Characterization of poly(ethylene glycol) esters using low energy collision-induced dissociation in electrospray ionization mass spectrometry

A method of characterizing polyglycol esters, an important class of industrial polymer, has been developed using electrospray ionization ion trap mass spectrometry (ESI ITMS). The fragmentation behavior of polyglycol esters is found to be different from that of polyglycols whose functional end groups are linked to the polymer chain via ether bonds (i.e., polyglycol ethers). The fragmentation pattern of an oligomer ion generated by low-energy collision-induced dissociation is strongly dependent on the type of cation used for ionization. It is shown that structural information on the polymer chain and end groups is best obtained by examining the fragment ion spectra of oligomers ionized by ammonium, alkali, and transition metal ions. The application of this method is demonstrated in the analysis of two surfactants based on fatty acid methyl ester ethoxylates.     

Synthesis,Characterization and in vitro Antitumour Activity of the Di—n—butyltin（IV） Complexes of Some Arylhydroxamates

Fourteen new di-n-butyltin(IV)complexes of hydroxamic acids of the formula Bu2SnL2(HL-hydroxamic acids)were synthesized by the reaction of Bu2SnO and hydroxamic acids in dry toluene and ethanol media.The compounds were characterized by elemental analyses,molecular weight,IR and 1H NMR spectoscopy.The results indicate that n-Bu2SnL2 have distorted trans-octahedral structure.The antitumor activity in vitro against human A-549 tumor cells and P388 leukemia was presented,and their structure-activity relationship was discussed.     

Correlation of p16(INK4A) expression and HPV copy number with cellular FTIR spectroscopic signatures of cervical cancer cells

Cervical cancer, a potentially preventable disease, has its main aetiology in infection by high risk human papillomavirus (HR-HPV). Approaches to improving cervical cancer screening and diagnostic methodologies include molecular biological analysis, targeting of biomarker proteins, but also exploration and implementation of new techniques such as vibrational spectroscopy. This study correlates the biomarker protein p16(INK4A) expression levels dependent on HPV copy number with the infrared absorption spectral signatures of the cervical cancer cell lines, HPV negative C33A, HPV-16 positive SiHa and CaSki and HPV-18 positive HeLa. Confocal fluorescence microscopy demonstrated that p16(INK4A) is expressed in all investigated cell lines in both nuclear and cytoplasmic regions, although predominantly in the cytoplasm. Flow cytometry was used to quantify the p16(INK4A) expression levels and demonstrated a correlation, albeit nonlinear, between the reported number of integrated HPV copies and p16(INK4A) expression levels. CaSki cells were found to have the highest level of expression, HeLa intermediate levels, and SiHa and C33A the lowest levels. FTIR spectra revealed differences in nucleic acid, lipid and protein signatures between the cell lines with varying HPV copy number. Peak intensities exhibited increasing tendency in nucleic acid levels and decreasing tendency in lipid levels with increasing HPV copy number, and although they were found to be nonlinearly correlated with the HPV copy number, their dependence on p16(INK4A) levels was found to be close to linear. Principal Component Analysis (PCA) of the infrared absorption spectra revealed differences between nuclear and cytoplasmic spectroscopic signatures for all cell lines, and furthermore clearly differentiated the groups of spectra representing each cell line. Finally, Partial Least Squares (PLS) analysis was employed to construct a model which can predict the p16(INK4A) expression level based on a spectral fingerprint of a cell line, demonstrating the diagnostic potential of spectroscopic techniques.     

Characterization and separation of Al_(13) species using gel-filtration chromatography

Polyaluminum chloride (PAC) coagulant has been developed and widely used in water and wastewater treatment industry since the 1980s[1]. PAC is normally made by partial hydrolysis of acid aluminum chloride solution using slow alkaline titration method. However, this method would result in many different Al species. Among these Al species, it seems that tridecamer (Al13O4(OH) 724 , often denoted by Al13) is the most effective and stable polymeric Al species for water and wastewater treatme…     

Characterization of pH-induced changes in the morphology of polyelectrolyte multilayers assembled from poly(allylamine) and low molecular weight poly(acrylic acid)

We report characterization of pH-dependent behavior in polyelectrolyte multilayers (PEMs) fabricated from poly(allylamine) (PAH) and low molecular weight poly(acrylic acid) (PAA) synthesized by living/controlled polymerization. Exposure of these films to solutions of low pH (e.g. pH 2.0-3.2) resulted in transformations from films that were smooth and uniform to films with porous morphologies, as characterized by scanning electron microscopy (SEM). We observed large differences in both the extent of this transformation and the sizes of the pores that resulted compared to films fabricated using higher molecular weight PAA used in past studies. Whereas transformations reported in past studies generally lead to pores with sizes in the range of 0.3-2 μm, we observed larger-scale transformations and films with cell-like internal structures comprised of networks of closed pores, interconnected pores, and through-pores with sizes as large as 10-15 μm depending on pH and the manner in which the films were incubated. Films fabricated using fluorescently end-labeled samples of PAA permitted real-time imaging of changes in internal structure using confocal microscopy (LSCM). The results of these studies also revealed large differences in the nature of these transformations when films were placed in contact with surfaces as opposed to when dipped into aqueous solutions. Our results reveal approaches that can be used to fabricate films with large pores (e.g., pores with sizes on the order of 10-15 μm) and suggest methods that could potentially be used to generate PEMs having controlled gradients in pore size.     

Characterization of poly(2-hydroxyethyl methacrylate) (PHEMA) contact lens using the Langmuir monolayer technique

The behavior of poly(2-hydroxyethyl methacrylate) (PHEMA) polymer monolayer spread on water was studied under various experimental conditions. The influence of subphase pH and temperature, compression speed, elapsed time from the deposit of the monolayer and the recording of the surface pressure-area (π-A) isotherms, as well as the number of polymer molecules deposited at the air/water surface (surface concentration) was studied. The obtained results show that PHEMA exhibits a very stable monolayer given that it is unaffected by modifications in the majority of these variables. Only the elapsed time between the spreading of the monolayer and the beginning of compression causes a small change in the π-A isotherms that consists in an increase in the area occupied by the film. This is attributed to the greater unfolding with time of the polymer's monomers at the air/water interface. The plateau that appears on π-A curves of the PHEMA monolayer is attributed to the reorientation of their hydroxyethyl polar groups through their C-O-C bonds, as well as to the reorientation of the ethylene (CH(2)) groups that link the monomers, which provokes a folding of the polymer's chains causing an accordion configuration. The existence of this structure is confirmed by the presence of numerous noise peaks in the relative thickness versus time curve corresponding to this region. In the same fashion, the images observed from Brewster angle microscopy (BAM) reveal the existence of light-dark "bands" relative to the different regions of this particular structure.     

Studying the mechanism of RNA separations using RNA chromatography and its application in the analysis of ribosomal RNA and RNA:RNA interactions

DNA/RNA chromatography presents a versatile platform for the analysis of nucleic acids. Although the mechanism of separation of double stranded (ds) DNA fragments is largely understood, the mechanism by which RNA is separated appears more complicated. To further understand the separation mechanisms of RNA using ion pair reverse phase liquid chromatography, we have analysed a number of dsRNA and single stranded (ss) RNA fragments. The high-resolution separation of dsRNA was observed, in a similar manner to dsDNA under non-denaturing conditions. Moreover, the high-resolution separation of ssRNA was observed at high temperatures (75 °C) in contrast to ssDNA. It is proposed that the presence of duplex regions/secondary structures within the RNA remain at such temperatures, resulting in high-resolution RNA separations. The retention time of the nucleic acids reflects the relative hydrophobicity, through contributions of the nucleic sequence and the degree of secondary structure present. In addition, the analysis of RNA using such approaches was extended to enable the discrimination of bacterial 16S rRNA fragments and as an aid to conformational analysis of RNA. RNA:RNA interactions of the human telomerase RNA component (hTR) were analysed in conjunction with the incorporation of Mg²⁺ during chromatography. This novel chromatographic procedure permits analysis of the temperature dependent formation of dimeric RNA species.     

Determination of number and composition of platinum(IV) aqua complexes in solutions using mathematical statistics methods

Conclusions The formation of monoaqua compounds in acidified solutions of Pt(IV) hydroxy complexes was confirmed, and their composition was determined by comparing the curves that express the degree of forming the complexes as a function of the solution pH with the results of a statistical processing of the titration curves.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 8, pp. 1859–1861, August, 1976.     

Characterization of the malate-aluminum(III) complex using 1H and 27Al NMR spectroscopy

Structural elucidation of a malate-aluminum(III) complex has been carried out using 1H and 27Al NMR spectroscopy. The 1H chemical shift perturbation clearly indicated the interaction between malate and Al(III) ion. The measurements of 27Al NMR and 1H-13C HSQC spectra demonstrated that the major form of a complex comprised two equivalent malate ions and two unequivalent Al(III) ions. With this constraint, an equilibrium geometry of the complex was proposed by a semi-empirical molecular orbital calculation.     

Softness of atherogenic lipoproteins: a comparison of very low density lipoprotein (VLDL) and low density lipoprotein (LDL) using elastic incoherent neutron scattering (EINS)

Apolipoprotein B100 (apoB100)-containing plasma lipoproteins (LDL and VLDL) supply tissues and cells with cholesterol and fat. During lipolytic conversion from VLDL to LDL the size and chemical composition of the particles change, but the apoB100 molecule remains bound to the lipids and regulates the receptor mediated uptake. The molecular physical parameters which control lipoprotein remodeling and enable particle stabilization by apoB100 are largely unknown. Here, we have compared the molecular dynamics and elasticities of VLDL and LDL derived by elastic neutron scattering temperature scans. We have determined thermal motions, dynamical transitions, and molecular fluctuations, which reflect the temperature-dependent motional coupling between lipid and protein. Our results revealed that lipoprotein particles are extremely soft and flexible. We found substantial differences in the molecular resiliences of lipoproteins, especially at higher temperatures. These discrepancies not only can be explained in terms of lipid composition and mobility but also suggest that apoB100 displays different dynamics dependent on the lipoprotein it is bound to. Hence, we suppose that the inherent conformational flexibility of apoB100 permits particle stabilization upon lipid exchange, whereas the dynamic coupling between protein and lipids might be a key determinant for lipoprotein conversion and atherogenicity.     

Characterization of low energy charge transfer transitions in (terpyridine)(bipyridine)ruthenium(II) complexes and their cyanide-bridged bi- and tri-metallic analogues

The lowest energy metal-to-ligand charge transfer (MLCT) absorption bands found in ambient solutions of a series of [Ru(tpy)(bpy)X](m+) complexes (tpy = 2,2':3',2'-terpyridine; bpy = 2,2'-bipyridine; and X = a monodentate ancillary ligand) feature one or two partly resolved weak absorptions (bands I and/or II) on the low energy side of their absorption envelopes. Similar features are found for the related cyanide-bridged bi- and trimetallic complexes. However, the weak absorption band I of [(bpy)(2)Ru{CNRu(tpy)(bpy)}(2)](4+) is missing in its [(bpy)(2)Ru{NCRu(tpy)(bpy)}(2)](4+) linkage isomer demonstrating that this feature arises from a Ru(II)/tpy MLCT absorption. The energies of the MLCT band I components of the [Ru(tpy)(bpy)X](m+) complexes are proportional to the differences between the potentials for the first oxidation and the first reduction waves of the complexes. Time-dependent density functional theory (TD-DFT) computational modeling indicates that these band I components correspond to the highest occupied molecular orbital (HOMO) to lowest unoccupied molecular orbital (LUMO) transition, with the HOMO being largely ruthenium-centered and the LUMO largely tpy-centered. The most intense contribution to a lowest energy MLCT absorption envelope (band III) of these complexes corresponds to the convolution of several orbitally different components, and its absorption maximum has an energy that is about 5000 cm(-1) higher than that of band I. The multimetallic complexes that contain Ru(II) centers linked by cyanide have mixed valence excited states in which more than 10% of electronic density is delocalized between the nearest neighbor ruthenium centers, and the corresponding stabilization energy contributions in the excited states are indistinguishable from those of the corresponding ground states. Single crystal X-ray structures and computational modeling indicate that the Ru-(C≡N)-Ru linkage is quite flexible and that there is not an appreciable variation in electronic structure or energy among the conformational isomers.     

Characterization and forensic analysis of soil samples using laser-induced breakdown spectroscopy (LIBS)

A method for the quantitative elemental analysis of surface soil samples using laser-induced breakdown spectroscopy (LIBS) was developed and applied to the analysis of bulk soil samples for discrimination between specimens. The use of a 266 nm laser for LIBS analysis is reported for the first time in forensic soil analysis. Optimization of the LIBS method is discussed, and the results compared favorably to a laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) method previously developed. Precision for both methods was <10% for most elements. LIBS limits of detection were <33 ppm and bias <40% for most elements. In a proof of principle study, the LIBS method successfully discriminated samples from two different sites in Dade County, FL. Analysis of variance, Tukey’s post hoc test and Student’s t test resulted in 100% discrimination with no type I or type II errors. Principal components analysis (PCA) resulted in clear groupings of the two sites. A correct classification rate of 99.4% was obtained with linear discriminant analysis using leave-one-out validation. Similar results were obtained when the same samples were analyzed by LA-ICP-MS, showing that LIBS can provide similar information to LA-ICP-MS. In a forensic sampling/spatial heterogeneity study, the variation between sites, between sub-plots, between samples and within samples was examined on three similar Dade sites. The closer the sampling locations, the closer the grouping on a PCA plot and the higher the misclassification rate. These results underscore the importance of careful sampling for geographic site characterization.     

Synthesis,Characterization, and in vitro Cytotoxicity of Gold(I) Complexes of 2‐(Diphenylphosphanyl)ethylamine and Dithiocarbamates

Gold(I) complexes of 2‐(diphenylphosphanyl)ethylamine or (2‐aminoethyl)diphenylphosphine (AEP), and dithiocaarbamates (R₂NCS₂) were prepared by the reaction of these ligands with (CH₃)₂S‐AuCl in dichloromethane. The synthesized complexes [Au(AEP)Cl] ( 1 ), [Au(AEP)₂]Cl ( 2 ), and [Au₂(R₂NCS₂)₂]_n (R₂ = dimethyl ( 3 ), diethyl ( 4 ), and dibenzyl ( 5 )) were characterized by elemental analysis, IR, ¹H, ¹³C and ³¹P NMR spectroscopy. The complexes were evaluated for anticancer activity against three cancer cells, A549 (human lung carcinoma), HCT15 (human colon cancer), and MCF7 (human breast cancer) cell lines. Three of the five tested complexes showed significant in vitro cytotoxicity and for A549, the inhibition effect of three compounds is greater than cisplatin.