Chelation-assisted carbon-hydrogen and carbon-carbon bond activation by transition metal catalysts

Herein we describe the chelation-assisted C-H and C-C bond activation of carbonyl compounds by Rh1 catalysts. Hydroacylation of olefins was accomplished by utilizing 2-amino-3-picoline as a chelation auxiliary. The same strategy was employed for the C-C bond activation of unstrained ketones. Allylamine 24 was devised as a synthon of formaldehyde. Hydroiminoacylation of alkynes with allylamine 24 was applied to the alkyne cleavage by the aid of cyclohexylamine.     

Synthesis, characterisation and molecular structure of Re(III) 2-oxacyclocarbenes stabilised by a benzoyldiazenido ligand

A family of new Fischer-type rhenium(III) benzoyldiazenido-2-oxacyclocarbenes of formula [(ReCl2[eta1-N2C(O)Ph][=C(CH2)nCH(R)O](PPh3)2][n = 2, R = H (2), R = Me (3); n = 3, R = H (4), R = Me (5)] have been prepared by reaction of [ReCl2[eta2-N2C(Ph)O](PPh3)2] (1) with omega-alkynols, such as 3-butyn-1-ol, 4-pentyn-1-ol, 4-pentyn-2-ol, 5-hexyn-2-ol in refluxing THF. The correct formulation of the carbene derivatives 2-5 has been unambiguously determined in solution by NMR analysis and confirmed for compounds 2-4 by X-ray diffraction methods in the solid state. All complexes are octahedral with the benzoyldiazenido ligand, Re[N2C(O)Ph], adopting a "single bent" conformation. The coordination basal plane is completed by an oxacyclocarbene ligand and two chlorine atoms. Two triphenylphosphines in trans positions with respect to each other complete the octahedral geometry around rhenium. The reactivity of 1 towards different alkynes and alkenes including propargyl- and allylamine has been also studied. With propargyl amine, monosubstituted or bisubstituted complexes, [(ReCl2[eta1-N2C(O)Ph][eta1-NH2CH2C triple bond CH]n(PPh3)(3-n)][n= 1 (6); n = 2 (7)], have been isolated depending on the reaction conditions. In contrast, the reaction with allylamine gave only the disubstituted complex [(ReCl2[eta1-N2C(O)Ph][eta1-NH2CH2CH=CH2]2(PPh3)] (8). The molecular structure of the monosubstituted adduct has been confirmed by X-ray analysis in the solid state.     

A general and regioselective synthesis of cyclopentenone derivatives through nickel(0)-mediated [3 + 2] cyclization of alkenyl Fischer carbene complexes and internal alkynes

A broad range of substituted 2-cyclopentenone derivatives 3-6 are synthesized by the nickel(0)-mediated [3 + 2] cyclization reaction of chromium alkenyl(methoxy)carbene complexes 1 and internal alkynes 2. The reaction takes place with complete regioselectivity with both unactivated alkynes and activated alkynes (electron-withdrawing and electron-donating substituted alkynes). Representative cycloadducts containing boron and tin substituents are further demonstrated to be active partners in classical Pd-catalyzed C-C coupling processes to allow the production of 2-aryl- and 2-alkynyl-substituted cyclopentenones 9-13.     

Density functional theory studies on the mechanisms of regioselective allylic and cis-vinylic deprotonation of allyl amides and allylamines

A density functional theory (B3LYP/6-31+G) study was undertaken in an effort to learn more about the mechanisms controlling the regioselective deprotonations of the synthetically versatile N-lithio-N-(tert-butyl)allylamide 1 and N-lithio-N-(trimethylsilyl)allylamine 2 compounds. The calculations suggest that deprotonation of 1 occurs exclusively at the allylic position. This agrees with experimental results. The calculations also suggest that deprotonation of allylamine 2 exclusively at the cis-vinylic position is due to kinetic control.     

Asymmetric Dihydroxylation of Allylamine Catalyzed by Wool-OsO4 Complex

A new chiral polymer-metal complex, wool-osmium tetroxide(wool-OsO4) complex was prepared by a very simple method. This complex was found to be able to catalyze the asymmetric dihydroxylation of allylamine to get (R)-( )-3-amino-1, 2-propanediol. The experimental results showed that OsO4 content in the complex, reaction time, allylamine/OsO4 molar ratio all have great effects on the chemical and optical yields of product. Additionally, wool-OsO4 complex catalyst could be reused without remarkable change in optical catalytic activity.     

From the 2-dimensional unstable polyelectrolyte multilayer to the 3-dimensional stable dry polyelectrolyte capsules

Polystyrene-poly(acrylic acid)/poly(allylamine hydrochloride) polyelectrolyte multilayer was found to be instable and apt to reconstruct in the pure water. By depositing polystyrene-poly(acrylic acid)/poly(allylamine hydrochloride) multilayer on the polystyrene-poly(acrylic acid) hybrid CaCO(3) templates, novel polyelectrolyte capsules could be prepared after the removal of the templates. The resultant capsules could keep their three-dimensional (3D) spherical shape after being dried at room temperature, dramatically different from the conventional polyelectrolyte capsules based on nonhybrid templates by layer-by-layer procedure. The instable polyelectrolyte multilayer, hybrid templates, and assembly cycles were demonstrated to be three indispensable factors responsible for the formation of this type of 3D stable capsules. The formation mechanism was also discussed in this study.     

Photoassisted adsorption of allylamine and 1-butene on H:Si(111) studied by surface vibrational spectroscopies

Ultraviolet photoassisted adsorption of terminally double-bonded molecules, allylamine (CH2=CH-CH2-NH2) and 1-butene (CH2=CH-CH2-CH3), on hydrogen-terminated silicon (111) surface was attempted to obtain adsorbates covalently terminating the surface Si atoms. The adsorption process was monitored by high-resolution electron energy loss spectroscopy, multiple internal infrared reflection-absorption spectroscopy, and Auger electron spectroscopy. Allylamine adsorbates emerged upon delivery of allylamine gas under ultraviolet irradiation. The N-H bonds in allylamine were evidenced to survive over the photoadsorption process by vibrational analysis and by the reaction with ketene. CH3- groups were detected at low coverage, indicating anchoring of the organic moieties by the secondary (sec-) type carbon atoms, which were taken over by the primary (n-) type with increasing coverage. C-D bonds were detected after deposition on deuterium-terminated Si(111) upon incorporation of Si-terminating H into the hydrocarbon part of adsorbates. In the case of 1-butene, not only the C=C end but also the CH3- end of a molecule might attach on Si, resulting in emergence of adsorbates composed of CH2 groups. The newly obtained adsorbates are prospective as a material applied for nanolithography, fine electrochemistry, and nano-biotechnology.     

Urea photosynthesis inside polyelectrolyte capsules: effect of confined media

The influence of the restricted volume of poly(styrene sulfonate)/poly(allylamine hydrochloride) capsules of different size (2.2, 4.2, and 8.1 microm) on the TiO2-assisted photosynthesis of urea from inorganic precursors (CO2 and NO(3-)) in aqueous solution was demonstrated. Poly(vinyl alcohol) was employed as electron donor to facilitate the photosynthetic process. Decreasing the size of the confined microvolume of polyelectrolyte capsules accelerates the NO(3-) photoreduction, which is a limiting stage of the urea photosynthesis and, correspondingly, increases the efficiency of urea production. The highest yield of urea photosynthesis (37%) was achieved for Cu-modified TiO2 nanoparticles encapsulated inside 2.2 microm poly(styrene sulfonate)/poly(allylamine hydrochloride) capsules.     

Transition-metal-promoted or -catalyzed exocyclic alkyne insertion via zirconacyclopentene with carborane auxiliary: formation of symmetric or unsymmetric benzocarboranes

Reactions of Cp(2)Zr(μ-Cl)(μ-C(2)B(10)H(10))Li(OEt(2))(2) with alkynes R(1)C≡CR(2) gave as insertion products zirconacyclopentenes incorporating a carboranyl unit, 1,2-[Cp(2)ZrC(R(1))═C(R(2))]-1,2-C(2)B(10)H(10) (1). Treatment of 1 with another type of alkyne R(3)C≡CR(4) in the presence of stoichiometric amounts of NiCl(2) and FeCl(3) or a catalytic amount of NiCl(2) afforded symmetric or unsymmetric benzocarboranes. The regioselectivity was dominated by the polarity of the corresponding alkynes. These reactions could also be carried out in one pot, leading to the equivalent of a three-component [2 + 2 + 2] cycloaddition of carboryne and two different alkynes promoted by transition metals. A reaction mechanism was proposed after the isolation and structural characterization of the key intermediate nickelacycle. These results show that nickel complexes are more reactive than the iron ones toward the insertion of alkynes but that the latter do not initiate the trimerization of alkynes, making the insertion of activated alkynes possible. This work also demonstrates that a catalytic amount of nickel works as well as a stoichiometric amount of nickel in the presence of excess FeCl(3) for the reactions. Such a catalytic reaction may shed some light on the development of zirconocene-based catalytic reactions.     

Rhodium-Catalyzed Reaction of Aroyl Chlorides with Alkynes

Aroyl chlorides react with terminal alkynes accompanied by decarbonylation in the presence of a catalytic amount of [RhCl(cod)](2) and PPh(3) to give the corresponding vinyl chloride derivatives regio- and stereoselectively in good yields. The catalyst efficiency is a marked function of the ratio of PPh(3) to the rhodium species; satisfactory results are obtained by employing a PPh(3)/Rh ratio of 1.0. The reaction may involve chlororhodation to the alkynes by the intermediary arylchlororhodium(III) species generated in situ followed by reductive elimination of the products, which are suggested by the results of some control experiments. In contrast to the reaction with terminal alkynes, that with some internal ones proceeds without decarbonylation to produce 2,3-disubstituted-1-indenones as the predominant products. The product structures suggest that, while the arylchlororhodium intermediate is also involved, arylrhodation to the alkynes, reinsertion of CO (coordinated to the metal), and intramolecular cyclization sequentially take place to give the indenones.     

Cyclohydrocarbonylation of substituted alkynes and tandem cyclohydrocarbonylation-CO insertion of alpha-keto alkynes catalyzed by immobilized Co-Rh heterobimetallic nanoparticles

The use of cobalt-rhodium (Co(2)Rh(2)) heterobimetallic nanoparticles in the cyclohydrocarbonylation of substituted alkynes and tandem cyclohydrocarbonylation-CO insertion of alpha-keto alkynes to give 2(3H)- or 2(5H)-furanones is described.     

Regioselectivity in the diels-alder reactions of α-pyrones with alkynes

4-Ethyl-5-methyl-6-methylthio-2(H)-pyranone (4) undergoes Diels-Alder reactions with ethyl hexynoate (5), 3-heptyn-2-one (6), ethyl propiolate (7), and 3-butyn-2-one (8) to afford substituted benzenes with high regioselectivity upon extrusion of CO₂. 4-Ethyl-5,6-dimethyl-(1), 4-ethyl-3,6-dimethyl-(2) and 4-ethyl-5-methyl-(2H)-pyranone (3) gave excellant to good regioselectivity with internal alkynes 5 and 6 and poor regioselectivity with terminal alkynes 7 and 8. MNDO calculations have been carried out on the pyrones and alkynes and qualitative FMO analysis correctly predicts the major products.     

Au(Ⅰ)配合物催化剂室温高效催化炔烃水合反应

合成了一系列(1,1'-联苯)-2-二(1-金刚烷基)磷配体, 并制备出8种相应的Au(Ⅰ)配合物. 以甲醇为溶剂, 在6-十二炔水合反应中考察了8种Au(Ⅰ)配合物的催化性能, 结果表明, 以含有3'-(吡咯-1-羰基)官能团的Au(Ⅰ)配合物为催化剂时, 其用量仅需炔烃用量的0.1%~0.3%(摩尔分数), 室温下即可高效地催化炔烃进行水合反应.     

Poly(allylamine) beads as selective sorbent for preconcentration of formaldehyde and acetaldehyde in high-performance liquid chromatographic analysis

Formaldehyde and acetaldehyde in water were determined by preconcentration with poly(allylamine) beads, derivatization with 2,4-dinitrophenylhydrazine (DPH) and analysis by HPLC. Poly(allylamine) beads (0.5 g) were used to adsorb formaldehyde and acetaldehyde at 1.2-150 microg l(-1) and 3.5-220 microg l(-1) from water (1 l). The concentration factor is 50 fold. The aldehydes were eluted and derivatized with 2 mM DPH in 0.5 M H2SO4 (10 ml). The time of analysis was 1 h. The detection limits (S/N=3) for formaldehyde and acetaldehyde were 0.6 and 2 microg l(-1), respectively.     

Electrostatic long-range and short-range interactions in linear poly(allylamine hydrochloride) chains

The efficiencies of two azo initiators in the polymerization of allylamine salts in water and organic solvents were compared. The hydrodynamic and molecular characteristics of poly(allylamine hydrochloride) in 0.1 M NaCl in the molecular mass range M×10^?3=18?65 were studied, and the scaling relationships were derived for the intrinsic viscosity ([η]=7.65×10^?3 M ^0.8±0.1), translational diffusion coefficient (D ₀=2.41×10^?4 M ^{?(0.59±0.05)}), and velocity sedimentation coefficient (s ₀=2.77×10^?15 M ^0.41±0.05). The hydrodynamic data were interpreted in terms of electrostatic long-range and short-range interactions. The equilibrium rigidity of poly(allylamine hydrochloride) chains in 0.1 M NaCl and its structural and electrostatic constituents were quantitatively estimated. It was shown that the conformation of poly(allylamine hydrochloride) chains in pure water is close to rodlike.     

Amine- and phosphine-free palladium(II)-catalyzed homocoupling reaction of terminal alkynes

An efficient, amine- and phosphine-free palladium(II)-catalyzed homocoupling of terminal alkynes has been developed. In the presence of PdCl₂, CuI, Me₃NO, and NaOAc, homocoupling of various terminal alkynes underwent smoothly to afford the corresponding diynes in moderate to high yields without any phosphine ligands. In contrast, the presence of a phosphine ligand (PPh₃) disfavored this palladium-catalyzed homocoupling procedure. Bases, solvents, and CuI have fundamental influence on the palladium-catalyzed homocoupling of terminal alkynes.     

Intra- and intermolecular reactions of indoles with alkynes catalyzed by gold

Indoles react intramolecularly with alkynes in the presence of gold catalysts to give from six- to eight-membered-ring annulated compounds. The cationic Au(I) complex [Au(P{C(6)H(4)(o-Ph)}(tBu)(2))(NCMe)]SbF(6) is the best catalyst for the formation of six- and seven-membered rings by 6-endo-dig, 6-exo-dig, and 7-exo-dig cyclizations. Indoloazocines are selectively obtained with AuCl(3) as catalyst in a rare 8-endo-dig process. In this process allenes or tetracyclic annulated derivatives are also formed as a result of an initial fragmentation reaction. The intermolecular reaction of indoles with alkynes proceeds to form 3-alkenylated intermediates that react with a second equivalent of indole to give bisindolyl derivatives. Indoles that are substituted at the 3-position react intermolecularly with alkynes to give 2-alkenylated intermediates that can be trapped intramolecularly with the appropriate nucleophiles.     

Difluoro-lambda3-bromane-induced oxidative carbon-carbon bond-forming reactions: ethanol as an electrophilic partner and alkynes as nucleophiles

Reported here for the first time are the oxidative couplings of alkynes and primary alcohols yielding conjugated enones. Although the BF3-catalyzed reaction of terminal alkynes with p-trifluoromethylphenyl(difluoro)-lambda3-bromane results in the fluoro-lambda3-bromanation of triple bonds to afford (E)-beta-fluorovinyl-lambda3-bromanes, reaction of an alkyne with the difluoro-lambda3-bromane in the presence of an alcohol and BF3-Et2O affords directly conjugated enones in good yields. The reaction proceeds in a highly stereo- and regioselective manner under metal-free conditions. Interestingly, no formation of enones was detected, when difluoro-lambda3-iodane p-CF3C6H4IF2 was used instead of the lambda3-bromane. A mechanism involving a lambda3-bromane-induced oxidation of an alcohol to an aldehyde, [2 + 2] cyclization with alkynes yielding 2H-oxetes, and finally the electrocyclic ring opening is discussed.     

A facile regiocontrol in the palladium-catalyzed annulation of fluorine-containing internal alkynes with variously substituted 2-iodoanilines: a new regioselective synthesis of 2- or 3-fluoroalkylated indole derivatives

Treatment of various types of fluoroalkylated alkynes with o-iodoaniline in the presence of Pd(PPh(3))(4) in DMF at 80 degrees C for 8 h mainly gave 2-fluoroalkylated indoles in high yields. The use of P(o-Tol)(3) instead of PPh(3) as a ligand led to the preferential formation of 3-fluoroalkylated indoles in high yields. Interestingly, the reaction of trifluoromethylated alkynes bearing a benzylic substituent afforded 2- or 3-trifluoroethylated indole derivatives in good yields.     

Synthesis of isoquinolines and pyridines by the palladium-catalyzed iminoannulation of internal alkynes.

A wide variety of substituted isoquinoline, tetrahydroisoquinoline, 5,6-dihydrobenz[f]isoquinoline, pyrindine, and pyridine heterocycles have been prepared in good to excellent yields via annulation of internal acetylenes with the tert-butylimines of o-iodobenzaldehydes and 3-halo-2-alkenals in the presence of a palladium catalyst. The best results are obtained by employing 5 mol % of Pd(OAc)(2), an excess of the alkyne, 1 equiv of Na(2)CO(3) as a base, and 10 mol % of PPh(3) in DMF as the solvent. This annulation methodology is particularly effective for aryl- or alkenyl-substituted alkynes. When electron-rich imines are employed, this chemistry can be extended to alkyl-substituted alkynes. Trimethylsilyl-substituted alkynes also undergo this annulation process to afford monosubstituted heterocyclic products absent the silyl group.