Spin-wave resonance and magnetic anisotropy in FePt thin films

Ferromagnetic Resonance (FMR) measurements at room temperature and X-band microwave frequency were performed on polycrystalline FePt thin films with face-centered cubic structure. With the external field perpendicular to the film plane, the absorption fields H_n of the odd and even spin-wave resonance modes n detected for the Fe_0.44Pt_0.56(45 nm)/Si(1 0 0) and Fe_0.51Pt_0.49(105 nm)/Pt(55 nm)/MgO(1 0 0) films, were found to obey the well-known H_n×n² ratio, giving for these films the exchange stiffness constant values of 3.9×10⁻⁸ and 4.4×10^–7 erg/cm, respectively. The study of the out-of-plane angular dependence of the absorption field of the uniform FMR mode allowed the measurement of the effective magnetic anisotropy constants of 5.3×10⁶ , 6.4×10⁶ , and 6.7×10⁶ erg/cm³, related, respectively, to the [1 1 1], [1 0 0], and [1 1 0] textures present in the films.     

Methyl concentration time-histories during iso-octane and n-heptane oxidation and pyrolysis

Methyl radical concentration time-histories were measured during the oxidation and pyrolysis of iso-octane and n-heptane behind reflected shock waves. Initial reflected shock conditions covered temperatures of 1100-1560 K, pressures of 1.6-2.0 atm and initial fuel concentrations of 100-500 ppm. Methyl radicals were detected using cw UV laser absorption near 216 nm; three wavelengths were used to compensate for time- and wavelength-dependent interference absorption. Methyl time-histories were compared to the predictions of several current oxidation models. While some agreement was found between modeling and measurement in the early rise, peak and plateau values of methyl, and in the ignition time, none of the current mechanisms accurately recover all of these features. Sensitivity analysis of the ignition times for both iso-octane and n-heptane showed a strong dependence on the reaction C₃H₅ + H = C₃H₄ + H₂, and a recommended rate was found for this reaction. Sensitivity analysis of the initial rate of CH₃ production during pyrolysis indicated that for both iso-octane and n-heptane, reaction rates for the initial decomposition channels are well isolated, and overall values for these rates were obtained. The present concentration time-history data provide strong constraints on the reaction mechanisms of both iso-octane and n-heptane oxidation, and in conjunction with OH concentration time-histories and ignition delay times, recently measured in our laboratory, should provide a self-consistent set of kinetic targets for the validation and refinement of iso-octane and n-heptane reaction mechanisms.     

Effect of composition on the spontaneous emission probabilities, stimulated emission cross-sections and local environment of Tm in TeO2-WO3 glass

Effect of composition on the structure, spontaneous and stimulated emission probabilities of various 1.0 mol% Tm₂O₃ doped (1−x)TeO₂+(x)WO₃ glasses were investigated using Raman spectroscopy, ultraviolet-visible-near-infrared (UV/VIS/NIR) absorption and luminescence measurements.Absorption measurements in the UV/VIS/NIR region were used to determine spontaneous emission probabilities for the 4f-4f transitions of Tm³⁺ ions. Six absorption bands corresponding to the absorption of the ¹G₄, ³F₂, ³F₃ and ³F₄, ³H₅ and ³H₄ levels from the ³H₆ ground level were observed. Integrated absorption cross-section of each band except that of ³H₅ level was found to vary with the glass composition. Luminescence spectra of the samples were measured upon 457.9 nm excitation. Three emission bands centered at 476 nm (¹G₄→³H₆ transition), 651 nm (¹G₄→³H₄ transition) and 800 nm (¹G₄→³H₅ transition) were observed. Spontaneous emission cross-sections together with the luminescence spectra measured upon 457.9 nm excitation were used to determine the stimulated emission cross-sections of these emissions.The effect of glass composition on the Judd-Ofelt parameters and therefore on the spontaneous and the stimulated emission cross-sections for the metastable levels of Tm³⁺ ions were discussed in detail. The effect of temperature on the stimulated emission cross-sections for the emissions observed upon 457.9 nm excitation was also discussed.     

Thermal stability and switching field of hard/soft-stacked perpendicular media

The time dependence of remanence coercivity and thermal stability were investigated for hard/soft-stacked media consisting of a magnetically hard granular layer underneath a very thin soft layer with a large saturation magnetization, M_s. The values of remanence coercivity at measurement times t′=10³ and 10⁻⁵ s (pulse field) were measured, and defined as H_r and H_r^P. The remanence coercivity on the recording time scale, H_r (1 ns), and the energy barrier, ΔE/kT, were evaluated by fitting H_r and H_r^P to Sharrock's equation taking into account the power law variation of the energy barrier, n. The value of H_r (1 ns) for a (Co–Pt)–SiO₂ (9 nm)/Co–SiO₂ (2 nm) stacked medium with an interfacial coupling control layer was about 9 kOe, which was less than half of that of a (Co–Pt)–SiO₂ (9 nm) conventional medium (=21.3 kOe). The value of ΔE/kT for the stacked medium was about 111 (n=0.7), and was not significantly different from the conventional medium. Moreover, no significant difference in the rate of decrease of H_r with increasing temperature was observed between media with and without interlayers. These results indicate that the use of a thin soft layer with high M_s was effective at significantly reducing H_r with no notable change in thermal stability.     

Temperature dependence of the self-broadening coefficients of ethane

Using a diode-laser spectrometer, self-broadening coefficients have been measured at three temperatures (246.2, 226.2 and 150.2 K) for 11 spectral lines in the ν₉ fundamental band of ¹²C₂H₆. The collisional widths have been obtained by fitting each experimental absorption profile with a Rautian model. The temperature dependence exponent n was also determined for each line, and found to be constant within experimental uncertainties. The mean value is equal to n = 0.676.     

Titanium oxynitride thin films sputter deposited by the reactive gas pulsing process

DC reactive sputtering was used to successfully make thin films of titanium oxynitride using titanium metallic target, argon as plasma gas and nitrogen and oxygen as reactive gases. The nitrogen partial pressure was kept constant during every deposition whereas oxygen flow rate was pulsed using a square pattern. The study consisted in analysing the influence of the shape of the pulsed rate on physical properties of these films. In order to adjust the metalloid concentration to get films with a wide range of oxygen-to-nitrogen ratios, the reactive gas pulsing process (RGPP) was used. In this process, the oxygen flow switches “on” and “off” periodically according to a duty cycle α = t_ON/T. Electrical conductivity of films measured against temperature was gradually modified from metallic (σ_300K = 4.42 × 10⁴ S m⁻¹) to semi-conducting behaviour (σ_300K = 7.14 S m⁻¹) with an increasing duty cycle. Mechanical properties like nanohardness (H_n) and reduced Young's modulus (E_r) of the films were investigated. Experimental values of H_n and E_r obtained by nanoindentation at 10% depth ranged from 15.8 to 5.2 GPa and from 273 to 142 GPa, respectively. Evolutions of H_n and E against duty cycle were similar. A regular decrease was observed for duty cycle α ≤ 25% corresponding to the occurrence of TiO_xN_y phase. Higher duty cycles led to the smallest values of H_n and E and correlated with TiO₂ compound composition. At last, the colour variation of these titanium oxynitrides was investigated as a function of α in the L^*a^*b^* colour space. It was related to the chemical composition of the films.     

Pressure and temperature dependence of the reaction of vinyl radical with alkenes II: Measured rates and predicted product distributions for vinyl + propene

This work reports measurements of the absolute rate coefficients and Rice-Ramsperger-Kassel-Markus (RRKM) master equation (ME) simulations of the C₂H₃ + C₃H₆ reaction. Direct kinetic studies were performed over a temperature range of 300-700 K and pressures of 15, 25, and 100 Torr. Vinyl radicals were generated by laser photolysis of vinyl iodide at 266 nm, and time-resolved absorption spectroscopy was used to probe vinyl radicals through absorption at 423.2 nm. A weighted modified Arrhenius fit to the experimental rate constant is k₁ = (1.3 ± 0.2) × 10⁻¹² cm³ molecule⁻¹ s⁻¹(T/1000)^1.6 exp[−(1510 ± 80/T)]. Fifteen stationary points and 48 transition states on the C₅H₉ potential energy surface (PES) were calculated using the G3 method in Gaussian 03. RRKM/ME simulations were performed using VariFlex on a simplified PES to predict pressure dependent rate coefficients and branching fractions for the major channels. For temperatures between 350 and 700 K, the calculated rate coefficient agrees with the experimental rate coefficient within 20%. At low temperatures, the primary products are the initial adducts 4-penten-2-yl and 2-methyl-3-buten-1-yl. At higher temperatures, the dominant products are 1,3-butadiene + methyl, allyl + ethene, and 1,3-pentadiene + H. Although C₂H₃ + C₃H₆ → allyl + ethene is thermodynamically favored, the simulations predict that it does not become the dominant product until 1700 K.     

Optical properties of methane to 288 GPa at 300 K

Optical properties of solid methane (CH₄) were studied at high pressure and room temperature using a diamond anvil cell. Reflectivity and transmission measurements were used to measure the refractive index to 288 GPa. Fabry-Perot interferometery was used to measure the sample thickness to 172 GPa. This data was fitted to the derived expression of thickness vs. pressure that was then used to calculate the thickness to 288 GPa. This in turn was combined with optical absorption experiments to obtain the absorption coefficient and hence the extinction coefficient k^*. From combined reflection and absorption experiments the refractive index n=n_s+ik^* was obtained. The index of refraction and the ratio of molar refraction to molar volume showed a large increase between 208 and 288 GPa. This behavior indicated that a phase transformation of insulator-semiconductor might have occurred in solid CH₄ by 288 GPa.     

Mechanism of ignition by non-equilibrium plasma

The kinetics of ignition in stoichiometric C_nH_2n+2:O₂:Ar mixtures with 90% dilution for n = 1-5 has been studied experimentally and numerically under the action of a high-voltage nanosecond discharge. It was shown that the initiation of the discharge by a high-voltage pulse 115 kV in amplitude with a specific deposited energy of 10-30 mJ/cm³ leads to more than an order of magnitude decrease in the ignition delay time. The generation of atoms, radicals and excited and charged particles by the discharge was numerically described. The role of different atoms and radicals (O, H and C_nH_2n+1) was analyzed. The temporal evolution of the densities of intermediate components in the plasma assisted ignition was discussed.     

Synthesis and nonlinear optical characterization of SnO2 quantum dots

The present paper demonstrates the preparation and characterization of SnO₂ semiconductor quantum dots. Extremely small ∼1.1 and ∼1.4 nm SnO₂ samples were prepared by microwave assisted technique with a frequency of 2450 MHz. Based on XRD analysis, the phase, crystal structure and purity of the SnO₂ samples are determined. UV-vis measurements showed that, for the both size of SnO₂ samples, excitonic peaks are obtained at ∼238 and ∼245 nm corresponding to ∼1.1 nm (sample 1) and ∼1.4 nm (sample 2) sizes, respectively. STM analysis showed that, the quantum dots are spherical shaped and highly monodispersed. At first, the linear absorption coefficients for two different sizes of SnO₂ quantum dots were measured by employing a CW He-Ne laser at 632.8 nm and were obtained about 1.385 and 4.175 cm⁻¹, respectively. Furthermore, the nonlinear refractive index, n₂, and nonlinear absorption coefficient, β, were measured using close and open aperture Z-scan respectively using the same laser. As quantum dots have strong absorption coefficient to obtain purely effective n₂, we divided the closed aperture transmittance by the corresponding open aperture in the same incident beam intensity. The nonlinear refraction indices of these quantum dots were measured in order of 10⁻⁷ (cm²/W) with negative sign and the nonlinear absorption coefficients were obtained for both in order of 10⁻³ (cm/W) with positive sign.     

High sensitivity ICLAS of H2O in the 12,580-13,550 cm transparency window

High-sensitivity Intracavity Laser Absorption Spectroscopy (ICLAS) is used to measure the high resolution absorption spectrum of H₂¹⁸O between 12,580 and 13,550 cm⁻¹. This spectral region covers the 3v+δ polyad of very weak absorption. Four isotopologues of water (H₂¹⁸O, H₂¹⁶O, H₂¹⁷O, HD¹⁸O) are found to contribute to the observed spectrum. Spectrum analysis is performed with the aid of variational calculations and allowed for assigning 1126 lines belonging to H₂¹⁸O, while only 160 H₂¹⁸O lines are included in the HITRAN-2008 database. Altogether, 823 accurate energy levels of H₂¹⁸O are determined from transitions attributed to 26 upper vibrational states, 438 of them being reported for the first time. New information includes energy levels of four newly observed vibrational states of H₂¹⁸O: (2 4 0), (1 4 1), (0 4 2) and (2 3 1) at 13,167.718, 13,212.678, 13,403.71 and 15,073.975 cm⁻¹, respectively. H₂¹⁸O transitions involving highly excited bending states like (1 6 0), (0 6 1), (0 7 1), (1 7 0), (0 9 0) and even (0 10 0) have been identified as a result of an intensity borrowing from stronger bands via high-order resonance interactions. Thirty-six new energy levels of H₂¹⁷O, present with a 2% relative concentration in our sample, could be determined. The rotational structure of the (0 2 3) state of HD¹⁸O at 13,245.497 cm⁻¹ is also reported for the first time.     

Thermal decomposition of toluene: Overall rate and branching ratio

The two-channel thermal decomposition of toluene, C₆H₅CH₃ → C₆H₅CH₂ + H (1) and C₆H₅CH₃ → C₆H₅ + CH₃ (2), was investigated in shock tube experiments over the temperature range of 1400-1780 K at a pressure of 1.5 (±0.1) bar. Rate coefficients for reactions (1) and (2) were determined by monitoring benzyl radical (C₆H₅CH₂) absorption at 266 nm during the decomposition of toluene diluted in argon and modeling the temporal behavior of the benzyl concentration with a kinetic model. The first-order rate coefficients determined at a pressure of 1.5 bar are expressed by k₁(T) = 2.09 × 10¹⁵ exp (−87510 [cal/mol]/RT) [s⁻¹] and k₂(T) = 2.66 × 10¹⁶ exp (−97880 [cal/mol]/RT) [s⁻¹]. The resulting branching ratio, k₁/(k₁ + k₂), ranges from 0.8 at 1350 K to 0.6 at 1800 K.     

The ferroelectric and ferromagnetic characterization of CoFe2O4/Pb(Mg1/3Nb2/3)O3-PbTiO3 multilayered thin films

The multiferroic (PMN-PT/CFO)_n (n = 1,2) multilayered thin films have been prepared on SiO₂/Si(1 0 0) substrate with LNO as buffer layer via a rf magnetron sputtering method. The structure and surface morphology of multilayered thin films were determined by X-ray diffraction (XRD) and atom force microscopy (AFM), respectively. The smooth, dense and crack-free surface shows the excellent crystal quality with root-mean-square (RMS) roughness only 2.9 nm, and average grain size of CFO thin films on the surface is about 44 nm. The influence of the thin films thickness size, periodicity n and crystallite orientation on their properties including ferroelectric, ferromagnetic properties in the (PMN-PT/CFO)_n multilayered thin films were investigated. For multilayered thin films with n = 1 and n = 2, the remanent polarization Pr are 17.9 μC/cm² and 9.9 μC/cm²; the coercivity H_c are 1044 Oe and 660 Oe, respectively. In addition, the relative mechanism are also discussed.     

TiO2 activation using acid-treated vermiculite as a support: Characteristics and photoreactivity

Vermiculite was treated by sulfuric or nitric acid aqueous solutions with different concentration. These modified materials as the promising supports, were used to immobilize TiO₂. TiO₂ was prepared by the precursor, which was obtained by substituting partly isopropyl alcohol with Cl⁻ in titanium chloride {[Ti(IV)(OR)_nCl_m] (n = 2-3, m = 4 − n)}. The TiO₂/vermiculite composites were characterized by X-ray diffraction, scanning electron microscopy, and the nitrogen absorption. Their photocatalytic activity was evaluated by removal of methylene blue (MB). The pure anatase type crystalline phase was well deposited on the supports. The concentrations of acid for treatment had a significant influence on pore sizes and surface area of vermiculite. The treatment process changed microstructure of vermiculite, modified its characteristics, and farther improved the catalytic activity and absorption capacity of TiO₂/vermiculite composites. The treatment effect of nitric acid was superior to that of sulfuric acid.     

Single beam Z-scan measurement of the third order optical nonlinearities of styryl7 dye

The optical nonlinearity of styryl7 dye in ethanol solution at different concentrations has been studied using pulsed Nd:YAG laser at 532 nm as the source of excitation. The optical responses were characterized by measuring the intensity dependent refractive index (n₂) of the medium using the Z-scan technique. The open aperture Z-scan trace of the dye in solution displayed saturable absorption. The closed aperture Z-scan trace of the dye exhibited a negative nonlinearity. The styryl7 dye at 1 mM concentration exhibited nonlinear refractive co-efficient n₂ = −1.24 × 10⁻⁸ cm²/W, nonlinear absorption coefficient β = − 3.9 × 10⁻⁴ cm/W and real and imaginary parts of third-order nonlinear optical susceptibility χ³ = 3.26 × 10⁻⁶ esu in ethanol. These results showed that the dye has potential application in nonlinear optics.     

Temperature-dependent mid-IR absorption spectra of gaseous hydrocarbons

Quantitative mid-IR absorption spectra (2500-3400 cm⁻¹) for 12 pure hydrocarbon compounds are measured at temperatures ranging from 25 to 500 °C using an FTIR spectrometer. The hydrocarbons studied are n-pentane, n-heptane, n-dodecane, 2,2,4-trimethyl-pentane (iso-octane), 2-methyl-butane, 2-methyl-pentane, 2,4,4-trimethyl-1-pentene, 2-methyl-2-butene, propene, toluene, m-xylene, and ethylbenzene. Room-temperature measurements of neat hydrocarbon vapor were made with an instrument resolution of both 0.1 and 1 cm⁻¹ (FWHM) to confirm that the high-resolution setting was required only to resolve the propene absorption spectrum while the spectra of the other hydrocarbons could be resolved with 1 cm⁻¹ resolution. High-resolution (0.1 cm⁻¹), room-temperature measurements of neat hydrocarbons were made at low pressure (∼1 Torr, 133 Pa) and compared to measurements of hydrocarbon/N₂ mixtures at atmospheric pressure to verify that no pressure broadening could be observed over this pressure range. The temperature was varied between 25 and 500 °C for atmospheric-pressure measurements of hydrocarbon/N₂ mixtures (X_hydrocarbon∼0.06-1.5%) and it was found that the absorption cross section shows simple temperature-dependent behavior for a fixed wavelength over this temperature range. Comparisons with previous FTIR data over a limited temperature range and with high-resolution laser absorption data over a wide temperature range show good agreement.     

On a presence of SimHn clusters in a-Si:H/c-Si structures

Dominant aim of the paper was to verify the existence of the Si_mH_n clusters in a-Si:H layers. Thin layers were deposited by plasma-enhanced chemical vapor deposition (PECVD) on both glass and crystalline silicon substrates. Their IR and structural properties were investigated by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction at grazing incidence angle (XRDGI). We have found that the layer probably consists of larger structurally ordered parts corresponding to Si_mH_n clusters and separated groups of (Si-H_x)_N. The ordered parts could be identified as some of Si_mH_n clusters ranging from (10, 16) to (84, 64) represented by corresponding vibration frequencies in three following IR regions: 600-750, 830-900 and 2080-2180 cm⁻¹. XRDGI measurement indicates that diffraction maximum at around 2Θ = 28° can be attributed to an existing Si_mH_n cluster.     

Study of magnetization reversal of Co/Pd bit-patterned media by micro-magnetic simulation

Bit-patterned media based on a single-bit-per-island may be a promising candidate for perpendicular magnetic recording at the Tb/in² level because they could provide a lower noise and higher density. The understanding of magnetization reversal processes in such patterned media is important. In this work, the range of single domain island size based on Co/Pd bit-patterned media was determined. Demagnetization effect, dipolar interactions and switching field distribution (SFD) for bit-patterned media were quantitatively studied by the simulation based on Landau-Lifshitz-Gilbert equation. The total hysteresis loops and SFD were comparable with the experiment ones. The SFD increased from 2σ=1.2 kOe (as the calculated intrinsic SFD) to the experimental value of 1.9 kOe due to dipolar interactions which is in a good agreement with the experimental results (2.0 kOe). Optimized patterned structure with a minimized SFD and maximized data storage densities was found to have an island size of 10 nm and islands separation of 20 nm. The calculated ratio of SFD/H_c (H_c: the coercivity) is 9.2%, which is below the threshold of 10% for 1 Tb/in² pattern media.     

Shape and size transformation of gold nanorods (GNRs) via oxidation process: A reverse growth mechanism

The anisotropic shape transformation of gold nanorods (GNRs) with H₂O₂ was observed in the presence of “cethyl trimethylammonium bromide” (CTAB). The adequate oxidative dissolution of GNR is provided by the following autocatalytic scheme with H₂O₂: Au⁰ → Au⁺, Au⁰ + Auⁿ⁺ → 2Au³⁺, n = 1 and 3. The shape transformation of the GNRs was investigated by UV-vis spectroscopy and transmission electron microscopy (TEM). As-synthesised GNRs exhibit transverse plasmon band (TPB) at 523 nm and longitudinal plasmon band (LPB) at 731 nm. Upon H₂O₂ oxidation, the LPB showed a systematic hypsochromic (blue) shift, while TPB stays at ca. 523 nm. In addition, a new emerging peak observed at ca. 390 nm due to Au(III)-CTAB complex formation during the oxidation. TEM analysis of as-synthesised GNRs with H₂O₂ confirmed the shape transformation to spherical particles with 10 nm size in 2 h, whereas centrifuged nanorod solution showed no changes in the aspect ratio under the same condition. Au³⁺ ions produced from oxidation, complex with excess free CTAB and approach the nanorods preferentially at the end, leading to spatially directed oxidation. This work provides some information to the crystal stability and the growth mechanism of GNRs, as both growth and shortening reactions occur preferentially at the edge of single-crystalline GNRs, all directed by Br⁻ ions.     

High-precision frequency measurements of the ν1 + ν3 combination band of C2H2 in the 1.5 μm region

A pair of 1.5 μm semiconductor laser frequency standards have been developed for optical telecommunications use, stabilised to transitions of ¹²C₂H₂ and ¹³C₂H₂, using cavity-enhanced Doppler-free saturation absorption spectroscopy. The absolute frequencies of 41 lines of the ν₁ + ν₃ band of ¹²C₂H₂, covering the spectral region 1520-1545 nm, have been measured by use of a passive optical frequency comb generator, referenced to ¹³C₂H₂ transitions of known frequency. The mean experimental uncertainties (coverage factor k = 1) of the frequency values are 3.0 kHz (type A) and 10 kHz (type B). Improved values of the band origin ν₀, rotational constants B′ and B″, and centrifugal distortion coefficients D′, D″, H′, and H″ are presented.