Enantio- and diastereoselective stepwise cyclization of polyprenoids induced by chiral and achiral LBAs. A new entry to (-)-ambrox, (+)-podocarpa-8,11,13-triene diterpenoids, and (-)-tetracyclic polyprenoid of sedimentary origin

An enantio- and diastereoselective stepwise cyclization of polyprenoids induced by Lewis acid-assisted chiral Br?nsted acids (chiral LBAs) and achiral LBAs is described. In particular, the absolute stereocontrol in the initial cyclization of polyprenoids to form an A-ring induced by chiral LBAs and the importance of the nucleophilicity of the internal terminator in polyprenoids for the relative stereocontrol in subsequent cyclization are demonstrated. (-)-Ambrox was synthesized via the enantioselective cyclization of (E,E)-homofarnesyl triethylsilyl ether with tin(IV) chloride-coordinated (R)-2-(o-fluorobenzyloxy)-2'-hydroxy-1,1'-binaphthyl ((R)-BINOL-o-FBn) and subsequent diastereoselective cyclization with CF(3)CO(2)H.SnCl(4) as key steps. Protection of (E,E)-homofarnesol by a triethylsilyl group increased the enantioselectivity of chiral LBA-induced cyclization and both the chemical yield and diastereoselectivity in the subsequent cyclization. The enantioselective cyclization of homo(polyprenyl)arenes possessing an aryl group was also induced by (R)-BINOL-o-FBn.SnCl(4). Several optically active podocarpa-8,11,13-triene diterpenoids and (-)-tetracyclic polyprenoid of sedimentary origin were synthesized (75-80% ee) by the enantioselective cyclization of homo(polyprenyl)benzene derivatives induced by (R)-BINOL-o-FBn.SnCl(4) and subsequent diastereoselective cyclization induced by BF(3).Et(2)O/EtNO(2) or CF(3)CO(2)H .SnCl(4).     

Enantioselective Ir(I)-catalyzed carbocyclization of 1,6-enynes by the chiral counterion strategy

Enantioenriched bicyclo[4.1.0]hept-2-enes were synthesized by Ir(I)-catalyzed carbocyclization of 1,6-enynes. No chiral ligands were used, CO and PPh(3) were the only ligands bound to iridium. Instead, the stereochemical information was localized on the counterion of the catalyst, generated in situ by reaction of Vaska's complex (trans-[IrCl(CO)(PPh(3))(2)]) with a chiral silver phosphate. Enantiomeric excesses up to 93% were obtained when this catalytic mixture was used. (31)P NMR and IR spectroscopy suggest that formation of the trans- [Ir(CO)(PPh(3))(2)](+) moiety occurs by chlorine abstraction. Moreover, density functional theory calculations support a 6-endo-dig cyclization promoted by this cationic moiety. The chiral phosphate anion (O-P*) controls the enantioselectivity through formation of a loose ion pair with the metal center and establishes a C-H···O-P* hydrogen bond with the substrate. This is a rare example of asymmetric counterion-directed transition-metal catalysis and represents the first application of such a strategy to a C-C bond-forming reaction.     

杂核簇合物μ_3－CphCoMM＇的合成及结构表征

本文利用等电子金属碎片交换法，由μ３－ＣＰｈＣｏ３（ＣＯ）９（１）与ＮａＭ（ＣＯ）３Ｃｐ’（Ｍ＝Ｍｏ，Ｗ；ＣＰ’＝ＣＨ３Ｃ５Ｈ４）反应根到μ３－ＣＰｈＣｏ２Ｍ（ＣＯ）８ＣＰ’（２ａ，ｂ），μ３—ＣＰｈＣｏＭｏ２（ＣＯ）７Ｃｐ＇２（４），再由２ａ与Ｎａ２［Ｆｅ（ＣＯ）４］反应得到手征性簇合物μ３－ＣＰｈＦｅＣｏＭｏ（ＣＯ）２ＣＰ＇Ｈ（３），对合成的簇合物进行了元素分析、ＩＲ、１ＨＮＭＲ．ＭＳ分析表征．     

Application of Rh-catalyzed cyclization to the formation of a chiral quaternary carbon

Rh-Catalyzed cyclization was applied to the formation of a chiral quaternary carbon. It has become clear that the Rh-complex can discriminate between isopropenyl and 2-isopentenyl (or isopentyl) substituents, and the cyclization afforded 3,3,4-trisubstituted cyclopentanones with a chiral quaternary carbon in a stereoselective manner. The cyclization of 4-pentenals 6a, b by an achiral neutral Rh(PPh3)3Cl afforded 3,3,4-cis-trisubstituted cyclopentanones (+/-)-7a,b in 86-96%, and the cyclization by a cationic Rh[(R)-BINAP]CIO4 afforded 3,3,4-trans-trisubstituted cyclopentanones (-)-8a, b of 82-86% ee in 88-98% yields. The mechanism of stereoselection by Rh-complexes is also discussed.     

Synthesis and characterization of tricarbonyl(trimethylenemethane)iron complexes: crystal structure of (2-methylene-6-p-nitrobenzoyloxy-heptan-1,3-diyl)Fe(CO)3

A series of substituted tricarbonyl(trimethylenemethane)-iron complexes were prepared by functionalization of (3-butenyltrimethylenemethane)Fe(CO)3 (3) or (formyltrimethylenemethane)Fe(CO)3 (14). The products are characterized by 1H and 13C-n.m.r., i.r. and high resolution mass spectroscopy. In addition, the X-ray diffraction analysis of one of these derivatives (13a) was accomplished. Reactions of (3), which introduce a new chiral centre, occur in a non-diastereoselective fashion, while reactions of (14) that introduce a new chiral centre proceed with good diastereoselectivity. The remote nature of the reactive functionality and the (TMM)Fe(CO)3 group is responsible for the lack of diastereoselectivity for (3). The present work demonstrates the robust nature of the (TMM)Fe(CO)3 fragment, embodied in its resistance toward oxidation, and to attack by nucleophiles. This revised version was published online in June 2006 with corrections to the Cover Date.     

Total synthesis of epothilone a through stereospecific epoxidation of the p-methoxybenzyl ether of epothilone C

The total synthesis of epothilone A is described by the coupling four segments 4-7 a. Three of the segments, 4, 5 and 7 a, have only one chiral center; all other chiral centers were introduced by simple asymmetric catalytic reactions. The key steps are the ring opening of epoxide 5 with acetylide 8 for the construction of the C12-C13 cis double bond and a practical hydrolytic kinetic resolution (HKR) developed by Jacobsen group for the introduction the chiral center at C3. Especially, the stereospecific epoxidation of 3-O-PMB epothilone C 3 b through long-range effect of 3-O-PMB protecting group gave high yields of the C12-C13 alpha-epoxide for the synthesis of target molecule.     

Dimerization of pentanuclear clusters [Fe3Q(AsMe)(CO)9] (Q = Se, Te) as a conversion pathway to novel cubane-like aggregates

The first examples of carbonyl heterocubane-type clusters, [Fe(4)(μ(3)-Q)(2)(μ(3)-AsMe)(2)(CO)(12)] (2, Q = Se (a), Te (b)), which simultaneously contain elements of group 15 and 16, were obtained by thermolysis of [Fe(3)(μ(3)-Q)(μ(3)-AsMe)(CO)(9)] (1) in acetonitrile. The clusters 2 possess a cubic Fe(4)Q(2)As(2) core with alternating Fe and Q/As atoms. The coordination environment of the Fe atoms is close to octahedral, and those of Q or As atoms are tetrahedral, which determines the distorted cubic cluster core geometry. The second main products of thermolysis are the clusters [Fe(6)(μ(3)-Q)(μ(4)-Q)(μ(4)-AsMe)(2)(CO)(12)] (3a,b), whose core contains double the elemental composition of the initial cluster 1. In the case of the Se-containing cluster two other minor products [Fe(4)(μ(4)-Se)(μ(4)-SeAsMe)(CO)(12)] (4) and [Fe(3)(μ(3)-AsMe)(2)(CO)(9)] (5) are formed. Based on the structures and properties of the products, a reaction route for the conversion of 1 into 2 is proposed, which includes the associative formation of the clusters 3 as intermediates, unlike the dissociative pathways previously known for the transformations of similar clusters of the type [Fe(3)Q(2)(CO)(9)].     

Stereospecific 1,3-migration of an Fe(CO)3 group on acyclic conjugated polyenes: application to remote and iterative asymmetric induction

The stereochemical outcome of the 1,3- and 1,5-migration of an Fe(CO)3 group on (acyclic polyene)Fe(CO)3 complexes and their application to stereoselective construction of remote and contiguous stereogenic centers are described. Treatment of the [(eta(4)-4-7)triene]Fe(CO)3 complexes 1a-d bearing an electron-withdrawing group on the terminal position of an uncomplexed olefin with a base such as KN(SiMe3)2 (KHMDS) and LiCH2CN induced the 1,3-migration reaction of the Fe(CO)3 group, giving the [(eta4-2-5)triene]Fe(CO)3 complexes 2a-d in moderate to good yields, depending on the electron-withdrawing groups. From an experiment using the chiral (trienenitril)Fe(CO)3 complex 5, it is revealed that the 1,3-migration proceeds with inversion of configuration. Similarly, the 1,5-migration reaction of the[(eta4-6-9)tetraenone]Fe(CO)3 complexes 9 occurred with a catalytic amount of KHMDS, giving the [(eta4-2-5)tetraenone]Fe(CO)3 complexes 10 with retention of configuration. Furthermore, we have succeeded in the first regio- and stereoselective nucleophilic substitution of the (3,5-diene-1,2-diol) Fe(CO)3 complexes (15 --> 24a-h) with various nucleophiles via the ortho esters 21. By using iterative manipulation of the above two reactions, remote stereocontrol of the terminal substituents on acyclic polyene (9 --> 12) and construction of contiguous stereogenic centers (19, 28) have been achieved.     

Synthesis of chiral 2‐oxo‐ and 2‐thio‐1,3,2‐oxazaphospholidines via the asymmetric cyclization of l‐serinoates with (thio)phosphoryl dichlorides

In this article, we have described the asymmetric cyclization of L‐serinoates and N‐benzyl L‐serinoate with phosphoro(no‐)dichloridates or their thio‐analog, respectively, and we have investigated the asymmetric induction effect of the chiral carbon center on the forming of a chiral phosphorus center. The diastereomeric excess percentages (de%) of the desired products 2‐oxo‐ and 2‐thio‐1,3,2‐oxazaphospholidines, are obtained based on their ³¹P NMR data. In some cases, the cyclization products have been separated as pure diastereomers by column chromatography. Their configuration is preliminarily discussed. © 2000 John Wiley & Sons, Inc. Heteroatom Chem 11:187–191, 2000     

Stereoselective Synthesis of (+/-)-alpha-Kainic Acid Using Free Radical Key Reactions

Thiol-mediated free radical isomerization of a deliberately substituted but-3-enyl isocyanide 12a, and n-Bu(3)SnH/AIBN-mediated free radical cyclization of a deliberately substituted but-3-enyl isothiocyanate 22, afforded, respectively, the (ethylthio)pyrroline 13a and the thiopyroglutamates 5 and 23. Reduction, protection, and deprotection of these heterocyclic compounds afforded proline derivatives 6 and 25 which contain all the structural elements of alpha-kainic acid (1) except the C-2 acetic acid moiety. These intermediates were stereospecifically converted into (+/-)-alpha-kainic acid using a new method of temporary sulfur connection. Accordingly, CH(2)CO(2)Me is linked to the chiral isopropenyl anchor and then intramolecularly connected to the pyrrolidine ring and eventually disconnected from its anchor by a sequential reductive double elimination process in which the isopropenyl double bond is restored.     

The asymmetric synthesis of trans-substituted cyclopropanecarboxylic acid derivatives

The asymmetric synthesis of trans-substituted cyclopropanecarboxylic acid derivatives is achieved via stereoselective nucleophilic methylene transfer to E-,β-unsaturated acyl ligands bound to the iron chiral auxiliary [(η⁵-C₅H₅)Fe(CO)(PPh₃)].     

The first example of macrocycles containing butterfly transition metal cluster cores via novel tandem reactions

A novel type of double butterfly, two mu-CO-containing dianions {[(mu-CO)Fe2(CO)6]2[mu-SCH2(CH2OCH2)nCH2S-mu]}2- (m1, n = 2, 3), has been synthesized from dithiol HSCH2(CH2OCH2)nCH2SH (n = 2, 3), Fe3(CO)12, and Et3N in THF at room temperature. While dianions m1 react in situ with CS2 followed by treatment with dihalide 1,4-(BrCH2)2C6H4 or 1,4-I(CH2)4I to give macrocyclic clusters [mu-SCH2(CH2OCH2)nCH2S-mu](mu-CS2ZCS2-mu)[Fe2(CO)6]2 (1a, n = 2, Z = 1,4-(CH2)2C6H4; 1b, n = 3, Z = (CH2)4), reactions of dianions m1 with (mu-S2)Fe2(CO)6 followed by treatment with dihalide 1,4-I(CH2)4I afford macrocyclic clusters [mu-SCH2(CH2OCH2)nCH2S-mu]{[Fe2(CO)6]2(mu4-S)}2[mu-S(CH2)4S-mu] (2a, n = 2; 2b, n = 3). The crystal structures of 1a and 2b are described.     

Addition Reaction of Fe（CO）_n （n = 3～5） on Fullerene C_（50）, C_（60）, and C_（70）： A Density Functional Theory Study

The electronic structure and reactivities of Fe(CO)n (n = 3~5) addition to different fullerenes have been investigated through the first-principles calculations, and the results indicate that Fe(CO)3 and Fe(CO)4 can be adsorbed to the outside network of fullerene via hollow and bridge sites, respectively. Both of them have larger binding energy, but when Fe(CO)5 is adsorbed via the top site, the binding energy is relatively smaller. According to the directional curvature theory, the reactivities of Fe(CO)3 addition to the fullerenes are determined by KM of the ring center, and those of Fe(CO)4 addition by KD of the C-C bond curvature; while for Fe(CO)5, it presents weak reactivities in the addition reaction because of the larger volume effect. No matter whether the addition reaction takes place on the hollow or bridge site, the binding energies show a linear relationship with KD. This work further enriched the directional curvature theory and applied the isolobel analogy theory in the fullerene addition reactions.     

Synthesis of (+/-)-bakkenolide-A and its C-7, C-10, and C-7,10 epimers by means of an intramolecular Diels-Alder reaction

(+/-)-bakkenolide-A (1) was prepared in five steps from ethyl 4-benzyloxyacetoacetate by sequential alkylations with tiglyl bromide and (Z)-5-bromo-1,3-pentadiene, followed by an intramolecular Diels-Alder reaction of (E,Z)-triene 25b as the key step. The hydrindane cycloadduct 28 was subjected to hydrogenation and spontaneous or acid-catalyzed lactonization, followed by a Witttig reaction to introduce the exocyclic methylene group of 1. The known 7-epibakkenolide-A (2) and novel 10-epi- and 7,10-diepibakkenolide-A (3 and 4, respectively) stereoisomers were obtained as minor byproducts. When (E)-5-bromo-1,3-pentadiene was used instead of the Z-isomer, the 10-epi- and 7,10-diepibakkenolides were the major products. In both cases exo cyclization was preferred over endo. An alternative approach was based on a similar intramolecular Diels-Alder cycloaddition, using dimethyl malonate instead of ethyl 4-benzyloxyacetoacetate as the starting material for the double alkylation preceding the cycloaddition step. The cycloadduct was then converted into the corresponding alpha-phenylseleno propargyl esters 16 or 22. However, attempted formation of the spiro center by a radical cyclization resulted chiefly in reductive deselenization.     

Chemistry of boryllithium: synthesis, structure, and reactivity

A series of lithium salts of boryl anion, boryllithiums, were synthesized and characterized by NMR spectroscopy and crystallographic analysis. In addition to the parent boryllithium compound 35a, structural modification of boryllithium, using saturated C-C and benzannulated C=C backbones in the five-membered ring and mesityl groups on the nitrogen atoms, also allowed generation of the corresponding boryllithium. The solid state structures of boryllithium showed that the boron-lithium bond is polarized where the boron atom is anionic in all (35a x DME)(2), 35a x (THF)(2), 35b x (THF)(2), and 35c x (THF)(2) when compared to the structures of hydroborane 38a-c and optimized free boryl anion opt-46a-c. Dissolution of the isolated single crystals of (35a x DME)(2) and 35a x (THF)(2) in THF-d(8) showed that the boron-lithium bond remained in solution and free DME or THF molecules were observed. Temperature-dependent (11)B NMR chemical shift changes of 35a were observed in THF-d(8) or methylcyclohexane-d(14), suggesting a change of chemical shift anisotropy around the boron center. The HOMO of opt-35a x (THF)(2) had a lone pair character on the boron atom, as observed for phenyllithium, whereas the HOMO of hydroborane 38a corresponds to the pi-orbital of the boron-containing five-membered heterocycle. The polarity of the B-Li bond, estimated by AIM analysis, was similar to that of alkyllithium. Boryllithiums 35a and 35b behave as a base or a boron nucleophile in reaction with organic electrophiles via deprotonation, S(N)2-type substitution, halogen-metal exchange or electron-transfer, 1,2-addition to a carbonyl group, and S(N)Ar reaction. In the case of the reaction with CO(2), intramolecular cyclization followed by CO elimination from borylcarboxylate anion and subsequent protonation gave hydroxyboranes 64a and 64b. The characters of the carbonyl groups in the borylcarbonyl compounds 60a, 60b, 61, 62, and 63a, which were obtained from the reaction of boryllithiums 35a and 35b, were investigated by X-ray crystallography, IR, and (13)C NMR spectroscopy to show that the boryl substituent weakened the C=O bond when compared to carbon substituted analogues.     

Super acid-induced Pummerer-type cyclization reaction: improvement in the synthesis of chiral 1,3-dimethyl-1,2,3,4-tetrahydroisoquinolines

Improved synthesis of four stereoisomeric chiral 1,3-dimethyl-1,2,3,4-tetrahydroisoquinolines (1a, b, ent-1a, b) was achieved via the super acid-induced cyclization of chiral N-[1-methyl-2-(phenylsulfinyl)ethyl]-N-(1-phenylethyl)formamides (4a, b, ent-4a, b) using the Pummerer-type cyclization reaction as a key step. The cyclization leading to the isoquinoline ring proceeded in a quantitative manner when trifluoromethane sulfonic acid (TFSA) was used as the super acid, although Friedel-Crafts-type alkylation of 4-phenylsulfanyl TIQ derivatives (5) with benzene used as the solvent accompanied cyclization to yield the 4-phenyl-TIQs (7). The byproduct (7) was exclusively formed when a large excess amount of TFSA was used.     

Rhodium(I)‐Catalyzed Enantioselective Cyclization of Enynes by Intramolecular Cleavage of the Rh−C Bond by a Tethered Hydroxy Group

Rhodium(I)‐catalyzed enantioselective intramolecular cyclization of enynes having a hydroxy group in the tether was investigated, and various cyclic compounds possessing a chiral quaternary carbon center were obtained in high yields with high ees. In this cyclization, a Rh?C(sp²) bond in the rhodacyclopentene intermediate, which was formed by enantioselective oxidative cycloaddition of enynes to a chiral rhodium(I) complex, was intramolecularly cleaved by σ‐bond metathesis of a tethered O?H bond in the substrate. Furthermore, it was found that the cyclic compounds were obtained with high ees even when the starting materials having a racemic secondary alcohol moiety were used in this reaction.     

Flexible Synthesis of Enantiomeric and Racemic 3-Hydroxymethyl-1,2,3,4-tetrahydroisoquinolines via Bischler-Napieralski Reaction

With methyl ester of N-acylated L-3-(3,4-dihydroxyphenyl)alanine(L-DOPA) as starting material, racemic derivatives of 3-hydroxymethyl-1,2,3,4-tetrahydroisoquinoline were obtained with cyclization by Bischler-Napie- ralski(BN) reaction followed by reduction of methyl ester group to hydroxymethyl, while the optical pure enantiomers were prepared by the reduction of the methyl ester group to hydroxymethyl prior to cyclization with BN reaction. Racemerization took place in the BN stage in the presence of methyl ester, an electron-withdrawing group adjacent to chiral center. Therefore, the sequence of synthetic stages of cyclization and reduction, and subsequently whether there is electron-withdrawing group or not determines the chiral optical activity of the products.     

Correlation between computed gas-phase and experimentally determined solution-phase infrared spectra: models of the iron-iron hydrogenase enzyme active site

Gas-phase density functional theory calculations (B3LYP, double zeta plus polarization basis sets) are used to predict the solution-phase infrared spectra for a series of CO- and CN-containing iron complexes. It is shown that simple linear scaling of the computed C--O and C--N stretching frequencies yields accurate predictions of the the experimentally determined nu(CO) and nu(CN) values for a variety of complexes of different charges and in solvents of varying polarity. As examples of the technique, the resulting correlation is used to assign structures to spectroscopically observed but structurally ambiguous species in two different systems. For the (mu-SCH2CH2CH2S)[Fe(CO)3]2 complex in tetrahydrofuran solution, our calculations show that the initial electrochemical reduction process leads to a simple one-electron reduced product with a structure very similar to the (mu-SCH2CH2CH2S)[Fe(CO)3]2 parent complex. For the iron-iron hydrogenase enzyme active site, our computations show that the absence or presence of a water molecule near the distal iron center (the iron center further from the [4Fe4S] cluster and protein backbone) has very little effect on the predicted infrared spectra.     

Oxidatively induced reactivity of [Fe2(CO)4(κ2-dppe)(μ-pdt)]: an electrochemical and theoretical study of the structure change and ligand binding processes

The one-electron oxidation of the diiron complex [Fe(2)(CO)(4)(κ(2)-dppe)(μ-pdt)] (1) (dppe = Ph(2)PCH(2)CH(2)PPh(2); pdt = S(CH(2))(3)S) has been investigated in the absence and in the presence of P(OMe)(3), by both electrochemical and theoretical methods, to shed light on the mechanism and the location of the oxidatively induced structure change. While cyclic voltammetric experiments did not allow to discriminate between a two-step (EC) and a concerted, quasi-reversible (QR) process, density functional theory (DFT) calculations favor the first option. When P(OMe)(3) is present, the one-electron oxidation produces singly and doubly substituted cations, [Fe(2)(CO)(4-n){P(OMe)(3)}(n)(κ(2)-dppe)(μ-pdt)](+) (n = 1: 2(+); n = 2: 3(+)) following mechanisms that were investigated in detail by DFT. Although the most stable isomer of 1(+) and 2(+) (and 3(+)) show a rotated Fe(dppe) center, binding of P(OMe)(3) occurs at the neighboring iron center of both 1(+) and 2(+). The neutral compound 3 was obtained by controlled-potential reduction of the corresponding cation, while 2 was quantitatively produced by reaction of 3 with CO. The CO dependent conversion of 3 into 2 as well as the 2(+) ? 3(+) interconversion were examined by DFT.