A first-principles study of methanol decomposition on Pt(111)

A periodic, self-consistent, Density Functional Theory study of methanol decomposition on Pt(111) is presented. The thermochemistry and activation energy barriers for all the elementary steps, starting with O[bond]H scission and proceeding via sequential hydrogen abstraction from the resulting methoxy intermediate, are presented here. The minimum energy path is represented by a one-dimensional potential energy surface connecting methanol with its final decomposition products, CO and hydrogen gas. It is found that the rate-limiting step for this decomposition pathway is the abstraction of hydroxyl hydrogen from methanol. CO is clearly identified as a strong thermodynamic sink in the reaction pathway while the methoxy, formaldehyde, and formyl intermediates are found to have low barriers to decomposition, leading to very short lifetimes for these intermediates. Stable intermediates and transition states are found to obey gas-phase coordination and bond order rules on the Pt(111) surface.     

Experimental and theoretical study of reactivity trends for methanol on Co/Pt(111) and Ni/Pt(111) bimetallic surfaces

Methanol was used as a probe molecule to examine the reforming activity of oxygenates on NiPt(111) and CoPt(111) bimetallic surfaces, utilizing density functional theory (DFT) modeling, temperature-programmed desorption, and high-resolution electron energy loss spectroscopy (HREELS). DFT results revealed a correlation between the methanol and methoxy binding energies and the surface d-band center of various NiPt(111) and CoPt(111) bimetallic surfaces. Consistent with DFT predictions, increased production of H2 and CO from methanol was observed on a Ni surface monolayer on Pt(111), designated as Ni-Pt-Pt(111), as compared to the subsurface monolayer Pt-Ni-Pt(111) surface. HREELS was used to verify the presence and subsequent decomposition of methoxy intermediates on NiPt(111) and CoPt(111) bimetallic surfaces. On Ni-Pt-Pt(111) the methoxy species decomposed to a formaldehyde intermediate below 300 K; this species reacted at approximately 300 K to form CO and H2. On Co-Pt-Pt(111), methoxy was stable up to approximately 350 K and decomposed to form CO and H2. Overall, trends in methanol reactivity on NiPt(111) bimetallic surfaces were similar to those previously determined for ethanol and ethylene glycol.     

Thermal and electron-induced decomposition of 2-butanol on Pt(111)

The adsorption, thermal evolution, and electron irradiation of 2-butanol on Pt(111) were investigated with reflection absorption infrared spectroscopy (RAIRS). A simulated vibrational spectrum of a single 2-butanol molecule was calculated using density functional theory to facilitate vibrational assignments. Exposures of 0.2 Langmuir (L) and lower result in both isolated 2-butanol molecules with minimal lateral interactions and hydrogen-bonded clusters. The thermal evolution following a 4.0 L exposure shows that the hydrogen-bonded multilayer desorbs around 170 K, leaving a 2-butanol monolayer where hydrogen bonding still exists. At 190 K, a new feature at 1699 cm(-1) is attributed to the formation of butanone. Irradiation with 750 or 100 eV electrons leads to 2-butanol desorption and partial conversion to butanone, as indicated by the appearance of a peak at 1709 cm(-1).     

Kinetic study of hydrogen sulfide decomposition on Pt(111) surface

In this work, kinetic of H₂S conversion to H₂ molecule on the surface of Pt(111) is studied using kinetic Monte Carlo simulation. The results of simulation were fitted to the experimental temperature-programed desorption spectra. The good agreement between the empirical and the simulated data confirms the proposed mechanism and kinetic data (activated energies and pre-exponential factors). The influence of variables such as temperature and concentrations of H₂S and H₂ on the overall results of hydrogen production is studied. The condition is proposed in which the best yield of reaction at minimum temperature is obtained. Results show that platinum is a perfect catalyst for converting H₂S to H₂ and it has a perfect performance (98%) after 5 μs at low temperature of 227°C.     

NO Chemisorption on Pt(111), Rh/Pt(111), and Pd/Pt(111)

The chemisorption of NO on clean Pt(111), Rh/Pt(111) alloy, and Pd/Pt(111) alloy surfaces has been studied by first principles density functional theory (DFT) computations. It was found that the surface compositions of the surface alloys have very different effects on the adsorption of NO on Rh/Pt(111) versus that on Pd/Pt(111). This is due to the different bond strength between the two metals in each alloy system. A complex d-band center weighting model developed by authors in a previous study for SO2 adsorption is demonstrated to be necessary for quantifying NO adsorption on Pd/Pt(111). A strong linear relationship between the weighted positions of the d states of the surfaces and the molecular NO adsorption energies shows the closer the weighted d-band center is shifted to the Fermi energy level, the stronger the adsorption of NO will be. The consequences of this study for the optimized design of three-way automotive catalysts, (TWC) are also discussed.     

Electrocatalytic oxidation of formic acid and methanol on Pt deposits on Au(111)

This work presents characteristics of Pt deposits on Au(111) obtained by the use of spontaneous deposition and investigated by electrochemical scanning tunneling microscopy (EC-STM). On such prepared and STM characterized Au(111)/Pt surfaces, we studied electrocatalytic oxidation of formic acid and methanol. We show that the first monatomic layer of Pt displays a (square root 3 x square root 3)R30 degrees surface structure, while the second layer is (1 x 1). After prolonged deposition, multilayer Pt deposits are formed selectively on Au(111) surface steps and are 1-20 nm wide and one to five layers thick. On the optimized Au(111)/Pt surface, formic acid oxidation rates are enhanced by a factor of 20 compared to those of pure Pt(111). The (square root 3 x square root 3)R30 degrees-Pt yields very low methanol oxidation rates, but the rates increase significantly with further Pt growth.     

Kinetic mechanism of methanol decomposition on Ni(111) surface: a theoretical study

The decomposition of methanol on the Ni(111) surface has been studied with the pseudopotential method of density functional theory-generalized gradient approximation (DFT-GGA) and with the repeated slab models. The adsorption energies of possible species and the activation energy barriers of the possible elementary reactions involved are obtained in the present work. The major reaction path on Ni surfaces involves the O-H bond breaking in CH(3)OH and the further decomposition of the resulting methoxy species to CO and H via stepwise hydrogen abstractions from CH(3)O. The abstraction of hydrogen from methoxy itself is the rate-limiting step. We also confirm that the C-O and C-H bond-breaking paths, which lead to the formation of surface methyl and hydroxyl and hydroxymethyl and atom hydrogen, respectively, have higher energy barriers. Therefore, the final products are the adsorbed CO and H atom.     

Preoxidation of CO on Os-modified Pt(111): a comparison with Ru-modified Pt(111)

The variation in CO adsorption structures during the preoxidation of CO on Os-modified Pt(111) (Pt(111)/Os) was investigated using cyclic voltammetry and electrochemical scanning tunneling microscopy. The spontaneous deposition of Os on Pt(111) resulted in randomly scattered islands with a coverage range of 0.13-0.54. During preoxidation on Pt(111)/Os, a phase transition from (2 × 2)-α to (√19 × √19) via the transient structures of (2 × 2)-β and (1 × 1) took place as on unmodified Pt(111). As the amount of Os increased, however, the transient structures of (2 × 2)-β and (1 × 1) appeared at lower potentials with higher populations. When the population of the transient structures was greater than 50%, an oxidative CO stripping process took place to the structure of (√19 × √19), completing the preoxidation. These observations strongly support the idea that the presence of Os increases the mobility of adsorbed CO by electronic modification of the Pt(111) surface (electronic effect). In addition, the results obtained with Pt(111)/Os were compared with those of Pt(111)/Ru.     

Examination of Pt(111)/Ru and Pt(111)/Os surfaces: STM imaging and methanol oxidation activity

Ruthenium and osmium were deposited in submonolayer amounts on Pt(111) single crystal surfaces using the previously reported ‘spontaneous deposition’ procedure [Chrzanowski et al., Langmuir, 13 (1997) 5974]. Such surfaces were first explored using ex situ scanning tunneling microscopy (STM) to image the deposition characteristics of ruthenium and osmium islands on Pt(111). It was found that, using the spontaneous deposition procedure, a maximum coverage of 0.20 ML ruthenium is formed on the surface after 120 s of exposure to a RuCl₃ solution in 0.1 M HClO₄. A homogeneous deposition on the Pt(111) surface was found, with no observed preferential deposition on step edges or surface defect sites. In contrast, in the spontaneous deposition of osmium, osmium clusters form preferentially at, though not limited to, surface defect sites and step edges. Osmium island deposition occurs at a greater rate than ruthenium on Pt(111), and possible explanations are presented. Methanol activity on the Pt(111)/Ru and Pt(111)/Os surfaces is also studied, using the coverage values determined to yield the highest activity for methanol electro-oxidation (0.20 ML coverage for Ru and 0.15 ML for Os). At potentials more negative than 0.40 V vs. RHE, the Pt(111)/Ru surface yields a higher surface activity than Pt(111)/Os. However, at potentials more positive than 0.04 V, Pt(111)/Os exhibits demonstrably higher surface activity. The relevance of this data is discussed and future avenues of interest are indicated.     

CO and methanol adsorption on (2 × 1)Pt(110) and ion‐eroded Pt(111) model catalysts

Methanol adsorption on ion‐sputtered Pt(111) surface exhibiting high concentration of vacancy islands and on (2 × 1)Pt(110) single crystal were investigated by means of photoelectron spectroscopy (PES) and thermal desorption spectroscopy. The measurements showed that methanol adsorbed at low temperature on sputtered Pt(111) and on (2 × 1)Pt(110) surfaces decomposed upon heating. The PES data of methanol adsorption were compared to the data of CO adsorbed on the same Pt single crystal surfaces. In the case of the sputtered Pt(111) surface, the dehydrogenation of H_xCO intermediates is followed by the CO bond breakage. On the (2 × 1)Pt(110) surface, carbon monoxide, as product of methanol decomposition, desorbed molecularly without appearance of any traces of atomic carbon. By comparing both platinum surfaces we conclude that methanol decomposition occurs at higher temperature on sputtered Pt(111) than on (2 × 1)Pt(110). Copyright © 2010 John Wiley & Sons, Ltd.     

An EELS and TDS study of molecular oxygen desorption and decomposition on Pt(111)

Correlation of EEL and TD spectra for the adsorption of O₂ on Pt(111) at <100 K has identified the respective roles of the two molecularly adsorbed states in the apparently competing processes of desorption and dissociation.     

CO preoxidation on Ru-modified Pt(111)

Electrochemical scanning tunneling microscopy was used to study the structural evolution of adsorbed CO during preoxidation on Pt(111) modified with spontaneously deposited Ru. During the preoxidation process, a phase transition was observed from (2 × 2)-3CO-α to (√19 × √19)R23.4°-13CO via the transient structures (2 × 2)-3CO-β and (1 × 1)-CO. A comparison of these structural changes with those that occur on unmodified Pt(111) revealed that the presence of Ru resulted in higher populations of transient structures at lower potentials and a cathodic shift in the potential at which preoxidation is complete. These observations are discussed in terms of increased mobility of adsorbed CO in the presence of Ru.     

Molecular dynamics simulations of surface oxide-water interactions on Pt(111) and Pt/PtCo/Pt3Co(111)

Classical molecular dynamics simulations of the interactions of water with oxidized Pt(111) and Pt/PtCo/Pt(3)Co(111) surfaces are performed by modeling water with the CF1 central force model that allows molecular dissociation and therefore the presence of other intermediates of the oxygen reduction reaction different from atomic oxygen. It is found that the water-surface oxide interactions do not affect the overall structure of the catalyst represented by an extended periodic slab. However, such interactions are affected by changes in the electrochemical potential which are simulated by higher values of the surface and atomic oxygen charges at increased oxygen coverage. Thus, electrochemical potential as well as the presence of protons and anions products of acid dissociation define the identity and the amount of oxygen reduction reaction intermediates such as OH or H(3)O. We observe agglomerations of water molecules over regions of the surface and the presence of OH and H(3)O in their vicinity. Our simulation model is able to qualitatively reproduce features of the degradation of the catalyst surface after oxidation and reduction cycles.     

n-alkanes on Pt(111) and on C(0001)Pt(111): chain length dependence of kinetic desorption parameters

We have measured the desorption of seven small n-alkanes (C(N)H(2N+2), N=1-4,6,8,10) from the Pt(111) and C(0001) surfaces by temperature programed desorption. We compare these results to our recent study of the desorption kinetics of these molecules on MgO(100) [J. Chem. Phys. 122, 164708 (2005)]. There we showed an increase in the desorption preexponential factor by several orders of magnitude with increasing n-alkane chain length and a linear desorption energy scaling with a small y-intercept value. We suggest that the significant increase in desorption prefactor with chain length is not particular to the MgO(100) surface, but is a general effect for desorption of the small n-alkanes. This argument is supported by statistical mechanical arguments for the increase in the entropy gain of the molecules upon desorption. In this work, we demonstrate that this hypothesis holds true on both a metal surface and a graphite surface. We observe an increase in prefactor by five orders of magnitude over the range of n-alkane chain lengths studied here. On each surface, the desorption energies of the n-alkanes are found to increase linearly with the molecule chain length and have a small y-intercept value. Prior results of other groups have yielded a linear desorption energy scaling with chain length that has unphysically large y-intercept values. We demonstrate that by allowing the prefactor to increase according to our model, a reanalysis of their data resolves this y-intercept problem to some degree.     

Electrocatalytic oxidation of ammonia on Pt(111) and Pt(100) surfaces

The electrocatalytic oxidation of ammonia on Pt(111) and Pt(100) has been studied using voltammetry, chronoamperometry, and in situ infrared spectroscopy. The oxidative adsorption of ammonia results in the formation of NH(x) (x = 0-2) adsorbates. On Pt(111), ammonia oxidation occurs in the double-layer region and results in the formation of NH and, possibly, N adsorbates. The experimental current transients show a hyperbolic decay (t(-1)), which indicates strong lateral (repulsive) interactions between the (reacting) species. On Pt(100), the NH(2) adsorbed species is the stable intermediate of ammonia oxidation. Stabilization of the NH and NH(2) fragments on Pt(111) and Pt(100), respectively, is in an interesting agreement with recent theoretical predictions. The Pt(111) surface shows extremely low activity in ammonia oxidation to dinitrogen, thus indicating that neither NH nor N (strongly) adsorbed species are active in dinitrogen production. Neither nitrous oxide nor nitric oxide is the product of ammonia oxidation on Pt(111) at potentials up to 0.9 V, as deduced from the in situ infrared spectroscopy measurements. The Pt(100) surface is highly active in dinitrogen production. This process is characterized by a Tafel slope of 30 mV decade(-1), which is explained by a rate-determining dimerization of NH(2) fragments followed by a fast decay of the resulting surface-bound hydrazine to dinitrogen. Therefore, the high activity of the Pt(100) surface for ammonia oxidation to dinitrogen is likely to be related to its ability to stabilize the NH(2) adsorbate.     

Transition state for alkyl group hydrogenation on Pt(111)

Substituent effects have been used to probe the characteristics of the transition state to hydrogenation of alkyl groups on the Pt(111) surface. Eight different alkyl and fluoroalkyl groups have been formed on the Pt(111) surface by dissociative adsorption of their respective alkyl and fluoroalkyl iodides. Coadsorption of hydrogen and alkyl groups, followed by heating of the surface, results in hydrogenation of the alkyl groups to form alkanes, which then desorb into the gas phase. Temperature-programmed reaction spectroscopy was used to measure the barriers to hydrogenation, DeltaE(H)(double dagger), which are dependent on the size of the alkyl group (polarizability) and the degree of fluorination (field effect). This example is one of only two surface reactions for which the influence of the substituents on DeltaE(H)(double dagger) has been correlated with both the field and the polarizability substituent constants of the alkyl groups in the form of a linear free energy relationship. Increasing both the field and the polarizability constants of the alkyl groups increases the value of DeltaE(H)(double dagger). The substituent effects are quantified by a field reaction constant of rho(F) = 27 +/- 4 kJ/mol and a polarizability reaction constant of rho(alpha) = 19 +/- 3 kJ/mol. These suggest that the transition state for hydrogenation is slightly cationic with respect to the alkyl group on the Pt(111) surface, RC + H <--> {RC(delta+)...H}(double dagger).     

Hydrogen-bonded assembly of methanol on Cu(111)

Investigation of methanol's surface chemistry on metals is a crucial step towards understanding the reactivity of this important chemical feedstock. Cu is a relevant metal for methanol synthesis and reforming, but due to the weak interaction of methanol with Cu, an atomic scale view of methanol's coverage-dependent ordering and self-assembly on Cu(111), the most abundant facet of most nanoparticles, has not yet been possible. Low and variable temperature scanning tunneling microscopy coupled with density functional theory reveal a coverage-dependent range of highly ordered structures stabilized by two hydrogen bonds per molecule. While extended chains that resemble the hydrogen-bonded zigzag structures reported for solid methanol are an efficient way to pack methanol at higher coverages, lower surface coverages yield isolated hexamer units. These hexamers form the same number of hydrogen bonds as the chains but appear to repel one another on the surface. Annealing treatments lead to the desorption of methanol with almost no decomposition. This data serves as a useful guide to both the preferred adsorption geometries and energies of a variety of methanol structures on Cu(111) surfaces as a function of surface coverage.     

Pt（111）和Pt3Ni（111）表面上CO催化氧化反应的密度泛函理论研究

采用密度泛函理论,对Pt(111)和Pt3Ni(111)表面上CO和O的单独吸附、共吸附以及CO的氧化反应进行了系统的研究. 结果表明, Pt3Ni(111)表面上CO的吸附弱于Pt(111)表面, O的吸附明显强于Pt(111)表面. 两个表面表现出相似的CO催化氧化活性. 表面Ni的存在不但稳定了O的吸附,同时也降低了过渡态O的能量.     

Interaction of SO3 with c-ZrO2(111) films on Pt(111)

Single-crystalline sulfated c-ZrO2(111) films of the cubic (c) type have been prepared by reactive deposition of Zr onto Pt(111) in an O2 atmosphere and subsequent exposition to a SO3 atmosphere. The morphology, atomic structure, and composition have been examined by scanning tunneling microscopy, low-energy electron diffraction (LEED), Auger electron spectroscopy, and density functional theory (DFT) calculations. The clean c-ZrO2(111) films display a (2x2) surface structure. During SO3 exposure at room temperature, a clear (radical3xradical3)R30 degrees structure develops. At about 700 K, the SO3-induced (radical3xradical3)R30 degrees structure disappears and the bright (2x2) LEED pattern of the clean ZrO2 films reappears. The energies of plausible c-ZrO2(111)/SO3 structures have been examined by DFT. The (radical3xradical3)R30 degrees structure found in the experiments turned out to be the most stable one for temperatures below 700 K. At temperatures around 700 K, a disordered low coverage structure may exist, which can not be observed by conventional LEED. A comparison of cubic zirconia surfaces with the alternative tetragonal system yields similar results for the SO3 adsorption in the DFT calculations and shows that c-ZrO2 surfaces are good models for the industrial used tetragonal ZrO2 supports.     

In situ studies of methanol decomposition and oxidation on Pd(111) by PM-IRAS and XPS spectroscopy

Methanol decomposition and oxidation on Pd(111) at millibar pressure were studied by in situ polarization-modulation infrared reflection absorption spectroscopy (PM-IRAS), on-line gas chromatography and pre- and postreaction X-ray photoelectron spectroscopy (XPS). Various dehydrogenation products such as methoxy CH3O, formaldehyde CH2O, formyl CHO, and CO could be spectroscopically identified. Methanol oxidation proceeds via dehydrogenation to formaldehyde CH2O, which either desorbs or is further dehydrogenated to CO, which is subsequently oxidized to CO2. Carbonaceous overlayers that are present during the reaction may favorably affect the selectivity toward CH2O. The reaction takes place on metallic Pd, and no indications of an involvement of Pd surface oxide were observed.