Influence of rubbing conditions of polyimide alignment layer on optical anisotropy of immobilized liquid crystal film

The relationship between the molecular orientation of a rubbed polyimide film (alignment layer) and that of mesogens in a photopolymerized liquid crystal (LC) coated on the film has been investigated using optical measurements. LC monomers were deposited on the alignment layer and were aligned in one direction. The LC monomers were subsequently photocured. Alignment layers under various rubbing conditions were prepared. It was found that the inclination angle of the refractive index ellipsoid and the optical retardation of photopolymerized LC films are strongly related to the optical anisotropy of the rubbed polyimide film. The photopolymerized LC film exhibited high optical anisotropy when alignment layers with an inclination angle of the refractive index ellipsoid smaller than 6° were used.     

Coumarin-based emissive liquid crystals

Calamitic luminophores are presented based on an elongated aryl-substituted coumarin core. The substitution pattern at terminal and lateral positions were systematically modified. The new compounds exhibit smectic C and/or nematic liquid crystalline phases. The chromophores show fluorescence in the blue spectral region. The benzopyranones are miscible with acrylate-substituted reactive nematic mesogens. Uniaxial orientation of the mixed systems was achieved by surface-assisted alignment on polyimide orientation layers. The film anisotropy was stabilised by subsequent photocrosslinking. The crosslinked oriented films display linear polarised photoluminescence upon isotropic excitation.     

Optical and surface morphological properties of polarizing films fabricated from a chromonic dye by the photoalignment technique

The inherent chromonic lyotropic liquid crystalline properties of a dye have been manipulated to fabricate multi-axial micropolarizing thin films by means of the photoalignment technique. The dye aqueous solution is deposited on a photopatterned polymer film to result in the macroscopic alignment of the dye molecules, followed by drying at ambient temperature. The solid polarizing dye layers thus produced exhibit very a high contrast ratio and degree of polarization in the region of visible light. Addition of a small amount of surfactant to the dye solution is a prerequisite for the generation of a nematic chromonic phase and for the formation of homogeneous thin dye layers on the polymer film. The correlation between the optical and surface morphological properties of the dye layers is discussed.     

Characterization of the alignment of a nematic liquid crystal using half leaky guided modes

The excitation of half leaky guided optical modes to characterize fully the optical tensor profile in a thin liquid crystal layer has been used to evaluate the effect of rubbed polyimide aligning layers on the alignment of a nematic liquid crystal. A cell fabricated with rubbed polyimide alignment surfaces was studied at a wavelength of 632.8 nm. The liquid crystalline layer is sandwiched between a high refractive index top glass plate and a low refractive index glass substrate. Angular dependent reflectivities are recorded using a coupling prism and matching fluid with the same index as the top glass plate. Careful fitting of the predictions from multilayer optics theory to the observed angle dependent polarization conversion and reflectivity data yields the director profile within the liquid crystal layer in great detail.     

Contrast ratio and switching of zigzag defect-free surface stabilized FLCD by photoinduced alignment

The contrast ratio and electro-optical switching behaviours of surface stabilized ferroelectric liquid crystal cells with alignment layers of a photodegradable polyimide prepared by polarized ultraviolet light irradiation have been investigated. The higher contrast ratio was obtained for a zigzag defect-free sample obtained by the photo-induced alignment method than by the rubbing method. The switching behaviours of the FLC, such as spontaneous polarization and response time, were measured. Higher spontaneous polarization and faster response times were obtained with cells prepared by the photoinduced alignment method. In addition, response times of the order of microseconds, which are fast enough to realize high quality moving images with video-frame rate, were obtained.     

Contrast ratio and switching of zigzag defect-free surface stabilized FLCD by photoinduced alignment

The contrast ratio and electro-optical switching behaviours of surface stabilized ferroelectric liquid crystal cells with alignment layers of a photodegradable polyimide prepared by polarized ultraviolet light irradiation have been investigated. The higher contrast ratio was obtained for a zigzag defect-free sample obtained by the photo-induced alignment method than by the rubbing method. The switching behaviours of the FLC, such as spontaneous polarization and response time, were measured. Higher spontaneous polarization and faster response times were obtained with cells prepared by the photoinduced alignment method. In addition, response times of the order of microseconds, which are fast enough to realize high quality moving images with video-frame rate, were obtained.     

Interplay between solid state microstructure and photophysics for poly(9,9‐dioctylfluorene) within oriented polyethylene hosts

We present a study of isotropic and uniaxially oriented binary blend films comprising ≤1 wt % of the conjugated polymer poly(9,9‐dioctylfluorene) (PFO) dispersed in both ultra‐high molecular weight (UHMW) and linear‐low‐density (LLD) polyethylene (PE). Polarized absorption, fluorescence and Raman spectroscopy, scanning electron microscopy, and X‐ray diffraction are used to characterize the samples before and after tensile deformation. Results show that blend films can be prepared with PFO chains adopting a combination of several distinct molecular conformations, namely glassy, crystalline, and the so‐called β‐phase, which directly influences the resulting optical properties. Both PFO concentration and drawing temperature strongly affect the alignment of PFO chains during the tensile drawing of the blend films. In both PE hosts, crystallization of PFO takes place during drawing; the resulting ordered chains show optimal optical anisotropy. Our results clarify the PFO microstructure in oriented blends with PE and the processing conditions required for achieving the maximal optical anisotropy. © 2014 The Authors. Journal of Polymer Science Part B: Polymer Physics Published by Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 22–38     

Synthesis,photo-reaction and photo-induced liquid crystal alignment of soluble polyimide with pendant cinnamate group

In this paper, the synthesis, photo-reaction and photo-induced liquid crystal alignment of a polyimide with a pendant cinnamate group are reported. The polyimide was synthesized by the thermal imidization of the polyamic acid derived from 4,4'-(hexafluoro-isopropylidene)diphthalic anhydride and hydroxydiaminopropane, followed by the attachment of the cinnamate group to the main chain polyimide. The surface of thin layers of the polyimide was found to be preferentially occupied by the pendant cinnamate groups, and liquid crystal alignment on the polyimide thin film exposed to polarized UV was independent of the cinnamate content. The thermal stability of the photo-induced liquid crystal alignment was enhanced with decrease in the cinnamate content. This could be attributed to the strong interchain interaction of the polyimide chains which prevents thermal randomization of the photo-product of the pendant cinnamates. The dependences of the photo-reaction temperature and the annealing temperature of the alignment layer on the azimuthal anchoring energy of the photo-aligned liquid crystal suggest that the local stress developed during the UV irradiation profoundly influences the thermal stability of the liquid crystal alignment.     

Anisotropic reactive mesogens transfer onto polyimides-mixture layer via imprinting method for continuous pretilt angle control

We present a new approach for the alignment process to orient liquid crystal (LC) molecules. The process consists of fabrication of a stamp composed of reactive mesogens (RMs), transfer of RM from the stamp onto polyimide (PI) layers, and LC device fabrication using the resulting RM/PI layers. The RM stamp was made anisotropic by a rubbing treatment, and this anisotropy was transferred to the PI layers via contact imprinting, leading to an achievement of uniform LC alignment. In addition, the pretilt angle of the LC molecules could be controlled by varying the content of homogeneous PI in the PI layers. We describe the effects of high pretilt angle upon the electro-optical (EO) characteristics of twisted-nematic (TN) cells based on the RM transfer film/blended PI layers.     

The role of segregation in the polarized emission from polyfluorene embedded in a liquid crystal

Polyfluorene (PFO) embedded in a nematic liquid crystal (LC) matrix is investigated. For low PFO weight contents, a homogeneous dispersion is obtained which displays a strong fluorescence anisotropy along the LC director, indicating a significant alignment of the polymeric chains along this direction. Besides, for relatively high PFO weight contents, phase separation takes place. Under these conditions, the sample is composed of micrometer‐sized domains, where the two species are in solution, enclosed by segregated polymeric boundaries. By polarized‐photoluminescence imaging and spectroscopy, it is found that most of the light emission originates from these boundaries and gets strongly pinned along their orientation. Since boundaries are mainly oriented orthogonal to the LC chains, this morphological alignment results in a system in which the orientation of the polarization emission can be predicted and possibly controlled. Conversely, in the homogeneous sample one can obtain a homogeneous emission polarization by controlling the alignment of the LC. These features are potentially relevant for the development of flexible polarization‐sensitive optoelectronic devices. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1558–1563     

Synthesis, photo-reaction and photo-induced liquid crystal alignment of soluble polyimide with pendant cinnamate group

In this paper, the synthesis, photo-reaction and photo-induced liquid crystal alignment of a polyimide with a pendant cinnamate group are reported. The polyimide was synthesized by the thermal imidization of the polyamic acid derived from 4,4'-(hexafluoro-isopropylidene)diphthalic anhydride and hydroxydiaminopropane, followed by the attachment of the cinnamate group to the main chain polyimide. The surface of thin layers of the polyimide was found to be preferentially occupied by the pendant cinnamate groups, and liquid crystal alignment on the polyimide thin film exposed to polarized UV was independent of the cinnamate content. The thermal stability of the photo-induced liquid crystal alignment was enhanced with decrease in the cinnamate content. This could be attributed to the strong interchain interaction of the polyimide chains which prevents thermal randomization of the photo-product of the pendant cinnamates. The dependences of the photo-reaction temperature and the annealing temperature of the alignment layer on the azimuthal anchoring energy of the photo-aligned liquid crystal suggest that the local stress developed during the UV irradiation profoundly influences the thermal stability of the liquid crystal alignment.     

Determination of the molecular orientation of very thin films on solid substrates: surface liquid crystal layers and rubbed polyimide films

The molecular orientation of very thin films on solid substrates can be determined quantitatively by measuring the polarized infrared (IR) absorption spectra of samples as a function of angle of incidence. The quantitative molecular orientation is derived by fitting the incident angle dependence and the dichroic ratio with theoretical calculations. We applied this method to a technologically important system: liquid crystal (LC)/rubbed polyimide film. To understand the alignment mechanism of LC molecules in contact with rubbed polyimide films, we have quantitatively determined the molecular orientation of rubbed polyimide films and a surface LC layer in contact with a rubbed polyimide film. In this paper two relations are discussed: (1) correlation between the inclination angle of polyimide backbone structures in rubbed films and the pretilt angle of bulk LC in contact with them, and (2) relation among the molecular orientation of a rubbed polyimide film and those of surface and bulk LC layers in contact with it.     

Photoinduced anisotropy and photoalignment of nematic liquid crystals by a novel polymer liquid crystal with a coumarin-containing side group

A new type of photo-crosslinkable methacrylate polymer liquid crystal (PLC) with a coumarincontaining mesogenic side group was synthesized and applied as the photoalignment layer for low molecular mass nematic liquid crystals. Linearly polarized ultraviolet light was directed onto a thin film of PLC under various exposure conditions. When a film was irradiated at room temperature, a small negative optical anisotropy was generated due to angular-selective photo-crosslinking. In contrast, when the film was exposed near the clearing temperature of the PLC, the induced anisotropy was positive due to thermally enhanced photoinduced reorientation of the side groups. The aggregation of the mesogenic groups was also observed when the irradiation was carried out in the liquid crystalline temperature range of the PLC. The LC alignment on the photoreacted film was greatly dependent on these irradiation conditions. It was made clear that the LC alignment was regulated by the interaction among the LC, the photo-crosslinked side groups and the remaining mesogenic side groups, and that the aggregated mesogenic groups inhibited the LC alignment.     

Alignment control of liquid crystals on surface relief gratings

Liquid crystal alignment layers of a high T_g polymer containing an azobenzene moiety are prepared by photofabrication of a surface relief grating (SRG). The interference pattern of a circular and linearly polarized Ar⁺ laser beam generated the surface relief grating and the morphology was detected by atomic force microscope. The optical anisotropy of the films was investigated by polarizing optical microscopy. The orientation of the optical axis of the film mainly depends on the direction of the initial polarization plane. Nematic liquid crystals were aligned parallel to the direction of the grating, but the pretilt angles of the liquid crystals were nearly zero. Irradiation with homogeneous linearly polarized light could also align liquid crystals, but this alignment capability was weaker than that of the SRG film.     

Photoinduced anisotropy and photoalignment of nematic liquid crystals by a novel polymer liquid crystal with a coumarin-containing side group

A new type of photo-crosslinkable methacrylate polymer liquid crystal (PLC) with a coumarincontaining mesogenic side group was synthesized and applied as the photoalignment layer for low molecular mass nematic liquid crystals. Linearly polarized ultraviolet light was directed onto a thin film of PLC under various exposure conditions. When a film was irradiated at room temperature, a small negative optical anisotropy was generated due to angular-selective photo-crosslinking. In contrast, when the film was exposed near the clearing temperature of the PLC, the induced anisotropy was positive due to thermally enhanced photoinduced reorientation of the side groups. The aggregation of the mesogenic groups was also observed when the irradiation was carried out in the liquid crystalline temperature range of the PLC. The LC alignment on the photoreacted film was greatly dependent on these irradiation conditions. It was made clear that the LC alignment was regulated by the interaction among the LC, the photo-crosslinked side groups and the remaining mesogenic side groups, and that the aggregated mesogenic groups inhibited the LC alignment.     

Alignment control of liquid crystals on surface relief gratings

Liquid crystal alignment layers of a high T _g polymer containing an azobenzene moiety are prepared by photofabrication of a surface relief grating (SRG). The interference pattern of a circular and linearly polarized Ar⁺ laser beam generated the surface relief grating and the morphology was detected by atomic force microscope. The optical anisotropy of the films was investigated by polarizing optical microscopy. The orientation of the optical axis of the film mainly depends on the direction of the initial polarization plane. Nematic liquid crystals were aligned parallel to the direction of the grating, but the pretilt angles of the liquid crystals were nearly zero. Irradiation with homogeneous linearly polarized light could also align liquid crystals, but this alignment capability was weaker than that of the SRG film.     

Anchoring and electro-optical dynamics of thin liquid crystalline films in a polyimide cell: experiment and theory

The surface-dependent anchoring and electro-optical (EO) dynamics of thin liquid crystalline films have been examined using Fourier transform infrared spectroscopy. A simple nematic liquid crystal, 4-n-pentyl-4'-cyanobiphenyl (5CB), is confined as 40, 50, and 390 nm thick films in nanocavities defined by gold interdigitated electrode arrays (IDEAs) patterned on polyimide-coated zinc selenide (ZnSe) substrates [Noble et al., J. Am. Chem. Soc. 124, 15020 (2002)]. New strategies for controlling the anchoring interactions and EO dynamics are explored based on coating a ZnSe surface with an organic polyimide layer in order to both planarize the substrate and induce a planar alignment of the liquid crystalline film. The polyimide layer can be further treated so as to induce a strong alignment of the nematic director along a direction parallel to the electrode digits of the IDEA. Step-scan time-resolved spectroscopy measurements were made to determine the rate constants for the electric-field-induced orientation and thermal relaxation of the 5CB films. In an alternate set of experiments, uncoated ZnSe substrates were polished unidirectionally to produce a grooved surface presenting nanometer-scale corrugations. The dynamical rate constants measured for several nanoscale film thicknesses and equilibrium organizations of the director in these planar alignments show marked sensitivities. The orientation rates are found to vary strongly with both the magnitude of the applied potential and the initial anisotropy of the alignment of the director within the IDEA. The relaxation rates do not vary in this same way. The marked variations seen in EO dynamics can be accounted for by a simple coarse-grained dynamical model.     

Photo-induced liquid crystal alignment on polyimide containing fluorinated groups

Polyimides were prepared from pyromellitic dianhydride, 4,4'-bis[2-(4-aminophenyl)hexafluoroprop-2-yl]diphenyl ether and 4,4'-diamodiphenyl ether (PMDA-BDAF-ODA) and used for liquid crystal alignment using linearly polarized UV exposure. The alignment properties of a LC on the polyimide films were found to depend on the fluorine content in the PMDA-BDAF-ODA alignment layer and on the UV exposure time. Pretilt angles were obtained in the range 0° to 90° dependent upon the fluorine content in the polyimide film and the UV exposure time. These effects seem to be closely related to the surface energy of the photo-alignment layer.     

WHAT ARE THE DIFFERENCES OF POLYMER SURFACE RELAXATION FROM THE BULK?

The polymer surface relaxation in thin films has been a long debating issue.We report a new method on studying surface relaxation behaviors of polymer thin films on a solid substrate.This method involved utilizing a rubbed polyimide surface with a pretilting angle in a liquid crystalline cell.Due to the surface alignment,the liquid crystals were aligned along the rubbing direction.During heating the liquid crystalline cell,we continuously monitored the change of orientation of the liquid crystals.It is u...     

Polyimide-free homogeneous photoalignment induced by polymerisable liquid crystal containing cinnamate moiety

We designed and synthesised a reactive mesogen (CRM) containing cinnamate moiety in the core and two acrylate groups at both ends. The structure was characterised by ¹H NMR and FT-IR, and its liquid crystalline property was investigated by DSC and POM. The compound showed a nematic phase between 175.2 – 97.5 ^oC, followed by a smectic C phase between 97.5 and 57.9 ^oC during the cooling cycle. We proposed a fabrication method to achieve uniaxial homogeneous alignment of liquid crystals by irradiating the CRM-doped LC mixture in a sandwich cell of in-plane switching mode (CRM-IPS) with linearly polarised ultraviolet light. The results indicated that the CRM-IPS cell showed excellent initial dark state with a good alignment state, electro-optical performance and durability. This confirmed that the photo-induced alignment of LCs by CRM possesses outstanding alignment capability compared to the conventional rubbed polyimide alignment layer. We expect that this fabrication method is a promising candidate for cost-effective, green-manufacturing, and high-quality alignment method for the manufacturing of high-resolution liquid crystal displays (LCDs).