A Convenient One-Pot Synthesis of N-Alkylanilines from Benzanilides

The direct synthesis of secondary amines from the corresponding primary amines by alkylation has been widely used. The major drawback, however, consists of polyalkylation. Several procedures exist for the solution of the problem. Some of the early methods involve reduction³, or alkylative hydrolysis⁴ of Schiff base. Other methods include acid hydrolysis of alkylated formanilides prepared from primary aromatic amine and trialkyl orthoformate⁵, or acid hydrolysis of N-alkylated phosphinamides⁶, or zinc cleavage of N-alkylated phenacylsulfonamides⁷, or reductive deprotection of N-alkylated trifluoromethanesulfonamides⁷. This latter method is analogous to the Gabriel synthesis of     

Derivatization of Humic Compounds: An Analytical Approach for Bound Organic Residues

Abstract

Bound residues of pesticides and their metabolites are defined as being nonextractable with organic solvents, but partly extractable together with the humic matrix by NaOH or other solvents suitable to extract humic compounds. Recently, an improvement in humus extraction from soils was achieved upon derivatization of the organic matter with silylating reagents at room temperature. By this method 70–90% of the organic carbon or nitrogen either from soil or from humin became soluble in organic solvents. The extracts were analyzed by means of ¹³C NMR-spectroscopy. The spectra were well resolved with signal-separation of less than 1 ppm. The extracted humic compounds were of rather low molecular weight, ranging from 300 to 4000 to 6000 d or more.

¹⁴C-labeled residues of pesticides or other xenobiotics found to be nonextractable after exhaustive organic solvent extraction became readily dissolved along with most of the humic matrix using this derivatization procedure. Between 60–80% of ¹⁴C anilazine residues or of ¹⁴C-labeled chlorinated phenols or anilines originating from both previously solvent extracted soil samples or from humin became solubilized in organic solvents.     

Solvent Extraction Separation of Zirconium (iv) With Anberlite LA - 1 From Citrate Solutions

Abstract

Zirconium was quantitatively extracted with 8 × 10^?2 M of Amberlite LA-1 or LA-2 xylene from 0.001 M citric acid at pH 3.5 and it was stripped from the organic phase with 2 M hydrochloric acid and was determined spectrophotometrically at 665 nm as its complex with arsenazo III. Zirconium was separated from binary as well as tertiary mixtures by exploiting the difference in the distribution coefficient or by selective extraction or selective stripping. The method was applied for the analysis of zircon.

Zirconium was extracted as its anionic complex with various mineral acids by liquid anion exchanger. The chlorocomplex of zirconium was extracted from 6–10 M hydrochloric acid with trioctylamine^1–5, triisooctylamine⁶ or Aliquat 3365⁷. The sulphotocomplex of zirconium was extracted with Aliquat 3365⁸, Primine JMT⁹, Alamine 336¹⁰. The nitratocomplex was less extensively utilised for the extractive separation of zirconium^{11, 12}.

Zirconium was extracted quantitatively from oxalate^{13, 14} and malonate media¹⁵. These extractions were carried out at low pH and separated zirconium from large number of associated elements. The ion exchange chromatographic behaviour of zirconium on column with cation exchange^16–17 or with anion exchange¹⁸ resin with citric acid as eluent were utilised but extraction studies from citrate solutions were never attempted.

From the critical study of existing methods it was observed that zirconium was extracted at narrow pH range; with high concentration of complexing ligand for extraction with liquid anion exchangers and long period of equilibration for extraction as well as stripping. So also such extractions were possible mostly at milligram concentrations involving use of hazardous diluents like benzene. In order to circumvent these difficulties an attempt was made to develop a better method for the solvent extraction separation of zirconium by ion pair formation.

Therefore this paper presents systematic investigations on the solvent extraction separation of zirconium from citrate media with liquid anion exchangers. From the study of various factors. The optimum conditions for the extraction and the separation of zirconium from associated elements are evaluated. The method has been extended for the analysis of zirconium from zircon.     

Natural radioactivity in bioassay by alpha-spectrometry measurements

Personnel of nuclear facilities are checked regularly for internal contamination by bioassay measurements. Although these persons are generally not involved in any incident, natural radioactivity from U, Th and Ra can be found in their urine or faeces. Uranium total activity in urine has been found with a range of 0.051 to 3.0 mBq/24 h and in faeces from 14.5 to 380 mBq/d. ²³⁴U/²³⁸U ratio for urine is 1.48 but this ratio varies from 0.47 to 19. By comparison, the ²³⁴U/²³⁸U ratio found in urine from workers in volved with natural uranium or 4.5% enriched uranium is 1.0 and around 4.0 respectively. ²³⁰Th, ²²⁸Th and sometimes ²³²Th have also been detected. The total thorium activity varies from 0.137 to 5.6 mBq/24 h in urine and from 9 to 183 mBq/d in faeces. ²²⁸Th has generally been found in excess of ²³²Th. All these measurements were performed by alpha-spectrometry. The few ²²⁶Ra results have been measured using the Lucas or emanation method.     

Ligand exchange reactions with η6-arene-η5-cyclopentadienyliron cations under thermal or photochemical conditions

Reactions of various η⁶-arene-η⁵-cyclopentadienyliron or substituted cyclopentadienyliron cations with trimethyl, triethyl or triphenyl phosphite under either thermal or photochemical conditions all resulted in the replacement of the arene ligand with three phosphite ligands to give η⁵-tris(trimethyl, triethyl or triphenyl phosphite)-η⁵-cyclopentadienyliron or substituted cyclopentadienyliron cations. The yields of the phosphite complexes were higher from photolysis than from the analogous thermolysis. Photolysis of the η⁶-chlorobenzene-η⁵-cyclopentadienyliron cation (IX) carried out in the presence of a more basic or more electron-rich aromatic ligand resulted in the exchange of the chlorobenzene of IX with the more basic arene, thus providing synthetic routes to cyclopentadienyliron complexes that may be difficult to prepare by other means. New complexes synthesized in this way are the η⁶-2-phenylethyl tosylate-η⁵-cyclopentadienyliron cation and the CpFe⁺ complexes of thiophene, 2-methylthiophene, 3-methylthiophene and 2,5-dimethylthiophene.     

Furan derivatives. Part 8 On substituent effects in the synthesis of 4,5-dihydro-3H-naphtho[1,8-bc]furans

4,5-Dihydro-3H-naphtho[1,8-bc]furans 4 and 6 which have various substituents (R¹ and R²) have been synthesized from 8-oxo-5,6,7,8-tetrahydro-1-naphthyloxyacetic acids 1 and 3 or their ethyl esters 2 . The reaction of acids 1 and 3 with sodium acetate in acetic anhydride gave a mixture of furans 4 and 6 and lactones 5 and 7 . The ratios of the products were varied according to the types of substituents (R¹ and R²) in acids 1 and 3 . As the substituent R¹ (R² = hydrogen) in acids 1 was changed from hydrogen to a methyl, ethyl or isopropyl group, production of furans 4 became more difficult. However, when a phenyl group was used as the substituent, furan 4 was obtained in good yield. Similarly, as the substituent R² (R¹ = hydrogen) in acids 1 was changed from hydrogen to a methyl, ethyl or isopropyl group, furan formation was more difficult. In contrast, acids 3 which had electron-withdrawing substituents such as chlorine, bromine or a nitro group at the 4-position afforded furans 6 in good yield. 4,5-Dihydro-3H-naphtho[1,8-bc]furans 4 and 4,5-dihydro-3H-naphtho[1,8-bc]furan-2-carbocylic acids 8 were synthesized from the reaction of esters 2 and potassium hydroxide in dioxane. When the substituents R¹ or R² in esters 2 were varied from hydrogen to a methyl, ethyl or isopropyl group the total yields of furans 4 and furancarboxylic acids 8 were reduced.     

Assessment of intake of a complex radionuclide bearing dust formed at a nuclear power plant

The aim of this work was to provide an experimental basis for assessing intakes of an industrial actinide-bearing dust from measurements of⁶⁰Co and¹³⁷Cs in the body or urine. Whilst these radionuclides comprised 72% and 19% of the radioactivity present, greater than 90% of the committed effective dose will result from the low concentrations of the actinides present, 0.4%. To assess the dose coefficient for the dust and predict the biokinetics of⁶⁰Co and¹³⁷Cs in workers, absorption parameters for transfer from lungs to blood obtained from an animal study were combined with information on particle deposition and clearance from the ICRP human respiratory tract model and with tissue distribution and excretion data from the most recent systemic models. All other radionuclides were assumed to have Type M absorption characteristics. The dose coefficient for the dust, 1.29·10^–7 Sv·Bq^–1 was estimated to contain 113 kBq⁶⁰Co, 29 kBq¹³⁷Cs and 0.64 kBq of the actinides. The predicted retention and excretion characteristics of⁶⁰Co and¹³⁷Cs in workers after acute or chronic exposure to the dust suggested that measurements of these radionuclides in the body or urine could detect intakes equivalent to a few percent of an annual dose limit of 20 mSv·y^–1.     

Natural and anthropogenic radionuclides in the rivers of Azerbaijan

In the frame of an International Atomic Energy Agency Technical Cooperation project, a radiological survey was performed in the Araks and Kura Rivers (Azerbaijan). Sediment samples, and where available, aquatic plants were collected along these two rivers and their inflow and tributary rivers. ¹³⁷Cs, ²³⁸U, ²³⁴U, ^239+240Pu, ²³⁸Pu, ⁹⁰Sr and ²⁴¹Am activity concentrations were measured. The radionuclide levels measured were relatively low, and in most cases below the detection limit, as compared with those from other areas of the world which have been directly affected by effluents from nuclear installations or influenced by the Chernobyl accident. The results indicated that the radionuclides are of natural origin or attributable to the atmospheric fallout from nuclear weapons tests or to the Chernobyl-derived deposition.     

Study of the structure of molecular complexes. Coordination numbers for Li+, Na+, K+, F− and Cl− in water

A cluster of 200 water molecules containing a single ion (either Li⁺ or Na⁺ or K⁺ or F^? or Cl^?) has been studied at T = 298 K using Monte Carlo techniques. The waterwater interaction is obtained from a quantum-mechanical study of CI type; the ionwater potentials have been obtained from HartreeFock type computations. The computed coordination numbers in the first shell for Li⁺, Na⁺, K⁺, F^? and Cl^? are 4.0, 4.3, 5.1, 3.85 and 4.3, respectively; the corresponding first hydration shell radii are 2.28 Å, 2.59 Å, 3.27 Å, 1.99 Å and 2.85 Å, respectively. A discussion of the second and third hydration shell radii and coordination numbers is given.     

Benzene as a selective chemical ionization reagent gas

Dilute mixtures of C₆H₆ or C₆D₆ in He provide abundant [C₆H₆]^+· or [C₆D₆]^+· ions and small amounts of [C₆H₇]⁺ or [C₆D₇]⁺ ions as chemical ionization (CI) reagent ions. The C₆H₆ or C₆D₆ CI spectra of alkylbenzenes and alkylanilines contain predominantly M^+· ions from reactions of [C₆H₆]^+· or [C₆D₆]^+· and small amounts of MH⁺ or MD⁺ ions from reactions of [C₆H₇]⁺ or [C₆D₇]⁺. Benzene CI spectra of aliphatic amines contain M^+·, fragment ions and sample-size-dependent MH⁺ ions from sample ion-sample molecules reactions. The C₆D₆ CI spectra of substituted pyridines contain M^+· and MD⁺ ions in different ratios depending on the substituent (which alters the ionization energy of the substituted pyridine), as well as sample-size-dependent MH⁺ ions from sample ion-sample molecule reactions. Two mechanisms are observed for the formation of MD⁺ ions: proton transfer from [C₆D₆]^+· or charge transfer from [C₆D₆]^+· to give M^+·, followed by deuteron transfer from C₆D₆ to M^+·. The mechanisms of reactions were established by ion cyclotron resonance (ICR) experiments. Proton transfer from [C₆H₆]^+· or [C₆D₆]^+· is rapid only for compounds for which proton transfer is exothermic and charge transfer is endothermic. For compounds for which both charge transfer and proton transfer are exothermic, charge transfer is the almost exclusive reaction.     

pH‐Dependent Degradation of Layered Black Phosphorus: Essential Role of Hydroxide Ions

The practical application of layered black phosphorus (LBP) is compromised by fast decomposition in the presence of H₂O and/or O₂. The role of H₂O is controversial. Herein, we propose a hydroxide ion (OH^?)‐initiated degradation mechanism for LBP to elucidate the role of H₂O. We found that LBP degraded faster in alkaline solutions than in neutral or acidic solutions with or without O₂. Degradation rates of LBP increased linearly from pH 4 to 10. Density functional theory (DFT) calculations showed that OH^? initiated the decomposition of LBP through breaking the P?P bond and forming a P?O bond. The detection of hypophosphite, generated from OH^? reacting with P atoms, confirmed the hypothesis. Protons acted in a way distinctive from OH^?, by inducing deposition/aggregation or forming a cation–π layer to protect LBP from degradation. This work reveals the degradation mechanism of LBP and thus facilitates the development of effective stabilization technologies.     

Production of115mIn using bis(2-ethyl hexyl) phosphoric acid (HDEHP)

A rapid method for the production of^115mIn from irradiated cadmium is described. The procedure of the method is based on the extraction of^115mIn by bis(2-ethyl hexyl) phosphoric acid (HDEHP) from 0.1N sulphuric acid. Accumulated^115mIn can then be reextracted into diluted hydrochloric, hydrobromic, nitric or sulphuric acid solutions with a concentration of 1N or higher. A summary on the behaviour of cadmium and indium extraction with the solvent was given as a preliminary step in the present study. The produced^115mIn was found to be free from any cadmium as well as from any other foreign activity.     

Selective ion-exchangers containing phosphorus in their functional groups

A series of selective ion-exchangers was synthetized, containing phosphinic or phosphonic acid functional groups. The selective sorption of Sc³⁺, Fe³⁺, Ga³⁺, In³⁺, Al³⁺, La³⁺, Pb²⁺, Co²⁺ and Ca²⁺ ions in 0.1–4.0M HNO₃ medium was investigated using a batch experiment technique. The selectivity of these exchangers generally decreased in the order: Sc>Fe>In>Ga>Al>La>Pb>Cu>Co>Ca. The observed large differences in selectivity resulted in effective separation procedures of scandium from lanthanides, and gallium (or indium) from bivalent elements. The selective separation of these ions from their different mixtures is also possible.     

Lipid barrier layers on surfaces of synthetic water permeable membranes

Barrier layers (area 0.79 cm²) from oxidized cholesterol or mixtures of oxidized cholesterol with phosphatidyl serine or phosphatidyl ethanol amine were formed on surfaces of different water-permeable synthetic membranes in 0.1 M NaCl as models of biological membranes. Ionic conductivity across the membranes decreased from 10⁻²-10⁻³ to 10⁻⁷-10⁻⁸ Ω⁻¹ cm⁻² when the barrier layers were formed on their surfaces. Average thicknesses of barrier layers 4.5–11 nm were estimated from electric capacitance. The layers were unstable with lifetimes ranging from several minutes to 50 hr according to the support membrane used. The interfacial tension between synthetic membrane surface and either water or lipid solution was calculated from contact angle measurement. The relation between barrier layer stability and hydrophobic and polar interaction of lipids with support surface was studied. The most stable barrier layers (lifetimes 30–50 hr) were formed on cellophane and gelatin membranes with surfaces hydrophobized by reaction with palmytoyl chloride.     

Untersuchungen zu einer IR-spektrophotometrischen Bestimmung von 15N und 18O

¹⁵N or ¹⁸O from organic compounds must be converted into substances suitable for infra-red analysis via ammonia or water, respectively. NH₃ can be reacted quantitatively in the mmole scale with sulphochlorides or halonitrobenzenes; H₂O adds quantitatively to carbodiimides or inamines. The shifts of some IR-absorption bands of the labelled reaction products are given. The dependence of the carbonyl adsorbancy of N,N′-di-p-tolyl-urea on the ¹⁸O-content is demonstrated. Prom the amplitude of the N-H-absorption in difference spectra of ¹⁵N-2,4-dinitro-aniline samples against ¹⁴N-2,4-dinitroaniline a calibration curve is obtained, which can be used for determining the ¹⁵N content of test substances. The scope of the method is discussed.     

An investigation of Prussian Blue analogues by Mössbauer spectroscopy and magnetic susceptibility

The Mössbauer spectra and magnetic susceptibilities have been obtained for a series of Prussian Blue analogues of general formula M_j^A[M^B(CN)₆]_k·mH₂O where M^A and M^B are transition metal ions, j and k vary with the oxidation states of M^A and M^B and m typically has values from 8 to 14. The compounds were prepared from the hexacyano acids or with large quaternary ammonium counterions and are therefore not contaminated with alkali cations. In each analogue, A or B is iron and the second metal is Mn, Cu, Co, Cr or Ru. In each case it was possible to assign the site (A or B), oxidation state and spin state to each transition metal ion. This group of compounds are all class II mixed valence species from their colours, but do not show evidence of linkage isomerism or redox changes compared to the starting materials. The Mössbauer linewidths are consistent with the Ludi model of Prussian Blue.     

Sequential Injection Lab‐on‐Valve Procedure for the Determination of Amantadine Using Potentiometric Methods

Amantadine potentiometric detectors were developed, evaluated and incorporated in a SIA‐LOV manifold in order to accomplish the control of pharmaceutical formulations and urine. The electrodes incorporate α‐cyclodextrin as ionophore, dibutyl phthalate or 2‐fluorophenyl 2‐nitrophenyl ether as plasticizers and potassium tetrakis[3,5‐bis‐(trifluoromethyl)phenyl]borate (KTFPB) as cationic additive. The slope increased from 61.2 to 63.8 mV decade^?1 and the practical limit of detection from 2.6×10^?6 mol L^?1 to 2.5×10^?5 mol L^?1 when the plasticizer was changed from 2‐fluorophenyl 2‐nitrophenyl ether to dibutyl phthalate. When incorporated in the flow‐manifold the membranes composed by dibutyl phthalate or with 2‐fluorophenyl 2‐nitrophenyl ether presented slopes and a practical limit of detection of 69.8 mV decade^?1 and 1.5×10^?4 mol L^?1 or 73.7 mV decade^?1 and 5.4×10^?5 mol L^?1, respectively. The electrode presented stable responses for over a year, and were highly selective concerning the representative species of the two sample matrices assayed as interferents. Comparison of obtained results with those provided by reference methods and recovery assays, revealed adequate accuracy for control assays.     

Transport of Na+, K+ ions in a bubbling pseudo-emulsion liquid membrane system with p-tert-butylcalixarenes as carriers

The liquid membrane transport of Na⁺ ions by p-tert-butylcalix[6]arene and that of K⁺ ions by p-tert-butylcalix[8]arene were investigated by means of a bubbling pseudo-emulsion liquid membrane system. This system represents a proton-coupled transport with a flow of protons in the opposite direction. The driving force for the transport is the pH gradient between the source and receiving phases. When the pH difference between the two phases is sufficient, the carriers calix[6]arene(or calix[8]arene) can successfully transport Na⁺ (or K⁺) ions from the source phase with a lower Na⁺ (or K⁺) concentration into the receiving phase with a higher Na⁺ (or K⁺) concentration, like a Na⁺ (or K⁺) ion pump.     

Organomanganese (II) Reagents: V1: Organomanganous Chlorides as a New Reagent for Ketone Synthesis via Mixed or Symmetrical Anhydrides

We have recently described an efficient preparation of ketones (or esters) from organomanganous iodides (RMnI) and acid chlorides² (or chloro-carbonates³). The scope of this reaction is very large and RMnI is often superior to other organometallics. However, the major limitations of this reaction are^2b: