隔水管弯曲对钻柱振动影响的计算与分析

海洋油气资源钻探中隔水管的弯曲对钻柱振动以及钻进特性有特别的影响。为得到隔水管弯曲对钻柱振动的影响规律,对南海已钻深水井使用非线性有限元软件建立全井钻井数值计算模型,研究获得了不同垂深时隔水管弯曲对钻柱振动特性的影响规律。研究表明:隔水管弯曲会加剧钻柱的振动,钻柱振动加剧会导致钻井能耗上升、钻头切削能力下降并且会加快钻柱疲劳;当隔水管的弯曲达到某临界值,钻柱与隔水管间的接触力会陡增;井口的钩载越大,隔水管弯曲带来的井口钩载波动量越大;井越深,隔水管弯曲对全井钻柱最大弯矩和钻头切削能力的影响越小。     

试论静力学在流体力学课程中的地位

从材料的本构方程和基本运动方程出发, 比较了静力学在弹性力学和流体力学中的 地位. 与弹性静力学在弹性力学中占有重要地位不同, 流体静力学在流体力学中仅处 于次要地位, 它不是流体动力学的基础, 而只是一个特例. 确立这种观点有助于提高对流体 力学学科特点的认识, 提高流体力学教学质量.     

On the derivation for the gradients of the principal invariants

In this notes, it is shown that the method carried out by Truesdell and Noll [1] for the gradients of the principal invariants is available to be used for arbitrary second-order A. Finally, some trace identities for the derivatives of invariants are given.     

On the existence of the derivative of the volume average

A general theorem on the derivative of the volume average is formulated and proved. Conditions for the existence of the derivative are presented and discussed. This is done in order to give a better base to the theory of spatial averaging.Latin Letters E ₃ three-dimensional vector space over the field of real numbers - K, K(x) averaging domain - G, G _w, G_s open sets in E ₃; components of the two-phase system - C ¹(G) the set of functions 1-times continuously differentiable in G - W1/2(G) Sobolev space - V volume of the domain K - f function defined in G, G _w - K _infi ^sup* (x), K _infi ^sup– (x) special parts of K(x) Greek Letters boundary of G, G _w, G_s; w-s interface - _ij Kronecker delta - v unit outward normal of G, G _w - _j j-dimensional Lebesgue measure Other M closure of a set M in the metric space E ₃ - f phase average of f for the w-phase - (u, v) scalar product of u, v in E ₃ - one-sided derivatives     

进气道入口形状对冲压发动机性能影响数值研究

进气道是冲压发动机设计中非常重要的环节,其入口设计会直接影响冲压发动机的总压恢复系数σ和流量系数φ等重要性能。本文采用二阶迎风隐式TVD格式,内外流分区耦合求解可压缩N-S方程,数值模拟了掺混段出口压力与来流压力比为P/P∞=4.2超临界状态下,二元方形截面“X”型布局进气道、弹体和掺混段一体化通气模型复杂流场。计算比较了两种不同二元进气道入口形状流场和冲压发动机总压恢复系数σ、流量系数φ的结果,对其产生的原因进行了分析。     

表面织构对刀具切削性能及前刀面摩擦特性的影响

为了研究刀具表面织构对切削性能的影响,通过控制前刀面上微凹坑的直径、深度和面积占有率等参数制备了两组表面高度算术平均值Sa相同的织构刀具.使用Talysurf CCI Lite非接触式三维光学轮廓仪对织构表面进行测量,采用ISO25178参数对测量表面进行表征;通过SL200KS接触角测量仪测量织构刀具前刀面湿润性的变化;随后在CA6140车床上进行45钢切削试验,研究不同织构对切削力、前刀面摩擦特性、工件表面粗糙度和切屑形变的影响.结果表明:合理的表面织构能够改善刀具的切削性能;切削液在前刀面铺展较快的织构刀具获得了较好的切削性能;凹坑直径、深度和面积占有率的协同作用对改善刀具切削性能至关重要,为了协调这三个织构参数,进一步研究三维表征参数Sku、Ssk、Sv、Vvv、Vvc、Sdv、Sda、Spd与刀具切削性能的关联性,为刀具表面设计提供了基础.     

Analysis of the Influence of the Thickness and the Hole Radius on the Calibration Coefficients in the Hole-Drilling Method for the Determination of Non-uniform Residual Stresses

Experimental Mechanics - The Hole-Drilling method is a semi-destructive technique useful for obtaining residual stress distributions by drilling and measuring relieved strains. The standard for...