Electrochemical template-assisted fabrication of CdS micro/nanostructures

One-dimensional (1D) cadmium sulphide (CdS) nanostructures, including micro/nanorods, and nanostructures resembling flowers and cactus have been synthesized by electrochemical template deposition technique, using polycarbonate membranes, by controlling various reaction parameters. These 1D CdS nanostructures were characterized structurally through the X-ray diffraction (XRD) studies and morphologically through scanning electron microscopy (SEM). It was found that apart from the dimensions of the pores of the templates, the geometrical morphologies of the CdS 1D nanostructures were significantly influenced by the synthesizing parameters also. The optical characterization has been done by UV–visible absorption and room-temperature photoluminescence (PL) studies.     

Electrochemical template-assisted fabrication of CdS micro/nanostructures

One-dimensional (1D) cadmium sulphide (CdS) nanostructures, including micro/nanorods, and nanostructures resembling flowers and cactus have been synthesized by electrochemical template deposition technique, using polycarbonate membranes, by controlling various reaction parameters. These 1D CdS nanostructures were characterized structurally through the X-ray diffraction (XRD) studies and morphologically through scanning electron microscopy (SEM). It was found that apart from the dimensions of the pores of the templates, the geometrical morphologies of the CdS 1D nanostructures were significantly influenced by the synthesizing parameters also. The optical characterization has been done by UV–visible absorption and room-temperature photoluminescence (PL) studies.     

Synthesis and characterization of CdS/PVA nanocomposite films

A series CdS/PVA nanocomposite films with different amount of Cd salt have been prepared by means of the in situ synthesis method via the reaction of Cd²⁺-dispersed poly vinyl-alcohol (PVA) with H₂S. The as-prepared films were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), ultraviolet-visible (UV-vis) absorption, photoluminescence (PL) spectra, Fourier transform infrared spectroscope (FTIR) and thermogravimetric analysis (TGA). The XRD results indicated the formation of CdS nanoparticles with hexagonal phase in the PVA matrix. The primary FTIR spectra of CdS/PVA nanocomposite in different processing stages have been discussed. The vibrational absorption peak of CdS bond at 405 cm⁻¹ was observed, which further testified the generation of CdS nanoparticles. The TGA results showed incorporation of CdS nanoparticles significantly altered the thermal properties of PVA matrix. The photoluminescence and UV-vis spectroscopy revealed that the CdS/PVA films showed quantum confinement effect.     

One-pot solvothermal route to self-assembly of cauliflower-shaped CdS microspheres

Nearly monodispersed cauliflower-shaped CdS microspheres were prepared through a simple one-step solvothermal route on a large scale by employing sodium dodecyl sulfate (SDS) as the surfactant. Images by field emission scanning electron microscope (FESEM) and transmission electron microscope (TEM) indicate that cauliflower-shaped CdS microspheres with diameters in the range from 1.3 to 4.5 μm are assembled by nanoparticles with an average diameter of approximately 30 nm. The possible formation mechanism of the cauliflower-shaped CdS microspheres was also proposed. The photovoltaic activity of cauliflower-shaped CdS architectures has been investigated, indicating that the as-obtained CdS microspheres exhibited higher photovoltaic performance in comparison with CdS nanoparticles.     

Optical properties of cadmium sulfide nanocrystal film prepared by electrochemical synthesis at liquid-liquid interface

Dendritic nanocrystalline CdS film was deposited at liquid-liquid interface of surfactants and an electrolyte containing 4 mmol L⁻¹ cadmium chloride (CdCl₂) and 16 mmol L⁻¹ thioacetamide (CH₃CSNH₂) with an initial pH value of 5 at 15 °C by electrochemical synthesis. The nanofilm was characterized by transmission electron microscopy (TEM), field emission scanning electron microscope (FE-SEM), atomic force microscopy (AFM), ultraviolet visible (UV-vis) absorption spectroscopy and fluorescence spectroscopy. The surface morphology and particle size of the nanofilm were investigated by AFM, SEM and TEM, and the crystalline size was 30-50 nm. The thickness of the nanofilm calculated by optical absorption spectrum was 80 nm. The microstructure and composition of the nanofilm was investigated by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), showing its polycrystalline structure consisting of CdS and Cd. Optical properties of the nanofilm were investigated systematically by UV-vis absorption and fluorescence spectroscopy. A λ_onset blue shift compared with bulk CdS was observed in the absorption spectra. Fluorescence spectra of the nanofilm indicated that the CdS nanofilm emitted blue and green light. The nanocomposites film electrode will bring about anodic photocurrent during illumination, showing that the transfer of cavities produces photocurrent.     

Synthesis and optical characterization of monodispersed Mn doped CdS nanoparticles

Monodispersed Mn²⁺ doped CdS nanoparticles with average size as small as 1.8 nm have been synthesized through chemical method. The nanostructures of the prepared nanoparticles have been confirmed through X-ray diffraction (XRD), ultraviolet-visible (UV-vis) absorption and transmission electron microscope (TEM) measurements. The photoluminescence emission covering 450-650 nm of the visible region is observed under ultraviolet light excitation, from Mn²⁺ doped CdS nanoparticles dispersed in dimethyl sulfoxide (DMSO).     

A facile strategy for the fabrication of uniform CdS nanowires with high yield and its controlled morphological growth with the assistance of PEG in hydrothermal route

A series of novel wurtzite cadmium sulphide (CdS) nanowires with uniform diameter were synthesized by using a rapid and simple solvothermal route. CdS nano structures with certain morphology could be selectively produced by only varying the concentration of poly ethylene glycol (PEG) as a surfactant in the reaction system with cadmium acetate, sulphur powder and ethelynediamine (EDA). We extensively studied UV-vis absorption spectra, photoluminescence spectra after confirming CdS nanowires with diameter 24-25 nm and length ranging up to several nano meters by field emission scanning electron microscopy (FE-SEM). Therefore we may definitely propose a new formation mechanism of CdS nanowires assisted by PEG with its illustrating optical properties.     

Effect of complexing agent on the photoelectrochemical properties of bath deposited CdS thin films

In the present paper photoelectrochemical (PEC) performance of bath deposited CdS thin films based on complexing agents i.e. ammonia and triethanolamine (TEA) has been discussed. Effect of annealing has also been analyzed. The as-deposited and annealed (at 523 K for 1 h in air) films were characterized by X-ray diffraction (XRD), ultraviolet-visible (UV-vis) absorption spectroscopy, SEM, electrochemical impedance spectroscopy (EIS), and PEC properties. XRD studies revealed that the films were nanocrystalline in nature with mixed hexagonal and cubic phases. TEA complex resulted in better crystallinity. Further improvement in the crystallinity of the films was observed after air annealing. The marigold flower-like structure, in addition to flakes morphology, was observed with TEA complex, whereas for ammonia complex only flakes morphology was observed. The UV-vis absorption studies revealed that the optical absorption edge for the films with ammonia and TEA complex was around 475 nm and 500 nm, respectively. Annealing of the films resulted in red shift in the UV-vis absorption. The PEC cell performance of CdS films was found to be strongly affected by crystallinity and morphology of the films resulted due to complexing agent and annealing. The air annealed film deposited using TEA complex showed maximum short circuit current density (J_sc) and open circuit voltage (V_oc) i.e. 99 μA/cm² and 376 mV respectively, under 10 mW/cm² of illumination. The films deposited using TEA complex showed good stability under PEC cell conditions.     

Morphology-control of VO2 (B) nanostructures in hydrothermal synthesis and their field emission properties

VO₂ (B) nanostructures were synthesized via a facile hydrothermal process using V₂O₅ as source material and oxalic acid as reductant. Three nanostructures of nanorods, nanocarambolas and nanobundles were found existing in the products, and a continuous changing of morphology was found in the synthesis process, during which the proportion of these three types of nanostructures can be adjusted by altering the concentrations of oxalic acid. The microstructures were evaluated using X-ray diffraction and scanning and transmission electron microscopies, respectively. FE properties measurement of these three types of nanostructures showed that the nanobundles have the best field emission performance with a turn-on field of ∼1.4 V/μm and a threshold field of ∼5.38 V/μm. These characteristics make VO₂ (B) nanostructures a competitive cathode material in field emission devices.     

Type II hybrid structures of TiO2 nanorods conjugated with CdS quantum dots: assembly and optical properties

We developed a novel method to assemble TiO₂ nanorods conjugated with CdS quantum dots by L-cysteine molecular linker for type II semiconducting hybrid structure. The XRD patterns indicate that the CdS quantum dots perform the cubic phase structure, and TEM images show that CdS quantum dots are well dispersed on the surfaces of anatase TiO₂ nanorods with little agglomeration. The UV-vis absorption spectra reveal the bandgap alignment in type II configuration between CdS QDs and TiO₂ nanorods.     

Effect of synthesis route on the morphologies of silver nanostructures by galvanic displacement reaction

The present study is concerned with the preparation of Ag nanostructures by reduction of AgNO₃ with zinc foil by galvanic displacement reaction. The results confirm that the synthesis route has a direct influence on the morphologies of Ag nanostructures. In addition, the effect of synthesis conditions, including the concentration of AgNO₃ aqueous solutions and reaction time, are investigated. X-ray diffraction (XRD), filed emission scanning electron microscope (SEM) and UV-vis spectra are used to characterize the obtained products. A reasonable formation process of Ag nanostructures is proposed based on the characterization results.     

Synthesis and magnetic properties of CdS/α-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> hierarchical nanostructures

CdS/α-Fe₂O₃ hierarchical nanostructures, where the CdS nanorods grow irregularly on the side surface of α-Fe₂O₃ nanorods, were synthesized via a three-step process. The diameters and lengths of CdS nanorods can be tuned by changing the ethylenediamine (EDA) and Cd ion concentrations. The magnetic investigations by superconducting quantum interference device indicate that the hierarchical nanostructures have an Morin transition at lower temperature (230 K) than that of the single bulk α-Fe₂O₃ materials (263 K). Importantly, the hierarchical nanostructures exhibit weakly ferromagnetic characteristics at 300 K. A sharp peak assigned to the surface trap induced emission are observed in room temperature PL spectra. Combining with the optoelectronic properties of CdS, the CdS/α-Fe₂O₃ hierarchical nanostructures may be used as multi-functional materials for optoelectronic and magnetic devices. Supported by the National Natural Science Foundation of China (Grant Nos. 50772025 and 50872159), the Ministry of Science and Technology of China (Grant No. 2008DFR20420), the China Postdoctoral Science Foundation (Grant Nos. 20060400042 and 200801044), the Natural Science Foundation of Heilongjiang Province, China (Grant No. F200828), the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20070217002), and the Innovation Foundation of Harbin City (Grant No. RC2006QN017016)     

Sunlight photocatalytic activity of CdS modified TiO2 loaded on activated carbon fibers

To improve the photocatalytic application performances of TiO₂, in this work, firstly CdS modified Degussa P25 TiO₂ (CdS/TiO₂) composites were prepared by two methods, sol-gel method and precipitation method. Next they, sol-gel-CdS/TiO₂ (sg-CdS/TiO₂) and precipitation-CdS/TiO₂ (pp-CdS/TiO₂), were loaded on activated carbon fibers (ACFs) by dip-coating method using the sodium carboxymethyl cellulose as adhesives. The composites were characterized by XRD, UV-vis absorbance spectra, SEM, EDS and BET. The photocatalytic activities under sunlight were investigated by the degradation of methylene blue. The results showed that CdS/TiO₂ composites were mainly composed of anatase-TiO₂ and little CdS cubic phases. The absorption wavelengths of sg-CdS/TiO₂ and pp-CdS/TiO₂ composites were extended to 590 nm and 740 nm, respectively. The absorption edge had a pronounced ‘red shift’. From EDS analysis, the elemental contents of CdS/TiO₂ were mainly Ti and O and a small quantity of S and Cd. CdS/TiO₂ loaded on ACFs were in the form of small clusters, but not very uniform; compared with the original ACFs, the surface area and pore volume of CdS/TiO₂/ACFs decreased slightly, respectively, while the average pore diameter was not changed. The photodegradation rate of methylene blue under sunlight with CdS/TiO₂/ACFs composites was markedly higher than that of P25-TiO₂/ACFs, and the effect of pp-CdS/TiO₂/ACFs composites was better than that of sg-CdS/TiO₂/ACFs, when irradiated for 180 min, and the photodegradation rate of methylene blue reached to 90.1%. The photodegradation kinetics of the methylene blue fitted with the Langmuir-Hinshelwood equation. The apparent reaction rate constants of sg-CdS/TiO₂/ACFs and pp-CdS/TiO₂ were 0.0105 min⁻¹ and 0.0146 min⁻¹, respectively, which were about 1.3-1.7 times as large as that of P25-TiO₂/ACFs.     

Controlling morphology and structure of nanocrystalline cadmium sulfide (CdS) by tailoring solvothermal processing parameters

Cadmium sulfide (CdS) with different morphologies was successfully prepared by solvothermal process by controlling the processing parameters, including nature of precursor and solvent, reaction temperature and process time. X-ray diffraction patterns revealed that, in all cases highly pure and crystallized CdS with hexagonal structure were obtained. In addition, it was found that the processing parameters influence on preferable growth direction of CdS nanostructures. Field emission scanning electron microscope analysis showed that CdS nanowires with different aspect ratios were obtained (depending upon the reaction temperature and process time) in presence of sulfur powder and ethylenediamine, whereas CdS nanoparticles were produced by sulfur powder and ethanolamine. Moreover, CdS nanorods were prepared using thiourea and ethylenediamine. Transmission electron microscope image confirmed that CdS nanowire with one of the highest aspect ratio reported in the literature (i.e., 255) was achieved using sulfur powder and ethylenediamine at 200 °C reaction temperature for 72 h process time. UV–Vis absorption spectra of CdS nanostructures prepared under different conditions displayed a blue shift relative to that of bulk CdS due to the quantum size effect.     

Preparation and characterization of graphene/CdS nanocomposites

Graphene-based nanocomposites are emerging as a new class of materials that hold promise for many applications. In this paper, we present a facile approach for the preparation of graphene/CdS nanocomposites through simple reflux processes, in which thiourea (CS(NH₂)₂) and thioacetamide (C₂H₅NS) act as a sulphide source, respectively. The samples were characterized by the X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectrum (FT-IR), ultraviolet-visible (UV-vis) spectroscopy and thermogravimetry analysis. It was shown that in the nanocomposites, the CdS nanoparticles were densely and uniformly deposited on the graphene sheets, and the sulphide source used has a great influence on the morphology, structure and property of the graphene/CdS nanocomposites. The good distribution of CdS nanoparticles on graphene sheets guarantees the efficient optoelectronic properties of graphene/CdS and would be promising for practical applications in future nanotechnology.     

Luminescent CdSe and CdSe/CdS core-shell nanocrystals synthesized via a combination of solvothermal and two-phase thermal routes

A new solvothermal route has been developed for synthesizing the size-controlled CdSe nanocrystals with relatively narrow size distribution, and the photoluminescence (PL) quantum yields (QYs) of the nanocrystals can reach 5-10%. Then the obtained CdSe nanocrystals served as cores to prepare the core/shell CdSe/CdS nanocrystals via a two-phase thermal approach, which exhibited much higher PL QYs (up to 18-40%) than the CdSe core nanocrystals. The nanocrystal samples were characterized by ultraviolet-visible (UV-vis) absorption spectra, PL spectra, wide-angle X-ray diffraction (WAXD), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM).     

Co-sensitized quantum dot solar cell based on ZnO nanowire

An efficient photoelectrode is fabricated by sequentially assembled CdS and CdSe quantum dots (QDs) onto a ZnO-nanowire film. As revealed by UV-vis absorption spectrum and scanning electron microscopy (SEM), CdS and CdSe QDs can be effectively adsorbed on ZnO-nanowire array. Electrochemical impedance spectroscopy (EIS) measured demonstrates that the electron lifetime for ZnO/CdS/CdSe (13.8 ms) is calculated longer than that of ZnO/CdS device (6.2 ms), which indicates that interface charge recombination rate is reduced by sensitizing CdSe QDs. With broader light absorption range and longer electron lifetime, a power conversion efficiency of 1.42% is achieved for ZnO based CdS/CdSe co-sensitized solar cell under the illumination of one Sun (AM 1.5G, 100 mW cm⁻²).     

One-dimensional polyaniline nanostructures synthesized by interfacial polymerization in a solids-stabilized emulsion

One-dimensional polyaniline nanostructures were synthesized by interfacial polymerization in a solids-stabilized oil/water emulsion for the first time. The products were characterized with TEM, FTIR and UV-vis. FTIR analyses proved the polyaniline synthesized were of emeraldine salt form; the results of TEM showed that when MgCO₃ and CaCO₃ particles were used as emulsifiers, polyaniline nanofibers with an average diameter of 33 nm and nanotubes with an average outer diameter of 28 nm were obtained, respectively. Comparing to ordinary interfacial polymerization approach, our new route needed much less amount of oil phase and shorter polymerization time. A possible mechanism for the formation of one-dimensional polyaniline nanostructures was suggested.     

Optical and AFM study of electrostatically assembled films of CdS and ZnS colloid nanoparticles

CdS and ZnS semiconducting colloid nanoparticles coated with the organic shell, containing either SO₃⁻ or NH₂⁺ groups, were prepared using the aqueous phase synthesis. The multilayer films of CdS (or ZnS) were deposited onto glass, quartz and silicon substrates using the technique of electrostatic self-assembly. The films produced were characterized with UV-vis spectroscopy, spectroscopic ellipsometry and atomic force microscopy. A substantial blue shift of the main absorption band with respect to the bulk materials was found for both CdS and ZnS films. The Efros equation in the effective mass approximation (EMA) theoretical model allowed the evaluation of the nanoparticle radius of 1.8 nm, which corresponds well to the ellipsometry results. AFM shows the formation of larger aggregates of nanoparticles on solid surfaces.     

Synthesis of urchin-like Co3O4 hierarchical micro/nanostructures and their photocatalytic activity

Urchin-like Co₃O₄ hierarchical micro/nanostructures have been successfully synthesized by calcining urchin-like precursor CoCO₃, which are prepared by a facile hydrothermal route. The particle size of the urchin-like Co₃O₄ could be easily controlled by altering the calcination temperature. The morphology and structure of the as-prepared urchin-like products were characterized by XRD, FESEM and TEM. Photocatalytic measurement demonstrates that these urchin-like Co₃O₄ micro/nanostructures show good photocatalytic effect and their degradation efficiency is strongly dependent on their particle size. Furthermore, a plausible reaction mechanism is also proposed to illustrate the photocatalytic processes of Co₃O₄.