A systematic study of the interactions between chemical partners (metal, ligands, counterions, and support) involved in the design of Al2O3-supported nickel catalysts from diamine-Ni(II) chelates

1.5 Ni wt %/Al2O3 catalysts have been prepared by incipient wetness impregnation using [Ni(diamine)x(H2O)(6-2x)]Y2 precursors (diamine = 1,2-ethanediamine (en) and trans-1,2-cyclohexanediamine (tc); x = 0, 1, and 2; Y = NO3- and Cl-), to avoid the formation, during calcination, of difficult-to-reduce nickel aluminate. N2 was chosen for thermal treatment to help reveal and take advantage of the reactions occurring between Ni2+, ligands, counterions, and support. In the case of [Ni(en)2(H2O)2]Y2 salts used as precursors, in situ UV-vis and DRIFT spectroscopies show that after treatment at 230 degrees C Ni(II) ions are grafted to alumina via two OAl bonds and that the diamine ligands still remain coordinated to grafted nickel ions but in a monodentate way, bridging the cation with the alumina surface. With Y = Cl-, the chloride counterions desorb as hydrogen chloride, and hydrogen released upon decomposition of the en ligands is able to reduce a fraction of nickel ions into metal as evidenced by XPS. In contrast, with Y = NO3-, compounds such as CO or NO are formed during thermal treatment, indicating that nitrate ions burn the en ligands. After thermal treatment at 500 degrees C, a surface phase containing Ni(II) ions forms, characterized by XPS and UV-vis spectroscopy. Temperature-programmed reduction shows that these ions can be quantitatively reduced to the metallic state at 500 degrees C, in contrast with the aluminate obtained when the preparation is carried out from [Ni(H2O)6]2+, which is reduced only partly at 950 degrees C. On the other hand, a total self-reduction of nickel complexes leading to 2-5-nm metal particles is obtained upon thermal treatment via the hydrogen released by a hydrogen-rich ligand such as tc, whatever the Y counterion. An appropriate choice of the ligand and the counterion allows then to obtain selectively Ni(II) ions or a dispersed reduced nickel phase after treatment in N2, as a result of the reactions occurring between the chemical partners present on alumina.     

Gas production in the radiolysis of poly(vinyl chloride)

The yields of H2 and Cl- were determined in the radiolysis of deaerated, aerated, and water mixtures of poly(vinyl chloride) (PVC) powders with gamma-rays and 5 MeV He ions. H2 yields with gamma-rays are low at about 0.25 molecule/100 eV and they double with He ion radiolysis indicating a second order formation process. The production of H2 in the gamma-radiolysis of water-PVC mixtures is much greater than expected from the weight fraction of the components and is due to acidification of the aqueous phase by the evolution of HCl from the polymer. Cl- yields in the gamma-radiolysis of PVC with number average weights of 22,000, 47,000, and 99,000 Daltons are 19.6, 33.8, and 32.5 atoms/100 eV. Cl- continuously evolves from the polymer for days following radiolysis. The extremely large yields suggest that a chain process involving radicals stabilized on the polymeric chain are responsible. Reflectance UV/vis and infrared spectroscopy show subtle changes in the PVC with radiolysis while UV/vis absorption spectra clearly indicate the formation of polyenes with 1 to 11 units. Cl- formation is probably initiated by Cl radical production followed by an electron rearrangement mechanism along the PVC chain to produce more Cl- and polyenes.     

Kinetic and mechanistic study on the reactions of [Pt(bpma)(H2O)]2+ and [Pd(bpma)(H2O)]2+ with some nucleophiles. Crystal structure of [Pd(bpma)(py)](ClO4)2

Substitution reactions of the complexes [Pd(bpma)(H2O)]2+ and [Pt(bpma)(H2O)]2+, where bpma = bis(2-pyridylmethyl)amine, with TU, DMTU and TMTU for both complexes and Cl-, Br-, I- and SCN- for the platinum complex, were studied in aqueous 0.10 M NaClO4 at pH 2.5 using a variable-temperature stopped-flow spectrophotometer. The pKa value for the coordinated water molecule in [Pd(bpma)(H2O)]2+ (6.67) is a unit higher than that of [Pt(bpma)(H2O)]2+. The observed pseudo-first-order rate constants k(obs) (s(-1)) obeyed the equation k(obs) = k2[Nu] (Nu = nucleophile). The second-order rate constants indicate that the Pd(II) complex is a factor of 10(3) more reactive than Pt(II) complex. The nucleophile reactivity attributed to the steric hindrance in case of TMTU and the inductive effect for DMTU was found to be DMTU > TU > TMTU for [Pt(bpma)(H2O)]2+ and DMTU approximately TU > TMTU for [Pd(bpma)(H2O)]2+. The trend for ionic nucleophile was I- > SCN- > Br- > Cl-, an order linked to their polarizability and the softness or hardness of the metal. Activation parameters were determined for all reactions and the negative entropies of activation (Delta S++) support an associative ligand substitution mechanism. The X-ray crystal structure of [Pd(bpma)(py)](ClO4)2 was determined; it belongs to the triclinic space group P1 and has one formula unit in the unit cell. The unit cell dimensions are a = 8.522(2), b = 8.627(2), c = 16.730(4) A; alpha = 89.20(2), beta = 81.03(2), gamma = 60.61(2) degrees ; V = 1055.7(5) A3. The structure was solved using direct methods in WinGX's implementation of SHELXS-97 and refined to R = 0.054. The coordination geometry of [Pd(bpma)(py)]2+ is distorted square-planar. The Pd-N(central) bond distance, 1.996(3) A, is shorter than the other two Pd-N distances, 2.017(3) and 2.019(3) A. The Pd-N(pyridine) distance is 2.037(3) A.     

Effect of pH on H2O2 production in the radiolysis of water

The yields of hydrogen peroxide have been measured in the radiolysis of aqueous solutions of acrylamide, bromide, nitrate, and air in the pH range of 1-13. Hydrogen peroxide is the main stable oxidizing species formed in the radiolysis of water, and its long-term yield is found to be very sensitive to the system used in the measurements. Experiments with γ-irradiation combined with model calculations show that the primary yields of hydrogen peroxide are nearly independent of pH in the range of 2-12. Slightly higher primary yields are suggested at very low pH in particular when O(2) is present, while the yields seem to decrease at very high pH. Irradiations were performed with 5 MeV H ions, 5 MeV He ions, and 10 MeV C ions to evaluate the intratrack and homogeneous kinetic contributions to H(2)O(2) formation with different ions. Many of the trends in hydrogen peroxide yields with pH observed with γ-irradiations are observed with irradiation by the heavy ions. The lower yields of radicals in the homogeneous phase with the heavier ions tend to minimize the effects of radicals on the hydrogen peroxide yields at long times.     

Kinetic and mechanistic investigations of multielectron transfer reactions induced by stored electrons in TiO2 nanoparticles: a stopped flow study

The kinetics and the mechanism of various multielectron transfer reactions initiated by stored electrons in TiO(2) nanoparticles have been investigated employing the stopped flow technique. Moreover, the optical properties of the stored electrons in the TiO(2) nanoparticles have been studied in detail following the UV (A) photolysis of deaerated aqueous suspensions of TiO(2) nanoparticles in the presence of methanol. The reduction of common electron acceptors that are often present in photocatalytic systems such as O(2), H(2)O(2), and NO(3)(-) has been investigated. The experimental results clearly show that the stored electrons reduce O(2) and H(2)O(2) to water by multielectron transfer processes. Moreover, NO(3)(-) is reduced via the transfer of eight electrons evincing the formation of ammonia. On the other hand, the reduction of toxic metal ions, such as Cu(II), has been studied mixing their respective anoxic aqueous solutions with those containing the electrons stored in the TiO(2) particles. A two-electron transfer is found to occur, indicating the reduction of the copper metal ion into its non toxic metallic form. Other metal ions, such as Zn(II) and Mn(II), could not be reduced by TiO(2) electrons, which is readily explained on the bases of their respective redox potentials. The underlying reaction mechanisms are discussed in detail.     

Cyclization reactions of acylium and thioacylium ions with isocyanates and isothiocyanates: Gas phase synthesis of 3,4-dihydro-2,4-dioxo-2H-1,3,5-oxadiazinium ions

Gas-phase reactions of several acylium and thioacylium ions, that is H2C=N-C+=O, H2C=N-C+=S, O=C=N-C+=O, S=C=N-C+=O, H3C-C+=O, and (CH3)2N-C+=O, with both a model isocyanate and isothiocyanate, that is, C2H5-N=C=O and C2H5-N=C=S, were investigated using tandem-in-space pentaquadrupole mass spectrometry. In these reactions, the formation of mono- and double-addition products is observed concurrently with proton transfer products. The double-addition products are far more favored in reactions with ethyl isocyanate, whereas the reactions with ethyl isothiocyanate form, preferentially, either the mono-addition product or proton transfer products, or both. Retro-addition dominates the low-energy collision-induced dissociation of the mono- and double-addition products with reformation of the corresponding reactant ions. Ab initio calculations at Becke3LYP//6-311 + G(d,p) level indicate that cyclization is favored for the double-addition products and that products equivalent to those synthesized in solution, that is, of 3,4-dihydro-2,4-dioxo-2H-1,3,5-oxadiazinium ions and sulfur analogs, are formed.     

An investigation of the reactions of H3O+ and O2+ with NO, NO2, N2O and HNO2 in support of selected ion flow tube mass spectrometry

A selected ion flow tube (SIFT) experimental investigation has been carried out of the reactions of H3O+, NO+ and O2+ with NO, NO2, N2O and HNO2, in order to obtain the essential kinetic data for the analyses of these compounds in air using selected ion flow tube mass spectrometry (SIFT-MS). These investigations show that NO+ ions do not react at a significant rate with any of these NOx compounds and that H3O+ ions react only with HNO2 (product ions H2NO2+ (75%) and NO+ (25%)). O2+ ions react with NO (product ion NO+), NO2 (product ion NO2+) and HNO2 (product ions NO+ (75%), NO2+ (25%)), but not with N2O. We conclude that both NO and NO2 can be accurately quantified in air using only O2+ precursor ions and SIFT-MS when HNO2 is not present. However, when HNO2 is present it invariably co-exists with both NO and NO2 and then both H3O+ and O2+ precursor ions are needed to determine the partial pressures of NO, NO2 and HNO2 in the air mixture. We also conclude that currently N2O cannot be analysed in air using SIFT-MS.     

O2气中激光烧蚀Ta2O5产物离子的氧化反应

Ta2O5薄膜作为电容元件材料的替代品已在微电子等领域中显示出广阔的应用前景[1]．脉冲激光沉积（PLD）法制备Ta2O5薄膜以其显著的优点引起了广泛重视[2，3]．而对激光烧蚀的物理化学过程的认识是完善这一方法的重要前提．我们曾采用时间分辨与角分辨飞行四极质谱[4]和发光光谱技术[5]较系统地研究了激光烧蚀Ta2O5产生的羽状物的组成和特征，并认为在O2气氛中沉积Ta2O5薄膜可以改善甚至避免形成缺氧的薄膜．但由于上述实验方法上的限制，未能详细考察激光烧蚀Ta2O5生成的离子产物在O2气氛中发生的氧化反应．为了研究激光烧蚀产物离子…     

Absolute rate coefficients and branching percentages for the reactions of POxCly- + N (4S(3/2)) and POxCly- + O (3P) at 298 K in a selected-ion flow tube instrument

The absolute rate coefficients and product ion branching percentages at 298 K for the reactions of several POxCly- species with atomic nitrogen (N (4S(3/2))) and atomic oxygen (O (3P)) have been determined in a selected-ion flow tube (SIFT) instrument. POxCly- ions are generated by electron impact on POCl3 in a high-pressure source. O atoms are generated by quantitative titration of N atoms with NO, where N atoms are produced by microwave discharge on N2. The experimental procedure allows for the determination of rate coefficients for the reaction of the reactant ion with N (4S(3/2)) and O (3P) as well as with N2 and NO. None of the ions react with N2 or NO, giving an upper limit to the rate coefficient of <5 x 10(-12) cm3 molecules(-1) s(-1). POCl3- and POCl2- do not react with N atoms, giving an upper limit to the rate coefficient of <1 x 10(-11) cm3 molecules(-1) s(-1). The major product ion for POCl3- and POCl2- reacting with O involves loss of Cl from the reactant ion, accounting for >85% of the products. PO2- is a minor product (相似文献   

Ester hydrolysis and enol nitrosation reactions of ethyl cyclohexanone-2-carboxylate inhibited by beta-cyclodextrin

Both the ester hydrolysis and the nitrosation reactions of the enol tautomer of ethyl cyclohexanone-2-carboxylate (ECHC) are investigated in the absence and presence of beta-cyclodextrin (beta-CD). The ester hydrolysis reaction is studied in dilute H2O and D2O solutions of hydrochloric acid and in aqueous buffered solutions of carboxylic acids (acetic acid and its chloro derivatives). The pseudo-first-order rate constant increases with both the [H+] and the total buffer concentration, indicating that the hydrolysis is subject to acid and general base catalysis. Substantial solvent isotope effects in the normal direction (kH/kD > 1) for the acid-catalyzed hydrolysis was observed. Addition of beta-CD strongly slows the hydrolysis reaction. The variation of the observed rate constant (k(o)) with [beta-CD] exhibits saturation behavior, consistent with 1:1 binding between the enol of ECHC and beta-CD. The binding is quite strong, and bound ECHC-enol is unreactive. The nitrosation reaction of ECHC in aqueous acid medium, using sodium nitrite in great excess over the concentration of ECHC, yields perfect first-order kinetics, indicating that the slow step is the nitrosation of the enol tautomer. This finding suggests that a great percentage of the total ECHC concentration must exist in the enol form. The nitrosation reaction is of first order in [nitrite] and is catalyzed by the presence of Cl-, Br-, or SCN- ions, which indicates that the attack of the nitrosating agent is the slow step. The nitrosation reaction is also strongly inhibited by the presence of beta-CD because of the formation of unreactive inclusion complexes between the host, beta-CD, and the guest, the enol of ECHC. In alkaline medium, the formation of the enolate ion is observed, which absorbs at higher wavelengths (lambda(max) = 256 nm in acid medium shifts to lambda(max) = 288 nm in alkaline medium). This anion also undergoes ester hydrolysis spontaneously, but shows neither specific basic catalysis nor appreciable effect by the presence of beta-CD. From kinetic and spectroscopic measurements the pKa of the enol of ECHC has been determined as 12.35.     

Enhanced surface photochemistry in chloride-nitrate ion mixtures

Heterogeneous reactions of sea salt aerosol with various oxides of nitrogen lead to replacement of chloride ion by nitrate ion. Studies of the photochemistry of a model system were carried out using deliquesced mixtures of NaCl and NaNO3 on a Teflon substrate. Varying molar ratios of NaCl to NaNO3 (1 : 9 Cl- : NO3-, 1 : 1 Cl- : NO3-, 3 : 1 Cl- : NO3-, 9 : 1 Cl- : NO3-) and NaNO3 at the same total concentration were irradiated in air at 299 +/- 3 K and at a relative humidity of 75 +/- 8% using broadband UVB light (270-380 nm). Gaseous NO2 production was measured as a function of time using a chemiluminescence NO(y) detector. Surprisingly, an enhanced yield of NO2 was observed as the chloride to nitrate ratio increased. Molecular dynamics (MD) simulations show that as the Cl- : NO3- ratio increases, the nitrate ions are drawn closer to the interface due to the existence of a double layer of interfacial Cl- and subsurface Na+. This leads to a decreased solvent cage effect when the nitrate ion photodissociates to NO2+O*-, increasing the effective quantum yield and hence the production of gaseous NO2. The implications of enhanced NO2 and likely OH production as sea salt aerosols become processed in the atmosphere are discussed.     

Kinetics of dissociation of molecular oxygen from a superoxorhodium(III) complex and reactivity of a macrocyclic rhodium(II) ion

The kinetics of disappearance of the superoxorhodium complex L2(H2O)RhOO2+ (L2 = meso-hexamethylcyclam) were determined in the presence of several oxidants (H2O2, (NH3)5CoBr2+, and IrCl62-) in both air-free and air-saturated aqueous solutions. Under air-free conditions, the reaction obeyed first-order kinetics. After the correction for the appropriate stoichiometric factors, the value of the rate constant kh was the same irrespective of the oxidant, kh = 2.18 (+/-0.37) x 10(-4) s(-1) at 25.0 degrees C in acidic solutions. The disappearance of L2(H2O)RhOO2+ was slower in the presence of O2. All the data suggest a sequence of reactions beginning with homolytic dissociation of O2 from L2(H2O)RhOO2+, followed by capture of the newly generated L2(H2O)Rh2+ by added oxidants in competition with O2. The equilibrium constant for O2 binding by L2(H2O)Rh2+ is 109-fold greater than that for the cobalt analogue. This difference is attributed to the lower reduction potential of the rhodium complex.     

Interaction of Al2O3 and CeO2 surfaces with SO2 and SO2 + O2 studied by X-ray photoelectron spectroscopy

The interaction of Al2O3 and CeO2 thin films with sulfur dioxide (2.5 mbar) or with mixtures of SO2 with O2 (5 mbar) at various temperatures (30-400 degrees C) was studied by X-ray photoelectron spectroscopy (XPS). The analysis of temperature-induced transformations of S2p spectra allowed us to identify sulfite and sulfate species and determine the conditions of their formation on the oxide surfaces. Sulfite ions, SO3(2-), which are characterized by the S2p(3/2) binding energy (BE) of approximately 167.5 eV, were shown to be formed during the interaction of the oxide films with pure SO2 at temperatures < or =200 degrees C, whereas sulfate ions, SO4(2-), with BE (S2p(3/2)) approximately 169 eV were produced at temperatures > or =300 degrees C. The formation of both the sulfite and sulfate species proceeds more efficiently in the case of CeO2. The addition of oxygen to SO2 suppresses the formation of the sulfite species on both oxides and facilitates the formation of the sulfate species. Again, this enhancement is more significant for the CeO2 film than for the Al2O3 one. The sulfation of the CeO2 film is accompanied by a reduction of Ce(IV) ions to Ce(III) ones, both in the absence and in the presence of oxygen. It has been concluded that the amount of the sulfates on the CeO2 surface treated with the SO2 + O2 mixture at > or =300 degrees C corresponds to the formation of a 3D phase of the Ce(III) sulfate. The sulfation of Al2O3 is limited by the surface of the oxide film.     

Atmospheric pressure chemical ionization of fluorinated phenols in atmospheric pressure chemical ionization mass spectrometry, tandem mass spectrometry, and ion mobility spectrometry

Atmospheric pressure chemical ionization (APCI)-mass spectrometry (MS) for fluorinated phenols (C6H5-xFxOH Where x = 0-5) in nitrogen with Cl- as the reagent ion yielded product ions of M Cl- through ion associations or (M-H)- through proton abstractions. Proton abstraction was controllable by potentials on the orifice and first lens, suggesting that some proton abstraction occurs through collision induced dissociation (CID) in the interface region. This was proven using CID of adduct ions (M Cl-) with Q2 studies where adduct ions were dissociated to Cl- or proton abstracted to (M-H)-. The extent of proton abstraction depended upon ion energy and structure in order of calculated acidities: pentafluorophenol > tetrafluorophenol > trifluorophenol > difluorophenol. Little or no proton abstraction occurred for fluorophenol, phenol, or benzyl alcohol analogs. Ion mobility spectrometry was used to determine if proton abstraction reactions passed through an adduct intermediate with thermalized ions and mobility spectra for all chemicals were obtained from 25 to 200 degrees C. Proton abstraction from M Cl- was not observed at any temperature for phenol, monofluorophenol, or difluorophenol. Mobility spectra for trifluorophenol revealed the kinetic transformations to (M-H)- either from M Cl- or from M2 Cl- directly. Proton abstraction was the predominant reaction for tetra- and penta-fluorophenols. Consequently, the evidence suggests that proton abstraction occurs from an adduct ion where the reaction barrier is reduced with increasing acidity of the O-H bond in C6H5-xFxOH.     

Reactions of POxCly- ions with H and H2 from 298 to 500 K

Rate constants and product branching ratios for POxCly- ions reacting with H and H2 were measured in a selected ion flow tube (SIFT) from 298 to 500 K. PO2Cl-, PO2Cl2-, POCl2-, and POCl3- were all unreactive with H2, having a rate constant with an upper limit of <5 x 10(-12) cm3 s(-1). PO2Cl2- did not react with H atoms either, having a similar rate constant limit of <5 x 10(-12) cm3 s(-1). The rate constants for PO2Cl-, POCl2-, and POCl3- reacting with H showed no temperature dependence over the limited range of 298-500 K and were approximately 10-20% of the collision rate constant. Cl abstraction by H to form HCl was the predominant product channel for PO2Cl-, POCl2-, and POCl3-, with a small amount of Cl- observed from POCl2- + H. Reactions of O2 and O3 with the POCl- products ions from the reaction of POCl2- + H were observed to yield predominantly PO3- and PO2-, respectively. POCl- reacted with O2 and O3 with rate constants of 8.9 +/- 1.1 x 10(-11) and 5.2 +/- 3.3 x 10(-10) cm3 s(-1), respectively. No associative electron detachment in the reactions with H atoms was observed with any of the reactant ions; however, detachment was observed with a PO- secondary product ion at high H atom concentrations. Results of new G3 theoretical calculations of optimized geometries and energies for the products observed are discussed.     

Alkene cis-dihydroxylation by [(Me3tacn)(CF3CO2)RuVI O2)]ClO4(Me(3)tacn = 1,4,7-Trimethyl-1,4,7-triazacyclononane): structural characterization of [3 + 2] cycloadducts and kinetic studies

cis-Dioxoruthenium(VI) complex [(Me(3)tacn)(CF(3)CO(2))Ru(VI)O(2)]ClO(4) (1, Me(3)tacn = 1,4,7-trimethyl-1,4,7-triazacyclononane) reacted with alkenes in aqueous tert-butyl alcohol to afford cis-1,2-diols in excellent yields under ambient conditions. When the reactions of 1 with alkenes were conducted in acetonitrile, oxidative C=C cleavage reaction prevailed giving carbonyl products in >90% yields without any cis-diol formation. The alkene cis-dihydroxylation and C=C cleavage reactions proceed via the formation of a [3 + 2] cycloadduct between 1 and alkenes, analogous to the related reactions with alkynes [Che et al. J. Am. Chem. Soc. 2000, 122, 11380]. With cyclooctene and trans-beta-methylstyrene as substrates, the Ru(III) cycloadducts (4a) and (4b) [formula; see text] were isolated and structurally characterized by X-ray crystal analyses. The kinetics of the reactions of 1 with a series of p-substituted styrenes has been studied in acetonitrile by stopped-flow spectrophotometry. The second-order rate constants varied by 14-fold despite an overall span of 1.3 V for the one-electron oxidation potentials of alkenes. Secondary kinetic isotope effect (KIE) was observed for the oxidation of beta-d(2)-styrene (k(H)/k(D) = 0.83 +/- 0.04) and alpha-deuteriostyrene (k(H)/k(D) = 0.96 +/- 0.03), which, together with the stereoselectivity of cis-alkene oxidation by 1, is in favor of a concerted mechanism.     

Optical properties and valence change of europium ions in a sol-gel Al2O3-B2O3-SiO2 glass by femtosecond laser pulses

The Al2O3-B2O3-SiO2 glass containing europium ions was prepared by a sol-gel method. Fluorescence line-narrowing spectra (FLN) indicate two different environments of the Eu 3+ ions. The calculated second crystal-field parameters exhibit the opposite behaviors of the two different environments. The FLN excitation and emission spectra before and after irradiation show that the change of the emission mainly comes from the Eu 3+ ions at site I, revealing that the concentration ratio of the Eu 3+ ions at site I to site II was decreased. The emission spectra confirmed that some Eu 3+ ions were reduced into Eu 2+ ions. The excitation spectra indicate that the Eu 3+ ions at the sites with higher covalence degree can be easily reduced, implying that the Eu 3+ ions are more easily reduced at site I than at site II. The absorption spectra before and after irradiation exhibit that the absorption of Eu 2+ ions increases and that the positive hole centers appear. These results suggest a mechanism of the formation of the Eu 2+ ions by femtosecond laser irradiation.     

潮湿空气微波放电离子形成动力学

利用微波放电电离质谱装置，通过水蒸气与空气混合气体（潮湿空气）的微波放电，同时获得了化学电离质谱探测技术中常用的三种重要母体离子H3O＋、NO＋和.结合潮湿空气中主要成分N2、O2以及水蒸气各自微波放电后的质谱探测结果，对潮湿空气微波放电后上述三种离子产生的动力学过程进行了分析，并给出了各种离子的形成机制.这些离子 分子反应过程在计算机模拟中得到了进一步的证实.     

Formation mechanism of nanostructured Ag films from Ag2O particles using a sonoprocess

Nanostructured Ag films composed of nanoparticles and nanorods can be formed by the ultrasonication of ethanol solutions containing Ag₂O particles. The present work examined the formation process of these films from ethanol solutions by two different agitation methods, including ultrasonication and mechanical stirring. The mass-transfer process from Ag₂O particles to ethanol solvent is accelerated by the mechanical effects of ultrasound. Ag⁺ ions and intermediately reduced Ag clusters were released into the ethanol. These Ag⁺ ions and Ag clusters provide absorption bands at 210, 275 and 300 nm in UV-vis spectra. These bands were assigned to the absorption of Ag⁺, Ag ₄ ²⁺ and Ag_n (n?≈?3). The Ag_n clusters that readily grow to become Ag nanoparticles were formed due to the surface reaction of Ag₂O particles with ethanol under ultrasonication. The reactions of Ag⁺ ions in ethanol to form Ag nanomaterials (through the formation of Ag ₄ ²⁺ clusters) were also accelerated by ultrasonication.     

Influence of water vapour on selected ion flow tube mass spectrometric analyses of trace gases in humid air and breath

Selected ion flow tube mass spectrometry (SIFT-MS) detects and quantifies in real time the trace gases, M, in air/breath samples introduced directly into a flow tube. Inevitably, relatively large partial pressures of water vapour are introduced with the sample and the water molecules become involved in the ion chemistry on which this analytical technique depends. When H(3)O(+) ions are used as the precursors for chemical ionisation and SIFT mass spectrometric analyses of M, they generally result in the formation of MH(+) ions. Also, when water vapour is present the H(3)O(+) ions are partially converted to hydrated hydronium ions, H(3)O(+).(H(2)O)(1,2,3). The latter may act as precursor ions and produce new product ions like MH(+).(H(2)O)(1,2,3) via ligand switching and association reactions. This ion chemistry and the product ions that result from it must be accounted for in accurate analyses by SIFT-MS. In this paper we describe the results of a detailed SIFT study of the reactions involved in the quantification of acetone, ethyl acetate, diethyl ether, methanol, ethanol, ammonia and methyl cyanide by SIFT-MS in the presence of water vapour. This study was undertaken to provide the essential data that allows more accurate analyses of moist air and breath by SIFT-MS to be achieved. It is shown using our standard analysis procedure that the error of SIFT-MS quantification caused by the presence of water vapour is typically 15%. An improved analysis procedure is then presented that is shown to reduce this error to typically 2%. Additionally, some fundamental data have been obtained on the association reactions of protonated organic molecules, MH(+) ions, with water molecules forming MH(+).H(2)O monohydrate ions. For some types of M, reaction sequences occur that lead to the formation of dihydrate and trihydrate ions.