Luminescence and selective heat radiation of Yb<Subscript>2</Subscript>O<Subscript>3</Subscript> upon the resonant and thermal laser excitation

Yb₂O₃ polycrystals with a size of up to 10 mm are synthesized using the sintering and melting of the ultrapure Yb₂O₃ powders by the CO₂-laser radiation with the power P _L ≤ 100 W at the wavelength λ = 10.6 μm at the melting point T _m = 2703 K, forming due to surface tension in melt, and crystallization in air. The analysis of the polycrystal microstructure using the methods of optical and electron microscopy and X- ray diffractometry shows that perfect oxide crystallites are formed in the course of crystallization after melting-through. The transformation of the luminescence and selective heat radiation (SHR) spectra of the Yb₂O₃ polycrystals is studied under the resonant excitation at λ ≈ 975 nm using a laser diode and the laser heating at the wavelength λ = 10.6 μm. When the resonant excitation power of the Yb³⁺ ions increases from 0.15 to 4.5 W, the Stokes luminescence of the Yb₂O₃ polycrystals is sequentially transformed into SHR and the thermal radiation of the crystal lattice. The transformation of the emission spectra of the Yb₂O₃ polycrystals with an increase in the laser heating intensity by about four orders of magnitude can be represented as the low-temperature heat radiation, spectral burst of the thermodynamically nonequilibrium SHR of the Yb³⁺ ions, and the high-temperature radiation of the crystal lattice. The temperature dependence of the luminescence spectra and SHR of the Yb₂O₃ polycrystals on the intensity of the laser and laser-thermal excitation and the concentration quenching of the Yb³⁺ luminescence in oxides indicate the key role of the interaction of the f-electron shell of the Yb³⁺ ions with the natural oscillations of the crystal lattice in the processes of the multiphonon excitation and nonradiative (multiphonon) and radiative (vibronic) relaxation.     

Initiation of combustion of a methane-air mixture in a supersonic flow behind a shock wave during laser excitation of O<Subscript>2</Subscript> molecules

The possibility of initiating detonation of CH₄ + air in a supersonic flow behind an oblique shock wave under the exposure of the mixture to laser radiation with wavelengths λ_I=1.268 μm and 762 nm is analyzed. It is shown that this irradiation leads to excitation of O₂ molecules to the a ¹Δ_g and b ¹Σ _g ⁺ states, which intensifies the chain mechanism of combustion of CH₄/O₂ (air) mixtures. Even for a small value of the laser radiation energy absorbed by an O₂ molecule (∼0.05–0.1 eV), detonation mode of combustion in a poorly inflammable mixture such as CH₄/air can be realized at a distance of only 1 m from the primary shock wave front for relatively small values of temperature (∼1100 K) behind the front under atmospheric pressure.     

Electronic excitation energy transfer between dye molecules in H<Subscript>2</Subscript>O and D<Subscript>2</Subscript>O solutions in the micellar phase

Processes of electronic excitation energy transfer (EEET) in H₂O+D₂O solutions within reversed micelles with different degrees of hydration were studied. It is ascertained that the structure of solutions forms a cluster distribution of interacting molecules having a fractal dimensionality. As a result, in regions with a locally high concentration of the dye molecules, an increase in the EEET efficiency is observed. Solubilization by reversed micelles leads to destruction of the cluster structure of the water system, with the dependence of the EEET efficiency on the degree of hydration being nonmonotonic. As the degree of hydration increases, the inhomogeneities of the structure inherent in bulk water are restored.     

Spectroscopy and energy balance of the Nd<Subscript>2</Subscript>O<Subscript>3</Subscript> selective emission upon the laser thermal excitation

The laser thermal melting of powders is used to fabricate selective emitters (SEs) that represent Nd₂O₃ and Y₂O₃-Nd₂O₃ polycrystals on quartz holders. The SEs are stable under atmospheric conditions upon multiple heating by laser radiation up to the melting point. The spectral shape and integral intensity of the selective heat radiation (SHR) of the Nd₂O₃ microcrystalline powder and the Nd₂O₃ and Y₂O₃-Nd₂O₃ polycrystals are experimentally studied in the near-IR and visible spectral ranges versus the intensity of the laser thermal excitation at a wavelength of 10.6 μm in comparison with the absorption and luminescence spectra of the YAG:Nd³⁺ and YAlO₃:Nd³⁺ single crystals. The SHR spectra are determined by the vibronic transitions between the electronic states ² G _7/2-⁴F_3/2 ⁴I_11/2 and ⁴I_9/2 of the Nd³⁺ ions that are thermally excited due to the multiphonon transitions from the ground state. The energy balance of the SE laser thermal heating is experimentally investigated. The coefficient of the laser energy conversion to the Nd³⁺ SHR is measured, and the emissivity of the SEs that can be used for the study of the thermophotovoltaic generators and the optical excitation of the laser-active media in the near-IR spectral range is estimated.     

Luminescence excitation in reactive molecular CO + O<Subscript>2</Subscript> collisions on the surface of Y<Subscript>2</Subscript>O<Subscript>3</Subscript>-Eu

It is shown that the CO + O₂ → CO₂ catalytic reaction on the surface of Y₂O₃-Eu may lead to electronic excitation of Eu³⁺ luminescence centers due to the chemical energy release. The luminescence observed allows one to study the interaction between molecular particles of ultralow (thermal) energies with surface by optical methods.     

Four-photon laser spectroscopy of low-frequency rotational resonances of H<Subscript>2</Subscript>O molecules in the liquid phase

A clearly pronounced structure of the Rayleigh wing consisting of a great number of components is measured in the range 0–100 cm^?1 using four-photon polarization spectroscopy. The features observed are compared with the calculated IR spectra of H₂O molecules in the gas phase taken from the HITRAN database. A good correlation between the frequency positions of the observed and calculated lines points to the possibility of hindered rotation of water molecules in liquid.     

Mechanism of propagation of the combustion front in a Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> + 2Al + 30% Al<Subscript>2</Subscript>O<Subscript>3</Subscript> mixture

The results of experiments on the combustion of a powdery Fe₂O₃-Al-Al₂O₃ mixture in an argon flow are reported. The process of combustion is perturbed by a pressure drop across the batch created by evacuating one of the end faces of the reaction cell. The effects of gasifiable additives (borax and soda) and a pressure drop on the combustion characteristics are studied. The results obtained are interpreted within the framework of the convection-conduction theory of combustion of heterogeneous condensed systems.     

Electronic energy transfer between dye molecules in structured solutions of H<Subscript>2</Subscript>O and D<Subscript>2</Subscript>O

The structure of H₂O+D₂O solutions was studied by correlation spectroscopy of scattered light. The correlation function and size of scatterers were both found to depend nonmonotonically on the D₂O concentration in the H₂O+D₂O mixture. Processes of transfer of electronic excitation energy between dye molecules of different types in H₂O+D₂O solutions were studied. The efficiency of these processes was found to depend extremally on the concentration of the components of the solution. A fractal distribution of the interacting dye molecules is ascertained from the experimental data. The dependence of the fractal dimensionality of the dye solutions on the D₂O concentration in the D₂O+H₂O mixture is determined.     

Synthesis and characterization of platinum nano sized particles by laser ablation in C<Subscript>2</Subscript>H<Subscript>6</Subscript>O<Subscript>2</Subscript> solution

Platinum nano sized particles (Pt NPs) are superior catalysts for many intentions, such as glucose sensors, cancer therapy, gas sensors, etc. Here, Pt NPs were produced by pulsed laser ablation in C₂H₆O₂ solution using Q-switched Nd:YAG laser, for the first time. Then, the influence of the laser fluence during synthesis of them was investigated; and they were characterized by UV–vis spectroscopy, TEM, FE-SEM, XRD, FT-IR, and Raman spectroscopy. The results showed that with increasing laser fluence, the mean particle size of the spherical NPs enhanced. Meanwhile, they had a polycrystalline cubic structure. Correspondingly, the plasmon peak position of generated NPs in the absorption spectra shifted from 257 to 266 nm, with a rise of laser fluence. The IR and Raman spectroscopy was used to achieve the information about the surface state of Pt NPs. We propose that the optimum adjusted laser fluence is an important factor to increase the ablation efficiency.     

Oxidation of hydrogen sulfide and corrosion of stainless steel in gas mixtures containing H<Subscript>2</Subscript>S,O<Subscript>2</Subscript>, H<Subscript>2</Subscript>O,and CO<Subscript>2</Subscript>

The composition of volatile and solid products of oxidation of hydrogen sulfide and stainless steel in gas mixtures containing H₂S, O₂, H₂O, and CO₂ has been determined using mass spectrometry, x-ray diffraction analysis, and scanning electron microscopy. It has been shown that holding an H₂S–O₂ mixture at 301 K results in prevailing formation of elemental sulfur and iron sulfides in the form of porous hygroscopic crust on the reactor wall surface. Formation of gas-phase sulfur causes self-acceleration of the oxidation of hydrogen sulfide; the resulting water triggers corrosion of the reactor wall. Heating of the resulting sulfur-sulfide crust in O₂ medium is accompanied by formation of SO₂ and heat release at T > 508 K. After heating of the H₂S–CO₂ mixture to 615 K, H₂ and COS were found in the volatile reactants; no noticeable corrosion of the reactor wall has been detected. It has been established that addition of O₂ to the H₂S–CO₂ mixture and its heating to 673 K leads to formation of ferrous sulfates. The mechanisms of the observed processes are discussed.     

H<Subscript>2</Subscript>O<Subscript>2</Subscript>-molecular beam epitaxy of high quality ZnO

We have studied the growth and characterization of ZnO epilayers on (0001)-sapphire by H₂O₂-molecular beam epitaxy (MBE). A high temperature (HT) MgO buffer followed by a low-temperature ZnO buffer was introduced in order to accommodate the lattice mismatch between ZnO and sapphire. The surface morphology of the samples was studied using atomic force microscopy (AFM), and scanning electron microscopy (SEM). The crystalline quality of the layers was investigated by employing high resolution X-ray diffractometry (HRXRD) and high resolution transmission electron microscopy (HRTEM). The electrical properties of the grown ZnO layers were studied by Hall-effect measurements in a standard van der Pauw configuration. The measured surface roughness for the best layers is as low as 0.26 nm rms. HRXRD measurements of the obtained ZnO layers show excellent quality of the single crystalline ZnO heteroepitaxially grown on (0001)-sapphirewith a HT MgO buffer layers. The influence of the growth conditions on the crystalline quality is discussed. The FWHM of the HRXRD (0002) rocking curves measured for the 2-inch ZnO-on-sapphire is as low as 27 arcsec with a very high lateral homogeneity across the whole 2-inch ZnO epilayers. The results indicate that H₂O₂-MBE is a suitable technique to fabricate ZnO epilayers of very high quality. PACS 61.10.Nz; 68.37.Lp; 81.05.Dz; 81.15.Hi     

Femtosecond laser pulse filamentation versus optical breakdown in H<Subscript>2</Subscript>O

The competition between femtosecond laser pulse induced optical breakdown and femtosecond laser pulse filamentation in condensed matter is studied both experimentally and numerically using water as an example. The coexistence of filamentation and breakdown is observed under tight focusing conditions. The development of the filamentation process from the creation of a single filament to the formation of many filaments at higher pulse energy is characterized systematically. In addition, strong deflection and modulation of the supercontinuum is observed. They manifest themselves at the beginning of the filamentation process, near the highly disordered plasma created by optical breakdown at the geometrical focus. Received: 9 July 2002 / Revised version: 15 November 2002 / Published online: 19 March 2003 RID="*" ID="*"Corresponding author. Fax: +1-418/6562-623, E-mail: wliu@phy.ulaval.ca     

Dependence of the Er<Subscript>2</Subscript>O<Subscript>3</Subscript> selective emission on the intensity of laser thermal excitation

The dependence of the selective emission (SE) spectra of erbium oxide (Er₂O₃) in the visible and near-IR spectral ranges on the laser excitation intensity at a wavelength of 10.6 μ m is experimentally studied. The intensity ratio for the Er³⁺ electronic and vibronic transitions in the SE spectra is varied with an increase in the laser intensity to 10 kW/cm². The mechanism for the multiphonon fluctuation excitation of electronic states and a possibility for the SE application in the observation of the thermo-photo-laser effect are discussed.     

Kinetics of the plasmon optical response of Au nanoparticles/TiO<Subscript>2</Subscript> catalyst under O<Subscript>2</Subscript> and H<Subscript>2</Subscript> followed by differential diffuse reflectance spectroscopy

The changes in the optical properties of Au/TiO₂ powder catalyst, prepared by the deposition-precipitation method, are measured in the visible range by use of a home-made diffuse differential reflectance spectrometer, when the ambient atmosphere is switched between H₂ and O₂. Two main features are observed: (i) a short wavelength one, located between 400 and 600 nm, is shown to be related to the modifications of the plasmon resonance of the 3-dimensional metallic gold particles with mean size around 4 nm, induced by the exposure to oxygen or by its removal; (ii) a second feature, observed at long wavelengths between 600 and 1100 nm, is extremely sensitive to the exposure to oxygen. This optical feature could be due to the presence in the catalyst, either of Au⁰ clusters of several tens atoms, which are expected to display molecular-like transitions in this optical range, or to specific sites of the Au particles (edge atoms or peripheral atoms at the interface with the TiO₂ support), which could be highly reactive to oxygen.     

Anomalous absorption in H<Subscript>2</Subscript>CN and CH<Subscript>2</Subscript>CN molecules

Structures of H₂CN and CH₂CN molecules are similar to that of H₂CO molecule. The H₂CO has shown anomalous absorption for its transition 1₁₁–1₁₀ at 4.8 GHz in a number of cool molecular clouds. Though the molecules H₂CN and CH₂CN have been identified in TMC-1 and Sgr B2 through some transitions in ortho as well as in para species, here we have investigated the condition under which transitions 1₁₁–1₁₀ and 2₁₂–2₁₁ of these molecules may show anomalous absorption. For the present investigation, we have calculated energy levels and radiative transition probabilities. However, we have used scaled values for collisional rate coefficients. We found that relative values of collisional rate coefficients can produce the required anom-alous absorption in 1₁₁–1₁₀ and 2₁₂–2₁₁ transitions in the molecules.      

Polarizability of two interacting molecules N<Subscript>2</Subscript> and O<Subscript>2</Subscript>

In the context of the Silberstein theory, by introducing model atoms, the polarizability of pairs of interacting molecules N₂-N₂, O₂-O₂, and N₂-O₂ was studied in relation to the mutual orientation and the intermolecular distance of the molecules in the pairs. The polarizability tensor for the equilibrium configurations of the (N₂)₂ and (O₂)₂ dimers was calculated.     

Prussian blue modified FePt nanoparticles for the electrochemical reduction of H<Subscript>2</Subscript>O<Subscript>2</Subscript>

FePt nanoparticles were synthesized by polyol process with chloride salts, and the equiatomic composition was surface modified with prussian blue (PB). From the magnetic studies, the fraction of PB present in the surface-modified fcc-FePt was found to be 18 %. The FePt nanoparticles with an average particle size of 5 nm forms cluster like morphology, which were embedded in the PB matrix. The electrocatalytic reduction of hydrogen peroxide (H₂O₂) by the PB-modified FePt nanoparticles was studied. The reduction peak current showed linear response for H₂O₂ in the concentration range up to 3.5 mM. The FePt nanoparticles did not exhibit significant H₂O₂ reduction whereas the PB-modified FePt showed reduction of H₂O₂ with the addition of 0.35 mM of H₂O₂.