Thermodynamic approach to enhance the dispersion of graphene in epoxy matrix and its effect on mechanical and thermal properties of epoxy nanocomposites

Graphene-reinforced polymer nanocomposites are under intense investigation in recent years. In this work, graphene nanosheets have been prepared using chemical reduction method of graphene oxide. Graphene-reinforced epoxy nanocomposites show an enhancement in mechanical and thermal properties at 0.05 wt.% of graphene in epoxy matrix. Modification of graphene with polyvinylpyrrolidone (PVP) shows the significant enhancement in mechanical and thermal properties of epoxy nanocomposites. PVP-modified graphene nanosheets reduces the gap of enthalpic and entropic penalties and facilitates improved dispersion of graphene in epoxy matrix. In addition, enhanced dispersion of PVP-modified graphene in epoxy matrix results in better load transfer across graphene–epoxy interface. Glass transition temperature (T_g) of PVP-modified graphene epoxy nanocomposites increases as compared to pure epoxy because there exist an interaction between epoxy and PVP. Fractography study reveals the localized ductile fracture.     

氧化石墨烯/硒化锌纳米光电材料的制备及其蓝光发射特性

采用一种简单有效的原位水热合成方法,使用石墨烯氧化物（GO）作为反应物和晶体生长基底成功制备出了还原氧化石墨烯/硒化锌（r-GO/ZnSe）纳米复合材料。采用X射线粉末衍射（XRD）、透射电子显微镜（TEM）、高分辨透射电镜（HRTEM）以及红外-可见光谱（FT-IR）等方法对r-GO/ZnSe纳米复合材料进行了检测。结果表明,平均粒径在30 nm的立方闪锌矿晶体结构的ZnSe粒子均匀分散在氧化石墨烯片层上,构成纳米复合结构。 UV-Vis光谱显示,纳米复合材料的光学吸收的起始波长在445 nm附近。PL光谱显示,纳米复合材料在470 nm附近存在一个很强的发射峰。这种石墨烯基纳米复合材料在白光二极管领域中有重要的应用价值。     

Synthesis,mechanical, and barrier properties of LDPE/graphene nanocomposites using vinyl triethoxysilane as a coupling agent

Precise interface control and dispersal of graphene nanosheets in polymer hosts are challenging to develop high performance graphene-based nanocomposites due to their strong interlayer cohesive energy and surface inertia. Here, we firstly report an efficient and novel method to functionalize graphene nanosheets with vinyl triethoxysilane (VTES) and successfully blend them with low density polyethylene (LDPE) to prepare nanocomposites. Fourier transforms infrared spectra (FTIR), Raman spectra, and thermogravimetric analysis (TGA) proved that the graphene sheets were covalently bonded with VTES. The resulting nanocomposites obtained the increases of up to 27.0 and 92.8% in the tensile strength and Young’s modulus, respectively, compared to neat LDPE. The VTES–graphene not only remarkably improved the tensile strength of the composites, but also enhanced its toughness by 17.7%. Oil permeability measurements showed that the absorption ratio of toluene by the LDPE/graphene composites decreased from 56 to 39%, and its barrier properties have obviously been improved. This study opens a new route to optimize interface structures and improve the comprehensive performances of graphene–polymer nanocomposites.     

Mechanically Robust,Electrically Conductive Biocomposite Films Using Antimicrobial Chitosan‐Functionalized Graphenes

An effective way of covalently functionalizing graphene with a chitosan polymer via a nitrene chemistry is demonstrated. The biofunctionalized graphene is prepared by the chemical reduction of graphene oxide using a nitrene chemistry, and then covalently grafting chitosan to the graphene surface. The effectiveness of the biofunctionalized graphene as a reinforcing filler (4 wt%) in a chitosan polymer matrix is verified by the dramatic enhancement of the mechanical properties (breaking stress = 330%, Young's modulus = 243%) and the electrical conductivity (0.3 S m^?1) without much loss in the elongation‐at‐break. The reinforcing effect can be explained by both the homogeneous dispersion of graphene within the matrix and the strong bond arising from the intrinsically intimate contact between the graphene and the matrix. The high antimicrobial activity of the biofunctionalized graphene compared with graphene oxide and chemically reduced graphene may be because of the presence of chitosan polymer on the edges of the graphene. The strong, antimicrobial graphene‐filled composite film can be used for food packaging and for coating various biomedical devices, where bacterial surface colonization is undesirable.     

Hydrothermal synthesis of flower-like TiO2 nanocrystals/graphene oxide nanocomposites

A facile hydrothermal method has been developed to be capable of decorating graphene oxide (GO) with flower-like TiO₂ nanocrystals without using any bridging species. The flower-like TiO₂ nanocrystals were uniformly self-assembled on the surface of GO nanosheets. The photocatalytic activity experiment indicated that the prepared TiO₂/GO nanocomposites exhibited a higher photocatalytic activity for the photocatalytic degradation of rhodamine B (RB) aqueous solution under the UV illumination, this methodology made the synthesis of TiO₂/GO nanocomposites possible and may be further extended to prepare more complicated nanocomposites based on GO for technological applications.     

Probing the role of hydrolytically stable, 3-aminopropyl triethoxysilane crosslinked chitosan/graphene oxide membrane towards Congo red dye adsorption

In this investigation, the practicability of utilizing 3-aminopropyl triethoxysilane (3-APTES) crosslinked chitosan (Ch)/graphene oxide (GO) membranes were explored for adsorptive removal of anionic dyes from aqueous medium. Membranes were successfully fabricated through solution casting technique. Strong interactions amongst matrix (chitosan), 3-APTES, polyvinylpyrrolidone (PVP) and GO were confirmed by Infrared spectroscopy. Thermal stability of the chitosan was improved by adding graphene oxide and results were verified via thermogravimetric (TGA) analysis. Swelling and hydrolytic results confirmed that 2 %-Ch/PVP was a stable membrane while increasing the amount of 3-APTES in the chitosan nanocomposites membrane decreased its stability in aqueous medium. The adsorption characteristics of the membranes were evaluated by the adsorption of Congo red (CR) dye from aqueous medium. The adsorbent can remove 80% of CR from aqueous medium and follows second order kinetics. This study outlines the possibility of exploring green membranes which can be easily fit in various flow systems.     

Graphene nanosheets: Ultrasound assisted synthesis and characterization

A facile sonochemical route for the synthesis of graphene nanosheets via reduction of graphene oxide (GO) has been reported. The synthesized graphene sheets are characterized using UV–vis spectra, Fourier transform infra-red (FT-IR) spectra, transmission electron microscope, X-ray photoelectron spectra (XPS) and Raman spectroscopic techniques. The UV–vis spectroscopy results showed that the absorption peak was red shifted due to the reduction of GO into graphene. FT-IR and XPS spectra revealed the removal of oxygenated functional groups in graphene after the reduction process. Raman spectra confirmed the restoration of new sp² carbon domains in graphene sheets after the reduction. The sonochemical approach for the synthesis of graphene nanosheets is relatively fast, cost-effective and efficient as compared to other methods.     

Self-assembly of metal–organic frameworks and graphene oxide as precursors for lithium-ion battery applications

We fabricated composites of Fe₂O₃/reduced graphene oxide as lithium-ion batteries anode material with controlled structures by employing self-assembly of metal–organic frameworks (MOFs) and polymer-functionalized graphene oxide as precursors. By electrostatic interaction, the negatively charged MOFs, Prussian Blue (PB), are assembled on poly(diallyldimethylammonium chloride) (PDDA)-functionalized graphene oxide (positive charge). Then the PB cubes become FeOOH nanosheets when treated with sodium hydroxide. Upon further annealing, the FeOOH nanosheets transform to Fe₂O₃ nanoparticles while the graphene oxide become reduced graphene oxide simultaneously. It was found that the composites have good performance as anode of lithium-ion battery. This work shows a new way for self-assembling MOFs and 2D materials.     

Sonochemical synthesis and application of rhodium–graphene nanocomposite

Abstract  

Highly water dispersible rhodium–graphene nanocomposite have been successfully synthesized by the simple reduction of Rh³⁺ salt on poly(ethylene oxide)/poly(propylene oxide)/poly(ethylene oxide) (PEO/PPO/PEO) triblock copolymer or pluronic-stabilized graphene oxide (GO) nanosheets with borohydride. Rhodium nanoparticles, having average size of 1–3 nm, are homogeneously distributed through out the graphene sheets. Some porous structures of graphene sheets have also been observed after the reduction of pluronic-stabilized GO in the presence of metal ions. The material is very effective for hydrogenation of arenes, especially for benzene as the substrate material at the room temperature and 5 atm pressure of hydrogen.     

Graphene nanocomposites of CdS and ZnS in effective water purification

The present work deals with syntheses of CdS/graphene and ZnS/graphene nanocomposites by hydrothermal reaction of graphene oxide and morpholine-4-carbodithioate complex of Cd and Zn, respectively. The corresponding nanocomposites has been investigated separately as photocatalyst in the decomposition of methylene blue in the presence of UV light and also as adsorbents in the removal of Cd(II) and Pb(II) ions in contaminated water. These studies have established that CdS/graphene and ZnS/graphene are effective photocatalyst as well as effective adsorbents in the removal of Cd(II) and Pb(II) ions to an extent of 97 and 99 % by ZnS/graphene and CdS/graphene nanocomposite, respectively, under 1 g L^?1 of adsorption dose and at pH ~7. Further studies also established Langmuir model befitting for the adsorption of Pb(II) and Cd(II) ions on CdS/graphene and ZnS/graphene, respectively. The presence of interfering ions on extent of Cd(II) and Pb(II) removal has also been reported.     

In situ growth of ultrashort rice-like CuO nanorods supported on reduced graphene oxide nanosheets and their lithium storage performance

A facile refluxing strategy in aqueous solution was engaged to synthesize ultrashort rice-like CuO nanorods/reduced graphene oxide (CuO-NRs/rGO) composite. The result of the high-resolution transmission electron microscopy shows that the as-synthesized rice-like CuO nanorods have a uniform size of about 8 nm in width and 28 nm in length and are homogenously dispersed on rGO nanosheets. The CuO nanorods are uniformly dispersed and immobilized by the graphene nanosheets reduced from GO. The resultant CuO-NRs/rGO composite as anode material for lithium-ion batteries displays better electrochemical properties than those of pure CuO-NRs and rGO nanosheets. The high reversible capacity and good stability can be ascribed to the presence of rGO nanosheets.     

Solvothermal synthesis and characterization of sandwich-like graphene/ZnO nanocomposites

Graphene-based nanocomposites are emerging as a new class of materials that hold promise for many applications. In this paper, we present a general approach for the preparation of sandwich-like graphene/ZnO nanocomposites in ethylene glycol (EG) medium using graphene oxide as a precursor of graphene and zinc acetylacetonate as a single-source precursor of zinc oxide. The samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, ultraviolet-visible (UV-vis) spectroscopy and thermogravimetry analysis. It was shown that the as-formed ZnO nanoparticles with a diameter of about 5 nm were densely and uniformly deposited on both surfaces of the graphene sheets to form a sandwich-like composite structure and as a result, the restacking of the as-reduced graphene sheets was effectively prevented. The ZnO-coated graphene nanocomposites can be expected to effectively improve the photocatalysis and sensing properties of ZnO and would be promising for practical applications in future nanotechnology.     

NiCoP/rGO复合材料的合成及其性能研究

以六水合氯化镍、七水合硫酸钴、氧化石墨烯(GO)和赤磷为原料,利用原位水热法,在不添加任何表面活性剂的情况下,合成了磷化钴镍/还原氧化石墨烯(NiCoP/rGO)纳米复合材料,并通过XRD、SEM、TEM、IR、Raman等对该复合材料进行了表征.结果表明,所得复合材料由NiCoP纳米颗粒和还原氧化石墨烯片层结构组成,NiCoP纳米颗粒尺寸大约为20 nm,均匀分布在rGO片层结构表面上,同时探讨了复合材料的形成过程.另外,复合材料的吸附脱除实验表明,所得复合材料对多种染料都具有非常好的吸附作用,因此,在污水处理方面有较大的应用价值.     

Preparation and electrochemical properties of LiFePO<Subscript>4</Subscript>/graphene composites from tailoring graphene oxides

LiFePO₄/graphene composites have been prepared by using tailoring graphene oxide (GO) nanosheets as precursors. The structure and electrochemical properties of the composites were investigated by X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM), Raman microscopy, and a variety of electrochemical testing techniques. The decrease in graphene size reduces the contact resistance between activated materials, and enhances the lithium-ion transport in LiFePO₄/graphene composites. With low weight fractions of small-size graphene sheets, the composites show better electrochemical performance than those with large size graphene sheets.     

Gold nanoparticles produced by laser ablation in water and in graphene oxide suspension

The comparison between two different approaches based on the use of the laser ablation in medium to synthetise gold nanoparticles is presented and discussed. Deionised water as well as a graphene oxide (GO) suspension in deionised water have been employed as solution to produce gold nanoparticles by laser ablation. In the former case, the nanoparticles assembly has been stabilised by using surfactants, but in the latter case to avoid undesired effects the use of chemicals was not necessary and Au reduced graphene oxide (Au-rGO) nanocomposites have been obtained. The structure, size and composition of the gold nanoparticles and of the Au–rGO nanocomposites have been monitored by UV–Vis–NIR absorption spectroscopy and Raman spectroscopy, the transmission and scanning electron microscopies and the X-ray energy-dispersive spectroscopy. The presented methodology of Au rGO nanocomposites preparation could represent a green alternative on the production of metallic nanoparticles in biocompatible environment.     

Heterogeneous oxidization of graphene nanosheets damages membrane

Graphene-based materials exhibit unique properties that have been sought to utilize for various potential applications. Many studies suggest that graphene-based materials can be cytotoxic, which may be attributed to destructive effects on cell membranes.However, there still are conflicting results regarding interactions between graphene-based materials and lipid membranes. Here,through cryo-electron microscopy(Cryo-EM) and dye-leakage experiments along with in silico methods, we found that graphene oxide nanosheets induce significant membrane damage, while the effect of pristine graphene is negligible. We revealed the importance of heterogeneous oxidization of graphene-based nanosheets in damaging vesicle membranes. Moreover, that not only the oxidization degree but also the oxidization loci and membrane tension play important roles in the cytotoxicity of the graphene-based nanosheets.     

Magnetic and electromagnetic absorption properties of FeNi alloy nanoparticles supported by reduced graphene oxide

FeNi alloy nanoparticles (NPs) supported by reduced graphene oxide (RGO) (FeNi/RGO nanocomposites) were successfully synthesized through in‐situ reduction. Large amounts of sphere‐like FeNi NPs are uniformly deposited on the RGO nanosheets. The magnetic hysteresis measurement reveals the ferromagnetic behavior of the nanocomposites at room temperature. According to the electromagnetic (EM) characteristics, the FeNi/RGO nanocomposites show outstanding EM absorption properties in the 2–18 GHz range, as evidenced by the wide effective absorption bandwidth (up to 3.3 GHz, with reflection loss R_L < –10 dB) and a minimal R_L (–32 dB) at 12.4 GHz with a thickness of 1.5 mm. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Ultrasound assisted synthesis of Sn nanoparticles-stabilized reduced graphene oxide nanodiscs

Sn nanoparticles-stabilized reduced graphene oxide (RGO) nanodiscs were synthesized by a sonochemical method using SnCl₂ and graphene oxide (GO) nanosheets as precursors in a polyol medium. TEM and XPS were used to characterize the Sn-stabilized RGO nanodiscs.     

Flexible and transparent resistive switching devices using Au nanoparticles decorated reduced graphene oxide in polyvinyl alcohol matrix

We have investigated the resistive switching mechanism in solution processed Au-reduced graphene oxide-polyvinyl alcohol (PVA) nanocomposites on flexible substrates. Monodispersed gold nanoparticles (Au NPs) attached to reduced graphene oxide (RGO) in aqueous PVA solution have been synthesized using a novel one pot technique. The fabricated hybrid device showed high On/Off switching ratio more than 10³ with low operating voltages. The performance of hybrid device can be effectively enhanced over control RGO device. The switching mechanism occurs from the electrochemical reduction/oxidation process of partially reduced graphene oxide. The proposed devices reveal superior asymmetric bipolar resistive switching characteristics attractive for solution processable flexible and transparent non-volatile memory applications.     

Synthesis and Characterization of Poly(vinyl pyrrolidone)/Reduced Graphene Oxide Nanocomposite

Poly(vinyl pyrrolidone) (PVP)/reduced graphene oxide (RGO) nanocomposites were synthesized by reducing graphene oxide in the polymer matrix at different temperatures. The effects of the GO content on the properties of the nanocomposites were investigated by Fourier-transform infrared (FTIR) spectroscopy and thermogravimetric analysis (TGA). The degree of dispersion of GO in the PVP matrix was examined by field-emission scanning electron microscopy. The results showed that both GO and RGO were well dispersed in the PVP matrix. Under low filler content, the improvement of onset decomposition temperatures of PVP nanocomposites was not obviously observed, but the amounts of residual char of the PVP nanocomposites were clearly increased. In addition, the decomposition temperature peak values of the PVP nanocomposites were increased, while the peak was broadened.