equations, and is solved numerically by using a finite difference scheme. The numerical results concern with the velocity and temperature profiles as well as the local skin-friction coefficient and the rate of the heat transfer at the porous sheet for different values of several physical parameters of interest.     

Stability analysis of the dual solutions for stagnation-point flow over a non-linearly stretching surface

We formulate a general steady two-dimensional stagnation-point flow problem corresponding to the fluid flow over a non-linearly stretching sheet. We then study the existence, uniqueness and stability of the unsteady solutions about each steady solution. It is found that there exist two solution branches: one branch is always stable while the other is always unstable. Also, it is observed that with an increase in the nonlinearity of the stretching sheet, the stable solution becomes more stable while the unstable solution becomes more unstable. Further, we show that the stable solution is the physically meaningful solution and such a physical solution always exists. Moreover, the physically meaningful solution is shown to be monotone and unique.     

Dual solutions in MHD stagnation-point flow of Prandtl fluid impinging on shrinking sheet

The present article investigates the dual nature of the solution of the magneto- hydrodynamic （MHD） stagnation-point flow of a Prandtl fluid model towards a shrinking surface. The self-similar nonlinear ordinary differential equations are solved numerically by the shooting： method. It is found that the dual solutions of the flow exist for cer- tain values of tile velocity ratio parameter. The special case of the first branch solutions （the classical Newtonian fluid model） is compared with the present numerical results of stretching flow. The results are found to be in good agreement. It is also shown that the boundary layer thickness for the second solution is thicker than that for the first solution.     

Unsteady flow and heat transfer past an axisymmetric permeable shrinking sheet with radiation effect

In this paper, the problem of unsteady axisymmetric boundary layer flow and heat transfer induced by a permeable shrinking sheet in the presence of radiation effect is studied. The transformed boundary layer equations are solved numerically by an implicit finite‐difference scheme known as the Keller‐box method. The influence of radiation, unsteadiness and mass suction parameters on the reduced skin friction coefficient f′′(0) and the heat transfer coefficient ?θ′(0), as well as the velocity and temperature profiles are presented and discussed in detail. It is found that dual solutions exist and suction parameter delays the separation of boundary layer. Copyright © 2010 John Wiley & Sons, Ltd.     

Analytical solution to stagnation-point flow and heat transfer over a stretching sheet based on homotopy analysis

This paper is concerned with two-dimensional stagnation-point steady flow of an incompressible viscous fluid towards a stretching sheet whose velocity is proportional to the distance from the slit. The governing system of partial differential equations is first transformed into a system of dimensionless ordinary differential equations. Analytical solutions of the velocity distribution and dimensionless temperature profiles are obtained for different ratios of free stream velocity and stretching velocity, Prandtl number, Eckert number and dimensionality index in series forms using homotopy analysis method（HAM）. It is shown that a boundary layer is formed when the free stream velocity exceeds the stretching velocity, and an inverted boundary layer is formed when the free stream velocity is less than the stretching velocity. Graphs are presented to show the effects of different parameters.     

DTM-BF method and dual solutions for unsteady MHD flow over permeable shrinking sheet with velocity slip

An unsteady magnetohydrodynamic (MHD) boundary layer flow over a shrinking permeable sheet embedded in a moving viscous electrically conducting fluid is investigated both analytically and numerically. The velocity slip at the solid surface is taken into account in the boundary conditions. A novel analytical method named DTMBF is proposed and used to get the approximate analytical solutions to the nonlinear governing equation along with the boundary conditions at infinity. All analytical results are compared with those obtained by a numerical method. The comparison shows good agreement, which validates the accuracy of the DTM-BF method. Moreover, the existence ranges of the dual solutions and the unique solution for various parameters are obtained. The effects of the velocity slip parameter, the unsteadiness parameter, the magnetic parameter, the suction/injection parameter, and the velocity ratio parameter on the skin friction, the unique velocity, and the dual velocity profiles are explored, respectively.     

MHD stagnation-point flow and heat transfer towards stretching sheet with induced magnetic field

The problem of the steady magnetohydrodynamic (MHD) stagnation-point flow of an incompressible viscous fluid over a stretching sheet is studied. The effect of an induced magnetic field is taken into account. The nonlinear partial differential equations are transformed into ordinary differential equations via the similarity transformation. The transformed boundary layer equations are solved numerically using the shooting method. Numerical results are obtained for various magnetic parameters and Prandtl numbers. The effects of the induced magnetic field on the skin friction coefficient, the local Nusselt number, the velocity, and the temperature profiles are presented graphically and discussed in detail.     

Magnetohydrodynamic flow past a shrinking vertical sheet in a dusty hybrid nanofluid with thermal radiation

The magnetohydrodynamic(MHD) mixed convection flow past a shrinking vertical sheet with thermal radiation is considered. Besides, the effects of Cu-Al₂O₃ nanoparticles and dust particles are considered. The similarity variables reduce the governing equations to the similarity equations, which are then solved numerically. The outcome shows that, for the shrinking case, the solutions are not unique. The rate of heat transfer and the friction factor enlarge with increasing the...     

Heat transfer in stagnation-point flow towards a stretching sheet

 Steady two-dimensional stagnation-point flow of an incompressible viscous fluid over a flat deformable sheet is investigated when the sheet is stretched in its own plane with a velocity proportional to the distance from the stagnation-point. It is shown that for a fluid of small kinematic viscosity, a boundary layer is formed when the stretching velocity is less than the free stream velocity and an inverted boundary layer is formed when the stretching velocity exceeds the free stream velocity. Temperature distribution in the boundary layer is found when the surface is held at constant temperature and surface heat flux is determined. Received on 12 July 2000 / Published online: 29 November 2001     

Micropolar fluid flow over a shrinking sheet

An analysis is carried out for the steady two-dimensional flow of a micropolar fluid over a shrinking sheet in its own plane. The shrinking velocity is assumed to vary linearly with the distance from a fixed point on the sheet. The features of the flow and heat transfer characteristics are analyzed and discussed. It is found that the solution exists only if adequate suction through the permeable sheet is introduced. Moreover, stronger suction is necessary for the solution to exist for a micropolar fluid compared to a classical Newtonian fluid. Dual solutions are obtained for certain suction and material parameters.     

Magnetohydrodynamic and heat transfer effects on the stagnation-point flow of an electrically conducting nanofluid past a porous vertical shrinking/stretching sheet in the presence of variable stream conditions

A steady two-dimensional magnetohydrodynamic stagnation-point flow of an electrically conducting fluid and heat transfer with thermal radiation of a nanofluid past a shrinking and stretching sheet is investigated numerically. The model used for the nanofluid incorporates the effects of the Brownian motion and thermophoresis. A similarity transformation is used to convert the governing nonlinear boundary-layer equations into coupled higher-order nonlinear ordinary differential equations. The result shows that the velocity, temperature, and concentration profiles are significantly influenced by the Brownian motion, heat radiation, and thermophoresis particle deposition.     

Oblique stagnation-point flow of a viscoelastic fluid with heat transfer

The two-dimensional forced convection stagnation-point flow and heat transfer of a viscoelastic second grade fluid obliquely impinging on an infinite plane wall is considered as an exact solution of the full partial differential equations. This oblique flow consists of an orthogonal stagnation-point flow to which a shear flow whose vorticity is fixed at infinity is added. The relative importance of these flows is measured by a parameter γ. The viscoelastic problem is reduced to two ordinary differential equations governed by the Weissenberg number W_e, two parameters α and β, the later being a free parameter β, introduced by Tooke and Blyth [A note on oblique stagnation-point flow, Physics of Fluids 20 (2008) 033101-1–3], and the Prandtl number Pr. The two cases when α=β and α≠β are, respectively, considered. Physically the free parameter may be viewed as altering the structure of the shear flow component by varying the magnitude of the pressure gradient. It is found that the location of the separation point x_s of the boundary layer moves continuously from the left to the right of the origin of the axes (x_s<0).     

Series solutions for the stagnation flow of a second-grade fluid over a shrinking sheet

This study derives the analytic solutions of boundary layer flows bounded by a shrinking sheet. With the similarity transformations, the partial differential equations are reduced into the ordinary differential equations which are then solved by the homotopy analysis method （HAM）. Two-dimensional and axisymmetric shrinking flow cases are discussed.     

Accurate solutions for viscoelastic boundary layer flow and heat transfer over stretching sheet

In this article, we present accurate analytical solutions for boundary layer flow and heat transfer of an incompressible and electrically conducting viscoelastic fluid over a linearly stretching surface subject to a transverse uniform magnetic field using the homotopy analysis method （HAM） for two general types of non-isothermal boundary conditions. In addition, we demonstrate that the previously reported analytical solutions for the temperature field given in terms of Kummer＇s function do not converge at the boundary. We provide a graphical and numerical demonstration of the convergence of the HAM solutions and tabulate the effects of various parameters on the skin friction coefficient and wall heat transfer.     

Effect of melting on an MHD micropolar fluid flow toward a shrinking sheet with thermal radiation

The effect of melting on a steady boundary layer stagnation-point flow and heat transfer of an electrically conducting micropolar fluid toward a horizontal shrinking sheet in the presence of a uniform transverse magnetic field and thermal radiation is studied. A similarity transformation technique is adopted to obtain self-similar ordinary differential equations, which are solved numerically. The present results are found to be in good agreement with previously published data. Numerical results for the dimensionless velocity and temperature profiles, as well as for the skin friction and the rate of heat transfer are obtained.