涂料中甲醛的分光光度测定新方法

在FeCl3存在的盐酸介质中,甲醛与蛋白胨反应生成紫色化合物,最大吸收波长555 nm,甲醛浓度在1~25μg/10 mL范围内,吸光度与浓度成线性关系,线性相关系数r2=0.9997,检出限0.05μg/mL。用本法测定经活性炭脱色的水溶性涂料中的甲醛含量,回收率为96.46%~103.32%,相对标准偏差(n=6)为1.36%~2.09%。     

水发食品中痕量甲醛的测定

为建立催化动力学荧光法测定痕量甲醛的新方法,基于在酸性介质中,甲醛催化KBrO3氧化藏红T的褪色反应,使其荧光猝灭的原理,将反应体系在沸水浴中加热8 min,流水冷却3min,采用动力学荧光法测定痕量甲醛。结果表明,甲醛在0.02~0.14μg/mL范围内与△F值呈良好的线性关系,线性方程为△F=-1.642 8+274.12C(μg/mL),r=0.996 9,检出限为0.011μg/mL。该法简便,快速,常见共存物质干扰小,可用于水发食品及其它食品中甲醛含量的测定,加标回收率为84.63%~94.93%。     

比久农药中游离偏二甲肼的高效液相色谱快速测定

建立了用甲醛衍生测定农药比久样品中微量的偏二甲肼的方法。采用甲醛与偏二甲肼柱前衍生,在室温、中性溶液中反应10 min,生成确定量的有较强紫外吸收的偏二甲腙,不须富集可直接用HPLC法测定偏二甲肼。研究了甲醛与偏二甲肼的反应条件及产物的光谱特征,测得衍生物的最大吸收波长λmax=237 nm和表观摩尔吸光系数ε=3.6×103(L.mol-1.cm-1),选定ZorbaxODS色谱柱,V(磷酸盐缓冲溶液,pH 7)∶V(甲醇)=94∶6为流动相,检测波长为237 nm。结果表明:在0.56~960μg/mL范围内回归方程为:A=0.4677ρ-0.2790,R2=0.9998,检出限为1.3μg/g,回收率为97.5%~103.4%,相对标准偏差为0.9%~1.8%。     

顶空固相微萃取-气质联用法检测尿液中的曲马多

建立尿液中曲马多的顶空固相微萃取气相色谱质谱联用(HS-SPME-GC/MS)分析方法。利用响应面法对顶空固相微萃取的条件进行优化,在优化的条件下,采用SKF为内标,在选择离子模式下,选取m/z 58(曲马多)和m/z 86(SKF)为定量离子,利用GC/MS对尿液中的曲马多进行定量分析。工作曲线线性范围超过0.05~1.0μg/mL(r2=0.9962)。检测限为0.011μg/mL(S/N=3),定量限为0.038μg/mL(S/N=10),用0.1μg/mL和0.75μg/mL曲马多标准液计算回收率分别在100.20%~109.65%和98.43%~103.82%之间,RSD为5.32%和9.13%(n=5)。建立的方法适用于尿液中曲马多。     

离子色谱法测定烟用纸张中甲醛和乙二醛

建立了离子色谱检测烟用纸张中甲醛和乙二醛含量的分析方法。样品中的甲醛和乙二醛在碱性条件下与过氧化氢反应生成甲酸根和草酸根,使用离子色谱法测定其含量。考察并优化了样品前处理和色谱分析条件。实验表明,甲酸根和草酸根线性关系良好,线性相关系数分别为0.9998和0.9999,检测限分别为8.0×10-6μg/mL和5.0×10-5μg/mL,甲醛的加标回收率在95.8%~98.4%之间,乙二醛的加标回收率在96.8%~102.5%之间。该方法简便易行,且不使用有机溶剂,可为烟用纸张中甲醛和乙二醛的检测提供一种新的参考。     

流动注射化学发光法测定氨苄西林的研究

氨苄西林在NaOH溶液中降解后,其产物可在酸性条件下与KMnO4发生化学发光反应,甲醛的存在可使发光强度增强。据此,采用流动注射技术,建立了一种测定氨苄西林的化学发光分析法。方法的检出限为9.1×10-9g/mL,相对标准偏差为1.8%(n=11,ρ=3.4×10-6g/mL),线性范围为4.0×10-8~2.0×10-5g/mL。利用该法测定了氨苄西林胶囊中的氨苄西林,其回收率在87%~106%。     

电感耦合等离子体原子发射光谱法(ICP-AES)测定富铼渣中的铼

建立了电感耦合等离子体原子发射光谱法测定富铼渣中铼含量的方法。对样品的酸密闭消解、碱熔解和测定铼的条件进行了研究。结果表明:于盐酸(10%)介质、227.525nm分析线处,铼测定浓度在0.20~50.00μg/mL线性良好;两种样品分解方法测得铼结果吻合,用于富铼渣样品中1.85%~3.66%铼含量的测定,检出限、相对标准偏差(RSD,n=22)和加标回收率分别为酸密闭消解法6.46×10-10μg/mL,0.69%~1.1%和99.95%~100.1%,碱熔解法6.49×10-10μg/mL,0.69%~1.1%和99.96%~100.3%。     

柱前衍生-高效液相色谱法测定蔬菜中甲醛含量

建立了蔬菜中甲醛含量的高效液相色谱分析方法。样品用水提取、2,4-二硝基苯肼衍生及二氯甲烷萃取、浓缩后,采用Waters Sunfire C18色谱柱(250×4.6 mm,5μm)分离,流动相为乙腈-水(1∶1,V/V),在355nm波长处紫外检测。甲醛在0.1~2.0μg/mL浓度范围内呈线性关系,相关系数0.9989,方法检出限为1.0 mg/kg,在2~10mg/kg添加浓度范围内,甲醛平均回收率为78.1%~114.2%,相对标准偏差在0.8%~9.5%之间。     

微波消解-端视ICP-AES测定茶叶中微量重金属元素

采用微波消解-端视等离子体原子发射光谱(ICP-AES)测定茶叶中微量重金属元素Pb、As、Cd、Cu、Fe,并对ICP-AES工作参数及条件进行了优化和选择。Pb、As、Cd、Cu、Fe的检出限分别为2.9×10-3μg/mL、5.2×10-3μg/mL、0.056×10-3μg/mL、0.55×10-3μg/mL、0.59×10-3μg/mL,线性范围为0~10000μg/L,相对标准偏差为1.7%~8.5%;回收率为90%~104%。该方法与国标法比较,结果无显著性差异。本法能用于茶叶测定。     

丁基罗丹明B-过硫酸钾催化动力学光度法测定痕量银

报道了以银催化过硫酸钾氧化丁基罗丹明B褪色的动力学光度法测定痕量银的方法。该法的线性范围为0.8~48μg/L,检出限为3.6×10-10g/mL。对浓度为24μg/LAg(Ⅰ)测定的相对标准偏差为2.1%(n=11),表观活化能为87.55kJ/mol。本法应用于磺胺嘧啶银乳膏中银的测定,相对标准偏差为2.3%~2.7%,回收率为97.4%~98.3%。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.