Adsorption to metal oxides of the Pseudomonas aeruginosa siderophore pyoverdine and implications for bacterial biofilm formation on metals

The initiation of biofilm formation is poorly understood, and in particular, the contribution of chemical bond formation between bacterial cells and metal surfaces has received little attention. We have previously used in situ infrared spectroscopy to show, during the initial stages of Pseudomonas aeruginosa biofilm formation, the formation of coordinate covalent bonds between titanium dioxide particle films and pyoverdine, a mixed catecholate and hydroxamate siderophore. Here we show using infrared spectroscopy that pyoverdine can also form covalent bonds with particle films of Fe2O3, CrOOH, and AlOOH. Adsorption to the metal oxides through the catechol-like 2,3-diamino-6,7-dihydroxyquinoline part of pyoverdine was most evident in the infrared spectrum of the adsorbed pyoverdine molecule. Weaker infrared absorption bands that are consistent with the hydroxamic acids of pyoverdine binding covalently to TiO2, Fe2O3, and AlOOH surfaces were also observed. The adsorption of pyoverdine to TiO2 and Fe2O3 surfaces showed a pH dependence that is indicative of the dominance of the catechol-like ligand of pyoverdine. Infrared absorption bands were also evident for pyoverdine associated with the cells of P. aeruginosa on TiO2 and Fe2O3 surfaces and were notably absent for genetically modified cells unable to synthesize or bind pyoverdine at the cell surface. These studies confirm the generality of pyoverdine-metal bond formation and suggest a wider involvement of siderophores in bacterial biofilm initiation on metals.     

Bromoenterobactins as potent inhibitors of a pathogen-associated, siderophore-modifying C-glycosyltransferase

IroB is a C-glycosyltransferase encoded in the iroA cluster. C-Glucosylation of the bacterial siderophore enterobactin by IroB is a strategy some pathogenic bacteria use to evade the host's innate immunity mediated by lipocalin 2 (Lcn2). Without this modification, enterobactin can be tightly bound by host Lcn2, rendering it ineffective as a siderophore. Therefore, IroB inhibitors could be potential antibiotics against iroA-harboring pathogenic bacteria. We used enterobactin analogues to probe the properties of the active site of IroB and found that enterobactin analogues brominated at the C5 positions of the 2,3-dihydroxybenzoyl rings are potent inhibitors of IroB. This finding could lead to the discovery of effective antibiotics targeting iroA-containing bacteria.     

Enterobactin protonation and iron release: structural characterization of the salicylate coordination shift in ferric enterobactin

The siderophore enterobactin (Ent) is produced by many species of enteric bacteria to mediate iron uptake. This iron scavenger can be reincorporated by the bacteria as the ferric complex [Fe(III)(Ent)](3)(-) and is subsequently hydrolyzed by an esterase to facilitate intracellular iron release. Recent literature reports on altered protein recognition and binding of modified enterobactin increase the significance of understanding the structural features and solution chemistry of ferric enterobactin. The structure of the neutral protonated ferric enterobactin complex [Fe(III)(H(3)Ent)](0) has been the source of some controversy and confusion in the literature. To demonstrate the proposed change of coordination from the tris-catecholate [Fe(III)(Ent)](3)(-) to the tris-salicylate [Fe(III)(H(3)Ent)](0) upon protonation, the coordination chemistry of two new model compounds N,N',N'-tris[2-(hydroxybenzoyl)carbonyl]cyclotriseryl trilactone (SERSAM) and N,N',N'-tris[2-hydroxy,3-methoxy(benzoyl)carbonyl]cyclotriseryl trilactone (SER(3M)SAM) was examined in solution and solid state. Both SERSAM and SER(3M)SAM form tris-salicylate ferric complexes with spectroscopic and solution thermodynamic properties (with log beta(110)() values of 39 and 38 respectively) similar to those of [Fe(III)(H(3)Ent)](0). The fits of EXAFS spectra of the model ferric complexes and the two forms of ferric enterobactin provided bond distances and disorder factors in the metal coordination sphere for both coordination modes. The protonated [Fe(III)(H(3)Ent)](0) complex (d(Fe)(-)(O) = 1.98 A, sigma(2)(stat)(O) = 0.00351(10) A(2)) exhibits a shorter average Fe-O bond length but a much higher static Debye-Waller factor for the first oxygen shell than the catecholate [Fe(III)(Ent)](3)(-) complex (d(Fe)(-)(O) = 2.00 A, sigma(2)(stat)(O) = 0.00067(14) A(2)). (1)H NMR spectroscopy was used to monitor the amide bond rotation between the catecholate and salicylate geometries using the gallic complexes of enterobactin: [Ga(III)(Ent)](3)(-) and [Ga(III)(H(3)Ent)](0). The ferric salicylate complexes display quasi-reversible reduction potentials from -89 to -551 mV (relative to the normal hydrogen electrode NHE) which supports the feasibility of a low pH iron release mechanism facilitated by biological reductants.     

Microbial evasion of the immune system: structural modifications of enterobactin impair siderocalin recognition

The mammalian protein siderocalin binds and inactivates the ferric complex of the bacterial siderophore enterobactin with a Kd value similar to that of the bacterial receptor FepA. However, microorganisms can evade this immune response by structural modifications of the siderophore. The binding of siderophores by siderocalin relies in part on electrostatic interactions and does not depend greatly on what metal is in the complex. It is also sterically limited by the rigid conformation of the protein calyx; methylation of the three catecholate rings of enterobactin hinders siderocalin recognition. The siderocalin binding has been probed for a series of enterobactin analogues in order to investigate in detail the specificity of siderocalin recognition.     

Infrared spectroscopic studies of siderophore-related hydroxamic acid ligands adsorbed on titanium dioxide

The adhesion of bacteria to metal oxide and other mineral surfaces may involve bacterial siderophores, many of which contain hydroxamic acid (Ha) ligands. The adsorption behavior of the siderophore-related ligands acetohydroxamic acid, N-methylformohydroxamic acid, N-methylacetohydroxamic acid, and 1-hydroxy-2-piperidone on titanium dioxide thin films has been investigated using in situ ATR-IR spectroscopy with variation of concentration and pH. All the ligands were found to adsorb strongly on the TiO2 surface as hydroxamate ions and form bidentate surface complexes. Vibrational modes involving C=O stretching and N-O stretching of these ligands were assigned by comparing observed IR spectra with those calculated by the density functional method at the B3LYP/6-31+G(d) level. Calculated spectra of the complex [Ti(Ha)(OH)4]-, used to model the TiO2 surface, were compared with observed spectra of adsorbed hydroxamic acids. These results suggest that hydroxamic acid ligands in siderophores would be expected to bind to metal (oxide) and mineral surfaces during bacterial adhesion processes.     

Catecholate/salicylate heteropodands: demonstration of a catecholate to salicylate coordination change

While iron release from enterobactin-mediated iron transport occurs primarily via an esterase that destroys the siderophore, other catechol siderophores that are not susceptible to hydrolysis act as bacterial growth factors. Elucidating the structures of protonated ferric enterobactin may reveal the pathway by which synthetic analogues fulfill bacterial iron requirements. In order to more completely model this potential delivery pathway for ferric iron, as well as to understand the pH dependent structural dynamics of ferric enterobactin, two ligands, (2-hydroxybenzoyl-2-aminoethyl)-bis(2,3-dihydroxybenzoyl-2-aminoethyl)amine (TRENCAMSAM) and (2-hydroxy-3-methoxybenzoyl-2-aminoethyl)-bis(2,3-dihydroxybenzoyl-2- aminoethyl)amine (TRENCAM(3M)SAM), have been synthesized as models for monoprotonated enterobactin. The coordination chemistry of these ligands with Fe3+ and Al3+ has been investigated. Fe[TRENCAMSAM]2- crystallizes in the triclinic space group P1: Z = 1, a = 11.3307(6) A, b = 12.5479(7) A, c = 15.5153(8) A, alpha = 94.513(1) degree, beta = 105.867(1) degree, gamma = 94.332(1) degree. The structure is a two-metal two-ligand dimer supported by mu-oxo bridges from two catecholate moieties. Al[TRENCAMSAM]2- crystallizes in the triclinic space group P1: Z = 2, a = 9.1404(2) A, b = 13.3570(1) A, c = 15.5950(1) A, alpha = 95.711(1) degree, beta = 104.760(1) degree, gamma = 92.603(1) degree. The complex is a monomer with a five-coordinate, square-pyramidal aluminum cation. Al[TRENCAM(3M)SAM]2- crystallizes in the monoclinic space group C2/m: Z = 8, a = 34.244(2) A, b = 11.6206(6) A, c = 21.9890(12) A, beta = 101.478(1) degree. The complex is also a monomer, but with a highly distorted five-coordinate, square-pyramidal aluminum cation coordination sphere. At high pH these complexes do not display a salicylate mode of binding; however, at low pH Al[TRENCAMSAM]2- converts to protonated Al[H3TRENCAMSAM]+, which is a six-coordinate, tris-salicylate complex. Al[H3TRENCAMSAM]+ crystallizes in the triclinic space group P1: Z = 2, a = 11.5475(4) A, b = 12.1681(4) A, c = 12.5094(4) A, alpha = 109.142(1) degree, beta = 104.327(1) degree, gamma = 103.636(1) degree. This is the first catecholamide enterobactin analogue that has been structurally characterized in both a catecholate and salicylate mode of coordination.     

Biosynthetic tailoring of microcin E492m: post-translational modification affords an antibacterial siderophore-peptide conjugate

The present work reveals that four proteins, MceCDIJ, encoded by the MccE492 gene cluster are responsible for the remarkable post-translational tailoring of microcin E492 (MccE492), an 84-residue protein toxin secreted by Klebsiella pneumonaie RYC492 that targets neighboring Gram-negative species. This modification results in attachment of a linearized and monoglycosylated derivative of enterobactin, a nonribosomal peptide and iron scavenger (siderophore), to the MccE492m C-terminus. MceC and MceD derivatize enterobactin by C-glycosylation at the C5 position of a N-(2,3-dihydroxybenzoyl)serine (DHB-Ser) moiety and regiospecific hydrolysis of an ester linkage in the trilactone scaffold, respectively. MceI and MceJ form a protein complex that attaches C-glycosylated enterobactins to the C-terminal serine residue of both a C10 model peptide and full-length MccE492. In the enzymatic product, the C-terminal serine residue is covalently attached to the C4' oxygen of the glucose moiety. Nonenzymatic and base-catalyzed migration of the peptide to the C6' position affords the C6' glycosyl ester linkage observed in the mature toxin, MccE492m, isolated from bacterial cultures.     

Iron(III) uptake and release by chrysobactin, a siderophore of the phytophatogenic bacterium Erwinia chrysanthemi

The plant pathogenic enterobacterium Erwinia chrysanthemi causes important soft-rot disease on a wide range of plants including vegetables and ornamentals of economic importance. It produces a major mono(catecholate) siderophore, chrysobactin (alpha-N-(2,3-dihydroxybenzoyl)-D-lysyl-L-serine). To unravel the role of chrysobactin in the virulence of E. chrysanthemi, its iron(III) coordination properties were thus investigated in aqueous solutions using electrospray ionization mass spectrometric, potentiometric, and spectrophotometric methods. Moreover, kinetic experiments allowed us to determine the uptake and release mechanisms. The formation mechanism of the 1:1 complex reveals a key role of the terminal carboxylic group of chrysobactin in the binding of either FeOH(2+) or Fe2(OH)2(4+). The proton-driven dissociation of the ferric tris-, bis-, and mono(chrysobactin) complexes was also studied. For these three ferric complexes, a single protonation triggers the release of the bound chrysobactin molecule. Interestingly, the dissociation of the last ligand proceeded via the formation of an intermediate for which a salicylate-type mode of bonding was proposed.     

Total synthesis and structure revision of petrobactin

The total synthesis and the revised structural assignment of petrobactin, a siderophore isolated from the marine bacterium Marinobacter hydrocarbonoclasticus, is reported. The key step in the synthesis involved condensation of N¹-(2,3-dibenzoyloxybenzoyl)-N⁴-benzylspermidine with 1,3-di-(p-nitrophenyl)-2-tert-butyl citrate. Proton NMR spectra of the synthesized product compared with those reported for the natural product revealed that the compound did not contain 2,3-dihydroxybenzoyl moieties as published; instead, the splitting pattern suggested 3,4-dihydroxybenzoyl fragments. The 3,4-dihydroxybenzoyl analogue was accessed via a similar route; the proton and carbon-13 NMR spectra of this compound were consistent with those reported for natural petrobactin.     

Tetrameric,trititanium(IV)-substituted polyoxotungstates with an alpha-Dawson substructure as soluble metal-oxide analogues: molecular structure of the giant "tetrapod" [(alpha-1,2,3-P2W15Ti3O62)4[mu3-Ti(OH)3]4Cl]45-

The preparation and structural characterization of the novel polyoxoanion [(alpha-1,2,3-P(2)W(15)Ti(3)O(62))(4)[mu(3)-Ti(OH)(3)](4)Cl](45-) (1 a; abbreviated to [TiO(6)](16); FW approximately 16 000) which consists of four tri-Ti(IV)-1,2,3-substituted alpha-Dawson substructures, four Ti(OH)(3) bridging groups, and one encapsulated Cl(-) ion, are described. A water-soluble, all-inorganic composition compound of the tetrameric Ti-O-Ti-bridged anhydride form, Na(x)H(45-x)[1 a].y H(2)O (1; x=16-19, y=60-70), which was afforded by the reaction of the tri-lacunary Dawson polyoxotungstate Na(12)[B-alpha-P(2)W(15)O(56)].19 H(2)O with an excess of TiCl(4) in aqueous solution, was obtained as analytically pure, homogeneous colorless crystals. Single-crystal X-ray structure analysis revealed that 1 a was an inorganic, giant "tetrapod"-shaped molecule (inscribed to a sphere with a diameter of approximately 32 A) with approximately T(d) symmetry, in which the 16 edge- and/or corner-shared TiO(6) octahedra were contained. This number of TiO(6) octahedra was larger than that found in other titanium(IV)-substituted polyoxotungstates. Complex 1 was characterized by complete elemental analysis, TG/DTA, FTIR, UV/Vis absorption, and solution ((31)P and (183)W) NMR spectroscopy. The longest wavelength band in the UV/Vis absorption spectra of 1 in water was attributed to the O-->Ti(IV) ligand-to-metal charge-transfer (LMCT) transition: the wavelength of the LMCT band increased linearly as the number of TiO(6) octahedra contained in the Keggin and Dawson polyoxoanions increased. The Ti(n) chromophores formed in the Keggin and Dawson polyoxotungstates are water-soluble analogues of solid TiO(2) or SrTiO(3) as light-semiconductors and photocatalysts.     

Structural criteria for the rational design of selective ligands. 3. Quantitative structure-stability relationship for iron(III) complexation by tris-catecholamide siderophores

We present an extended MM3 model for catecholamide ligands and their Fe(3+) complexes and the application of this model to understand how ligand architecture effects Fe(3+) binding affinity. Force field parameters were fit to geometries and energies from electronic structure calculations, and to crystal structure data. Optimized geometries are reported for phenol, acetamide, the phenol-phenol dimer, the acetamide-phenol dimer, and N-methylsalicylamide (HMSA) at the BLYP/DZVP2/A2 level of theory. Optimized geometries and relative energies are reported for the pseudo-octahedral ground state and the trigonal planar transition state of [Fe(CAT)(3)](3)(-) at the VWN/DZVP2/A1 level of theory. The MM3 model is validated by comparison of calculated structures with crystal structures containing 1,2-dihydroxybenzene (H(2)CAT) and 2,3-dihydroxy-N-methylbenzamide (H(2)MBA) fragments, crystal structures of [Fe(CAT)(3)](3)(-) and tris-catecholamide Fe(3+) complexes, and comparison of MM3 (6.8 kcal/mol) and VWN (5.9 kcal/mol) barriers for intramolecular octahedral inversion in [Fe(CAT)(3)](3)(-). The MM3 model also rationalizes the higher inversion barrier (14 to 18 kcal/mol) reported for [Ga(N,N-diisopropylterephthalamide)(3)](3)(-) ([Ga(DIPTA)(3)](3)(-)). Conformational searches were performed on enterobactin (H(6)ENT), 1,3,5-tris(2,3-dihydroxybenzamidomethyl)-2,4,6-triethylbenzene (H(6)EMECAM), 1,3,5-tris(2,3-dihydroxybenzamidomethyl)-2,4,6-trimethylbenzene (H(6)MMECAM), 1,3,5-tris(2,3-dihydroxybenzamidomethyl)benzene (H(6)MECAM), and 1,5,9-N,N',N' '-tris(2,3-dihydroxybenzoyl)cyclotriazatridecane (H(6)-3,3,4-CYCAM) and Fe(3+) complexes with each of these ligands. A conformational search also was done on the Fe(3+) complex with the 2,2',2' '-tris(2,3-dihydroxybenzamido)triethylammonium cation (H(7)TRENCAM(+)). The relationship between calculated steric energies and measured thermodynamic quantities is discussed, and linear correlations between formation constants and steric energy differences are reported. Extrapolation to zero strain predicts formation constants 8 +/- 5 orders of magnitude higher than that exhibited by ENT (10(49)) are possible. This prediction is supported by a formation constant of 10(63) estimated from the formation constant of [Fe(2,3-dihydroxy-N,N-dimethylbenzamide)(3)](3)(-) ([Fe(DMBA)(3)](3)(-)) by considering the entropic consequences of connecting three DMBA ligands to a rigid backbone. Structural criteria for the identification of improved tris-catecholate ligand architectures are presented.     

Vanchrobactin: absolute configuration and total synthesis

The stereochemistry of vanchrobactin, a siderophore produced by the bacterial fish pathogenVibrio anguillarum serotype O2, was elucidated by chiral capillary electrophoresis analysis and total synthesis as N-[N′-(2,3-dihydroxybenzoyl)-d-arginyl]-l-serine.     

Probing defect sites on TiO2 with [Re3(CO)12H3]: spectroscopic characterization of the surface species

Samples of the anatase phase of titania were treated under vacuum to create Ti(3+) surface-defect sites and surface O(-) and O(2) (-) species (indicated by electron paramagnetic resonance (EPR) spectra), accompanied by the disappearance of bridging surface OH groups and the formation of terminal Ti(3+)-OH groups (indicated by IR spectra). EPR spectra showed that the probe molecule [Re(3)(CO)(12)H(3)] reacted preferentially with the Ti(3+) sites, forming Ti(4+) sites with OH groups as the [Re(3)(CO)(12)H(3)] was adsorbed. Extended X-ray absorption fine structure (EXAFS) spectra showed that these clusters were deprotonated upon adsorption, with the triangular metal frame remaining intact; EPR spectra demonstrated the simultaneous removal of surface O(-) and O(2) (-) species. The data determined by the three complementary techniques form the basis of a schematic representation of the surface chemistry. According to this picture, during evacuation at 773 K, defect sites are formed on hydroxylated titania as a bridging OH group is removed, forming two neighboring Ti(3+) sites, or, when a Ti(4+)-O bond is cleaved, forming a Ti(3+) site and an O(-) species, with the Ti(4+)-OH group being converted into a Ti(3+)-OH group. When the probe molecule [Re(3)(CO)(12)H(3)] is adsorbed on a titania surface with Ti(3+) defect sites, it reacts preferentially with these sites, becoming deprotonated, removing most of the oxygen radicals, and healing the defect sites.     

Adsorption and reaction of methanol on stoichiometric and defective SrTiO3(100) surfaces

The adsorption and reaction of methanol (CH(3)OH) on stoichiometric (TiO(2)-terminated) and reduced SrTiO(3)(100) surfaces have been investigated using temperature-programmed desorption (TPD), X-ray photoelectron spectroscopy (XPS), and first-principles density-functional calculations. Methanol adsorbs mostly nondissociatively on the stoichiometric SrTiO(3)(100) surface that contains predominately Ti(4+) cations. Desorption of a monolayer methanol from the stoichiometric surface is observed at approximately 250 K, whereas desorption of a multilayer methanol is found to occur at approximately 140 K. Theoretical calculations predict weak adsorption of methanol on TiO(2)-terminated SrTiO(3)(100) surfaces, in agreement with the experimental results. However, the reduced SrTiO(3)(100) surface containing Ti(3+) cations exhibits higher reactivity toward adsorbed methanol, and H(2), CH(4), and CO are the major decomposition products. The surface defects on the reduced SrTiO(3)(100) surface are partially reoxidized upon saturation exposure of CH(3)OH onto this surface at 300 K.     

Cover Feature: How Many O-Donor Groups in Enterobactin Does It Take to Bind a Metal Cation? (Chem. Eur. J. 28/2019)

The E. coli siderophore enterobactin, the strongest Fe^III chelator known to date, forms hexacoordinate complexes with Si^IV, Ge^IV, and Ti^IV. Synthetic protocols have been developed to prepare non-symmetric enterobactin analogues with varying denticities. Various benzoic acid residues were coupled to the macrocyclic lactone to afford a diverse library of ligands. These enterobactin analogues were bound to Si^IV, Ge^IV, and Ti^IV, and the complexes were investigated through experimental and computational techniques. The binding behavior of the synthesized chelators enabled assessment of the contribution of each of the phenolic hydroxy groups in enterobactin to metal-ion complexation. It was found that at least four O-donors are needed for enterobactin derivatives to act as metal binders. Density functional theory calculations indicate that the strong binding behavior of enterobactin can be ascribed to a diminished translational entropy penalty, a common feature of the chelate effect, coupled with the structural arrangement of the three catechol moieties, which allows the triseryl base to be installed without distorting the preferred local metal-binding geometry of the catecholate ligands.     

Synthesis and Structural Characterization of Hexacoordinate Silicon,Germanium, and Titanium Complexes of the E. coli Siderophore Enterobactin

The E. coli siderophore enterobactin, one of the strongest Fe^III chelators known to date, is also capable of binding Si^IV under physiological conditions. We report on the synthesis and structural characterization of the tris(catecholate) Si^IV–enterobactin complex and its Ge^IV and Ti^IV analogues. Comparative structural analysis, supported by quantum‐chemical calculations, reveals the correlation between the ionic radius and the structural changes in enterobactin upon complexation.     

Synthesis of uniform anatase TiO2 nanoparticles by the gel-sol method 2. Adsorption of OH- Ions to Ti(OH)4 gel and TiO2 particles

The pH value in the gel-sol system for the preparation of uniform anatase TiO2 nanoparticles, as a decisive factor for controlling the size and shape of the final product, was found to be significantly changed during the formation process of the anatase TiO2 particles from a condensed Ti(OH)4 gel. The dramatic evolution of pH with the progress of the synthetic process has clearly been explained in terms of the adsorption and desorption of a hydroxide ion (OH-) ora proton (H+) on the solids transforming with time. The adsorption and desorption of OH- or H+ were enhanced by the presence of an inert electrolyte such as NaClO4, as explained by its shielding effect on the electrical interactions between the electrically charged precipitates and free OH- and H+ ions. The electrolyte also hampered the phase transformation of Ti(OH)4 precipitate to anatase TiO2. This effect of electrolytes was explained in terms of the inhibited nucleation of anatase TiO2 by enhanced adsorption of OH- ions toTiO2 embryos. The points of zero charge (PZC) of the amorphous Ti(OH)4 precipitate and the anatase TiO2 particles at 25 degrees C were obtained from the change in pH associated with the adsorption and desorption of OH- or H+, i.e., 4.6 for Ti(OH)4 precipitate and 6.0 for anatase TiO2 in the presence of 0.1 mol dm(-3) NaClO4. The PZCof the Ti(OH)4 precipitate measured at 25 degrees C after additional aging at 100 degrees C for 30 min was shifted to 4.1, owing to the promoted adsorption of OH-.     

Rational design and assembly of M(2)M'(3)L(6) supramolecular clusters with C(3h) symmetry by exploiting incommensurate symmetry numbers.

A rational approach to heterometallic cluster formation is described that uses incommensurate symmetry requirements at two different metals to control the stoichiometry of the assembly. Critical to this strategy is the proper design and synthesis of hybrid ligands with coordination sites selective toward each metal. The phosphino-catechol ligand 4-(diphenylphosphino)benzene-1,2-diol (H(2)L) possesses both hard catecholate and soft phosphine donor sites and serves such a role, using soft (C(2)-symmetric) and hard (C(3)-symmetric) metal centers. The ML(3) catecholate complexes (M = Fe(III), Ga(III), Ti(IV), Sn(IV)) have been prepared and characterized as C(3)-symmetry precursors for the stepwise assembly (aufbau) of heterometallic clusters. While the single-crystal X-ray structure of the Cs(2)[TiL(3)] salt shows a C(1) mer-configuration in the solid -state, room-temperature solution NMR data of this and related complexes are consistent with either exclusive formation of the C(3)-fac-isomer with all PPh(2) donor sites syn to each other or facile fac/mer isomerization. Coordination of these [ML(3)](2)(-) (M = Ti(IV), Sn(IV)) metallaligands via their soft P donor sites to C(2)-symmetric PdBr(2) units gives exclusively pentametallic [M(2)Pd(3)Br(6)L(6)](4)(-) (M = Ti, Sn) clusters. These clusters have been fully characterized by spectral and X-ray structural data as C(3h) mesocates with Cs(+) or protonated 1,4-diazabicyclo[2.2.2]octane (DABCO.H(+)) cations incorporated into deep molecular clefts. Exclusive formation of this type of supramolecular species is sensitive to the nature of the counterions. Alkali cations such as K(+), Rb(+), and Cs(+) give high-yield formation of the respective clusters while NEt(3)H(+) and NMe(4)(+) yield none of the desired products. Extension of the aufbau assembly to produce related [M(2)Pd(3)Cl(6)L(6)](4)(-), [M(2)Pd(3)I(6)L(6)](4)(-), and [M(2)Cr(3)(CO)(12)L(6)](4)(-) (M = Ti, Sn) clusters has also been realized. In addition to this aufbau approach, self-assembly of several of these [M(2)Pd(3)Br(6)L(6)](4)(-) clusters from all eleven components (two M(IV), three PdBr(2), six H(2)L) was also accomplished under appropriate reaction conditions.     

Synthesis and characterisation of new titanium amino-alkoxides: precursors for the formation of TiO2 materials

Reaction of the amino-alkoxides HOCH(CH(2)NMe(2))(2) (Hbdmap) and HOC(CH(2)NMe(2))(3) (Htdmap) with [Ti(OR)(4)] yields a series of heteroleptic titanium alkoxides [Ti(OR)(4-n)(L)(n)] (L = bdmap, tdmap). Substitution of the monodentate alkoxide with the chelating alkoxides becomes progressively more difficult, with homogeneous products being obtained only for n = 1, 2. The structure of [Ti(OEt)(3)(bdmap)](2), a mu-OEt bridged dimer, has been determined. Hydrolysis of [Ti(OR)(2)(L)(2)], by adventitious moisture affords the dimeric oxo-alkoxides [Ti(O)(L)(2)](2), both of which have been characterised crystallographically. These two compounds have also been prepared by reaction of [Ti(NMe(2))(2)(L)(2)] with the hydrated metal salts [Zn(acac)(2).2H(2)O] and [Zn(OAc)(2).2H(2)O] using the intrinsic water molecules in these salts to react with the labile amido groups, though the former also produces Me(Me(2)N)C=C(H)C(O)Me from reaction of liberated HNMe(2) with the coordinated acac ligand, while the latter also affords the ligand exchange product [Zn(OAc)(bdmap)]. In neither case does the free dimethylamino group of [Ti(O)(L)(2)](2) coordinate a second metal. The dimeric structure of [Zn(OAc)(bdmap)](2) has been established, and the structure of the tetrameric oxo-alkoxide [Ti(O)(OPr(i))(OCH(2)CH(2)NMe(2))](4) is reported for comparison with others in this study. [Ti(OEt)(3)(bdmap)](2) has been used as a precursor in AACVD (Aerosol-Assisted Chemical Vapour Deposition) to generate amorphous TiO(2) films on glass at 440 degrees C, and TiO(2)@C nanoparticles of approximate diameter 350 nm with a carbon coating of width ca. 75 nm on heating in a sealed container at 700 degrees C.     

Mechanism of photoinduced superhydrophilicity on the TiO2 photocatalyst surface

The physicochemical properties of the H(2)O molecules adsorbed on TiO(2) surfaces during UV light irradiation were fully investigated by near-infrared (NIR) absorption spectroscopy. It was found that the H(2)O molecules adsorbed on the TiO(2) surfaces desorb during UV light irradiation by the heating effect of the light source. Since the amount of the H(2)O adsorbed on the TiO(2) surfaces decreased, the distribution of the hydrogen bonds within the H(2)O molecules decreased, resulting in a decrease in the surface tension of the H(2)O clusters. The decrease in the surface tension of H(2)O under UV light irradiation was found to be one of the most important driving forces in which the H(2)O clusters on the TiO(2) surface spread out thermodynamically, forming H(2)O thin layers. The partial elimination of the hydrocarbons from the TiO(2) surface by the photocatalytic complete oxidation was seen to be the other important factor, providing free spaces on the surface where the H(2)O clusters could spill over and spread out to form the thin H(2)O layers. Moreover, the temperature changes of the TiO(2) powder samples during UV light irradiation were found to show a good correspondence with the changes in the contact angle of the H(2)O droplets on the TiO(2) thin film surfaces. Especially the time scale for the hydrophilic conversion on the TiO(2) surfaces under UV light irradiation was in good agreement with the decrease in the amount of H(2)O molecules adsorbed on the TiO(2) surfaces but not the amount of the hydrocarbons eliminated by the photocatalytic oxidation reactions, showing that the adsorption and desorption of H(2)O molecules are generally quite sensitive to the temperature changes of solid surfaces.