流动注射在线液—液萃取原子吸收光谱法测定生物样品中的铅

本文利用所设计的一种新型流动注射液－液萃取重力分相器，建立了流动注射液溶剂萃取原子吸收光谱法测定铅的新方法，详细地研究了流动注射在线萃取的实验条件及流路系统，方法的精密度和检出限分别为２．５％（ｎ＝１１）和２．８μｇ／Ｌ（ｋ＝３）。用拟定的方法测定了峰蛹，粮食等生物样品中的铅，结果与参考值相吻合。     

连续流动液─液萃取石墨炉原子吸收分析系统的设计及其性能

求文研究了在线液一液萃取石墨炉原子吸收分析技术，设计了一种半自动萃取流路系统及其与石墨炉的接口装置．采用一步萃取操作，比较了直接水相测定和萃取测定ＡＵ和Ｃｄ的结果，表明该流路系统性能较好。在萃取测定中，ＡＵ和Ｃｄ的检出限分别为０．０７７和０．０５５ｎｇ／ｍＬ；精密度为Ａｕ４．１％（５．５ｎｇ／ｍＬ）和Ｃｄ４．９％（０．２５ｎｇ／ｍＬ）标准样品分析结果与推荐值吻合，采样频率为２０—３０／ｈ．     

重力分相器用于流动注射—液—液萃取—原子吸收光谱法间接测定硝酸根

应用一种新型的四通道重力分相器，通过实验，选定了流动注射－液－液萃取－原子吸收间接硝酸根的最佳力学待人接物仪器参数，方法的精密度（ＲＳＤ）和检出限分别为１．９％和０．０２８ｍｇ／Ｌ，测定速度为２５样／ｈ，用本系统水样中的硝酸根和亚硝酸根，标准加入顺收率为１００－１１０％。     

流动注射在线萃取—石墨炉原子吸收光谱法测定地质样品痕量钯

应用流动注射在线萃取技术将ＰｄＣｌ＾２－６萃入２－巯基苯并噻唑－甲基异丁基酮直接进行石墨炉原子吸收测定。研究了流动注射在线萃取－石墨炉原子吸收光谱法测定地质样品中钯的实验条件、流路参数等。采样速率为２０样／ｈ,ＲＳＤ（ｎ＝１０）为４．８％,测定Ｐｄ的特征质量为２．６＊１０＾－１１。     

高效液相色谱法测定烟草料液中的糖、甘油和丙二醇

研究了用高效液相色谱法测定烟草料液样品中糖、甘油和丙二醇的方法。烟草料液用Sep-Park-C18固相萃取小柱预分离，以Waters Surar-Pakl钙型阳离子交换柱为固定相，0．05g/L EDTA钙钠水溶液为流动相，示差折光仪为检测器，一次进样测定烟草料液样品中的糖、甘油和丙二醇。线性范围为0．005－5g/L,检测限在1．5－2．5mg/L之间，相对标准偏差为0．89％－1．3％，标准回收率在96．0％－103％之间。方法用于几种烟草料液样品测定，结果令人满意。     

一种在线液—液萃取微型多用分相器的设计和应用：IV.流动注射液— …

设计了在线液－液萃取多用重分布相器及相应流动注射流路系统与ＩＣＰ－ＡＥＳ法联用。具有良好的分析性能，通过对矿石中某些重稀土元素在硝酸介质中被ＴＢＰ萃取的应用研究表明钇，镱，铒的检出限（３σ）分别为６．８ｎｇ／ｍＬ，０．２ｎｇ／ｍＬ和１．５ｎｇ／ｍＬ，精密度（ＲＳＤ％）分别为０．２４，０．４７和１．８，进样频率为２５－３０个／ｈ。     

液液萃取-气相色谱法测定缓释尿素中吡唑类硝化抑制剂

建立了一种快速测定缓释尿素中吡唑类硝化抑制剂（DL-1）的方法-液液萃取．气相色谱法。从5种有机溶剂中选出三氯甲烷作为DL-1的萃取剂,并采用盐析的方法将革取率提高。本文采用内标法,通过SE30柱,氢火焰离子化检测器（FID）定量检测三氯甲烷萃取相中DL-1。萃取率为96．08％～98．10％,平均萃取率为97．33％;回收率为87．96％～90．54％;RSD为0．089％～1．6％,本法测定缓释尿素中的DL-1含量快速、灵敏,便于产品的质量监控。     

一种在线液-液萃取微型多用分相器的设计和应用 Ⅳ.流动注射液-液萃取电感耦合等离子体原子发射光谱法测定矿石中稀土元素

设计了在线液－液萃取多用重力分相器及相应流动注射流路系统与ＩＣＰ－ＡＥＳ法联用，具有良好的分析性能．通过对矿石中某些重稀土元素在硝酸介质中被ＴＢＰ萃取的应用研究表明钇、镱、铒的检出限（３σ）分别为：６．８ｎｇ／ｍＬ、０．２ｎｇ／ｍＬ和１．５ｎｇ／ｍＬ．精密度（ＲＳＤ％）分别为０．２４、０．４７和１．８．进样频率为２５～３０个／ｈ．     

在线液膜萃取富集流动注射分光光度法测定水中挥发酚

选用无毒性的磷酸三丁酯为流动载体，煤油为膜溶剂的液膜萃取体系，建立了液膜在线萃取富集流动注射分光光度法测定水中挥发酚的新方法。对实验条件进行了优化，在最优条件下，方法的检出限为0．0007mg/L；线性范围为0．001～0．01mg/L。应用于自来水及河水中挥发酚的检测，结果满意。     

一种新的FI－液液萃取重力分相器的设计及其分析性能研究

本文设计了一种适用于各种萃取体系并能与原子光谱仪和分光光度计联用的ＦＩ液液萃取重力分相器．用该分相器分别研究了ＦＩ－ＭＩＢＫ萃取－ＦＡＡＳ测定金和ＦＩ－ＣＣｌ４萃取－分光光度法测定碘的分析性能．结果表明，该分相器操作简单，分相完全，是一种较理想的重力分相器     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.