Kinetic and mechanistic aspects of metallocene polymerisation catalysts

The nature of the counteranion is an essential component of metallocene polymerisation catalysts. Detailed mechanistic investigations show how the anion is able to determine the activity and, in many cases, also the stereoselectivity of the catalyst. This review summarises recent advances in mechanistic understanding of well defined metallocene catalysts based on ion pairs [L₂ZrR⁺ ?X⁻] and describes recent insights in ion mobility and kinetics of alkene polymerisation processes. The interplay of ligand structure and nature of the counteranions demonstrates a fascinating versatility and subtlety that continually challenge our ability to rationalise and predict catalyst performance.     

High-performance liquid chromatographic analysis of free long chain fatty acids produced during lipolysis by anaerobic digestor sludge

The development of sample extraction techniques in conjunction with application of a modified version of an established HPLC technique allowed the rapid estimation of concentrations of long chain fatty acids (LCFA) produced by the lipolytic activity of bacteria in anaerobic digestor sludges or experiments using the sludges as inocula. It was established that free long chain fatty acids will preferentially partition into certain phases in the sludge or experimental cultures. These data, and application of the developed techniques for monitoring of LCFA, may lead to the avoidance of toxicity and failure of full-scale anaerobic digestors treating high lipid content waste in the future.     

Tocopherol side chain synthesis via asymmetric organocatalytic transfer hydrogenation and convenient measurement of stereoselectivity

An asymmetric synthetic route for 1-iodofarnesane, a key intermediate for tocopherol side chain synthesis, starting from (+)-(R)-citronellal was developed. 1-Iodofarnesane was prepared through eight steps in about 50% overall yield, and asymmetric transfer hydrogenation of the enal with a chiral organocatalyst was conducted as a stereoinduction step. To measure the stereoinduction level and optical purity of the product, a convenient analytical method was developed in which a phenylcarbamate derivative of the C₁₅ alcohol was found to be suitable to give proper polarity and UV-activity for chiral UV-HPLC analysis.     

Kinetic and stereoselectivity effects of phosphite ligands in dirhodium catalysis

A phosphite additive that can act as an axial ligand for a dirhodium tetracarboxylate catalyst improves the enantioselectivity of silane insertion of a diazo substrate. A kinetic study enables measurement of the catalytic rate constant for the catalyst bound to an axial ligand. Although a single axial ligand has an inhibitory effect on reactivity at the distal rhodium center, axially-bound catalysts are the predominant active species in solution for phosphite concentrations above 6 mol % under our reaction conditions. We examine changes in product enantioselectivity as a function of ligand to shed light on the structure and kinetics of product formation steps.     

Stable carbon isotope ratios of methyl-branched fatty acids are different to those of straight-chain fatty acids in dairy products

Methyl-branched fatty acids (MBFAs) are the dominant form of fatty acid found in many bacteria. They are also found at low levels in a range of foodstuffs, where their presence has been linked to bacterial sources. In this study we evaluated the potential of compound-specific isotope analysis to obtain insights into the stable carbon isotope ratios (δ¹³C values in ‰) of individual MBFAs and to compare them to the stable carbon isotope ratios of straight-chain fatty acids in food. Due to their low abundance in foodstuffs, the MBFAs were enriched prior to gas chromatography coupled to isotope ratio mass spectrometric (GC–IRMS) analysis. After transesterification, urea complexation was used to suppress the 16:0 and 18:0 methyl esters that were dominant in the samples. Following that, silver-ion high performance liquid chromatography was used to separate the saturated from the unsaturated fatty acids. The resulting solutions of saturated fatty acids obtained from suet, goat’s milk, butter, and human milk were studied by GC–IRMS. The δ¹³C values of fatty acids with 12–17 carbons ranged from −25.4‰ to −37.6‰. In all samples, MBFAs were most depleted in carbon-13, followed by the odd-chain fatty acids 15:0 and 17:0. 14:0 and 16:0 contained the highest proportions of carbon-13. The results from this study illustrate that MBFAs have distinctive δ¹³C values and must originate from other sources and/or from very different substrates. These measurements support the initial hypothesis that δ¹³C values can be used to attribute MBFAs to particular sources.     

狭果茶藨种子脂肪酸的分析

用超临界萃取技术对产于青藏高原上的狭果茶种子中脂肪酸进行萃取,其萃取率为12%。用毛细管气相色谱对萃取的脂肪酸进行了分离和分析。结果表明不饱和脂肪酸的质量分数在90%以上。其中α 亚麻酸(α Linolenicae ia)为27.4%,γ 亚麻酸(γ Linoleicaeia)为4.93%,亚油酸(Linoleicaeia)为32 61%。     

Optimization of gas chromatographic-mass spectrometric analysis for fatty acids in hydrogenated castor oil obtained by catalytic transfer hydrogenation

Optimization of the analytical conditions for determination of the partially hydrogenated products of castor oil obtained by catalytic hydrogen transfer, using Pd/C, with limonene as hydrogen source, was carried out in this work. The study involved the use of three capillary columns: SPB-1, HP-5 and HP-20 M. The best resolution for the oleic acids isomers, C18:1, was obtained with HP-20 M column while, the best resolution, identification and quantification for the products containing OH and CO were obtained with a HP-5 column after the silylation of the methyl esters.     

Gas chromatography - optical fiber detector for assessment of fatty acids in urban soils

Fatty acids have been used as biomarkers of the microbial community composition of soils and they are usually separated and quantified by gas-chromatography coupled to a flame ionization detector (GC-FID). The aim of this study was to develop, validate and apply a methodology based on gas chromatography coupled to optical fiber detection (GC-OF) for screening five fatty acids used as indicators of fungal and bacterial communities in urban soils. The performance of the GC-OF methodology (optical fiber detector at 1550 nm) was evaluated by comparison with the GC-FID methodology and it was found that they were comparable in terms of linear range, detection limit and analytical errors. Besides these similar analytical characteristics, the GC-OF is much cheaper than the GC-FID methodology. Different concentrations were determined for each fatty acid indicator which in turn varied significantly between the soil samples analyzed from Lisbon ornamental gardens. Additionally, the GC-OF showed a great potential as alternative for determination of eleven or more fatty acids in urban soils.     

Multilayered catalysts for fatty acid ester hydrotreatment into fuel range hydrocarbons

This study aims to investigate Ni–Mo/γAl₂O₃ and Ni–La/Zn-ZSM-5–γAl₂O₃ catalysts, which convert methyl esters into various compounds with a similar composition to those found in diesel fuels. The catalysts were synthesized by impregnation using two different routes and characterized by atomic absorption spectrometry, Brunauer–Emmett–Teller, and scanning electron microscopy. The acid strength distribution indicates a relatively high concentration of weak acid centers for both materials. The disposal of the catalysts into the reactor system is an important factor for driving the process toward the desired reaction products. The hydrodeoxygenation becomes important and paraffins are formed as intermediaries when Ni–Mo/γAl₂O₃ is first disposed into the reactor, whereas hydrocracking is poor and the dehydrocyclization does not occur in the case of Ni–La/Zn-ZSM-5–γAl₂O₃ as first layer. Triple-layered catalytic systems enhance the production of n-paraffins with high carbon number, mainly C17 and C18, which are important as diesel component. The effect of temperature was also studied and it was found that aromatics are mainly formed over double-layered catalytic systems by varying the temperature. In the case of triple-layered catalysts, the change in the product composition from saturated hydrocarbons with 12–18 carbon atoms to aromatics was observed by increasing the temperature from 420 to 445 °C. An interesting finding by the addition of n-octane in the feed was observed and the considerable increase in C8 aromatics involved the dehydrocyclization that occurred faster than hydrocracking.     

Analysis of long-chain fatty acids in grey wastewater with in-vial derivatisation

The presence and levels of long-chain fatty acids (C₆–C₂₀) in grey wastewater from bathrooms have been investigated. The acids were purified and concentrated by solid-phase extraction on strong anion exchange discs, in-vial derivatised to their corresponding methyl ester and subsequently analysed by GC-MS. The method was able to quantify the acids at concentration <1?µg/L with a recovery of 31–97%. The levels of fatty acids were found in the range of <0.5 to 27?100?µg/L and the highest levels were found for the saturated lauric (C₁₂), palmitic (C₁₆) and stearic (C₁₈) acids. The treatment efficiency of a local treatment plant was evaluated by comparing concentrations of fatty acids at the inlet and the outlet. It was found that the treatability decreases with increasing chain length for the saturated acids (19–100% degradation) whereas the corresponding mono unsaturated acids were more easily degraded.     

Analysis of volatile fatty acids in biological specimens by capillary gas chromatography

A method was developed to analyze and quantitate volatile fatty acids such as acetic, propionic, butyric, iso-butyric, valeric, and iso-valeric acid from samples of biological origin. A capillary column system including an automatic on-column injection device as well as a precolumn of larger internal diameter than the analytical column was elaborated for this purpose. In order to obtain well resolved and correctly quantifiable chromatographic peaks it turned out to be essential to work under acidic/aqueous conditions. To achieve a better sample transfer into the chromatographic system an organic solvent had to be used together with the aqueous milieu, thus improving wetting properties of the liquid sample plug introduced into the column. Cold on-column injection was applied in order to avoid discrimination of the various acids due to sample splitting and the automatic technique was chosen in view of the large number of samples from biological extractions which had to be analyzed.     

FT-midIR determination of fatty acid profiles, including trans fatty acids, in bakery products after focused microwave-assisted Soxhlet extraction

A study of the feasibility of Fourier transform medium infrared spectroscopy (FT-midIR) for analytical determination of fatty acid profiles, including trans fatty acids, is presented. The training and validation sets—75% (102 samples) and 25% (36 samples) of the samples once the spectral outliers have been removed—to develop FT-midIR general equations, were built with samples from 140 commercial and home-made bakery products. The concentration of the analytes in the samples used for this study is within the typical range found in these kinds of products. Both sets were independent; thus, the validation set was only used for testing the equations. The criterion used for the selection of the validation set was samples with the highest number of neighbours and the most separation between them (H<0.6). Partial least squares regression and cross validation were used for multivariate calibration. The FT-midIR method does not require post-extraction manipulation and gives information about the fatty acid profile in two min. The 14:0, 16:0, 18:0, 18:1 and 18:2 fatty acids can be determined with excellent precision and other fatty acids with good precision according to the Shenk criteria, R ²≥0.90, SEP=1–1.5 SEL and R ²=0.70-0.89, SEP=2–3 SEL, respectively. The results obtained with the proposed method were compared with those provided by the conventional method based on GC-MS. At 95% significance level, the differences between the values obtained for the different fatty acids were within the experimental error. Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.     

Direct injection analysis of fatty and resin acids in papermaking process waters by HPLC/MS

A novel HPLC-atmospheric pressure chemical ionization/MS (HPLC-APCI/MS) method was developed for the rapid analysis of selected fatty and resin acids typically present in papermaking process waters. A mixture of palmitic, stearic, oleic, linolenic, and dehydroabietic acids was separated by a commercial HPLC column (a modified stationary C(18) phase) using gradient elution with methanol/0.15% formic acid (pH 2.5) as a mobile phase. The internal standard (myristic acid) method was used to calculate the correlation coefficients and in the quantitation of the results. In the thorough quality parameters measurement, a mixture of these model acids in aqueous media as well as in six different paper machine process waters was quantitatively determined. The measured quality parameters, such as selectivity, linearity, precision, and accuracy, clearly indicated that, compared with traditional gas chromatographic techniques, the simple method developed provided a faster chromatographic analysis with almost real-time monitoring of these acids.     

Preparation, characterization and pharmacokinetics of enrofloxacin-loaded solid lipid nanoparticles: influences of fatty acids

Enrofloxacin-loaded solid lipid nanoparticles (SLN) were prepared using fatty acids (tetradecanoic acid, palmitic acid, stearic acid) as lipid matrix by hot homogenization and ultrasonication method. The effect of fatty acids on the characteristics and pharmacokinetics of the SLN were investigated. The results showed that the encapsulation efficiency and loading capacity of nanoparticles varied with fatty acids in the order of stearic acid>palmitic acid>tetradecanoic acid. Furthermore, stearic acid-SLN had larger particle size, bigger polydispersity index (PDI) and higher zeta potential compared with the other two fatty acid formulated SLN. The SLN showed sustained releases in vitro and the released enrofloxacin had the same antibacterial activity as that of the native enrofloxacin. Although in vitro release exhibited similar patterns, within 24 h the releasing rates of the three formulations were significantly different (tetradecanoic acid-SLN>palmitic acid-SLN>stearic acid-SLN). Pharmacokinetic study after a single dose of intramuscular administration to mice demonstrated that tetradecanoic acid-SLN, palmitic acid-SLN, and stearic acid-SLN increased the bioavailability by 6.79, 3.56 and 2.39 folds, and extended the mean residence time (MRT) of the drug from 10.60 h to 180.36, 46.26 and 19.09 h, respectively. These results suggest that the enrofloxacin-fatty acid SLN are promising formulations for sustained release while fatty acids had significant influences on the characteristics and performances of the SLN.     

HPLC-separation of cis and trans monounsaturated fatty acids

Summary The chromatography of monounsaturated fatty acids as their methyl esters on silver nitrate-loaded HPLC-columns has been studied. The separation of cis- and trans-isomers was easily achieved even with columns of low performance. High-performance small-particle-columns treated with silver nitrate separated a large variety of monounsaturated cis and trans positional isomers. The influence of variable silver-loads on the selectivity of the system was studied and a survey of the distribution of positional trans C₁₈₁ isomers in commercial margarines is given.     

Kinetics of phenol hydrogenation over supported palladium catalyst

Kinetics of vapor phase hydrogenation of phenol to cyclohexanone over Pd/MgO system has been studied in a flow microreactor under normal atmospheric pressure. The reaction rate is found to be negative order with respect to the partial pressure of phenol and has increased from −0.5 to 0.5 with increasing temperature (473 to 563 K). The apparent activation energy (E_a) of the process is found to be close to 65 kJ per mol. On the basis of kinetic results a surface mechanism is proposed.     

Proline derivatives incorporating hydrophobic long-chain derived from natural and synthetic fatty acids

The α-hydrophobic long chain-α-amino esters are prepared by α-hydroxylation of a series of fatty acid esters [derived from oleic acid (OA), linoleic acid (LA), arachidonic acid (ARA) and docosahexaenoic acid (DHA)] followed by Mitsunobu reaction and hydrazinolysis of the phthalimide. These amino esters are mixed with aldehydes and electrophilic alkenes to give very good chemical yields and diastereoselectivities of prolinate derivatives incorporating a hydrophobic long chain at the α-position. This multicomponent 1,3-dipolar cycloaddition (1,3-DC) takes place at room temperature. The synthesis of the homologue hydrophobic chain of OA is performed by its oxidation to aldehyde/racemic N-tert-butylsulfinyl imine/Neff reaction. Final 1,3-DC with benzaldehyde and N-methylmaleimide affords homologue prolinate derivative in good yield.     

Ruthenium catalysed oxidation without CCl4 of oleic acid, other monoenic fatty acids and alkenes

Ruthenium catalysed oxidation of alkenes and monoenic fatty acids is reported. The study of the influence of cosolvents (H₂O/MeCN/X) shows that toxic CCl₄ initially used in the Sharpless system (H₂O/MeCN/CCl₄) can be avoided and demonstrates that the oxidative cleavage of CC bond could be accomplished in good yields with H₂O/MeCN/AcOEt solvent system in a ratio 3/2/2, respectively.     

Separation of Nile Blue-labelled fatty acids by CE with absorbance detection using a red light-emitting diode

The separation of fatty acids derivatised with Nile Blue (NB) by CE with detection using a red light-emitting diode (LED) was examined. NB was selected as the derivatisation agent due to its high molar absorption coefficient of 76,000 M(-1) cm(-1) at 633 nm, making it well suited for sensitive absorbance detection using a red 635 nm LED. NB-labelled fatty acids were separated by both MEKC using SDS micelles, i-PrOH and n-BuOH and by NACE in a number of solvents including MeOH, EtOH and ACN. The sensitivity of NACE was superior to MEKC, with detection limits of 5x10(-7)-7x10(-7) M obtained for each acid, approximately 20 times lower than the MEKC method. The NACE detection limits are approximately 100 times lower than previous reports on the separation of fatty acids by CE using indirect absorbance detection, ten times lower than using indirect fluorescence detection and are inferior only to those obtained using precapillary derivatisation and direct fluorescence detection. The efficiency of the NACE method was also superior to MEKC and allowed the separation of unsaturated fatty acids to be examined, although it was not possible to baseline-resolve linoleic (C18:2) and linolenic (C18:3) acids in a reasonable time. The method was used to analyse the fatty acid profile of two edible oils, namely sunflower and sesame oils, after alkali hydrolysis, where it was possible to identify both the saturated and unsaturated fatty acids in each sample.     

Notes on selectivity aspects in sorbic acid and sorbic alcohol hydrogenation

Sorbic acid and sorbic alcohol hydrogenations to the cis-hex-3-enoic acid or cis-hex-3-en-1-ol were carried out at the same conditions in three different systems—homogeneous, two-phase and heterogeneous. The complex [Cp*Ru(sorbic acid)]CF₃SO₃ was used as a catalyst. Selectivity and reactivity of both the compounds varied significantly. Using sorbic acid as a hydrogenation substrate by-products were the other izomers of hexenoic acid and hexanoic acid, with sorbic alcohol as a hydrogenation substrate by-products were aldehydes and hemiacetals.