圆盘状Bi2WO6-BiPO4异质结的水热合成及光催化性能 (cited: 1)

采用水热法制备Bi₂WO₆-BiPO₄异质结光催化剂．利用模拟太阳光照射下的罗丹明B降解实验评价了Bi₂WO₆-BiPO₄复合物的光催化性能．结果表明,Bi₂WO₆-BiPO₄光催化活性比Bi₂WO₆和BiPO₄高得多．当Bi₂WO₆与BiPO₄的摩尔比为1:1时复合光催化剂对罗丹明B的降解率最高．Bi₂WO₆-BiPO₄催化活性增强主要归结为两者之间形成了有效的异质结结构,其内建电场能够促进光生载流子的分离．同时,Bi₂WO₆的加入增强了其对可见光的吸收．研究表明O₂· ^-和h⁺在光催化降解过程中是主要的活性物种     

Effect of surface species on Cu-TiO2 photocatalytic activity

The Cu-TiO₂ nanoparticles with different Cu dopant content were prepared by sol-gel method. The structure of the as-prepared catalysts and the surface species of Cu-TiO₂ were determined using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and diffuse reflection spectroscopy (DRS). The relationship between the photocatalytic activity and the surface species of Cu-TiO₂ was revealed via the measurement of surface photovoltage spectroscopy (SPS) as well as the degradation of the rhodamine B (RhB). The experimental results suggest that the Cu-TiO₂ photocatalysts with appropriate content of Cu (about 0.06 mol%) possess abundant electronic trap, which effectively inhibits the recombination of photoinduced charge carriers, improving the photocatalytic activity of TiO₂. While at high Cu dopant region (>0.06 mol%), the excessive oxygen vacancies and Cu species can become the recombination centers of photoinduced electrons and holes. Meanwhile, at heavy Cu doping concentration, excessive P-type Cu₂O can cover the surface of TiO₂, which leads to decrease in the photocatalytic activity of photocatalyst. The photocatalytic experimental results are in good agreement with the conclusions of SPS measurements, indicating that there is a close relationship between the photocatalytic activity and the intensity of SPS spectra.     

三元异质结构Ag-Bi2MoO6/BiPO4光催化剂高效降解苯酚红

多组分复合体系有利于电荷的有效分离,减少电子空穴对的复合几率。通过低温液相法首次合成Ag-Bi₂MoO₆/BiPO₄三元异质结构光催化剂。利用XRD、SEM、EDX及XPS等技术对样品进行了表征。结果表明,Ag纳米粒子光照积累在Bi₂MoO₆/BiPO₄的表面,通过表面等离子共振增加对可见光的吸收,同时作为电子受体促进了光生电子的转移。Ag、BiPO₄和Bi₂MoO₆形成三元异质结构有效地抑制了光生电子空穴对的复合。Ag-Bi₂MoO₆/BiPO₄表现出优异的光催化性能,其光催化活性较BiPO₄、Bi₂MoO₆和Bi₂MoO₆/BiPO₄样品有较大提高。并且对Ag-Bi₂MoO₆/BiPO₄三元异质结构的光催化机制进行了讨论。光催化过程中反应活性物种捕获实验结果表明h⁺和O₂^·-是主要的活性基团.     

Characterization and photocatalytic activity of Zn–TiO2/AC composite photocatalyst

Activated carbon (AC) supported Zn²⁺–TiO₂ photocatalyst was prepared by sol–gel method. The prepared samples were characterized by X-ray diffraction, scanning electron micrograph, nitrogen absorption, diffuse reflectance UV/VIS and X-ray photoelectron spectroscopy. Using toluene as a pollution target, the photocatalytic activity of photocatalyst was evaluated. The results showed that prepared photocatalyst was obviously helpful for the removal of toluene in air. The photocatalytic degradation of toluene by Zn²⁺–TiO₂/AC reached 100% for 40 min and remained 75% after 160 min, while degradation by TiO₂ was only 30%. It indicated that the photocatalytic activity of prepared photocatalyst was enhanced. It is due to Zn²⁺-doping increased the oxidation and reduction of hole–electron pairs, which was the important factor in heterogeneous photocatalysis.     

Solid state synthesis of nonstoichiometric Bi<Subscript>2</Subscript>WO<Subscript>6</Subscript>/Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> composites as visible-light photocatalyst

Nonstoichiometric Bi₂WO₆ photocatalyst with the composition of Bi_2?+?x WO_6?+?1.5x (?0.25 ≤ x ≤ 1) wa synthesized by a facile solid state reaction method. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and UV-vis absorption spectrum. The Bi_2.5WO_6.75 photocatalyst showed excellent visible-light-driven photocatalytic performance; nearly 100 % of RhB (10 ppm, pH?=?3?~?4) was decomposed within 25 min, which demonstrated that nonstoichiometric semiconductors could be an efficient visible-light-driven photocatalyst.     

Photophysical and enhanced daylight photocatalytic properties of N-doped TiO2/g-C3N4 composites

N-doped TiO₂/C₃N₄ composite samples were synthesized by heating the mixture of the hydrolysis product of TiCl₄ and C₃N₄ at different weight ratios. The samples were characterized by X-ray diffraction (XRD), Raman spectrum, UV–vis absorption spectrum, photoluminescence spectrum, X-ray photon electron spectrum (XPS) and surface photovoltage spectrum (SPS). The XRD and Raman results indicate that the introduction of C₃N₄ could inhibit the formation of rutile TiO₂. The composite samples show slight visible light absorption due to the introduction of C₃N₄. The XPS result reveals that some amount of nitrogen is doped into TiO₂, and C₃N₄ exists in the composite sample. The intensities of the SPS signal in the composite samples decrease with the rise in the amount of C₃N₄ in the samples. The photocatalytic activity was evaluated from the Rhodamine B (RhB) degradation under fluorescence light irradiation. The composite samples show significantly enhanced photocatalytic activities and the RhB self-sensitized photodegradation in this system was observed by measuring the photocurrent in the dye sensitized solar cell using the composite as the working electrode.     

Facile synthesis and photocatalytic activity of hierarchical WO3 core–shell microspheres

In this work, we present a facile template-free precipitation method for the large-scale preparation of hierarchical WO₃ core–shell microspheres in which the core was composed of aggregated nanoparticles encapsulated by a hierarchical shell layer self-assembled by ultrafine nanoplates with a thickness of about 15 nm. The products are characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), differential scanning calorimetry and thermogravimetry (TG/DSC). The experimental parameters affecting the morphology were discussed in detail. We found that the concentration of citric acid and pH value of the reaction solution had profound effects on the morphology of the products. In addition, a formation mechanism was proposed for producing hierarchical WO₃ core–shell microspheres. Furthermore, the obtained hierarchical WO₃ core–shell microspheres showed superior photocatalytic activities for the degradation of rhodamine B (RhB) under visible light irradiation.     

Aerosol-assisted flow synthesis of WxTi1−xO2 solid solution spheres with enhanced photocatalytic activity

In this paper, W_xTi_1−xO₂ solid solutions (x = 0.000, 0.005, 0.010, 0.015, and 0.020) microspheres were synthesized with an aerosol-assisted flow synthesis method. The resulting samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen sorption, UV-vis diffuse reflectance spectrum (DRS) and X-ray photoelectron spectroscopy (XPS). The photocatalytic activities of the as-prepared catalysts were measured by the degradation of rhodamine B (RhB) under visible light irradiation (λ ≥ 420 nm). All the solid solutions exhibited higher photocatalytic activities than pure TiO₂ and the W_0.015Ti_0.985O₂ solid solution possessed the highest photocatalytic activity. The degradation constant of RhB on W_0.015Ti_0.985O₂ solid solution catalyst was about 15 times of that of the pure TiO₂ and 25 times of that of Degussa P25, respectively. This study provides an effective method to prepare visible light photocatalysts on a large scale.     

Preparation, structure and photo-catalytic performances of hybrid Bi2SiO5 modified Si nanowire arrays

Bi₂SiO₅ modified Si nanowire array films were fabricated as photo-catalysts via dip-coating Bi(NO₃)₃ on silver-assisted electroless wet chemical etching Si nanowires and subsequently annealing. The structures and morphologies of as-prepared samples are characterized by X-ray diffraction, Fourier transform infrared spectrum, scanning electron microscopy and transmission electron microscopy. The results of photocatalytic experiments indicated that the Bi₂SiO₅ modified Si nanowire arrays benefit the improvement for efficient electron-hole separation and photo-catalytic stability, thereby possessing superior photo-degradation performance. These hybrid nanowire arrays will be promising materials for photo-catalysts and degradation agents.     

网状钼酸铋的可见光催化活性

采用无助剂、无模板的水热法成功合成网状Bi₂MoO₆. pH值对这一形貌的形成起重要作用. 所制备的网状Bi₂MoO₆样品表现出优异的可见光催化活性,其光催化活性比固相法合成的块状Bi₂MoO₆样品高得多.     

Enhancement of photocatalytic degradation of polyethylene plastic with CuPc modified TiO2 photocatalyst under solar light irradiation

Solid-phase photocatalytic degradation of polyethylene (PE) plastic, one of the most common commercial plastic, over copper phthalocyanine (CuPc) modified TiO₂ (TiO₂/CuPc) photocatalyst was investigated in the ambient air under solar light irradiation. Higher PE weight loss rate, greater texture change; more amount of generated CO₂, which is the main product of the photocatalytic degradation of the composite PEC plastic can be achieved in the system of PE-(TiO₂/CuPc) in comparison with PE-TiO₂ system. The CuPc promoted charge separation of TiO₂ and enhanced the photocatalytic degradation of PE based on the analysis of surface photovoltage spectroscopy (SPS). During the photodegradation of PE plastic, the reactive oxygen species generated on TiO₂ or TiO₂/CuPc particle surfaces play important roles. The present study demonstrates that the combination of polymer plastic with TiO₂/CuPc composite photocatalyst in the form of thin film is a practical and useful way to photodegrade plastic contaminants under solar light irradiation.     

La掺杂对Bi4Ti3O12薄膜铁电性能的影响

利用Sol-Gel法在Pt/Ti/SiO₂/Si衬底上制备出Bi₄Ti₃O₁₂和Bi_3.25La_0.75Ti₃O₁₂薄膜，研究了La掺杂对Bi₄Ti₃O₁₂薄膜的晶体结构、铁电性能和疲劳特性的影响，发现La掺杂没有改变Bi₄Ti₃O₁₂薄膜的基本晶体结构，并且提高了Bi₄Ti₃O₁₂铁电薄膜的剩余极化值和抗疲劳性能，对La掺杂改善Bi₄Ti₃O₁₂铁电薄膜性能的机理进行了讨论. 关键词： 铁电性能 4Ti₃O₁₂薄膜')" href="#">Bi₄Ti₃O₁₂薄膜 3.25La_0.75Ti₃O₁₂薄膜')" href="#">Bi_3.25La_0.75Ti₃O₁₂薄膜 sol-gel法 La掺杂     

Synergistic effect of efficient adsorption g-C3N4/ZnO composite for photocatalytic property

Novel g-C₃N₄/ZnO composite photocatalyst was synthesized from an oxygen-containing precursor by direct thermal decomposition urea in air without any other templates assistance. Different percentages of g-C₃N₄ were hybridized with ZnO via the monolayer-dispersed method. The prepared g-C₃N₄/ZnO composites were characterized by XRD, SEM, UV–vis diffuse reflectance spectra (DRS), FT-IR, TEM and XPS. The composites showed much higher efficiency for degradation of Rhodamine B (RhB) than ZnO under UV and visible light irradiation. Especially, the photocatalytic efficiency was the highest under UV light irradiation when the percentage of g-C₃N₄ was 6%. The improved photocatalytic activity may be due to synergistic effect of photon acquisition and direct contact between organic dyestuff and photocatalyst. Then, effective separation of photogenerated electron–hole pairs at the interface of g-C₃N₄ is an important factor for improvement of photocatalytic activity. This work indicates that g-C₃N₄ hybrid semiconductors photocatalyst is a promising material in pollutants degradation.     

Photoelectrocatalytic degradation of organic contaminants at Bi2O3/TiO2 nanotube array electrode

In the current work, TiO₂ nanotube array was prepared via electrochemical anode method. Then the Bi₂O₃ nanoparticles were deposited onto the TiO₂ nanotube array via dip-coating method from an amorphous complex precursor. The crystal structures were characterized via X-ray diffraction analysis. Their surface textures were observed via electron-scanning microscope. The prepared composite array electrode exhibited high photoelectrocatalytic activities towards degrading organic contaminants under visible light irradiation. High photoelectrocatalytic activities were also exhibited under UV light irradiation. The catalytic mechanism was discussed based on the analysis of electrochemical and degradation kinetics results. It is suggested a P (Bi₂O₃)-N (TiO₂) junction was formed to increase the catalytic activates. The stability of the electrode materials was confirmed finally.     

Hydrothermal synthesis of C-doped Zn3(OH)2V2O7 nanorods and their photocatalytic properties under visible light illumination

A visible light-driven photocatalyst, C-doped Zn₃(OH)₂V₂O₇, prepared by a hydrothermal method was studied. The as-prepared catalyst was characterized by SEM, XRD, DRS, and XPS, and exhibited efficient photocatalytic activity in the degradation of methylene blue (MB) under visible-light irradiation. Besides decoloring, the decomposition of MB was also observed, further demonstrating the performance of the photocatalyst. The carbon existing on the surface of Zn₃(OH)₂V₂O₇ nanorods was free and in carbide form. Dye degradation followed first-order kinetics, and was explained on the basis of the Langmuir-Hinshelwood mechanism.     

石墨相氮化碳的制备条件优化用以提高其在可见光下的光催化活性

通过染料的光降解实验和敏感性数学分析探讨了石墨相氮化碳(g-C₃N₄)的制备条件与其稳定性和光催化活性之间的联系. 结果表明,相比于焙烧时间,焙烧温度的改变更为显著地影响了g-C₃N₄ 的光催化活性. 制备条件优化之后的g-C₃N₄在可见光照射下催化降解罗丹明B(RhB)的活性比未优化时提高了约100倍,归因于材料比表面积的增大和表面光生电子-空穴迁移速度的增强.     

Preparation of nanosized Bi<Subscript>2</Subscript>WO<Subscript>6</Subscript> using different content of starting materials and their photoactivities

A series of nanosized Bi₂WO₆ catalysts was synthesized using various starting materials, and they were characterized by X-ray diffractometry, transmission electron microscopy, and diffuse reflectance spectroscopy. Rhodamine-B (RhB) photodegradation in aqueous medium was employed as a probe reaction to test the photoactivity of the as-prepared samples. Dependence of the photocatalytic activities on different contents of the starting materials was examined under visible irradiation (λ > 400 nm). The sample prepared in the following conditions: reaction time 24 h, the pH of the solution 7, the Bi³⁺ amount in the start precipitates 5 mmol — exhibited the highest photochemical activity when the hydrothermal temperature was settled at 180°C. Published in Zhurnal Prikladnoi Spektroskopii, Vol. 76, No. 2, pp. 243–249, Martch–April, 2009.     

Preparation, characterization and visible-light photocatalytic activity of AgI/AgCl/TiO2

In this paper, a novel composite photocatalyst AgI/AgCl/TiO₂ was prepared by ion exchange method and characterized by XRD, SEM and UV-Vis spectrometry. The as-prepared AgI/AgCl/TiO₂ composites show much higher photocatalytic activity than AgCl/TiO₂ and AgI/TiO₂ under visible-light irradiation (λ > 400 nm) in the process of methyl orange (MO) degradation. When the molar percentage of AgI to initial AgCl is 20% (sample SE-20%), the maximal degradation efficiency of MO has reached 85.8% after irradiation for 120 min. The enhancement of photocatalytic activity of the composite photocatalyst AgI/AgCl/TiO₂ will be attributed to its good absorption in the visible-light region, especially low recombination rate of the electron-hole pairs based on the photoluminescence (PL) spectra investigation of AgI/AgCl/TiO₂ and the matching band structures of AgI, AgCl and TiO₂. The detection of reactive species by radical scavengers displays that O₂⁻ and H₂O₂ are the main reactive species for the degradation of MO under visible-light irradiation. Moreover, PL analysis by using terephthalic acid (TA) as a probe molecule further reveals that OH can be negligible for the degradation of MO.     

Preparation and photocatalytic property of CeO2 lamellar

A novel room temperature solid-state chemical synthesis was introduced to successfully fabricate CeO₂ samples, coupled by a polyethylene glycol 400 (PEG 400)/cetyl trimethylammonium bromide (CTAB)/sodium dodecyl sulfate (SDS). The as-prepared products were characterized by XRD, TEM, SEM, BET and UV. A study of photocatalytic degradation of the methylene blue MB under UV illumination has been carried out. It is indicated that the samples exhibit excellent photocatalytic activity. Besides, the samples assisted with surfactants possess higher photocatalytic activity than the sample without any surfactants, wherein the sample with SDS as an additive shows the highest photocatalytic activity, which is able to reach 89.6% MB degradation ratio within 60 min illumination. Moreover, the effects of important operational parameters such as initial MB concentration, catalyst loading and pH were also investigated. The above sample under the optimum conditions obtained the maximum MB degradation ratio up to 96.5%, which is higher than that of the commercial TiO₂ P25 under the same conditions. It can be concluded that CeO₂ will be a potential photocatalyst in the application of organic pollutant.     

Characterization and activity of visible-light-driven TiO2 photocatalyst codoped with lanthanum and iodine

The novel visible-light-activated La/I/TiO₂ nanocomposition photocatalyst was successfully synthesized using precipitation-dipping method, and characterized by X-ray powder diffraction (XRD), the Brunauer-Emmett-Teller (BET) method, transmission electron microscopy (TEM), thermogravimetry-differential scanning calorimetry (TG-DSC) and UV-vis diffuse reflectance spectroscopy (UV-vis DRS). The photocatalytic activity of La/I/TiO₂ was evaluated by studying photodegradation of reactive blue 19 as a probe reaction under simulated sunlight irradiation. Photocatalytic experiment results showed that the maximum specific photocatalytic activity of the La/I/TiO₂ photocatalyst appeared when the molar ratio of La/Ti was 2.0 at%, calcined at 350 °C for 2 h, due to the sample with good crystallization, high BET surface area and small crystal size. Under simulated sunlight irradiation, the degradation of reactive blue 19 aqueous solution reached 98.6% in 80 min, which showed La/I/TiO₂ photocatalyst to be much higher photocatalytic activity compared to standard Degussa P25 photocatalyst. The higher visible light activity is due to the codoping of lanthanum and iodine.