Synthesis and characterization of polypyrrole/Sn-doped TiO2 nanocomposites (NCs) as a protective pigment

We have chemically polymerized pyrrole in the presence of Sn-doped TiO₂ nanoparticles (NPs) and TiO₂ (NPs) which act as a protective pigment. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) results show a core-shell structure of pigments in which TiO₂ and Sn-doped TiO₂ NPs have a nucleus effect and caused a homogenous PPy core-shell type morphology leading to coverage of the TiO₂ and Sn-doped TiO₂ NPs by PPy deposit. The XRD results indicate that the crystalline size of polypyrrole/TiO₂ NCs and polypyrrole/Sn-doped TiO₂ NCs were approximately 93.46 ± 0.06 and 23.36 ± 0.06 nm respectively. The electrochemical impedance spectroscopy (EIS) results show that the performance of polypyrrole/Sn-doped TiO₂ NCs is better than polypyrrole/TiO₂ NCs. The results indicate that increasing the area of synthesized polypyrrole in the presence of Sn-doped TiO₂ NPs can increase its ability to interact with the ions liberated during the corrosion reaction of steel in the presence of NaCl. The UV-vis results show that the band gap of TiO₂ NPs increases with doped of Sn in lattice of TiO₂. The increase of the band gap of TiO₂ with doping of Sn can decrease the charge transfer through the coating.     

Preparation of metal–ceramic composites by sonochemical synthesis of metallic nano-particles and in-situ decoration on ceramic powders

Copper and nickel nanoparticles were synthesized using reducing agents in the presence of direct high energy ultra-sonication. The metallic nanoparticles were decorated on various ceramic substrates (e.g. α-Al₂O₃, and TiO₂) leading to metal reinforced ceramics with up to 45% metallic content. Different parameters, such as the amount of precursor material or the substrate, as well as the intensity of ultrasound were examined, in order to evaluate the percentage of final metallic decoration on the composite materials. All products were characterized by means of Inductively Coupled Plasma Spectroscopy in order to investigate the loading with metallic particles. X-ray Diffraction and Scanning Electron Microscopy were also used for further sample characterization. Selected samples were examined using Transmission Electron Microscopy, while finally, some of the powders synthesized, were densified by means of Spark Plasma Sintering, followed by a SEM/EDX examination and an estimation of their porosity.     

Electrochemical deposition of silver nanoparticles on TiO2/FTO thin films

Silver nanoparticles were deposited on titanium oxide^IV (TiO₂) thin films supported on FTO (fluorine-doped tin oxide^IV) glass using a double pulse electrochemical deposition method. A systematic study of particle nucleation and growth is presented as a function of applied potential and time. Samples were analyzed by grazing-angle X-ray diffraction (GIXRD) technique and morphology was observed using Scanning Electron Microscopy and Energy Dispersive Spectroscopy device (SEM-EDS). Our results confirm the possibility of controlled electrochemical homogeneous deposition of metallic silver particles over TiO₂ surface, which exhibit a potential application in catalytic processes.     

Structural characterization of dense reduced BaTiO3 and Ba0.95La0.05TiO3 nanoceramics showing colossal dielectric values

BaTiO_3−x and Ba_0.95La_0.05TiO_3−x nanoceramics showing colossal permittivity values have been characterized. While starting powders are of cubic symmetry, X-ray and Neutron Diffraction techniques and Raman Spectroscopy measurements show that the one-step processed ceramics obtained by Spark Plasma Sintering (SPS) contain cubic and tetragonal phases. Rather large oxygen deficiency determined in such ceramics by Electron Micro Probe analysis and Electron Energy Loss Spectroscopy analyzes is explained by the presence of Ti³⁺, as evidenced by X-ray Photoelectron Spectroscopy measurements. Transmission Electron Microscopy and High Resolution Transmission Electron Microscopy show that these ceramics contain 50-300 nm grains, which have single-domains, while grain boundaries are of nanometer scale. Colossal permittivity values measured in our dense nanoceramics are explained by a charge hopping mechanism and an interfacial polarization of a large number of polarons generated after sample reduction in SPS apparatus.     

Poly(amidehydroxyurethane) template magnetite nanoparticles electrosynthesis: I. Electrochemical aspects and identification

A new method for the electrochemical synthesis and surface-functionalization of magnetite nanoparticles (NPs) with poly(amidehydroxyurethane) (PAmHU) is presented. Transmission Electron Microscopy shows the formation of NPs PAmHU cluster systems with individual NPs ranging in size from 6 to 42 nm. Electron Spectroscopy for Chemical Analysis, Electron Paramagnetic Resonance measurements, and X-ray Diffraction show that the electrochemically synthesized product contains NPs formed by a core-coating polymer system with an inner-core consisting of magnetite entities with crystallites dimensions within 6 to 11 nm. The resulting functionalized NPs are water-soluble and stable for months.     

Simultaneous synthesis of TiO2 microrods in situ decorated with Ag nanoparticles and their bactericidal efficiency

In this study, we report a simple and cost-effective method for in situ decoration of Ag NPs onto nanoporous TiO₂ microrods by one medium (ethylene glycol) that can produce two different morphologies. In order to investigate the morphology, phase composition, crystalline structure, and chemical state (valency) of samples before and after annealing in air at different temperatures, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) were performed. The present results show that the size, morphology and crystallinity of both Ag NPs and TiO₂ microrod substrate depend on the post-annealing treatment temperatures. The annealed Ag–TiO₂ NP/microrod composites show large inhibition zones against E. coli bacteria. The obtained Ag–TiO₂ composites have the potential for use as a novel antibacterial material and in water treatment applications.     

Synthesis of CdSe and CdSe/TiO2 nanoparticles under multibubble sonoluminescence condition

CdSe and CdSe/TiO₂ nanoparticles were synthesized under multibubble sonoluminescence (MBSL) condition. The influences of TiO₂ introduced as the sensitizer on the morphology and crystal transformation were investigated. The morphology, phase and optical properties of the final products have been characterized by X-ray powder diffraction, transmission electron microscope, UV-vis absorption spectroscopy and photoluminescence spectroscopy. The results showed that as-prepared nanoparticles are well-crystallized, and the suppression of crystal pattern transition as well as the control of CdSe crystal growth can be implemented by coupling of TiO₂ semiconductor. Furthermore, the possible growth mechanism for different morphologies and crystal phases of the nanocrystals were also discussed.     

Synthesis of composite gold/tin-oxide nanoparticles by nano-soldering

Composite Au–SnO₂ nanoparticles (NPs) are synthesized by nano-soldering of pure Au and SnO₂ NPs. The multi-step process involves synthesis of pure Au and SnO₂ NPs separately by nanosecond pulse laser ablation of pure gold and pure tin targets in deionized water and post-ablation laser heating of mixed solution of Au colloidal and SnO₂ colloidal to form nanocomposite. Transmission Electron Microscopy (TEM) and High-Resolution Transmission Electron Microscopy (HRTEM) were used to study the effect of laser irradiation time on morphology of the composite Au–SnO₂ NPs. The spherical particles of 4 nm mean size were obtained for 5 min of post-laser heating. Increased mean size and elongated particles were observed on further laser heating. UV–vis spectra of Au–SnO₂ nanocomposites show red shift in the plasmon resonance absorption peak and line shape broadening with respect to pure Au NPs. The negative binding energy shift of Au 4f_7/2 peak observed in X-ray Photoelectron Spectra (XPS) indicates charge transfer in the nano-soldered Au–SnO₂ between gold and tin oxide and formation of soldered nanocomposite.     

Facile synthesis of multifunctional Ag/Fe3O4-CS nanocomposites for antibacterial and hyperthermic applications

Nanocomposites containing two or more functional constituents are attractive candidates for advanced nanomaterials. In this study, multifunctional Ag/Fe₃O₄-CS nanocomposites were successfully prepared, using chitosan as a stabilizing and cross-linking agent. The as-synthesized nanocomposites were characterized by Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM), X-ray diffraction (XRD), Energy-dispersive X-ray spectroscopy (EDS), UV–visible spectrophotometer (UV–Vis) and vibrating sample magnetometer (VSM). The results demonstrated that Ag/Fe₃O₄-CS composite nanoparticles (NPs) were composed of parent components, Fe₃O₄ and Ag NPs, which were uniformly dispersed in the chitosan matrix. The hybrid NPs exhibited strong antibacterial property against Pseudomonas aeruginosa. With high magnetization value (67 emu/g), the synthesized Ag/Fe₃O₄-CS composite can be easily separated or recycled in potential biomedical applications. Furthermore, the results showed that the multicomponent hybrid nanostructures appeared to be the promising material for local hyperthermia, which can be used as thermoseeds for localized hyperthermia treatment of cancers.     

Surface-initiated atom transfer radical polymerization from TiO2 nanoparticles

Two kinds of hydrophilic polymers, poly(oxyethylene methacrylate) (POEM) and poly(styrene sulfonic acid) (PSSA), were grafted from TiO₂ nanoparticles via the surface-initiated atom transfer radical polymerization (ATRP) technique. Chlorine modified TiO₂ nanoparticles (TiO₂-Cl), the ATRP initiators, were synthesized by the reaction of -OH in TiO₂ with 2-chloropropionyl chloride (CPC). FT-IR, UV-vis spectroscopy and X-ray photoelectron spectroscopy (XPS) clearly showed that the polymer chains were successfully grafted from the surface of TiO₂ nanoparticles. The hydrophilically modified TiO₂ nanoparticles have a better dispersion in alcohol than unmodified nanoparticles, as revealed by transmission electron microscopy (TEM). It was also found that the polymer grafting did not significantly alter the crystalline structure of the TiO₂ nanoparticles according to the X-ray diffraction (XRD) patterns. Grafting amounts were 10% of the weight for both TiO₂-POEM and TiO₂-PSSA nanoparticles, as determined by thermogravimetric analysis (TGA).     

Facile fabrication of Zn/Zn5(OH)8Cl2·H2O flower-like nanostructure on the surface of Zn coated with poly (N-methyl pyrrole)

Zn/Zn₅(OH)₈Cl₂·H₂O flower-like nanostructures was electrodeposited on the coated Zn with poly (N-methyl pyrrole) in 0.1 M Zn (NO₃)₂ and 0.1 M KCl solution. The morphology and the structure of the Zn/Zn₅(OH)₈Cl₂·H₂O were characterized by Field Emission Scanning Electron Microscopy (FESEM), Fourier transform infrared (FT-IR) spectroscopy and X-ray diffraction analysis (XRD). The FT-IR results showed special peaks at 908 and 728 cm⁻¹ related to Zn₅(OH)₈Cl₂·H₂O. The FESEM results indicated that Zn/Zn₅(OH)₈Cl₂·H₂O consists of a flower-like nanostructure and these flower-shaped structures contain many shaped nanopetals with the thickness of 27.8 nm. The XRD result confirmed that the major phase of electrodeposited product in 0.1 M KCl as supporting electrolyte was Zn₅(OH)₈Cl₂·H₂O. The ability of PMPy to create a thin film and the existence of several pores in its matrix act as a mold for the growth of Zn/Zn₅(OH)₈Cl₂·H₂O flower-like nanostructure. The trapping of Cl⁻ and OH⁻ within pores can be considered as the reason for the formation of flowerlike Zn/Zn₅(OH)₈Cl₂·H₂O nanostructures in 0.1 M KCl.     

Titania surface modification and photovoltaic characteristics with tungsten oxide

WO₃-coated TiO₂ film was prepared by depositing TiO₂ suspension containing small amounts of ammonium tungstate solution. The morphology and structure of the samples were characterized with high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and photoluminescence (PL) emission spectrum. The results showed that WO₃ formed a coating layer on surface of TiO₂ and significantly reduced the surface traps of TiO₂ nanoparticles. Transient photovoltage and electrochemical impedance measurements (EIS) were employed to study the charge separation/recombination process. The results revealed that the charge recombination was greatly retarded and the electron lifetime was increased due to the coating layer of WO₃. These observations showed good correlation with current-voltage analyses of dye-sensitized solar cell fabricated from these films, with WO₃ overlayer resulting in an increase in open-circuit voltage of up to 37 mV and 11% improvement in overall device efficiency.     

Fabrication of flower-shaped Bi2O3 superstructure by a facile template-free process

A novel flower-shaped Bi₂O₃ superstructure has been successfully synthesized by calcination of the precursor, which was prepared via a citric acid assisted hydrothermal process. The precursor and Bi₂O₃ were characterized with respect to morphology, crystal structure and elemental chemical state by field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). It was shown that both the precursor and Bi₂O₃ flower-shaped superstructure were constructed of numerous nanosheets while the nanosheets consisted of a great deal of nanoparticles. Furthermore, key factors for the formation of the superstructures have been proposed; a mechanism for the growth of the superstructure has been presented based on the FESEM investigation of different growth stages.     

Controlled synthesis of TiO2-B nanowires and nanoparticles for dye-sensitized solar cells

Controllable synthesis of the TiO₂-B nanowires (NWs) and nanoparticles (NPs) had been achieved via a facile hydrothermal route, respectively, only by tuning the solution volume. The dye-sensitized solar cells prototypes had been fabricated using TiO₂-B NW and NP electrodes, respectively. The TiO₂-B NP cells had higher photocurrent and photoelectrical conversion efficiency than the TiO₂-B NW cells though the latter exhibited larger photovoltage compared to the former. The key factors such as the photogenerated electron injection drive force, surface defects and the interfacial charge transfer, which determined the photoelectrical properties, had been systematically researched with the surface photovoltage spectra (SPS) and the electrochemical impedance spectra (EIS). The SPS proved that there was larger photoelectron injection drive force in TiO₂-B NP photoelectrode than that in NW photoelectrode. And the electrochemical impedance spectra (EIS) revealed that TiO₂-B NP cells had faster interface charge transfer compared to TiO₂-B NW cells. Both proved that NP cells had the higher photocurrents.     

The dispersion study of TiO2 nanoparticles surface modified through plasma polymerization

In this study, the surface of TiO₂ nanoparticles was modified through plasma polymerization, which is a dry coating method at room temperature. The surface morphology of TiO₂ nanoparticles was characterized by high-resolution transmission electron microscope (HRTEM). The dispersion behavior of TiO₂ nanoparticles in water and ethyl glycol was investigated by laser size distribution and ultraviolet–visible absorption spectrum. TiO₂ nanoparticles were coated with a thin film through plasma polymerization, which prevents the agglomeration and improves the dispersion behavior of TiO₂ nanoparticles.     

Influence of fullerene derivative replacement with TiO2 nanoparticles in organic bulk heterojunction solar cells

In an effort to develop hybrid organic solar cells with improved power conversion efficiency (PCE), devices based on poly (3-hexylthiophene) (P3HT):phenyl C₆₁-butyric acid methyl ester (PCBM) active layer and poly (3,4-ethylenedioxythiophene) (PEDOT):poly (styrenesulfonate) (PSS) buffer layers were prepared. A systematic replacement of PCBM was achieved by introducing nanostructured TiO₂ (∼15 nm particle size), dissolved separately in chlorobenzene (CB) and 1,2 –dichlorobenzene (DCB), to the (P3HT:PCBM) active layer while keeping a fixed amount for P3HT. To understand the effect of fullerene replacement with the inorganic metal oxide nanoparticles on different properties of resulting devices, a variety of techniques such as Current–Voltage (J–V) characteristics, Field Emission Scanning Electron Microscopy (FESEM), Atomic Force Microscopy (AFM), Ultravoilet-Visible (UV–Vis) Spectrophotometry and External Quantum Efficiency (EQE) were employed. The addition of TiO₂ nanoparticles in the active layer improved the power conversion efficiency (PCE) of P3HT:PCBM devices. The addition of TiO₂ nanoparticles using CB as solvent enhanced the absorption in visible region and also introduced a red shift in the absorption spectra. A significant increase in EQE was observed for devices with TiO₂ nanoparticles in the active layer. Mixing TiO₂ also increased the surface roughness of the active layer where TiO₂ nanoparticles were found to agglomerate as their concentration increased relative to fullerene derivative. A complete agglomeration of TiO₂ was observed in the absence of PCBM.     

Light-induced antifungal activity of TiO2 nanoparticles/ZnO nanowires

Antifungal activity of TiO₂/ZnO nanostructures under visible light irradiation was investigated. A simple chemical method was used to synthesize ZnO nanowires. Zinc acetate dihydrate, Polyvinyl Pyrrolidone and deionized water were used as precursor, capping and solvent, respectively. TiO₂ nanoparticles were deposited on ZnO nanowires using an atmospheric pressure chemical vapor deposition system. X-ray diffraction pattern of TiO₂/ZnO nano-composite has represented the diffraction peaks relating to the crystal planes of the TiO₂ (anatase and rutile) and ZnO. TiO₂/ZnO nanostructure antifungal effect on Candida albicans biofilms was studied and compared with the activity of TiO₂ nanoparticles and ZnO nanowires. The high efficiency photocatalytic activity of TiO₂ nanoparticles leads to increased antifungal activity of ZnO nanowires. Scanning electron microscope was utilized to study the morphology of the as prepared nanostructures and the degradation of the yeast.     

Oriented single crystalline TiO2 nano-pillar arrays directly grown on titanium substrate in tetramethylammonium hydroxide solution

Oriented single crystalline titanium dioxide (TiO₂) nano-pillar arrays were directly synthesized on the Ti plate in tetramethylammonium hydroxide (TMAOH) solution by one-pot hydrothermal method. The samples were characterized respectively by means of field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and X-ray diffraction (XRD). Results showed that the TiO₂ nano-pillar with a tetrahydral bipyramidal tip grew vertically on the titanium substrate. HRTEM and Raman results confirmed that the TiO₂ nano-pillar arrays were single crystalline anatase. The controls of morphology, size, and orientation of the nano-pillar could be achieved by varying the solution concentration and hydrothermal temperature. Furthermore, the special morphology of the TiO₂ nano-pillar arrays was caused by the selectively absorption of the tetramethylammonium (TMA) through hydrogen bonds on the lattice planes parallel to (0 0 1) of anatase TiO₂. Less grain boundaries and direct electrical pathway for electron transferring were crucial for the superior photoelectrochemical properties of the single anatase TiO₂ nano-pillar arrays. This approach provides a facile in situ method to synthesize TiO₂ nano-pillar arrays with a special morphology on titanium substrate.     

Deposition and characterization of binary Al2O3/SiO2 coating layers on the surfaces of rutile TiO2 and the pigmentary properties

Binary Al₂O₃/SiO₂-coated rutile TiO₂ composites were prepared by a liquid-phase deposition method starting from Na₂SiO₃·9H₂O and NaAlO₂. The chemical structure and morphology of binary Al₂O₃/SiO₂ coating layers were investigated by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, TG-DSC, Zeta potential, powder X-ray diffraction, and transmission electron microscopy techniques. Binary Al₂O₃/SiO₂ coating layers both in amorphous phase were formed at TiO₂ surfaces. The silica coating layers were anchored at TiO₂ surfaces via Si-O-Ti bonds and the alumina coating layers were probably anchored at the SiO₂-coated TiO₂ surfaces via Al-O-Si bonds. The formation of continuous and dense binary Al₂O₃/SiO₂ coating layers depended on the pH value of reaction solution and the alumina loading. The binary Al₂O₃/SiO₂-coated TiO₂ composites had a high dispersibility in water. The whiteness and brightness of the binary Al₂O₃/SiO₂-coated TiO₂ composites were higher than those of the naked rutile TiO₂ and the SiO₂-coated TiO₂ samples. The relative light scattering index was found to depend on the composition of coating layers.     

CO oxidation of bare and TiO2-coated NiO-Ni(OH)2 nanoparticles

CO oxidation reactivity of bare and TiO₂-coated nanoparticles consisting of both NiO and Ni(OH)₂ surfaces was studied. For the deposition of TiO₂, atomic layer deposition was used, and formation of three-dimensional domains of TiO₂ on NiO-Ni(OH)₂ could be identified. Based on the data of X-ray Photoelectron Spectroscopy, we suggest that upon TiO₂ deposition only Ni(OH)₂ was remained on the surface, whereas NiO surface disappeared. Both CO adsorption and CO oxidation took place on NiO-Ni(OH)₂ surfaces under our experimental conditions. CO adsorption was almost completely suppressed after TiO₂ deposition, whereas CO oxidation activity was maintained to large extent. It is proposed that bare NiO cannot be active for CO oxidation, and can only uptake CO under our experimental condition, whereas hydroxylated surface of NiO can be active for CO oxidation.