Thermal Decomposition of Cu(II) Complexes with 2-Chloro- and 2,6-Dichlorobenzoic Acid and Imidazole

The reaction products of Cu(II) 2-chlorobenzoate and the imidazole (1), and of Cu(II) 2,6-dichlorobenzoate and the imidazole (2) formulated as CuL’₂⋅2imd⋅2H₂O and CuL”₂⋅2imd⋅2H₂O (L’=C₇H₄ClO₂ ⁻, L”=C₇H₃Cl₂O₂ ⁻, imd=imidazole), were prepared and characterized by means of spectroscopic measurements and thermochemical properties. The blue (1) and green (2) complexes were obtained as solids with a 1:2:2 molar ratio of metal to carboxylate ligand to imidazole. When heated at a heating rate of 10 K min⁻¹ the hydrated complexes, (1) and (2), lose some of the crystallization water molecules and then decompose to gaseous products. This revised version was published online in August 2006 with corrections to the Cover Date.     

Heat Capacities and Thermodynamic Properties of a H2O + Li2B4O7 Solution in the Temperature Range from 80 to 356 K

The molar heat capacities of an aqueous Li₂B₄O₇ solution were measured with a precision automated adiabatic calorimeter in the temperature range from 80 to 356 K at a concentration of 0.3492 mol⋅kg⁻¹. The occurrence of a phase transition was determined based on the changes in the curve of the heat capacity with temperature. A phase transition was observed at 271.72 K corresponding to the solid-liquid phase transition; the enthalpy and entropy of the phase transition were evaluated to be Δ H _m = 4.110 kJ⋅mol⁻¹ and Δ S _m = 15.13 J⋅K⁻¹⋅mol⁻¹, respectively. Using polynomial equations and thermodynamic relationship, the thermodynamic functions [H _T −H _298.15] and [S _T −S _298.15] of the aqueous Li₂B₄O₇ solution relative to 298.15 K were calculated in temperature range 80 to 355 K at intervals of 5 K. Values of the relative apparent molar heat capacities of the aqueous Li₂B₄O₇ solution, C _p,φ, were calculated at every 5 K in temperature range from 80 to 355 K from the experimental heat capacities of the solution and the heat capacities of pure water.     

Thermodynamic Model for ThO<Subscript>2</Subscript>(am) Solubility in Alkaline Silica Solutions

No thermodynamic data for Th complexes with aqueous Si are available. To obtain such data, extensive studies on ThO₂(am) solubility were carried out as functions of: (1) a wide range of aqueous silica concentrations (0.0004 to 0.14 mol⋅L⁻¹) at fixed pH values of about 10, 11, 12, and 13; and (2) and variable pH (ranging from 10 to 13.3) at fixed aqueous Si concentrations of about 0.006 mol⋅L⁻¹ or 0.018 mol⋅L⁻¹. The samples were equilibrated over long periods (ranging up to 487 days), and the data showed that steady-state concentrations were reached in < 29 days. X-ray diffraction, FTIR, and Raman analyses of the equilibrated solid phases showed that the Th solids were amorphous ThO₂(am) containing some adsorbed Si. The solubility of ThO₂(am) at pH values ranging from 10 to 13.3 at fixed 0.018 mol⋅L⁻¹ aqueous Si concentrations decreases rapidly with an increase in pH, and increases dramatically with an increase in Si concentrations beyond about 0.003 mol⋅L⁻¹ at fixed pH values > 10. The data were interpreted using both the Pitzer and SIT models, and required only the inclusion of one mixed-hydroxy-silica complex of Th [Th(OH)₃(H₃SiO₄)₃²⁻]. Both models provided similar complexation constant values for the formation of this species. Density functional theory calculations predict complexes of this stoichiometry, having six-fold coordination of the Th cation, to be structurally stable. Predictions based on the fitted value of log ₁₀ K ⁰=−18.5±0.7 for the ThO₂(am) solubility reaction involving Th(OH)₃(H₃SiO₄)₃²⁻[ThO₂(am)+3H₄SiO₄+H₂O↔Th(OH)₃(H₃SiO₄)₃²⁻+2H⁺], along with the thermodynamic data for aqueous Si species reported in the literature, agreed closely with the extensive experimental data and showed that under alkaline conditions aqueous Si makes very strong complexes with Th.     

High-accuracy determination of iron in seawater by isotope dilution multiple collector inductively coupled plasma mass spectrometry (ID-MC-ICP-MS) using nitrilotriacetic acid chelating resin for pre-concentration and matrix separation

In the present paper we describe a robust and simple method to measure dissolved iron (DFe) concentrations in seawater down to <0.1 nmol L⁻¹ level, by isotope dilution multiple collector inductively coupled plasma mass spectrometry (ID-MC-ICP-MS) using a ⁵⁴Fe spike and measuring the ⁵⁷Fe/⁵⁴Fe ratio. The method provides for a pre-concentration step (100:1) by micro-columns filled with the resin NTA Superflow of 50 mL seawater samples acidified to pH 1.9. NTA Superflow is demonstrated to quantitatively extract Fe from acidified seawater samples at this pH. Blanks are kept low (grand mean 0.045 ± 0.020 nmol L⁻¹, n = 21, 3× S.D. limit of detection per session 0.020–0.069 nmol L⁻¹ range), as no buffer is required to adjust the sample pH for optimal extraction, and no other reagents are needed than ultrapure nitric acid, 12 mM H₂O₂, and acidified (pH 1.9) ultra-high purity (UHP) water. We measured SAFe (sampling and analysis of Fe) reference seawater samples Surface-1 (0.097 ± 0.043 nmol L⁻¹) and Deep-2 (0.91 ± 0.17 nmol L⁻¹) and obtained results that were in excellent agreement with their DFe consensus values: 0.118 ± 0.028 nmol L⁻¹ (n = 7) for Surface-1 and 0.932 ± 0.059 nmol L⁻¹ (n = 9) for Deep-2. We also present a vertical DFe profile from the western Weddell Sea collected during the Ice Station Polarstern (ISPOL) ice drift experiment (ANT XXII-2, RV Polarstern) in November 2004–January 2005. The profile shows near-surface DFe concentrations of 0.6 nmol L⁻¹ and bottom water enrichment up to 23 nmol L⁻¹ DFe.     

A study of the aerobic reaction between dopamine and Fe(III) in the presence of S<Subscript>2</Subscript>O<Subscript>3</Subscript><Superscript>2−</Superscript>

The reaction between Fe(III) and dopamine in aqueous solution in the presence of Na₂S₂O₃ was followed through UV–Vis spectroscopy, pH and oxy-reduction potential (Eh) measurements. The formation and quick disappearing of the complex [Fe(III)HL¹⁻]²⁺, HL¹⁻ = monoprotonated dopamine was observed with or without S₂O₃ ²⁻ at pH 3. An unexpected reaction occurs in presence of thiosulfate forming the stable anion complex [Fe(III)(L²⁻)₂]¹⁻, L²⁻ = dopacatecholate (λ = 580 nm) and the auto-increasing of the pH, from 3 to 7. It was proposed that H⁺ and molecular oxygen are consumed by free radical thiosulfate formed during the reaction.     

Behavior of ethylene and ethane within single-walled carbon nanotubes, 2: dynamical properties

The dynamical behavior of ethylene and ethane confined inside single-walled carbon nanotubes has been studied using Molecular Dynamics and a fully atomistic force field. Simulations were conducted at 300 K in a broad range of molecular densities, 0.026 mol⋅L⁻¹<ρ<15.751 mol⋅L⁻¹(C₂H₄) and 0.011 mol⋅L⁻¹<ρ<14.055 mol⋅L⁻¹(C₂H₆), and were oriented towards the determination of bulk and confined phase self-diffusion coefficients. In the infinite time limit, Fickian self-diffusion is the dominant mode of transport for the bulk fluids. Upon confinement, there is a density threshold (ρ=5.5 mol⋅L⁻¹) below which we observe a mixed mode of transport, with contributions from Fickian and ballistic diffusion. Nanotube topology seems to have only a small influence on the confined fluids’ dynamical properties; instead density (loading capacity) assumes the dominant role. In all cases studied and at a given density, the diffusivities of ethylene are larger than those of ethane, although the difference is relatively minor. We note the collapse of self-diffusivities obtained from the bulk fluids and confined phases into a unique single trend. These results suggest that it might be possible to infer dynamical properties of confined fluids from the knowledge of their bulk phase densities. Electronic Supplementary Material  The online version of this article () contains supplementary material, which is available to authorized users.     

Effect of Ionic Strength and Temperature on the Protonation of Oxidized Glutathione

The protonation constants for oxidized glutathione, H _i−1L^(4−i+1)−, K _i ^H=[H _i L⁽⁴⁻ⁱ⁾⁻]/[H _i−1L^(4−i+1)−][H⁺] i=1,2,…,6 have been measured at 5, 25 and 45 °C as a function of the ionic strength (0.1 to 5.4 mol⋅[kg(H₂O)]⁻¹) in NaCl solutions. The effect of ionic strength on the measured protonation constants has been used to determine the thermodynamic values (K _i ^H0) and the enthalpy (ΔH _i ) for the dissociation reaction using the SIT model and Pitzer equations. The SIT (ε) and Pitzer parameters (β ⁽⁰⁾, β ⁽¹⁾ and C) for the dissociation products (L⁴⁻, HL³⁻, H₂L²⁻, H₃L⁻, H₄L, H₅L⁺, H₆L²⁺) have been determined as a function of temperature. These results can be used to examine the effect of ionic strength and temperature on glutathione in aqueous solutions with NaCl as the major component (body fluids, seawater and brines).     

DSC Monitoring of the Spin Crossover in Fe(II) Complexes

Heat flow to [Fe(bzimpy)²](ClO₄)₂⋅0.25H₂O complex (bzimpy=2,6-bis(benzimidazol-2-yl)pyridine) (I) was measured between 300 and 460 K by differential scanning calorimetry. This exhibits a well-developed peak characteristic of the first-order phase transitions at temperature 403 K. The enthalpy and entropy of transition from low-spin to high-spin state has been determined to be ΔH=17 kJ mol⁻¹ and ΔS=43.0 Jmol⁻¹ K⁻¹. Heat flow to [Fe(bzimpy_−1H)₂]⋅H₂O complex (bzimpy _−1H=deprotonated bzimpy) (II) was measured between 300 and 580 K. The spin crossover in this system is accompanied with liberation of crystal water on the first heating. To monitor the structural changes during the spin crossover, powder diffraction data have been collected as a function of temperature. This revised version was published online in August 2006 with corrections to the Cover Date.     

Stationary points on the energy hypersurface of the reaction O3 + H•→ [•O3H]* ⇆ O2 + •OH and thermodynamic functions of •O3H at G3MP2B3, CCSD(T)-CBS (W1U) and MR-ACPF-CBS levels of theory

The relative enthalpies, ΔH^o (0) and ΔH^o (298.15), of stationary points (four minimum and three transition structures) on the ^•O₃H potential energy surface were calculated with the aid of the G3MP2B3 as well as the CCSD(T)–CBS (W1U) procedures from which we earlier found mean absolute deviations (MAD) of 3.9 kJ mol⁻¹ and 2.3 kJ mol⁻¹, respectively, between experimental and calculated standard enthalpies of the formation of a set of 32 free radicals. For CCSD(T)-CBS (W1U) the well depth from O₃ + H^• to trans-^•O₃H, ΔH^o_well(298.15) = −339.1 kJ mol⁻¹, as well as the reaction enthalpy of the overall reaction O₃ + H^•→O₂ + ^•OH, Δ_rH^o(298.15) = −333.7 kJ mol⁻¹, and the barrier of bond dissociation of trans-^•O₃H → O₂ + ^•OH, ΔH^o(298.15) = 22.3 kJ mol⁻¹, affirm the stable short-lived intermediate ^•O₃H. In addition, for radicals cis-^•O₃H and trans-^•O₃H, the thermodynamic functions heat capacity C^o_p(T), entropy S^o (T), and thermal energy content H^o(T) − H^o(0) are tabulated in the range of 100 − 3000 K. The much debated calculated standard enthalpy of the formation of the trans-^•O₃H resulted to be Δ_fH^o(298.15) = 31.1 kJ mol ⁻¹ and 32.9 kJ mol ⁻¹, at the G3MP2B3 and CCSD(T)-CBS (W1U) levels of theory, respectively. In addition, MR-ACPF-CBS calculations were applied to consider possible multiconfiguration effects and yield Δ_fH^o(298.15) = 21.2 kJ mol ⁻¹. The discrepancy between calculated values and the experimental value of −4.2 ± 21 kJ mol⁻¹ is still unresolved. Note added in proof: Yu-Ran Luo and J. Alistair Kerr, based on the discussion in reference 12, recently presented an experimental value of Δ_fH^o(298.15) = 29.7 ± 8.4 kJ mol⁻¹ in the 85th edition of the CRC Handbook of Chemistry and Physics (in progress).     

Critical Evaluation of Protonation Constants. Literature Analysis and Experimental Potentiometric and Calorimetric Data for the Thermodynamics of Phthalate Protonation in Different Ionic Media

The protonation constants of phthalate were determined in aqueous NaCl (0.1 ≤ I ≤ 5,mol⋅L⁻¹) and in aqueous Me₄NCl (0.1 mol⋅L⁻¹ ≤ I ≤ 3,mol⋅L⁻¹) at t = 25,^∘C. Experimental data were employed in conjunction with literature data from studies in different ionic media (Et₄NI: 0 ≤ I ≤ 1,mol⋅L⁻¹; NaClO₄: 0.05 mol⋅L⁻¹ ≤ I ≤ 2,mol⋅L⁻¹)to study the dependence on ionic strength using different models, such as the SIT and Pitzer equations, and an Extended Debye-Hückel type equation. Experimental calorimetric data in NaCl and protonation constants at different temperatures in Et₄NI (5 ≤ t ≤ 45^∘C) and in NaClO₄ (15 ≤ t ≤ 35 ^∘C) were also used to study their dependence on temperature. Recommended equilibrium data are reported together with a short discussion of a prospective protocol for drawing these data.     

Sulfanilamide copper(II) chelates with 2-[(2-hydroxyphenyl-imino)methyl]phenolom and 1-[(2-hydroxyphenylimino)-methyl]naphthalen-2-ol

2-[(2-Hydroxyphenylimino)methyl]phenol (H²L¹) and 1-[(2-hydroxyphenylimino)methyl]naphthalen-2-ol (H²L²) reacted with copper(II) acetate hydrate and sulfanilamide (Sf¹), sulfathiazole (Sf²), sulfaethidole (Sf³), sulfadiazine (Sf⁴), and sulfadimidine (Sf⁵) in ethanol to give mixed-ligand copper chelates with the composition Cu(Sf^1–5)(L^1–2) · n H₂O (n = 1, 2). All these complexes are monomeric. Salicylaldehyde imines (H₂L¹ and H₂L²) behave as doubly deprotonated tridentate O,N,O ligands, whereas sulfanilamides (Sf^1–5) are unidentate ligands. Thermolysis of the synthesized complexes includes dehydration at 70–90°C, followed by complete thermal decomposition (290–380°C). The complexes [Cu(Sf¹)(L¹)] · 2H₂O and [Cu(Sf³)(L¹)] · H₂O at a concentration of 10⁻⁴ M inhibited growth and reproduction of 100% of human myeloid leukemia cells (HL-60). The inhibitory effect was 90 and 75%, respectively, at a concentration of 10⁻⁵ M, whereas no antitumor activity was observed at a concentration of 10⁻⁶ M.     

PuPO<Subscript>4</Subscript>(cr,hyd.) Solubility Product and Pu<Superscript>3+</Superscript> Complexes with Phosphate and Ethylenediaminetetraacetic Acid

To determine the solubility product of PuPO₄(cr, hyd.) and the complexation constants of Pu(III) with phosphate and EDTA, the solubility of PuPO₄(cr, hyd.) was investigated as a function of: (1) time and pH (varied from 1.0 to 12.0), and at a fixed 0.00032 mol⋅L⁻¹ phosphate concentration; (2) NaH₂PO₄ concentrations varying from 0.0001 mol⋅L⁻¹ to 1.0 mol⋅L⁻¹ and at a fixed pH of 2.5; (3) time and pH (varied from 1.3 to 13.0) at fixed concentrations of 0.00032 mol⋅L⁻¹ phosphate and 0.0004 mol⋅L⁻¹ or 0.002 mol⋅L⁻¹ Na₂H₂EDTA; and (4) Na₂H₂EDTA concentrations varying from 0.00005 mol⋅L⁻¹ to 0.0256 mol⋅L⁻¹ at a fixed 0.00032 mol⋅L⁻¹ phosphate concentration and at pH values of approximately 3.5, 10.6, and 12.6. A combination of solvent extraction and spectrophotometric techniques confirmed that the use of hydroquinone and Na₂S₂O₄ helped maintain the Pu as Pu(III). The solubility data were interpreted using the Pitzer and SIT models, and both provided similar values for the solubility product of PuPO₄(cr, hyd.) and for the formation constant of PuEDTA⁻. The log ₁₀ of the solubility product of PuPO₄(cr, hyd.) [PuPO₄(cr, hyd.) \rightleftarrows\rightleftarrows Pu³⁺+PO₄^3-\mathrm{Pu}^{3+}+\mathrm{PO}_{4}^{3-}] was determined to be −(24.42±0.38). Pitzer modeling showed that phosphate interactions with Pu³⁺ were extremely weak and did not require any phosphate complexes [e.g., PuPO₄(aq), PuH₂PO₄²⁺\mathrm{PuH}_{2}\mathrm{PO}_{4}^{2+}, Pu(H₂PO₄)₂⁺\mathrm{Pu(H}_{2}\mathrm{PO}_{4})_{2}^{+}, Pu(H₂PO₄)₃(aq), and Pu(H₂PO₄)₄^-\mathrm{Pu(H}_{2}\mathrm{PO}_{4})_{4}^{-}] as proposed in existing literature, to explain the experimental solubility data. SIT modeling, however, required the inclusion of PuH₂PO₄²⁺\mathrm{PuH}_{2}\mathrm{PO}_{4}^{2+} to explain the data in high NaH₂PO₄ concentrations; this illustrates the differences one can expect when using these two different chemical models to interpret the data. Of the Pu(III)-EDTA species, only PuEDTA⁻ was needed to interpret the experimental data over a large range of pH values (1.3–12.9) and EDTA concentrations (0.00005–0.256 mol⋅L⁻¹). Calculations based on density functional theory support the existence of PuEDTA⁻ (with prospective stoichiometry as Pu(OH₂)₃EDTA⁻) as the chemically and structurally stable species. The log ₁₀ value of the complexation constant for the formation of PuEDTA⁻ [ Pu³⁺+EDTA^4-\rightleftarrows PuEDTA^-\mathrm{Pu}^{3+}+\mathrm{EDTA}^{4-}\rightleftarrows \mathrm{PuEDTA}^{-}] determined in this study is −20.15±0.59. The data also showed that PuHEDTA(aq), Pu(EDTA)₄^5-\mathrm{Pu(EDTA)}_{4}^{5-}, Pu(EDTA)(HEDTA)⁴⁻, Pu(EDTA)(H₂EDTA)³⁻, and Pu(EDTA)(H₃EDTA)²⁻, although reported in the literature, have no region of dominance in the experimental range of variables investigated in this study.     

Coordination chemistry of copper(II) complexes with N4, N4S2, and N4O2 donor macrocyclic ligands: Biological aspects—antifungal, synthesis, spectral studies, and magnetic moments

Three macrocyclic ligands and their complexes with copper(II) salts (with anions Cl⁻, NO ₃ ⁻ , and NCS⁻) were prepared and investigated using a combination of microanalytical analysis, melting point, molar conductance measurement, magnetic susceptibility measurement, and electronic, IR and ESR spectral studies. Ligands L¹, L², and L³ having N₄, N₄O₂, and N₄S₂ core, respectively, and all the donor atoms of these ligands are bonded with Cu, which is confirmed by a seven-line pattern observed at half-field in the frozen (H₂O: MeOH = 10: 1 at pH 10) solution ESR spectrum. The polycrystalline ESR data (g _∥ = 2.20–2.27, g _⊥ = 2.01–2.05, and A _∥ = 120–270) of all the complexes together with the high asymmetry geometry suggest that all complexes appear to be near the static distortion (CuN₄O₂ and CuN₄S₂ chromophore geometry). The electronic spectra of the complexes involve two bands at the same intensity corresponding to a cis-distorted octahedral geometry. A common structural feature of both ligand L² and ligand L³ is that two different donor atoms at five-membered heterocyclic aromatic ring due to this N₄O₂ and N₄S₂ chromophore form stable six-membered chelate rings with metals via these two, Cu-O and Cu-S, new interactions comparatively to the first macrocyclic ligand, which has four-membered N,N′-chelate rings. The cyclic voltammetric studies point to a two-step electron transfer indicating the reduction of the two copper atoms to copper(I), i.e., Cu(III)Cu(II) ⇄ Cu(II)Cu(I) ⇄ Cu(I)Cu(0). The molar conductance for the complexes corresponds to 1: 2 and is nonelectrolyte in nature. The magnetic moment (μ_eff) of the complexes lie in the range between 1.80–1.96 μ_B. Finally, these complexes were screened for their antimicrobial activity against Aspergillus-niger of fungal strains. The text was submitted by the authors in English.     

Synthesis and spectral properties of titanium(iv) polynuclear hydroxo complexes stabilized in solution by the [PW11O39]7− heteropolyanion

Unsaturated heteropolyanions (HPA) [PW₁₁O₃₉]⁷⁻ stabilize Ti^IV hydroxo complexes in aqueous solutions (Ti: PW₁₁ [PW₁₁O₃₉]⁷⁻⪯12, pH 1–3). Spectral studies (optical,¹⁷O and³¹P NMR, and IR spectra) and studies by the differential dissolution method demonstrated that Ti^IV hydroxo complexes are stabilized through interactions of polynuclear Ti^IV hydroxo cations with heteropolyanions [PW₁₁TiO₄₀ ⁵⁻ formed. Depending on the reaction conditions, hydroxo cations Ti _n−1O _x H _y ^m+ either add to oxygen atoms of the W−O−Ti bridges of the heteropolyanions to form the complex [PW₁₁TiO₄₀·Ti _n−1O _x H _y ] ^k− (at [HPA]=0.01 mol L⁻¹) or interact with Ti^IV of the heteropolyanions through the terminal o atom to give the polynuclear complexes [PW₁₁O₃₉Ti−O−Ti _n−1O _x H _y ]^q− (at [HPA]=0.2 mol L⁻¹). When the complexes of the first type were treated with H₂O₂, Ti^IV ions added peroxo groups. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 914–920, May, 1997.     

Application of Fenton reaction for nanomolar determination of hydrogen peroxide in seawater

A simple and sensitive method for the determination of nanomolar levels of hydrogen peroxide (H₂O₂) in seawater has been developed and validated. This method is based on the reduction of H₂O₂ by ferrous iron in acid solution to yield hydroxyl radical (OH) which reacts with benzene to produce phenol. Phenol is separated from the reaction mixture by reversed phase high performance liquid chromatography and its fluorescence intensity signals were measured at excitation and emission of 270 and 298 nm, respectively. Under optimum conditions, the calibration curve exhibited linearity in the range of (0-50) × 10³ nmol L⁻¹ H₂O₂. The relative standard deviations for five replicate measurements of 500 and 50 nmol L⁻¹ H₂O₂ are 1.9 and 2.4%, respectively. The detection limit for H₂O₂, defined as three times the standard deviation of the lowest standard solution (5 nmol L⁻¹ H₂O₂) in seawater is 4 nmol L⁻¹. Interference of nitrite ion (NO₂⁻) on the fluorescence intensity of phenol was also investigated. The result indicated that the addition of 10 μmol L⁻¹ NO₂⁻ to seawater samples showed no significant interference, although, the addition of 50 μmol L⁻¹ NO₂⁻ to the seawater samples decreases the fluorescence intensity signals of phenol by almost 40%. Intercomparison of this method with well-accepted (p-hydroxyphenyl) acetic acid (POHPAA)-FIA method shows excellent agreement. The proposed method has been applied on-board analysis of H₂O₂ in Seto Inland seawater samples.     

Photochemical degradation of typical halogenated herbicide 2,4-D in drinking water with UV/H<Subscript>2</Subscript>O<Subscript>2</Subscript>/micro-aeration

UV/H₂O₂/micro-aeration is a newly developed process based on UV/H₂O₂. Halogenated pesticide 2,4-dichlorophenoxyacetic acid (2,4-D) photochemical degradation in aqueous solution was studied under various solution conditions. The UV intensity, initial 2,4-D concentrations and solution temperature varied from 183.6 to 1048.7 μW·cm⁻², from 59.2 to 300.0 μg·L⁻¹ and from 15 to 30°C, respectively. The concentration of hydrogen peroxide (H₂O₂) and pH ranged from 0 to 50 mg·L⁻¹ and 5 to 9, and different water quality solutions (tap water, distilled water and deionized water) were examined in this study. With initial concentration of about 100 μg·L⁻¹, more than 95.6% of 2,4-D can be removed in 90 min at intensity of UV radiation of 843.9 μW·cm⁻², H₂O₂ dosage of 20 mg·L⁻¹, pH 7 and room temperature. The removal efficiency of 2,4-D by UV/H₂O₂/micro-aeration process is better than UV/H₂O₂ process. The photodecomposition of 2,4-D in aqueous solution follows pseudo-first-order kinetics. 2,4-D is greatly affected by UV irradation intensity, H₂O₂ dosage, initial 2,4-D concentration and water quality solutions, but it appears to be slightly influenced by pH and temperature. There is a linear relationship between rate constant k and UV intensity and initial H₂O₂ concentration, which indicates that higher removal capacity can be achieved by the improvement of these factors. Finally, a preliminary cost analysis reveals that UV/H₂O₂/micro-aeration process is more cost-effective than the UV/H₂O₂ process in the removal of 2,4-D from drinking water.     

Kinetics of radical formation and decay in photooxidation of 4-halophenols sensitized by 4-carboxybenzophenone in aqueous solutions

Kinetics of formation and recombination of radicals formed by quenching of the triplet state of 4-carboxybenzophenone (CB) with para-substituted phenol derivatives RC₆H₄OH (R = OMe, H, Cl, Br, I) in aqueous solutions was studied by nanosecond laser photolysis. At pH ≥ 5.4, quenching proceeds with high rate constants ((1–3)⋅10⁹ L mol⁻¹ s⁻¹) through electron transfer to form the radical anion CB^⋅− and radical cation RC₆H₄OH^⋅+. The latter is transformed into the phenoxyl radical within ≤10 ns. At pH ≤ 8, the CB^⋅− radical anion is protonated in a phosphate buffer with the rate constant increasing from 4⋅10⁶ to 15⋅10⁶ s⁻¹ with a decrease in the pH from 8 to 5.4. The yield of radicals decreases from 100 to 13% as the atomic weight of halogen in the RC₆H₄OH molecule increases due to an increase in the probability of recombination of the primary triplet radical pair in the solvent cage and partial intersystem crossing in an encounter complex (³CB, RC₆H₄OH). The effect of heavy atom is also observed in the kinetics of volume recombination of the radicals, the magnitude of effect corresponds to the acceleration of the primary recombination of the triplet radical pair. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1397–1402, June, 2005.     

Kinetics of oxidation of N,N-bis(salicylaldehyde-1,2-diaminoethane) cobalt(II) complex by periodate. Evidence for the inhibiting effect of copper(II)

A kinetic study of the oxidation of [Co(H₂L)(H₂O)₂]²⁺ (H₂L = N,N-bis (salicylaldehyde-1,2-diaminoethane) Schiff base) by periodate in aqueous solution was performed over pH (2.3–3.4) range, (0.1–0.5) mol dm⁻³ ionic strength and temperatures 20–35 °C for a range of periodate and complex concentrations. The reaction rate showed a first-order dependence on both reactants and increased with pH over the range studied. The effects of Cu(II) and Fe(II) on the reaction rate were investigated over the (1.0–9.0) × 10⁻⁵ mol dm⁻³ range. The reaction was inhibited as the concentration of Cu(II) increased, and it was independent on Fe(II) concentrations over the ranges studied. An inner-sphere mechanism is proposed for the oxidation pathways of both the protonated and deprotonated Co^II complex species.     

Kinetics of oxidation of nickel(II) aza macrocycles by peroxydisulphate in aqueous media

The kinetics of the oxidation of nickel (II) hexaaza and nickel (II) pentaaza macrocycles by the peroxydisulphate anion, S₂O₈ ²⁻, were studied in aqueous media. Effect of pH on reaction rate was also studied. The rate increases with increase of S₂O₈ ²⁻ concentration. Rates are almost independent of acid betweenpH 4 and 2, giving overall a relatively simple second-order rate law followed by oxidation within the ion pair solvent shell. Using rate =+1/2 d[Ni(L)³⁺]/dt =k[Ni(L)²⁺][S₂O₈ ²⁻], oxidation rate constants were determined.     

Structure and magnetic properties of a dtm-bridged two-dimensional supramolecular complex {[Fe(dtm)2(H2O)2](ClO4)2 · 2H2O} n (dtm = 4,4′-ditriazolemethane)

This work presents the synthesis, crystal structure and magnetic properties of a novel dtm-bridged 2D iron(II) supramolecular complex {[Fe(dtm)₂(H₂O)₂](ClO₄)₂ · 2H₂O} _n (1). The 2D structure of (1) is formed by the incorporation of coordinative linkage and hydrogen-bonding interactions between the oxygen atoms of the anion water cluster [(ClO₄)₂ · 4H₂O]²⁻ and 1D cation complex chain {[Fe(dtm)₂(H₂O)₂]²⁻. The magnetic behavior reveals an antiferromagnetic interaction between Fe(II) ions through hydrogen bonded bridges.