STM investigation of the photoisomerization of an azobis-(benzo-15-crown-5) molecule and its self-assembly on Au(111)

Scanning tunneling microscopy (STM) has been employed to investigate the photoisomerization of azobis-(benzo-15-crown-5) on Au(111). A self-assembled monolayer of azobis-(benzo-15-crown-5) with a (3 x 7) symmetry was observed on Au(111). After ex-situ UV-light irradiation, a new adlayer structure with a different molecular arrangement could be seen on Au(111), although the domain size of the ordered packing is small. On the basis of a high-resolution STM image and photochemical reaction result, schematic models have been proposed for the original and ex-situ irradiated adlayers. After in-situ UV-light irradiation, the ordered arrays disappeared and many bright clusters emerged at domain boundaries. The results presented here provide direct evidence at the molecular level for a photochemical reaction.     

Epitaxial supramolecular assembly of fullerenes formed by using a coronene template on a Au(111) surface in solution

Characteristic properties of the coronene layer formed on Au(111) for the epitaxial growth of various fullerenes are described. The electrochemical behavior of the coronene adlayer prepared by immersing a Au(111) substrate into a benzene solution containing coronene was investigated in 0.1 M HClO4. The as-prepared coronene adlayer on Au(111) revealed a well-defined (4 x 4) structure. Structural changes of the array of coronene molecules induced by potential manipulation were clearly observed by in situ scanning tunneling microscopy (STM). Supramolecularly assembled layers of fullerenes such as C60, C70, C60-C60 dumbbell dimer (C120), C60-C70 cross-dimer (C130), and C60 triangle trimer (C180) were formed on the well-defined coronene adlayer on the Au(111) surface by immersing the coronene-adsorbed Au(111) substrate into benzene solutions containing those molecules. The adlayers thus prepared were characterized by comparison with those which were directly attached to the Au(111) surface. The C60 molecules formed a honeycomb array with an internal structure in each C60 cage on the coronene adlayer, whereas C70 molecules were one-dimensionally arranged with the same orientations. The dimers, C120 and C130 molecules, formed an identical structure with c(11 x 4 radical3)rect symmetry. For the C130 cross-dimer molecule, C60 and C70 cages were clearly recognized at the molecular level. It was difficult to identify the adlayer of the C180 molecule directly attached to Au(111); however, individual C180 molecules could be recognized on the coronene-modified Au(111) surface. Thus, the adlayer structures of those fullerenes were strongly influenced by the underlying coronene adlayer, suggesting that the insertion of a coronene adlayer plays an important role in the formation of supramolecular assemblies of fullerenes.     

Electrochemical control of the structure of two-dimensional supramolecular organization consisting of phthalocyanine and porphyrin on a gold single-crystal surface

Two-component adlayers consisting of cobalt(II) phthalocyanine (CoPc) and a metalloporphyrin such as 5,10,15,20-tetraphenyl-21H,23H-porphine copper(II) (CuTPP), 2,3,7,8,12,13,17,18-octaethyl-21H,23H-porphine copper(II) (CuOEP), or 5,10,15,20-tetraphenyl-21H,23H-porphine cobalt(II) (CoTPP) were prepared by immersing either an Au(111) or Au(100) substrate in a benzene solution containing those molecules. The mixed adlayers thus prepared were investigated in 0.1 M HClO4 by cyclic voltammetry (CV) and in situ scanning tunneling microscopy (STM). The composition of the mixed adlayer consisting of CoPc and CuTPP molecules was found to vary with immersion time. CoPc molecules displaced CuTPP molecules during the modification process with increasing immersion time, and the CuTPP molecules were completely displaced by CoPc molecules in the mixed solution after a prolonged modification time, during which the underlying Au(100) substrate underwent phase transition from the reconstructed (hex) lattice to the unreconstructed (1 x 1) lattice. The two-component adlayer of CoPc and CuTPP was found to form a supramolecular adlayer with the constituent molecules arranged alternately on Au(100)-(hex). The striped structure was stable on Au(100)-(hex) at or near the open circuit potential (OCP), whereas the mixed adlayer was disordered on Au(100)-(1 x 1) at potentials more positive than OCP, where the phase transition of the arrangement of underlying Au atoms (i.e., the lifting of reconstruction) was induced electrochemically. A similar two-component supramolecular adlayer consisting of CoPc and CuTPP was formed on Au(111). A highly ordered, compositionally disordered adlayer of CoTPP and CuTPP was formed on Au(100)-(hex), suggesting that the adlayer structure is independent of the coordinated central metal ion for the formation of supramolecular nanostructures composed of those molecules. A supramolecular organization of CoPc and CuOEP was also found on Au(111). The surface mobility and the molecular reorganization of CoPc and CuOEP on Au(111) were tuned by modulation of the electrode potential. It is concluded that molecular assemblies of the two-component structure consisting of phthalocyanine and porphyrin were controlled not only by the crystallographic orientation of Au but also by the modulation of electrochemical potential.     

Highly ordered C60 monolayer self-assembled by using an iodine template on an Au(111) surface in solution

An iodine-modified Au(111) surface, (I/Au(111)), was used as a substrate to prepare a C 60 adlayer by self-organization in a benzene solution. A highly ordered C 60 adlayer was successfully prepared due to the moderate C 60-I/Au(111) interaction. Two lattice structures, (2 square root 3 x 2 square root 3) R30 degrees and p(2 x 2), were imaged for this C 60 adlayer. For the first structure, a featureless ball-like molecular shape was imaged, ascribed to the molecular rotation resulting from a symmetrical location between C 60 and iodine atoms. For the p(2 x 2) structure, the asymmetrical location of C 60 with respect to the iodine atoms freezes the C 60 molecules on the substrate, leading to a clear image of intramolecular structure. The intermediate iodine atoms in the C 60/I/Au(111) adlayer can be desorbed by electrochemically reduction without significantly affecting the ordering of the C 60 adlayer. However, the internal pattern of C 60 disappears in the absence of iodine.     

Direct STM investigation of cinchona alkaloid adsorption on Cu(III)

Scanning tunneling microscopy (STM) combined with cyclic voltammetry has been employed to investigate the adsorption of cinchonine on Cu(111). Similar to cinchonidine, cinchonine forms a long-range ordered adlayer with (4 x 4) symmetry on the substrate. The structural details on molecular adsorption were obtained by high-resolution STM images. On the basis of the previous results and obtained STM images, the quinoline ring is proposed to lie parallel to Cu(111) and serve as an anchoring group. The chiral quinuclidine moiety extends out of the surface to facilitate the interaction with the prochiral reactants.     

In-situ scanning tunneling microscopy of carbon monoxide adsorbed on Au(111) electrode

In-situ scanning tunneling microscopy (STM) coupled with cyclic voltammetry was used to examine the adsorption of carbon monoxide (CO) molecules on an ordered Au(111) electrode in 0.1 M HClO4. Molecular resolution STM revealed the formation of several commensurate CO adlattices, but the (9 x radical 3) structure eventually prevailed with time. The CO adlayer was completely electrooxidized to CO2 at 0.9 V versus RHE in CO-free 0.1 M HClO(4), as indicated by a broad and irreversible anodic peak which appeared at this potential in a positive potential sweep from 0.05 to 1.6 V. A maximal coverage of 0.3 was estimated for CO admolecules from the amount of charge involved in this feature. Real-time in-situ STM imaging allowed direct visualization of the adsorption process of CO on Au(111) at 0.1 V, showing the lifting of (radical 3 x 22) reconstruction of Au(111) and the formation of ordered CO adlattices. The (9 x radical 3) structure observed in CO-saturated perchloric acid has a coverage of 0.28, which is approximately equal to that determined from coulometry. Switching the potential from 0.1 to -0.1 V restored the reconstructed Au(111) with no change in the (9 x radical 3)-CO adlattice. However, the reconstructed Au(111) featured a pairwise corrugation pattern with two nearest pairs separated by 74 +/- 1 A, corresponding to a 14% increase from the ideal value of 65.6 A known for the ( radical 3 x 22) reconstruction. Molecular resolution STM further revealed that protrusions resulting from CO admolecules in the (9 x radical 3) structure exhibited distinctly different corrugation heights, suggesting that the CO molecules resided at different sites on Au(111). This ordered structure predominated in the potential range between 0.1 and 0.7 V; however, it was converted into new structures of (7 x radical 7) and ( radical 43 x 2 radical 13) on the unreconstructed Au(111) when the potential was held at 0.8 V for ca. 60 min. The coverage of CO adlayer decreased accordingly from 0.28 to 0.13 before it was completely removed from the Au(111) surface at more positive potentials.     

The blocking and structural properties of a Schiff base self-assembled monolayer on the surface of Au(111)

Electrochemistry and in situ electrochemical scanning tunneling microscopy (STM) were used to study the blocking and structural properties of Shiff base V-ape-V self-assembled monolayers (SAMs) on the surface of Au(111) in perchloric acid solution. The complex-plane impedance plots for the SAM covered Au(111) electrodes, with the redox couple of Fe(CN)₆^4–/3– present in solution, exhibit arc shapes, revealing that the electrochemical kinetics were controlled by the electron-transfer step. For bare Au(111), the electrode process was mass transport limited. The molecules adsorb on Au(111) with a flat-lying orientation and form a long-range well-defined adlayer. A new structure of was observed in the double-layer potential region. A structural model is proposed to interpret the molecular registry with Au(111) substrate.     

Molecular adsorption at well-defined electrode surfaces: hydroquinone on Pd(111) studied by EC-STM

The interaction of hydroquinone (H2Q) with well-defined Pd(111) surfaces at preselected potentials in dilute H2SO4 has been studied by molecule-resolved electrochemical scanning tunneling microscopy (EC-STM). H2Q spontaneously undergoes oxidative chemisorption to benzoquinone (Q), which adopts a slightly tilted parallel orientation. Evidently, the surface coordination is through the quinone pi-electron system. At potentials within the double-layer region, a close-packed well-ordered Pd(111)-(3 x 3)-Q adlattice was formed. A potential excursion to 0.7 V, a potential at which the solution-phase Q/H2Q redox reaction takes place, introduced disorder into the organic adlayer; this positive-potential-induced order-to-disorder phase transition is reversible because the ordered (3 x 3)-Q adlattice was regenerated when the potential reverted to 0.4 V. When the potential was poised at 0.2 V, a potential at which hydrogen evolution was initiated, an appreciable fraction of Q was (hydrogenatively) desorbed; the remnant Q molecules were agglomerated in small islands that retained the (3 x 3) symmetry of the full adlayer. Two possible structural models of the Pd(111)-(3 x 3)-Q adlattice are described.     

In situ STM investigation of spinodal decomposition and surface alloying during underpotential deposition of Cd on Au(111) from an ionic liquid

The electrodeposition and anodic dissolution of Cd on Au(111) in an acidic chloroaluminate ionic liquid (MBIC-AlCl(3), 42 : 58 mol%) have been investigated by cyclic voltammetry and in situ STM. In the Cd underpotential deposition region, various nanostructures can be distinguished. At a potential of 0.95 V vs. Al/Al(iii), a transformation from a well ordered AlCl(4)(-) adlayer to a ( radical3 x radical19) superstructure, presumably due to Cd-AlCl(4)(-) coadsorption, is observed. Reducing the potential to 0.45 V, surface alloying of Cd and Au occurs, which is evidenced for the first time by typical spinodal structures occurring both during deposition and dissolution of the surface alloy layer having a hexagonal structure. At still lower potentials below 0.21 V, a layer-by-layer growth of bulk Cd sets in.     

Scanning tunneling microscopy and spectroscopy studies of 4-methyl- 4'-(n-mercaptoalkyl)biphenyls on Au(111)-(1x1).

4-methyl-4'-(n-mercaptoalkyl)biphenyl (CH3-C6H4-C6H4-(CH2)n-SH, n=3-6, BPn) monolayers assembled on Au(111)-(1x1) in 1,3,5,-trimethylbenzene (TMB) at various temperatures are studied by scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS). High resolution STM images reveal that BP3 and BP5 form a (sqrt 3x2sqrt 3) repeating motif superimposed on a temperature-dependent Moire pattern. BP4 and BP6 adlayers are characterized by a coexisting (2sqrt 3x5sqrt 3) majority phase and a temperature-dependent (3xpsqrt 3) minority phase. Assembly at 60 degrees C or 90 degrees C leads to p=5. Compression of the adlayer was found at higher temperatures. Combined with high-resolution structure experiments, the electronic characteristics of BP3 and BP4 self-assembled monolayers (SAMs) were studied by monitoring current-distance (iT-Deltaz) and current-voltage (iT-Ebias) characteristics in TMB employing a gold STM tip|BPn|Au(111)-(1x1) configuration. The semilogarithmic (iT-Deltaz) plots yielded three linear regions in the range 10 pA相似文献   

Effect of adlayer structure on the host-guest recognition between calcium and crown-ether-substituted phthalocyanine arrays on Au single-crystal surfaces.

Adlayers of 15-crown-5-ether-substituted cobalt(II) phthalocyanine (CoCRPc) were prepared by immersion of either Au(111) or Au(100) substrate into benzene-ethanol (9:1 v/v) mixed solutions containing CoCRPc. In situ STM imaging was carried out after transferring the CoCRPc-modified Au crystals into aqueous HClO(4) solution. The packing arrangement of the CoCRPc array on Au(111) was determined to be p(8 x 4 radical 3R - 30 degrees ), and the internal structure was clearly observed by high-resolution STM. Two adlayer structures of CoCRPc, (8 x 9) and (4 radical 5 x 4 radical 5)R26.7 degrees, were found on the Au(100)-(1 x 1) terrace. In the presence of 1 mM Ca(2+), two Ca(2+) ions were trapped in two diagonally located 15-crown-5-ether moieties of each CoCRPc molecule on Au(111), whereas encapsulation of Ca(2+) ions was not seen in the CoCRPc arrays on the Au(100)-(1 x 1) surface. The present study demonstrates that the relationship between crown moieties of CRPc and the underlying Au lattice is important in the trapping of Ca(2+) ions in crown rings.     

Unequal-sphere packing model for simulation of the uniaxially compressed iodine adlayer on Au(111)

A simple unequal-sphere packing (USP) model, based on pure geometrical principles, was applied to study the centered-rectangular iodine c(px radical3)R30 degrees adlayer on the Au(111) surface, well-known from surface X-ray structure (SXS), low energy electron diffraction (LEED), and scanning tunneling microscopy (STM) experiments. To reproduce the exact patterns observed in experiments, two selective conditions-minimum average adsorbate height and minimum adlayer roughness-were imposed. As a result, a series of adlayer patterns with c(px radical3)R30 degrees symmetry (2.3 < p < 3), with precise structural details, including atomic registry and identification of the p-bisector as the most likely trajectory for the iodine adatom movement during the so-called uniaxial compression phenomenon, were identified. In addition, using the same model, the difference between the iodine adlayer arranged in hexagonal and centered-rectangular c(px radical3)R30 degrees patterns, as in the case of Pt(111) and Au(111) surfaces, was investigated. Qualitative and quantitative comparison shows that iodine adatoms in these two arrangements differ significantly in atomic registry, distance from the substrate, and the adlayer corrugation. Our findings could be of special interest in the study of the nature of the iodine adatom bonding to different substrates (i.e., Au vs Pt).     

Surface electrochemistry of CO on reconstructed gold single crystal surfaces studied by infrared reflection absorption spectroscopy and rotating disk electrode

The electrooxidation of CO has been studied on reconstructed gold single-crystal surfaces by a combination of electrochemical (EC) and infrared reflection absorption spectroscopy (IRAS) measurements. Emphasis is placed on relating the vibrational properties of the CO adlayer to the voltammetric and other macroscopic electrochemical responses, including rotating disk electrode measurements of the catalytic activity. The IRAS data show that the C-O stretching frequencies are strongly dependent on the surface orientation and can be observed in the range 1940-1990 cm(-1) for the 3-fold bridging, 2005-2070 cm(-1) for the 2-fold bridging, and 2115-2140 for the terminal position. The most complex CO spectra are found for the Au(110)-(1 x 2) surface, i.e., a band near 1965 cm(-1), with the second, weaker band shifted positively by about 45 cm(-1) and, finally, a weak band near 2115 cm(-1). While the C-O stretching frequencies for a CO adlayer adsorbed on Au(111)-(1 x 23) show nu(CO) bands at 2029-2069 cm(-1) and at 1944-1986 cm(-1), on the Au(100)-"hex" surface a single CO band is observed at 2004-2029 cm(-1). In the "argon-purged" solution, the terminal nu(CO) band on Au(110)-(1 x 2) and the 3-fold bridging band on the Au(111)-(1 x 23) disappear entirely. The IRAS/EC data show that the kinetics of CO oxidation are structure sensitive; i.e., the onset of CO oxidation increases in the order Au(110)-(1 x 2) > or = Au(100)-"hex" > Au(111)-(1 x 23). Possible explanations for the structure sensitivity are discussed.     

Time-dependent organization and wettability of decanethiol self-assembled monolayer on Au(111) investigated with STM

A detailed study on the time-dependent organization of a decanethiol self-assembled monolayer (SAM) at a designed solution concentration onto a Au(111) surface has been performed with scanning tunneling microscopy (STM). The SAMs were prepared by immersing Au(111) into an ethanol solution containing 1 microM decanethiol with different immersion times. STM images revealed the formation process and adlayer structure of the SAMs. It was found that the molecules self-organized into adlayers from random separation to a well-defined structure. From 10 s, small domains with ordered molecular organization appeared, although random molecules could be observed on Au(111) at the very initial stage. At 30 s, the SAM consisted of uniform short stripes. Each stripe consisted of sets of decanethiol mainly containing eight molecules. With the immersion time increasing, the length of the stripes increased. At 5 min, the alkyl chains overlapped each other between the adjacent stripes, indicating the start of a stacked process. After immersing Au(111) in decanethiol solution for 3 days, a densely packed adlayer with a (radical 3 x radical 3)R30 degrees structure was observed. The formation process and structure of decanethiol SAMs are well related to sample preparation conditions. The wettability of the decanethiolate SAM-modified Au(111) surface was also investigated.     

Electrostatically controlled nanostructure of cationic porphyrin diacid on sulfate/bisulfate adlayer at electrochemical interface

Two different cationic tetraphenyl porphyrins, one with two carboxyphenyl groups in cis-position and the other in trans-position (cis- and trans-H(4)DCPP(2+)), have been examined to control the structure of their 2D supramolecular assemblies in 0.05 M H(2)SO(4) at electrochemical interfaces. Electrochemical scanning tunneling microscopy (EC-STM) images revealed the formation of supramolecularly organized nanostructures of cis-H(4)DCPP(2+) such as dimer, trimer, and tetramer on the (square root(3) x square root(7)) sulfate/bisulfate adlayer, suggesting the importance of both electrostatic interaction between cationic porphyrin core and sulfate/bisulfate adlayer and the hydrogen bond formation between carboxyl groups of the nearest neighbor cationic porphyrins. Trans-H(4)DCPP(4+) ions were also found to be aligned in the square root(3) direction of the sulfate/bisulfate adlayer. The structure of these cationic porphyrin adlayers was found to depend upon the electrode potential; i.e., when the potential was changed in the negative direction, the (square root(3) x square root(7)) sulfate/bisulfate adlayer disappeared, and no ordered arrays were formed. In contrast, when 0.1 M HClO(4) was used as an electrolyte solution, only a disordered array was observed. The results of the present study indicate that the (square root(3) x square root(7)) sulfate/bisulfate adlayer formed on Au(111) in 0.05 M H(2)SO(4) plays a significant role as a nanorail template in the control of electrostatically assembled diacid porphyrin dicarboxylic acid derivative. In addition, the high-resolution STM clearly distinguished between cis-H(4)DCPP(2+) ion and cis-H(2)DCPP molecule. The cis-H(2)DCPP molecules on Au(111) provided an adlayer structure and an electrochemical behavior which are different from those of cis-H(4)DCPP(2+) ions.     

Two-dimensional supramolecular organization of copper octaethylporphyrin and cobalt phthalocyanine on Au(111): molecular assembly control at an electrochemical interface

Mixed adlayers of 2,3,7,8,12,13,17,18-octaethyl-21H,23H-porphine copper(II) (CuOEP) and cobalt(II) phthalocyanine (CoPc) were prepared by immersing Au(111) substrate in a benzene solution containing CuOEP and CoPc molecules, and they were investigated in 0.1 M HClO(4) by cyclic voltammetry (CV) and in-situ scanning tunneling microscopy (STM). The composition of the mixed adlayer consisting of CuOEP and CoPc molecules was found to vary depending on the immersion time. CoPc molecules displaced CuOEP molecules during the modification process with increasing immersion time, and the CuOEP molecules were completely replaced with CoPc molecules in the mixed solution after a long modification time. The two-component adlayer consisting of CuOEP and CoPc, which has a structure with the constituent molecules arranged alternately, was found to form either a p(9 x 3(square root)7R - 40.9 degrees) or a p(9 x 3(square root)7R - 19.1 degrees) structure, each involving two molecules on the Au(111) surface. The surface mobility and the molecular reorganization of CuOEP and CoPc were accelerated by modulation of the electrode potential. Different surface structures were produced at different electrode potentials, and hence potential modulation should allow a precisely controllable phase separation to take place in aqueous HClO(4).     

Porphyrin self-assembly at electrochemical interfaces: role of potential modulated surface mobility

The self-assembly of 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphine (TPyP) on Au(111) electrodes was investigated. The adlayer structure was found to depend on the electrode potential. At positive potentials (>0.5V(SCE)), a disordered layer of TPyP is formed on the Au(111) electrode. STM images showed that the disordered molecules are immobile. At negative potentials (-0.2V(SCE)), however, the molecules are highly mobile and can no longer be imaged by STM, though they remain on the surface. At intermediate potentials (-0.2 to +0.2V(SCE)), the TPyP formed a highly ordered adlayer. Once the ordered adlayer is formed, it persists even after the potential is stepped to higher values (0.5-0.8 V(SCE)). These results can be explained by the role of potential modulated adsorbate-substrate interaction and surface mobility. This suggests the intriguing prospect of using electrode potential to tune surface interactions and to drive surface processes, e.g., molecular self-assembly, in electrochemical systems.     

Deciphering structural domains of alkanethiol self-assembled configurations by friction force microscopy

High resolution and high sensitivity friction force microscopy (FFM) is used to distinguish between different crystallographic domains of standing up molecular configurations of self-assembled alkanethiols partially covering Au(111) surfaces. We propose two suitable methods to decipher structural domains of the same configuration depending on the two-dimensional (2D) symmetry of the organic adlayer. For the hexagonal (radical3xradical3)R30 degrees where no differences among equivalent domains are expected in lattice-resolved scanning force imaging, different molecular domains however can be observed in lateral force images because of the friction asymmetry caused by domains presenting different relative orientations between the molecular tilt direction and the tip scanning direction. Since no lateral packing anisotropy is expected in this close-packed configuration, no friction anisotropy however is observed. Conversely, because of its rectangular space group symmetry, lattice resolved stick-slip imaging is enough to solve between the existing domains for the (2xradical3) rectangular configuration.     

Adsorption and coordination of tartaric acid enantiomers on Cu(111) in aqueous solution

Chiral modifiers have gained much attention because they can induce high enantioselectivity on reactive metal surface in heterogeneous enantioselective catalysis. The high enantioselectivity is attributed to that the chirality of modifiers is bestowed onto the metal surface upon adsorption. Much study on the adsorption of modifiers on metal surface has been performed in an ultrahigh vacuum. In this paper, the adsorption of tartaric acid on Cu(111) has been studied by electrochemical scanning tunneling microscopy (STM) in aqueous solution. It is found that (R,R)-tartaric acid and (S,S)-tartaric acid can form a well-ordered adlayer on the Cu(111) surface with a (4 x 4) symmetry. A dimeric structure is proposed in the temporary model from STM observation.     

In situ stress and nanogravimetric measurements during underpotential deposition of bismuth on (111)-textured Au

The surface stress associated with the underpotential deposition (upd) of bismuth on (111)-textured Au is examined, using the wafer curvature method, in acidic perchlorate and nitrate supporting electrolyte. The surface stress is correlated to Bi coverage by independent nanogravimetric measurements using an electrochemical quartz crystal nanobalance. The mass increase measured in the presence of perchlorate is consistent with the (2 x 2) and (p x square root 3)-2Bi adlayers reported in the literature. ClO(4)(-) does not play a significant role in the upd process. The complete Bi monolayer causes an overall surface stress change of about -1.4 N m(-1). We attribute this compressive stress to the formation of Bi-Au bonds which partially satisfy the bonding requirements of the Au surface atoms, thereby reducing the tensile surface stress inherent to the clean Au surface. At higher Bi coverage, an additional contribution to the compressive stress is due to the electrocompression of the (p x square root 3)-2Bi adlayer. In nitric acid electrolyte, NO(3)(-) coadsorbs with Bi over the entire upd region but has little fundamental impact on adlayer structure and stress.