The Light Tracks in the Optical Fibers with Two Types of Parabolic Refractive Indices

ＴｈｅＬｉｇｈｔＴｒａｃｋｓｉｎｔｈｅＯｐｔｉｃａｌＦｉｂｅｒｓｗｉｔｈＴｗｏＴｙｐｅｓｏｆＰａｒａｂｏｌｉｃＲｅｆｒａｃｔｉｖｅＩｎｄｉｃｅｓ￥ＳＨＥＮＷｅｎｄａ（ＤｅｐａｒｔｍｅｎｔｏｆＰｈｙｓｉｃｓ，ＳｈａｎｇｈａｉＵｎｉｖｅｒｓｉｔｙ，Ｓｈａ...     

光纤中单光子传输方程的求解及分析

量子信息在光纤中传输时,会受到光纤损耗、色散、非线性效应等多因素的影响,将产生传输态的演化与能量转移.本文以单模光纤传输方程以及电磁场量子化理论为基础,对单模光纤中基模模场进行量子化处理,推导并建立了考虑损耗、色散、非线性效应后的单光子传输方程.基于微扰法对单光子非线性传输方程进行了求解,给出了稳定解存在的必要条件及其所满足的色散方程.深入讨论了广域光功率随微扰频率的变化关系,并且分析了光纤色散、非线性效应对解的影响.为量子光纤传输系统性能的深入研究奠定了理论基础.     

Effective equation of nonlinear pulse evolution in a randomly anisotropic medium

Propagation of a light pulse through a weakly inhomogeneous optical fiber is analyzed. The non-linear envelope equation describing the evolution of polarized pulses is determined by statistical properties of inhomogeneities in the optical fiber. The isotropic Manakov system of equations is shown to be applicable in the presence of high-frequency small-scale defects in the fiber. In the presence of only large-scale inhomogeneities, the signal dynamics are described by an anisotropic system of equations.     

光隔离器法抑制Michelson干涉型光纤水听器中的SBS

光纤水听器是利用光的干涉信号进行探测的,但随着入射光功率的增加,易发生受激布里渊散射（stimulated Brillouin scattering,SBS）效应,并因而产生噪声,限制入射光功率的增加,极大地影响探测信号。为了抑制SBS效应,提高光纤水听器性能,以Michelson型光纤水听器为例,从实验和理论上研究了SBS及其阈值特性。根据阈值公式分析了提高阈值的方法,着重讨论了光隔离器法对SBS的抑制。最后利用时域有限差分方法对光纤内的入射光、Stokes光和声波的时空分布进行了分析。只要给出初始条件及光纤参数即可得出光纤内各波的时空分布。通过开展抑制此效应的研究,不仅为可调谐相干光的产生提供一个新途径,而且可作为一种有效手段来研究各种光纤系统中的散射特性。     

Refractive index profiling of a GRIN optical fiber using a modulated speckled sheet of light

A method for calculating the refractive index of GRIN optical fiber from its transverse interference pattern is presented.In this method the transverse interference fringe pattern through an optical fiber using a sheet of light is applied to get the refractive index profile of it. The optical fiber is not immersed in a matching liquid as used in different techniques [Barakat N, El-Hennawi HA, El-Zaiat SY, Hassan R. Pure Appl Opt 1996;5:27].In this method a sheet of He–Ne laser light is allowed to illuminate the fiber. The light sheet is divided into two parts, the first is refracted through the fiber while the second is used as a reference beam. Interference pattern will be obtained between these two rays displaying the refractive index variation along the fiber radius.The fringe shift of such interference pattern has been measured and used to calculate the deflection angle of light refracted by the fiber and the cladding. An equation is derived to calculate the refractive index profile difference ratio δn at different positions across the fiber cross section in terms of the corresponding deflection angle and is verified experimentally.The optical path difference between these two rays (refracted and reference beam divided by the fiber) has been derived and the fringe shift obtained has been used to calculate the refractive index profile of the fiber.Introducing a ground glass screen on the passage of the two light beams (refracted and reference beam divided by the fiber), two superimposed identical speckle patterns are formed leading to the formation of a third speckle pattern modulated by a grid structure displaying the optical thickness of the fiber.     

Compton散射对五阶非线性下零色散附近调制不稳定性的影响

应用多光子非线性Compton散射模型和非线性薛定谔方程,研究了Compton散射对五阶非线性零色散附近调制不稳定性的影响.将入射光和Compton散射光作为产生调制不稳定性的机制,分析了光纤损耗、四阶色散和五阶非线性对增益谱的影响.结果表明:散射下的正或负五阶非线性分别使零色散附近的增益谱宽和峰值比散射前增大得更大或...     

双包层掺染料聚合物光纤放大器的增益性能分析

双包层聚合物光纤放大器可以减小染料的热漂白,使用速率方程的方法,给出了一个能够全面描述双包层掺染料聚合物光纤放大器增益性能的模型,模型既考虑了染料三重态能级对速率方程的影响,又考虑了双包层结构对泵浦光的影响,可以在稳态的情况下计算放大器的各种增益性能指标.     

一种掺钕光纤激光器与倍频技术实现的数值模拟

从双包层光纤激光器的速率方程和光传输方程出发，建立数学模型，进行数值计算并对掺钕光纤激光器输出功率沿光纤的分布以及不同光纤长度下抽运功率和输出功率沿光纤的分布进行了数值模拟。以808nm半导体激光器为抽运源，掺钕双包层光纤为增益介质，并以KTP作为倍频晶体，计算并模拟其倍频效率和相位匹配角。最后，对光纤激光器及其倍频的实现进行了模拟研究。结果表明，该光纤激光器能够高效率地实现可见光输出。     

Measurement of nanosize etched pits in SiO2 optical fiber conduit using AFM

Fission fragment tracks from ²⁵²Cf have been observed in SiO₂ optical fiber, using an atomic force microscope (AFM), after a very short chemical etching in hydrofluoric acid solution at normal temperature. The nuclear track starting and evolution process is followed by the AFM direct measurements on the material surface and beyond a fine layer of the surface material. The images of the scanned cones were determined observing the two predominant energies from ²⁵²Cf fission fragments and the development of the tracks in the 150 μm diameter optical fiber conduit.     

Detailed study of null and timelike geodesics in the Alcubierre warp spacetime

The geodesic equation of the Alcubierre warp spacetime is converted into its non-affinely parametrized form for a detailed discussion of the motion of particles and the visual effects as observed by a traveller inside the warp bubble or a person looking from outside. To include gravitational lensing for point-like light sources, we present a practical approach using the Jacobi equation and the Sachs bases. Additionally, we consider the dragging and geodesic precession of particles due to the warp bubble.     

A modified equation of geodesic deviation

The equation of geodesic deviation is derived under the assumption that the geodesics are neighbouring, but their rate of separation is arbitrary, corresponding, physically, to the relative velocity of two test particles approaching that of light. Some of the consequences of the new equation are discussed.     

650nm光在Intralipid-10%中分布的测量和分析

本文提出一种用光纤测定光在生物组织模型Iitralipid内部光分布的方法并测定了650nm激光在Iitralipid 10%中的分布,该方法与各向同性球形光纤探头探测组织内光分布是一种互补的方法。实验结果揭示了在生物组织模型中不同方向散射光的分布规律,表明了不同的组织光学参数和不同直径的入射光束与光分布之间的关系;采用外推边界条件的漫射方程解拟合前向散射光的测量数据确定了组织模型的散射系数和吸收系数并得到较好的结果,所测量的光学参数与公开发表的结果比较其差别在2 35%以内。     

四种解析解设计的短程透镜卷边对损耗的影响

根据光波导短程透镜母线曲率半径与光传输损耗的关系,利用数值计算的方法,通过计算不同母线参数条件下,四种解析解设计的短程透镜母线曲率半径,研究比较了短程透镜卷边对其损耗的影响,得出了短程透镜损耗与其有效区半径关系的曲线图,发现透镜凹面半径一定时,有效区半径越小,即卷边越大时,光传输损耗越小;短程透镜的解析改进解和最优解设计的透镜卷边存在曲率奇点.并由此得出了四种解析解设计的短程透镜有效区半径选取原则及其满足低损耗条件的取值范围.     

光波导短程透镜焦点特性的分析

利用波导短程透镜的几何光学性质, 给出了短程透镜的等效光线追迹图和相位传递函数, 得到短程透镜焦点的模场分布表达式. 理论得出的焦斑光强分布和实验测得的光强分布一致.     

Soliton self-frequency shift decelerated by self-steepening

Self-steepening of ultrashort light pulses is shown to reduce the soliton self-frequency shift (SSFS) induced by the Raman effect in an optical fiber. We derive an analytical expression for the SSFS that conserves the number of photons and allows the SSFS to be calculated for arbitrary frequency profiles of fiber dispersion and Raman gain without a numerical solution of the pulse evolution equation. The accuracy of this analytical approach to SSFS calculation is tested by numerical simulations based on the generalized nonlinear Schr?dinger equation.     

Monte Carlo simulation of photon transport in a randomly oriented sphere-cylinder scattering medium

A Monte Carlo simulation tool for simulating photon transport in a randomly oriented sphere-cylinder medium has been developed. The simulated medium represents a paper pulp suspension where the constituents are assumed to be mono-disperse micro-spheres, representing dispersed fiber fragments, and infinitely long, straight, randomly oriented cylinders representing fibers. The diameter of the micro-spheres is considered to be about the order of the wavelength and is described by Mie scattering theory. The fiber diameter is considerably larger than the wavelength and the photon scattering is therefore determined by an analytical solution of Maxwell’s equation for scattering at an infinitely long cylinder. By employing a Stokes–Mueller formalism, the software tracks the polarization of the light while propagating through the medium. The effects of varying volume concentrations and sizes of the scattering components on reflection, transmission and polarization of the incident light are investigated. It is shown that not only the size but also the shape of the particles has a big impact on the depolarization.     

光子晶体光纤非线性光谱特性的理论与实验研究

光子晶体光纤具有特殊的导光机制和结构可调性,可以产生奇异的色散特性及高非线性,为非线性光纤光学领域的研究提供了新的条件。受多种非线性光学效应的共同作用,在不同泵浦光脉冲参数条件下,不同结构参数及传输特性的光子晶体光纤能产生丰富的非线性光谱。利用分步傅里叶方法求解非线性薛定谔方程,模拟飞秒激光脉冲在光子晶体光纤中的传输过程,获得输出光谱与入射光脉冲参数(泵浦光峰值功率P、泵浦光波长λ、光脉冲形状、光脉冲宽度T_FWHM)、光纤结构参数(孔间距Λ、空气填充比d/Λ、光纤长度z)、传输特性(色散、非线性系数)的关系,分析拉曼孤子、色散波、自相位调制等非线性效应产生的光谱特性。利用光子晶体光纤包层节区进行非线性光学实验研究,获得了孤子波和色散波的宽带光谱输出。理论分析与实验测量的光谱中都包括了波长0.5 μm附近可见光波段的蓝移色散波、0.82 μm波段的剩余泵浦光、1.1 μm波段的孤子波、2 μm附近的红移宽带色散波。理论分析与实验测量结果一致,阐明光子晶体光纤中非线性光谱产生的物理原理,实现了对宽带光谱的可控输出,为高非线性光子晶体光纤的结构设计、制备及非线性光谱的应用研究奠定基础。     

Fiber fuse behavior in k W-level continuous-wave double-clad field laser

In this study, original experimental data for fiber fuse in k W-level continuous-wave(CW) high power double-clad fiber(DCF) laser are reported. The propagating velocity of the fuse is 9.68 m/s in a 3.1-k W Yb-doped DCF laser. Three other cases in Yb-doped DCF are also observed. We think that the ignition of fiber fuse is caused by thermal mechanism,and the formation of bullet-shaped tracks is attributed to the optical discharge and temperature gradient. The inducements of initial fuse and formation of bullet-shaped voids are analyzed. This investigation of fiber fuse helps better understand the fiber fuse behavior, in order to avoid the catastrophic destruction caused by fiber fuse in high power fiber laser.     

Modeling and simulation of polarization errors in Sagnac fiber optic current sensor

Sagnac fiber optic current sensor (S-FOCS) is a kind of optical interferometer based on Sagnac structure, optical polarization states of sensing light wave in Sagnac fiber optic current sensor are limited. However, several factors induce optical polarization error, and non-ideal polarized light waves cause the interference signal crosstalk in sensor, including polarizer, quarter-wave retarder, splice angular, birefringence and so on. With these errors, linearly polarized light wave in PM fiber and circularly polarized light wave in sensing fiber become elliptically polarized light wave, then, nonreciprocal phase shift induced by magnetic field of the current is interrupted by wrong polarization state. To clarify characteristics of optical polarization error in fiber optic current sensor, we analyze the evolution process of random optical polarization state, linear optical polarization state and circular optical polarization state in Sagnac fiber optic current sensor by using Poincare sphere, then, build optical polarization error models by using Jones matrix. Based on models of polarization state in Sagnac fiber optic current sensor, we investigate the influence of several main error factors on optical polarization error characteristics theoretically, including extinction ratio in polarizer, phase delay in quarter-wave retarder, splice angular between quarter-wave retarder and polarization maintaining fiber. Finally, we simulate and quantify nonreciprocal phase shift to be detected in fiber optic current sensor related with optical polarization errors. In the end, we demonstrate S-FOCS in test. The results show that transfer matrix errors are induced by inaccurate polarization properties during polarization state conversion, then, the stability and accuracy of the S-FOCS are affected, and it is important to control the polarization properties at each step of the polarization state conversion precisely.