Ultrasonic Preparation of Hierarchical Graphene‐Oxide/TiO2 Composite Microspheres for Efficient Photocatalytic Hydrogen Production

Hierarchical graphene oxide (GO)‐TiO₂ composite microspheres with different GO/TiO₂ mass ratios were successfully prepared by mixing GO and TiO₂ microspheres under ultrasonic conditions. Ultrasonication helped the GO and TiO₂ microsphere to uniformly mix on the microscale. The results showed that the GO‐TiO₂ composites that were prepared by ultrasonic mixing exhibited significantly higher hydrogen‐evolution rates than those that were synthesized by simple mechanical grinding, owing to synergetic effects, including enhanced light absorption and scattering, as well as improved interfacial charge transfer because of the excellent contact between the GO sheets and TiO₂ microspheres. In addition, GO‐TiO₂‐3 (3 wt. % GO) showed the highest hydrogen‐generation rate (305.6 μmol h^?), which was about 13 and 3.3‐times higher than those of TiO₂ microsphere and GO‐P25 (with 3 wt. % GO), respectively. Finally, a tentative mechanism for hydrogen production is proposed and supported by photoluminescence and transient photocurrent measurements. This work highlights the potential applications of GO‐TiO₂ composite microspheres in the field of clean‐energy production.     

Preparation, characterization, and infrared emissivity property of optically active polyurethane/TiO2/SiO2 multilayered microspheres

Optically active polyurethane/titania/silica (LPU/TiO₂/SiO₂) multilayered core–shell composite microspheres were prepared by the combination of titania deposition on the surface of silica spheres and subsequent polymer grafting. LPU/TiO₂/SiO₂ was characterized by FT-IR, UV–vis spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), SEM and TEM, and the infrared emissivity value (8–14 μm) was investigated in addition. The results indicated that titania and polyurethane had been successfully coated onto the surfaces of silica microspheres. LPU/TiO₂/SiO₂ exhibited clearly multilayered core–shell construction. The infrared emissivity values reduced along with the increase of covering layers thus proved that the interfacial interactions had direct influence on the infrared emissivity. Besides, LPU/TiO₂/SiO₂ multilayered microspheres based on the optically active polyurethane took advantages of the orderly secondary structure and strengthened interfacial synergistic actions. Consequently, it possessed the lowest infrared emissivity value.     

Preparation and characterization of poly(methyl methacrylate)/titanium oxide composite particles

Before polymerization, the introduction of double bonds onto the surface of the TiO₂ particles was achieved by the treatment of the TiO₂ particles with the silane-coupling agent. Via in-situ emulsion polymerization, the poly(methyl methacrylate) (PMMA)/titanium oxide (TiO₂) composite particles were prepared by graft polymerization of MMA from the surface of the modified TiO₂ particles. The structure of the obtained PMMA/TiO₂ composite particles was characterized using fourier transform infrared spectra (FT-IR), thermo-gravimetric analysis (TGA), differential scanning calorimetry (DSC) and size excluding chromatography (SEC). The morphology of the obtained PMMA/TiO₂ composite particles was observed by transmission electron microscope (TEM). The results of FT-IR and TGA measurements show that PMMA is successfully grafted from the surface of the TiO₂ particles and that the percentage of grafting and the grafting efficiency can reach 208.3% and 96.6%, respectively. At the same time, the TGA and DSC measurements indicate an enhancement of thermal stability. TEM images demonstrate a better dispersion of the TiO₂ particles in the composite latex. In addition, UV-visible absorption measurements show that the PMMA/TiO₂ composite particles can absorb over 95% UV light at 210–400 nm wavelength.     

Photocatalytic activities of poly(methyl methacrylate)/titanium dioxide nanofiber mat

This study aimed to evaluate the photocatalytic activities of poly(methyl methacrylate) (PMMA)/titanium dioxide (TiO₂) nanofiber mat. TiO₂ nanoparticles in crystal phase were first prepared by sol-gel process and then PMMA/TiO₂ nanofiber mat was prepared through electrospinning. The composite (PMMA/TiO₂) nanofiber mat was compared with that of pure PMMA nanofiber mat through performing FTIR and UV-Vis spectroscopy, scanning electron microscopy, thermogravimetric analysis, weight loss and water contact angle measurements. The photocatalytic activity of PMMA/TiO₂ nanofiber mat was evaluated by investigating both the photocatalytic decomposition of a model dye, methylene blue, and photocatalytic degradation of the composite nanofiber mat in the ambient air under ultraviolet light irradiation.     

SiO_2纳米粒子对PMMA/PS共混物共连续相结构退火粗化过程的影响

考察了亲水性纳米SiO2粒子的加入对聚甲基丙烯酸甲酯/聚苯乙烯(PMMA/PS)共混体系的共连续相结构在静态高温退火时形态稳定性的影响,发现静态高温退火条件下,填充体系共连续组成范围变窄幅度较小、特征结构尺寸的粗化速率减慢.流变测试表明纳米SiO2粒子加入之后PMMA/PS共混体系的黏弹性显著提高,从而能减缓破坏构成共连续相结构的纤维断裂或回缩等松弛过程的速率,有效地抑制PMMA/PS共混体系的共连续相结构粗化进程,提高相结构的稳定性.根据现有的两种粗化理论的定性分析表明,在高填充量的共混体系中,加入纳米SiO2粒子导致共混体系的黏弹性的显著改变是影响PMMA/PS共混体系在静态高温退火时共连续相结构粗化速率的主要因素,相对而言界面张力的变化对共连续相结构在静态高温退火时的粗化速率影响则应该较小.     

Nanosized anatase titanium dioxide loaded porous carbon nanofiber webs as anode materials for lithium-ion batteries

Nanosized anatase titanium dioxide loaded porous carbon nanofibers (TiO₂/PCNFs) were prepared from electrospun TiO(OAc)₂/PAN/PMMA composite precursor fibers with different amount of PMMA porogen, which were sequentially heat-treated in different environments. Electrochemical measurement results show that these as-prepared TiO₂/PCNFs present higher cyclic reversible capacity than the TiO₂/CNFs counterpart (without PMMA porogen in its precursor fibers). Among the as-prepared TiO₂/PCNFs samples, the representative TiO₂/PCNFs (the mass ratio of PAN to PMMA is 3:1) exhibits the best high-rate performance with a high stable capacity retention about 200 mAhg^{− 1} at a current density as high as 800 mAg^{− 1}. This novel TiO₂/PCNFs composite material opens up a promising application in high-power lithium-ion batteries.     

Preparation of uniform rhodamine B-doped SiO2/TiO2 composite microspheres

Uniform rhodamine B (RB)-doped SiO₂/TiO₂ composite microspheres with catalytic and fluorescent properties were prepared by an easy and economical method in this paper. The composite microspheres were built up with well-dispersed silica particles as the cores, RB as both the doped agent and stabilizer, and the TiO₂ shells were obtained through the hydrolysis of TiCl₄ in water bath. The morphology and structure of the particles were characterized by scanning electron microscopy (SEM) and X-ray powder diffraction (XRD). The characterization results indicate that composite particles are all in spherical shape and have a narrow size distribution. The composite particles calcined above 500 °C reveal clear crystalline reflection peaks of the rutile TiO₂ which exhibits well catalytic property. The photocatalytic experiment was carried out in order to examine the catalytic property of composite microspheres. The fluorescent property of particles was also investigated. Dye-leakage test indicates that RB molecules entrapped in the composite particles by this method are stable inside the particles.     

Effect of graft polymer on the formation of micron-sized,monodisperse, "onion-like" alternately multilayered poly(methyl methacrylate)/polystyrene composite particles by reconstruction of morphology with the solvent-absorbing/releasing method

Some factors contributing to the formation of an alternately multilayered structure of micron-sized, monodisperse poly(methyl methacrylate) (PMMA)/polystyrene (PS) (1/1, w/w) composite particles by reconstruction of the morphology with the solvent-absorbing/releasing method (SARM) were discussed. The original composite particles, which were produced by seeded dispersion polymerization (SDP) of styrene, had a core–shell structure. When PS/PMMA (1/1, w/w) composite particles produced by SDP of methyl methacrylate were treated by the SARM with toluene, the reconstructed morphology of the composite particles was not the multilayered structure but a hemisphere (or core–shell). The PS/PMMA composite particle contained less than 10 wt% PMMA- g-PS. On the other hand, the PMMA/PS composite particles contained about 40 wt% graft polymer. The graft polymer would exist at the interfaces of the alternate multilayers and decrease their interfacial energy. This was the main reason why the alternately multilayered structure was constructed by the SARM, though the total interfacial area between PMMA and PS layers in the multilayered particle is much larger than that of the hemisphere (or core–shell).     

PREPARATION AND PROPERTIES OF SPAES-TiO_2 HYBRID MEMBRANES FOR DIRECT METHANOL FUEL CELL

Sulfonated poly(arylene ether sulfone)(SPAES) copolymer with degree of sulfonation of 1.0 was synthesized and characterized.A series of SPAES-TiO_2 hybrid membranes with various contents of nano-sized TiO_2 particles were prepared and characterized through sol-gel reactions.Scanning electron microscopy(SEM) images indicated the TiO_2 particles were well dispersed within polymer matrix.These composite membranes were evaluated for proton exchange membranes(PEMs) in direct methanol fuel cell(DMFC).These mem...     

Studies on UV‐stability of poly(MMA‐co‐M12‐co‐BPMA)/TiO2composite particles prepared by ultrasonically initiated emulsion polymerization

In this paper, poly(methyl methacrylate‐co‐sodium sulfopropyl lauryl maleate‐co‐2‐hydroxy‐4‐(3‐methacryloxy‐2‐hydroxylpropoxy) benzophenone)/TiO₂ (i.e., poly(MMA‐co‐M12‐co‐BPMA)/TiO₂) composite particles were prepared by ultrasonically initiated emulsion polymerization. To study the dispersion and UV‐stability of the composite particles, laser diffraction particle size analyzer (LDPSA), ultraviolet‐visible absorption spectroscopy (UV‐vis), UV‐vis diffuse reflectance spectroscopy (DRS), differential scanning calorimeter (DSC), and the weight loss measurement were used. The results indicate that the dispersion of the poly(MMA‐co‐M12‐co‐BPMA)/TiO₂ composite particles prepared by ultrasonically initiated emulsion polymerization is good. And the composite particles can absorb UV light; the ultraviolet absorption strength of poly(MMA‐co‐M12‐co‐BPMA) grafted onto the surface of TiO₂ has not changed after UV irradiation while that of PMMA changed significantly. The UV absorption strength, weight loss, and Tg changes are in the order PMMA> poly(MMA‐co‐M12‐co‐BPMA) >PMMA grafted onto TiO₂> poly(MMA‐co‐M12‐co‐BPMA) grafted onto TiO₂. These results show that the ultrasonically initiated emulsion polymerization will enhance the UV stability of composite particles, and the UV‐stability of PMMA can be enhanced by the introduction of the organic UV‐stabilizer BPMA and the inorganic UV‐stabilizer titanium dioxide into the PMMA chains by covalent bond, and the effect of the BPMA and the TiO₂ used together is better than that used, respectively. Copyright © 2009 John Wiley & Sons, Ltd.     

TiO2掺杂调控聚苯乙烯微球折射率及胶体光子晶体结构色

胶体光子晶体由于其可调变的结构色在绿色印刷、印染等领域备受关注,而其光子带隙的宽度和位置由光子晶体的晶格参数(晶面间距,通常受胶体微球尺寸影响)和介质的折射率决定。现有人工胶体光子晶体主要基于SiO_2和高分子(如聚苯乙烯(PS)等)微球的组装制备,由于胶体微球材质种类有限,折射率调控受限,因而目前调控胶体光子晶体结构色主要靠改变胶体微球的尺寸来实现。本文首先制备高折射率(2.6)的TiO_2纳米晶,在乳液聚合制备单分散的PS(折射率1.6)微球过程中,将所制备的TiO_2纳米晶掺杂于PS微球中,通过TiO_2的掺杂量有效调控胶体微球的折射率,进而实现胶体光子晶体的结构色调控。以多色胶体光子晶体微球的水溶液为墨水,采用彩色喷墨打印技术打印了电脑设计的光子晶体彩画。本文发展的光子晶体结构色调控新技术拓展了胶体光子晶体的应用。     

Synthesis and electrorheological characteristics of sea urchin-like TiO<Subscript>2</Subscript> hollow spheres

TiO₂ hollow microspheres with sea urchin-like hierarchical architectures were synthesized by a simple hydrothermal method. The as-synthesized hollow microspheres with hierarchical architectures consisting of many rhombic building units exhibit high specific surface area. Electrorheological (ER) properties of hierarchical hollow TiO₂-based suspension were investigated under steady and oscillatory shear. The hollow TiO₂-based suspensions show much higher yield stress and elasticity than pure TiO₂ suspension at the same electric field strength. This phenomenon was elucidated well in view of their dielectric spectra analysis. The sea urchin-like architectures result in stronger interfacial polarization of hollow TiO₂ suspension upon an electric field, showing higher ER activity. Also, hollow interiors of TiO₂ particles increase the long-term stability of suspensions and further merit the ER effect.     

聚甲基丙烯酸甲酯/聚甲基丙烯酸-2-羟乙酯复合微球的合成及药物吸放性能

采用在甲基丙烯酸甲酯（MMA）悬浮聚合过程中滴加甲基丙烯酸-2-羟乙酯（HEMA）乳液聚合组分的悬浮-乳液耦合聚合方法,制备了大粒径聚甲基丙烯酸甲酯／聚甲基丙烯酸-2-羟乙酯（PMMA／PHEMA）复合微球。PMMA／PHEMA复合微球表面以HEMA乳液聚合物为主,且具有微孔结构。PMMA／PHEMA复合微球在水和苄醇中的平衡溶胀率大于PMMA微球。PMMA／PHEMA复合微球48h异丁苯丙酸负载百分比为35．6％,PMMA为27．6％。在磷酸盐缓冲液中释放时间达到360h,释放量占负载总量的82％;而PMMA微球的释放时间为216h,释放量仅占负载总量的60％。     

Preparation and characterization of SiO2/TiO2 composite microspheres with microporous SiO2 core/mesoporous TiO2 shell

SiO₂/TiO₂ composite microspheres with microporous SiO₂ core/mesoporous TiO₂ shell structures were prepared by hydrolysis of titanium tetrabutylorthotitanate (TTBT) in the presence of microporous silica microspheres using hydroxypropyl cellulose (HPC) as a surface esterification agent and porous template, and then dried and calcined at different temperatures. The as-prepared products were characterized with differential thermal analysis and thermogravimetric (DTA/TG), scanning electron microscopy (SEM), X-ray diffraction (XRD), nitrogen adsorption. The results showed that composite particles were about 1.8 μm in diameter, and had a spherical morphology and a narrow size distribution. Uniform mesoporous titania coatings on the surfaces of microporous silica microspheres could be obtained by adjusting the HPC concentration to an optimal concentration of about 3.2 mmol L⁻¹. The anatase and rutile phase in the SiO₂/TiO₂ composite microspheres began to form at 700 and 900 °C, respectively. At 700 °C, the specific surface area and pore volume of the SiO₂/TiO₂ composite microspheres were 552 and 0.652 mL g⁻¹, respectively. However, at 900 °C, the specific surface area and pore volume significantly decreased due to the phase transformation from anatase to rutile.     

Tribological behavior of polyurethane-based composite coating reinforced with TiO2 nanotubes

The unmodified and hexamethylene diisocyanate (HDI) modified TiO₂ nanotubes, were used for fabricating TiO₂ nanotubes (TiNTs)/polyurethane (PU) composite coating. The effects of applied load and sliding speed on the tribological behavior of the composite coating were investigated using a block-on-ring wear tester. Compared to the TiO₂ nanotubes filled PU composite coating, the HDI modified TiO₂ nanotubes (TiNTs-HDI) filled one had the lower friction coefficient and higher wear life under various applied loads and sliding speed. Scanning electron microscope (SEM) investigation showed that the TiNTs-HDI filled PU coating had smooth worn surface under given applied load and sliding speed, and a continuous and uniform transfer film formed on the surface of the counterpart ring, which helped to reduce the wear of the coating. The improvement in the tribological properties of TiNTs-HDI/PU composite coating might due to an improvement in interfacial adhesion between TiNTs and PU after HDI treatment. The strong interfacial coupling of the composite coating made TiNTs-HDI not easy to detach from the PU matrix, and prevented the rubbing-off of PU composite coating, accordingly improved the friction and wear properties of the composite coating.     

Influence of surface modified TiO2 nanoparticles by gallates on the properties of PMMA/TiO2 nanocomposites

Nanocomposites based on poly(methyl methacrylate) (PMMA) and TiO₂ nanoparticles were synthesized by in situ radical polymerization of MMA in solution. The surface of TiO₂ nanoparticles was modified with four gallic acid esters (octyl, decyl, lauryl and cetyl gallate). The content of gallates present on the surface of TiO₂ was calculated from the TGA results. The influence of length of hydrophobic tail of amphiphilic alkyl gallates on dispersability of surface modified TiO₂ nanoparticles in PMMA matrix, the molecular weight and glass transition temperature of PMMA, as well as the thermal stability of the prepared PMMA/TiO₂ nanocomposites in nitrogen and air was investigated. The influence of content of TiO₂ nanoparticles on the properties of these nanocomposites was also examined. The formation of a charge transfer complex between the surface Ti atoms and the gallates was confirmed by FTIR and UV spectroscopy. TEM micrographs of the PMMA/TiO₂ nanocomposites revealed that degree of TiO₂ aggregation can be significantly lowered by increasing the length of aliphatic part of the used gallates. The molecular weight of PMMA slightly decreases with the increase of TiO₂ content, indicating that used TiO₂ nanoparticles act as radical scavengers during the polymerization of MMA. The presence of surface modified TiO₂ nanoparticles do not have an influence on the mobility of PMMA chain segments leading to the same values of glass transition temperature for all investigated samples. Thermal and thermo-oxidative stability of the PMMA matrix are improved by introducing TiO₂ nanoparticles modified with gallates.     

Synthesis of nano-ZnO/poly(methyl methacrylate) composite microsphere through emulsion polymerization and its UV-shielding property

Nano-ZnO/poly(methyl methacrylate)(PMMA) composite latex microspheres were synthesized by in-site emulsion polymerization. The interfacial compatibility between nano-ZnO particles and PMMA were improved by treating the surface of nano-ZnO particles hydrophobically using methacryloxypropyltrimethoxysilane (MPTMS). TEM indicated that nano-ZnO particles present in nanosphere and have been encapsulated in the PMMA phase. FT-IR confirmed that MPTMS reacted with the nano-ZnO particle and copolymerized with MMA. It was clearly found from SEM that ZnO nanoparticles can be homogeneously dispersed in the PVC matrix. The absorbance spectrum of the nanocomposite polymer suggested that increasing the amount of nano-ZnO in composite particles could enhance the UV-shielding properties of the polymers. The nano-ZnO/PMMA composite particle could eliminate aggregation of ZnO nanoparticle and improve its compatibility with organic polymer. This means that the composite particles can be widely applied in lots of fields.     

Incorporation of titanium dioxide particles into polymer matrix using block copolymer micelles for fabrication of high refractive and transparent organic–inorganic hybrid materials

We report a novel strategy for incorporation of titanium dioxide (TiO₂) particles into poly(methyl methacrylate) (PMMA) to exploit high refractive and transparent organic–inorganic hybrid materials. Formation of TiO₂ particles of around 20 nm was conducted within hydrophilic core of block copolymer micelles of poly(methyl methacrylate‐block‐acrylic acid) (PMMA‐b‐PAA) in toluene via sol–gel process from titanium isopropoxide and hydrochloric acid. Subsequently, incorporation of TiO₂ particles into PMMA matrix was carried out by casting toluene solution of TiO₂ precursor‐loaded copolymer micelles, prepared from PMMA₃₅₀‐b‐PAA₉₃ and the precursor of mole ratio Ti⁴⁺/carboxyl 4.0, and PMMA. Hybrid films of TiO₂/PMMA exhibited high transparency to achieve transmission over 87% at 500 nm at 30 wt % of TiO₂ content. The refractive index of resulting hybrid films at 633 nm linearly increased with TiO₂ content to attain 1.579 at 30 wt % TiO₂, which was 0.1 higher than that of PMMA. Cross‐sectional transmission electron microscope images of TiO₂/PMMA hybrid films showed existence of TiO₂ clusters less than 100 nm, which were probably formed by aggregation or agglutination of TiO₂ particles during a drying process. It was also observed that decomposition temperature of the hybrid films elevated with increasing TiO₂ content. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Preparation of magnetic Fe3O4/TiO2/Ag composite microspheres with enhanced photocatalytic activity

The novel three-component Fe₃O₄/TiO₂/Ag composite mircospheres were prepared via a facile chemical deposition route. The Fe₃O₄/TiO₂ mircospheres were first prepared by the solvothermal method, and then Ag nanoparticles were anchored onto the out-layer of TiO₂ by the tyrosine-reduced method. The as-prepared magnetic Fe₃O₄/TiO₂/Ag composite mircospheres were applied as photocatalysis for the photocatalytic degradation of methylene blue. The results indicate that the photocatalytic activity of Fe₃O₄/TiO₂/Ag composite microspheres is superior to that of Fe₃O₄/TiO₂ due to the dual effects of the enhanced light absorption and reduction of photoelectron–hole pair recombination in TiO₂ with the introduction of Ag NPs. Moreover, these magnetic Fe₃O₄/TiO₂/Ag composite microspheres can be completely removed from the dispersion with the help of magnetic separation and reused with little or no loss of catalytic activity.     

Development of mesoporous TiO2 microspheres with high specific surface area for selective enrichment of phosphopeptides by mass spectrometric analysis

In this study, mesoporous TiO₂ microspheres were synthesized by simple hydrothermal reaction, and successfully developed for phosphopeptides enrichment from both standard protein digestion and real biological sample such as rat brain tissue extract. The mesoporous TiO₂ microspheres (the diameter size of about 1.0 μm) obtained by simple hydrothermal method were found to have a specific surface area of 84.98 m²/g, which is much larger than smooth TiO₂ microspheres with same size. The surface area of mesoporous TiO₂ microspheres is almost two times of commercial TiO₂ nanoparticle (a diameter of 90 nm). Using standard proteins digestion and real biological samples, the superior selectivity and capacity of mesoporous TiO₂ microspheres for the enrichment of phosphorylated peptides than that of commercial TiO₂ nanoparticles and TiO₂ microspheres was also observed. It has been demonstrated that mesoporous TiO₂ microspheres have powerful potential for selective enrichment of phosphorylated peptides. Moreover, the preparation of the mesoporous TiO₂ microspheres obtained by the hydrothermal reaction is easy, simple and low-cost. These mesoporous TiO₂ microspheres with the ability of large scale synthesis can widely be applied for phosphorylated proteomic research.