One-dimensional defects in iodine adlayers on Pt(1 0 0)

One-dimensional defect structures of closed-packed adlayers of iodine on Pt(1 0 0) were studied with scanning tunneling microscopy (STM). On the terraces of the Pt(1 0 0) surface we observed rotational domains with line defects running in [0 1 0] directions, in coexistence with nearly defect-free domains. In addition to these prevailing line defects (A-defects) with a local coverage lower than that of a defect-free surface, we report on much less frequently observed line defects with higher local coverages (B- and C-defects). The strong dependence of the concentration of these defects on the adsorption temperature is governed by the decrease of the overall iodine coverage with increasing temperature. Iodine adsorption at ∼1100 K leads to self-organization of A-defects in quasi-periodic arrangements. The relevance of these defects as important structural elements of commensurate superstructures of iodine on Pt(1 0 0) is stressed.     

A frequency response study of thiophene adsorption in zeolite catalysts

The frequency response (FR) technique has been applied to study adsorption processes of thiophene (TP) on NaY zeolite and CeY zeolite. The FR spectra of TP on NaY and CeY were recorded at temperatures between 335 and 473 K and in the pressure range of 0.1-4.0 Torr. On NaY and CeY, adsorption of thiophene (TP) in the supercage is found to be the rate-controlling step and diffusion of benzene in the supercage is the rate-controlling step, respectively. On NaY, the adsorption process by π-electronic interaction of TP and adsorption via pore-filling mechanism were caught. Adsorption by π-electronic interaction is not the main sorption process but its effect is significant. While on Ce³⁺Y, the adsorption processes relating to the π-complexation and the direct forming of SM bond were observed, the adsorption by forming π-complexation is the main process. The relaxation time of the strong sorption interaction coming from the FR spectrum is two orders magnitude shorter than that of the weak adsorption process and the number of sites available for adsorption of TP in each process is calculated. The value of relaxation time reflects the ability of different processes and concentration of adsorption site. Combining the FR spectra and other methods such as isotherms and Langmuir model, thoroughly understanding of the thiophene adsorption process in zeolites can be got.     

Ge adsorption on SiC(0 0 0 1): An ab initio study

In this work we have performed an ab initio total energy investigation of the Ge adsorption process on the Si-terminated SiC(0 0 0 1)- and (3 × 3) surfaces. We find that Ge adatoms lying on the topmost sites of the and (3 × 3) surfaces represent the energetically more stable configurations at the initial stage of the Ge adsorption on the SiC(0 0 0 1) surface. The Si → Ge substitutional adsorption processes have been examined as a function of the Si and Ge chemical potentials. Increasing the Ge coverage, we verify that the formation of Ge wetting layer on the surface, and Ge nanocluster on the (3 × 3) surface are the energetically more stable configurations, in accordance with recent experimental findings.     

A scanning tunneling microscopy study of PH3 adsorption on Si(1 1 1)-7 × 7 surfaces, P-segregation and thermal desorption

PH₃ adsorption on Si(1 1 1)-7 × 7 was studied after various exposures between 0.3 and 60 L at room temperature by means of scanning tunneling microscopy (STM). PH₃-, PH₂-, H-reacted, and unreacted adatoms can be identified by analyzing empty-state STM images at different sample biases. PH_x-reacted rest-atoms can be observed in empty-state STM images if neighboring adatoms are hydrogen terminated. Most of the PH₃ adsorbs dissociatively on the surface, generating H- and PH₂-adsorbed rest-atom and adatom sites. Dangling-bonds at rest-atom sites are more reactive than adatom sites and the faulted half of the 7 × 7 unit cell is more reactive than the unfaulted half. Center adatoms are overwhelmingly preferred over corner adatoms for PH₂ adsorption. The saturation P coverage is ∼0.18 ML. Annealing of PH₃-reacted 7 × 7 surfaces at 900 K generates disordered, partially P-covered surfaces, but dosing PH₃ at 900 K forms P/Si(1 1 1)- surfaces. Si deposition at 510 K leaves disordered clusters on the surface, which cannot be reordered by annealing up to 800 K. However, annealing above 900 K recreates P/Si(1 1 1)- surfaces. Surface morphologies formed by sequential rapid thermal annealing are also presented.     

The role of Pb ions doping in the mechanism of chromate adsorption by goethite

Pure and 0.384% Pb²⁺ ions doped goethite samples were prepared in the laboratory by the coprecipitation method. The laboratory-prepared goethite samples were characterized for pH of point of zero charge (pH_pzc), surface area, XRD, TG-DTA, TEM, SEM and FTIR analysis, which suggest that the Pb²⁺ ions are incorporated into the crystals of goethite and are also present on the surface in the hydroxylated form. Chromate adsorption studies were carried out in the concentration range 0.25-2.01 mmol L⁻¹ at pH 3, 5 and 7, which show that maximum chromate is adsorbed at the lowest pH of 3 by both the samples of goethite. Effect of temperature on the adsorption of chromate, in the range 303-323 K, shows that the process of adsorption is endothermic in case of pure goethite and exothermic in case of Pb-doped goethite. The values of isosteric heat of adsorption were positive for pure goethite and negative for Pb-doped goethite, which are consistent with the effect of temperature on the process of adsorption. Langmuir isotherm was found applicable to the experimental data. FTIR analysis and equilibrium pH changes reveal that at pH 3 outersphere while at pH 5 and 7 innersphere complexation is the dominant mechanism for chromate adsorption by both the samples of goethite.     

STM study of l-serine adsorption on Cu(0 0 1)

The adsorption of l-serine on Cu(0 0 1) surface at 310 K was studied by scanning tunneling microscope (STM). l-serine molecules on the Cu(0 0 1) initially formed a domain of thick lines with a order structure along the direction on the terraces regardless of the coverage of serine. The thick lines were partly replaced by thin line along the direction, and completely disappeared in 2 h. It is considered that in these structures hydrogen bonds involved in hydroxymethyl group between adsorbates play some role in addition to intermolecular hydrogen bond between a hydrogen atom of amino group and an oxygen atom of carboxy group for alanine adsorption.     

Shell model calculations of the adsorption and diffusion of K, Cl, and KCl on KCl(0 0 1)

Equilibrium adsorption positions and diffusion pathways of the ions K⁺ and Cl⁻ as well as of the molecule KCl on the terrace of the (0 0 1) surface of KCl were determined by shell model calculations allowing relaxations of the crystal lattice in the vicinity of the adsorbed species. For the ions each one adsorption position was found, in which the ions are located above the hollow site at the center of a slightly distorted square formed by two cations and two anions of the uppermost surface layer of the KCl crystal. Adsorption energies of −1.52 eV for K⁺ and −1.61 eV for Cl⁻ were calculated. Jumps of the ions occur from these positions to adjacent hollow positions in the ±[1 0 0] and ±[0 1 0] directions with a jump distance of a₀/2. The activation energies for the jumps result as 0.142 for K⁺ and 0.152 eV for Cl⁻ and the mean diffusion lengths as and . For the KCl molecule four distinct adsorption minima with energies between −0.932 and −0.825 eV were found. Because of the smaller lattice relaxation caused by the molecule the adsorption energies are considerably lower than for the single ions. In the position with the largest adsorption energy the ions of the admolecule are again placed above adjacent hollow sites. In two more adsorption positions only one ion is at the hollow site and the other one in a top position above an oppositely charged ion of the surface. In the fourth position with the smallest adsorption energy both ions are in top positions. Jumps between the different adsorption positions proceed by rotations of the molecule, in which one of its ions remains essentially attached to a local minimum position. The diffusion and desorption of a KCl molecule was studied by a Monte Carlo method, resulting in a mean diffusion length x_s (nm) = 0.39 exp[0.84 (eV)/2kT], which agrees rather well with an experimental value of . Values for the mean stay time as well as for the surface diffusion coefficient are derived.     

Investigation of ethene adsorption on Hmordenite and modified Hmordenite by frequency response method

The frequency response (FR) technique has been applied to study adsorption mechanism of ethene in parent Hmordenite (HMor) and the HMor (CuO/HMor, Cs⁺/HMor) which were modified by CuO and Cs⁺. The FR spectra of ethene in HMor, CuO/HMor and Cs⁺/HMor were recorded at temperatures between 252 and 273 K under the pressure of 0.2-30.0 Torr, and then those FR spectra were investigated. The results showed that two parallel adsorption processes exist in ethene/HMor system. Those two processes were attributed to adsorption process of ethene on proton acid sites (low frequency adsorption) and on hydrogen cation sites (high frequency adsorption); meanwhile the number of sites available for adsorption of ethene is 0.692 and 0.828 mmol g⁻¹, respectively. The number of adsorption sites in low frequency is increased by the introduction of CuO which is located among the proton acid sites but covered the hydrogen ion sites in high frequency. Chemical adsorption of ethene is the main sorption process in CuO/HMor. The number of adsorption sites in low frequency is decreased by the introduction of Cs⁺ which counteracted proton acid sites in low frequency. Physical adsorption is the main sorption process in Cs⁺/HMor channels. The optimum content of CuO for modification is 5% (weight/weight). Combining the FR spectra and other methods such as isotherms and Langmuir model, a thorough understanding of the ethene adsorption processes on zeolites can be achieved.     

Electro-optic behavior of lithium niobate at cryogenic temperatures

The unclamped relative permittivity, , and the Pockels coefficient, , of congruent lithium niobate at a frequency f = 5760 Hz have been determined at low temperatures (7 K < T < 300 K). A He cryostat setup mounted to one arm of an electronically phase-stabilized Michelson interferometer was utilized for the measurement of . A continuous decrease in both parameters was observed as T → 0 K with limiting values of and , respectively.     

Adsorption structure of germanium on the Ru(0 0 0 1) surface

Coverage-dependent adsorption energy of the Ge/Ru(0 0 0 1) growth system and the geometrical distortions of the most stable adsorption structure are investigated through first-principles calculations within density functional theory. A local minimum in adsorption energy is found to be at a Ge coverage of 1/7 monolayer with a Ru(0 0 0 1)- symmetry. Based on this stale superstructure, the scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS) images are simulated by means of surface local-density of states (LDOS). The results are consistent well with the STM measurements on the phase for Ge overlayer on Ru(0 0 0 1). From this stimulation, the relations between the STM images and the lattice distortion are also clarified.     

A computational study on the adsorption and ring cleavage of para-chlorophenol on anatase TiO2 surface

In this work, a computational technique based on semiempirical SCF MO method MSINDO, has been used for investigation of the adsorption and photocleavage of para-chlorophenol (p-CP) molecule on the anatase TiO₂ (0 0 1) and (1 0 0) surfaces. The surfaces have been modeled with two saturated clusters Ti₂₁O₅₈H₃₂ and Ti₃₆O₉₀H₃₆. The optimization of the perpendicular conformation of p-CP molecule relative to the anatase TiO₂ (1 0 0) surface, has resulted in a linkage of the molecule to the surface titanium atom via phenolic oxygen atom. We studied the aromatic ring cleavage by singlet oxygen (¹O₂) and superoxide radical anion () and accordingly, relevant mechanisms are suggested. The results reveal that the ring opening path of p-CP molecule on TiO₂ (1 0 0) surface, following the single electron transfer/ mechanism, is energetically more favourable than the ¹O₂/dioxetane mechanism.     

Dynamics of NF3 in a condensed film on Au(1 1 1) as studied by electron-stimulated desorption

We report a low-temperature dynamics study of condensed layers of NF₃ on Au(1 1 1) by time-of-flight electron-stimulated desorption ion angular distribution (TOF-ESDIAD), temperature-programmed desorption (TPD) and low-temperature scanning tunneling microscopy (LT-STM). Upon adsorption at 30 K, molecular NF₃ adsorption occurs first at the step edges and at minor terrace defect sites with the formation of 2D islands. Within the islands, NF₃ is adsorbed in an upright conformation via the nitrogen lone pair electrons projecting fluorine atoms away from the surface as judged by the presence of only a sharp F⁺ central beam in the ESDIAD pattern. At higher coverages, 3D islands start to populate the surface. Electron bombardment of a thick NF₃ (∼6 ML) layer adsorbed on the Au(1 1 1) surface leads to emission of F⁺, N⁺, NF⁺, and ions as observed in the TOF-ESD distribution. Upon heating to ∼37 K, a sudden decrease of the and ion yield, which is not related to thermal desorption, is observed which reflects the surface migration of NF₃ molecules, leading to local thinning of the film. The thinning process occurs at the temperature of onset of molecular rotations and self-diffusion in the bulk NF₃ crystal. In this process, some NF₃ molecules move closer to the surface which results in higher efficiency for ion neutralization by the underlying metal surface. In the TPD spectra, the monolayer desorption is observed to begin at ∼65 K, exhibiting zero-order kinetics with an activation energy of 21 kJ/mol.     

Adsorption of Pb on NiAl(1 1 0): energetics and structure

The adsorption of Pb onto a NiAl(1 1 0) single crystal surface at 300 K has been studied by Auger electron spectroscopy (AES), Low energy electron diffraction (LEED), molecular beam/surface scattering and single crystal adsorption calorimetry (SCAC). AES indicates a Stranski-Krastanov growth mode, i.e., Pb initially grows on NiAl(1 1 0) two-dimensionally until the first layer completes at 0.89 ML, where a superstructure is observed by LEED, followed by 3D islanding. Measurements of the Pb gas that does not stick indicate that Pb sticks on NiAl(1 1 0) with an initial probability of 0.99. The initial heat of adsorption of Pb on NiAl(1 1 0) is 249 ± 10 kJ/mol. Due to the repulsive interactions between Pb adatoms, the heat of adsorption decreases within the first layer to a value identical to the heat of sublimation of bulk Pb (195 kJ/mol), where it remains at higher coverages. This first application of adsorption calorimetry on such a thick sample (75 μm versus 0.2-8 μm previously) demonstrates that adsorption calorimetry can be extended to a wider range of surfaces, since this thickness can be achieved with nearly any single crystal material by simple mechanical thinning.     

The local adsorption geometry and electronic structure of alanine on Cu{1 1 0}

The adsorption of alanine on Cu{1 1 0} was studied by a combination of near edge X-ray absorption fine structure (NEXAFS) spectroscopy, X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT). Large chemical shifts in the C 1s, N 1s, and O 1s XP spectra were found between the alanine multilayer and the chemisorbed and pseudo-(3 × 2) alaninate layers. From C, N, and O K-shell NEXAFS spectra the tilt angles of the carboxylate group (≈26° in plane with respect to and ≈45° out of plane) and the C-N bond angle with respect to could be determined for the pseudo-(3 × 2) overlayer. Using this information three adsorption geometries could be eliminated from five p(3 × 2) structures which lead to almost identical heats of adsorption in the DFT calculations between 1.40 and 1.47 eV/molecule. Due to the small energy difference between the remaining two structures it is not unlikely that these coexist on the surface at room temperature.     

Coadsorption of CO and C6H6 on Co(0 0 0 1)

We have studied the influence of CO on the adsorption of benzene on the Co(0 0 0 1) surface using LEED, XPS, TDS and work function measurements. CO was found to reduce the benzene adsorption, but even at saturation CO exposure no complete blocking was observed. Thermal desorption of the coadsorbed layer featured CO and H₂ peaks indicating partial dehydrogenation of benzene and retaining of the CO bond. Ordered LEED structures were found with all coverages: Pre-adsorption of CO led to patterns already seen for pure carbon monoxide adsorption. Pre-adsorption of benzene showed the known structure of pure benzene also with small CO exposures, but higher CO exposures yielded a mixture of and patterns.     

Surface phase diagram and temperature induced phase transitions of Sn/Cu(1 0 0)

Room temperature deposition of Sn on Cu(1 0 0) gives rise to a rich variety of surface reconstructions in the submonolayer coverage range. In this work, we report a detailed investigation on the phases appearing and their temperature stability range by using low-energy electron diffraction and surface X-ray diffraction. Previously reported reconstructions in the submonolayer range are p(2 × 2) (for 0.2 ML), p(2 × 6) (for 0.33 ML), ()R45° (for 0.5 ML), and c(4 × 4) (for 0.65 ML). We find a new phase with a structure for a coverage of 0.45 ML. Furthermore, we analyze the temperature stability of all phases. We find that two phases exhibit a temperature induced reversible phase transition: the ()R45° phase becomes ()R45° phase above 360 K, and the new phase becomes p(2 × 2) also above 360 K. The origin of these two-phase transitions is discussed.     

Wavelength-agile H2O absorption spectrometer for thermometry of general combustion gases

Using a novel Fourier-domain mode-locking (FDML) laser scanning 1330-1380 nm, we have developed a gas thermometer based on absorption spectroscopy that is appropriate for combustion gases at essentially arbitrary conditions. The path-integrated measurements are particularly useful in homogeneous environments, and here we present measurements in a controlled piston engine and a shock tube. Engine measurements demonstrate a RMS temperature precision of ±3% at 1500 K and 200 kHz bandwidth; the precision is improved dramatically by averaging. Initial shock tube measurements place the absolute accuracy of the thermometer within ∼2% to 1000 K. The sensor performs best when significant H₂O vapor is present, but requires only at 300 K, at 1000 K, or at 3000 K for 2% accurate thermometry, assuming a 4 kHz measurement bandwidth (200 kHz scans with 50 averages). The sensor also provides H₂O mole fraction and shows potential for monitoring gas pressure based on the broadening of spectral features. To aid in designing other sensors based on high-temperature, high-pressure H₂O absorption spectroscopy, a database of measured spectra is included.     

Modelling of phase transitions and reaction at CO adsorption on oxygen precovered Pd(1 1 1)

Using the interaction parameters up to the third neighbors and activated form of O and CO diffusion and their reaction, the model has been proposed for Monte-Carlo simulations describing the catalytic O + CO → CO₂ reaction and occurring phase transitions on Pd(1 1 1) surface. Upon adsorption of CO the pre-adsorbed oxygen transforms from p(2 × 2)_O phase into and phases in the limit of room and moderate temperatures, respectively. We demonstrate that the kinetic effects determine both the occurrence of the p(2 × 1)_O and disappearance of the phases at moderate and low temperatures, respectively. Using reaction rate as a fit parameter, we show that at room temperature the start of the reaction can be synchronized with the occurrence of phase.