片状MoS2/MoS1.5Se0.5纳米复合材料的制备及其摩擦学性能研究

将钼粉与升华硫和硒粉的混合粉末按一定化学计量比混合,通过固相反应法成功制备出了均匀的片状纳米颗粒。分别使用X射线粉末衍射仪(XRD)、扫描电子显微镜(SEM)以及透射电子显微镜(TEM)对该纳米粉体进行结构表征和分析,发现该粉体为MoS2/MoS1.5Se0.5混合晶相,晶粒尺寸在300~600 nm,厚度约为5 nm的片状结构。将该MoS2/MoS1.5Se0.5纳米片作为润滑油添加剂添加到基础油中,使用UMT-2型摩擦磨损试验机对其摩擦学性能进行测试,并对摩擦机理进行了解释,结果表明MoS2/MoS1.5Se0.5纳米片作为润滑油添加剂具有良好的减摩抗磨性能。     

基于核酸外切酶Ⅲ诱导的双重信号放大与MoS2纳米片荧光碎灭性质的核酸检测方法

将核酸外切酶Ⅲ诱导的双重信号放大技术与MoS2纳米片的荧光猝灭性质结合,构建了一种高灵敏高选择性的DNA检测方法.首先设计两条末端修饰荧光基团的探针核酸(HP1和HP2).由于两条探针核酸具有3'粘性末端,使其不会被核酸外切酶Ⅲ降解,因而被吸附于MoS2纳米片而猝灭其荧光.当目标DNA存在时,会促使核酸外切酶Ⅲ启动双重信号放大反应,并将探针核酸降解成大量的不能吸附于MoS2纳米片表面的荧光碎片.在优化条件下,目标DNA浓度在0.5~6.0 pmol/L范围内与荧光信号变化呈良好的线性关系,检出限为0.28 pmol/L.与单重信号放大技术相比,本方法极大改善了分析灵敏度和检出限,且具有良好的单碱基错配区分能力.     

lixmos2的制备及其摩擦学特性

采用正丁基锂直接插入法制备出不同插层程度的LixMoS2,并考察了插层反应温度、反应物摩尔量比和反应时间等因素对插层效果的影响. 结果发现,控制反应物n-C4H9Li与MoS2的摩尔比为5～9、插层反应温度为30 ℃左右,在机械搅拌下反应36～48 h制得LixMoS2,在水中剥层后能制得不同插层程度的MoS2悬浮液. 采用XRD对该悬浮液中的MoS2颗粒进行了表征. 结果发现,在LixMoS2中的x值越大制得的MoS2衍射峰宽化越严重,晶粒越小,晶形越差. 在四球摩擦磨损试验机考察了不同插层程度的MoS2悬浮液的摩擦学性能. 结果表明,x值在0.618～1.39范围的摩擦系数和磨斑直径均随着x值的变化先减小后增加,在x为0.75左右时,抗磨减摩性能达到最佳.     

碳纳米管@SiO2@Ag纳米复合材料的制备及其表面增强拉曼效应

本文以SiO₂为中间层,在多壁碳纳米管(MWCNTs)表面负载Ag纳米粒子,制备出CNTs@SiO₂@Ag纳米复合材料,并采用TEM、XRD、UV-Vis、XPS等对纳米复合材料的结构、形貌和成分进行了表征,同时对该纳米复合材料的表面增强拉曼散射(Surface-enhancedRamanscattering,SERS)效应进行了研究。结果显示,Ag纳米颗粒有效提高了CNTs的SERS活性,纳米复合材料的拉曼峰强度是单纯CNTs拉曼峰强的近5倍。进一步研究了吸附罗丹明6G生物染料分子的SERS光谱,结果表明R6G分子的拉曼信号的质量与强度得到显著提高。因此,所制备的CNTs@SiO₂@Ag纳米复合材料有望作为SERS的活性基底,应用于生物无损检测领域。     

表面活性剂辅助水热制备形貌结构可控的MoS2及其蒽加氢性能

随着原油资源重质化和劣质化的加剧以及对清洁燃料油品需求的不断增加,将重质油加工成清洁燃料成为现代炼厂面临的挑战.悬浮床加氢是重质油转化为清洁液体燃料的先进技术,其核心难题是高效加氢催化剂的开发.MoS2在石油化工领域油品加氢提质研究中表现出非常好的催化加氢性能.MoS2晶体结构中有两种面:沿S-Mo-S层间的剥离面,又称基面,化学性质稳定;沿Mo-S的断裂面,又称棱面,具有大量的不饱和键,化学性质不稳定,可做催化活性中心.由于MoS2结构和形貌对其物理化学性能有重要影响,所以通过合理设计和调控MoS2的结构和形貌可增加暴露的催化活性位,进而改善其催化性能.本文以七钼酸铵和硫代乙酰胺为原料,水合肼做还原剂,采用不同表面活性剂(包括PEG,PVP,P123,SDS,AOT和CTAB)辅助的水热合成法制备了结构及形貌可控的MoS2,并提出不同表面活性剂条件下MoS2催化剂的生长机理,进一步研究了重油模型化合物稠环芳烃蒽的催化加氢性能.结果表明,在不同表面活性剂辅助的条件下分别制得了由MoS2纳米片组装而成的球形、块状和花状的MoS2产物;通过改变表面活性剂种类可调变MoS2纳米片的长度、堆积层数、层间距以及最终产物的形貌.在PEG或PVP辅助下得到了球形MoS2产物,其中MoS2纳米片长<15 nm,堆积层数<6.在PEG辅助下制备的球形MoS2粒径约为250 nm,尺寸均一且分散性好.在PVP辅助下MoS2粒径在200–450 nm,粒径分布范围宽且有明显团聚.在P123或SDS辅助下得到了团聚较明显的块状微米级MoS2产物.在P123辅助下得到的MoS2纳米片长<15 nm,层数<6.在SDS辅助下制备的MoS2纳米片长>20 nm,堆积层数>8.在AOT或CTAB辅助下得到团聚比较严重的花状微米级MoS2产物,其中MoS2纳米片长>20 nm,堆积层数>8.另外,水热反应过程中,高温高压的环境促进了反应体系中游离的NH4+插入到MoS2层状结构中,导致MoS2纳米片层间距增大.基于此,本文提出了不同表面活性剂辅助的水热过程中不同结构和形貌MoS2产物的形成机理.对不同结构和形貌的MoS2样品进行了悬浮床蒽加氢催化性能评价.结果表明,PEG辅助制备的MoS2催化剂具有最高催化加氢活性.该MoS2催化剂中纳米片层短,堆积层数少,暴露了更多的加氢活性位.单分散的球形MoS2颗粒粒径小,分散性好,有利于加氢活性位的充分暴露,进而表现出较好的催化性能.本文所采用的表面活性剂辅助的水热法为可控合成不同结构和形貌的过渡金属硫化物提供了有效指导和借鉴.     

稀土硫化物—聚苯乙烯纳米复合材料的制备与表征

采用原位合成法制备了稀土硫化物—聚苯乙烯纳米复合材料 .通过荧光光谱、磁性、光电子能谱、透射电镜等手段对材料进行表征 .荧光光谱测试可见Eu3+ 的特征发射峰 ;磁性测试表明与H2 S反应后复合材料的饱和磁化强度降低 ;TEM测试表明反应后复合材料的微观结构发生了变化 .分析了产生上述变化的原因     

漆酚钛聚合物/蒙脱土纳米复合材料的制备、结构与性能

用溶液插层聚合方法制备漆酚钛聚合物/蒙脱土纳米复合材料(PUTi/OMMT),并用XRD、TEM和TG等对其结构、性能进行测试与表征.XRD结果表明,通过溶液插层,PUTi分子链进入了OMMT片层间,从而使片层间距增大.TEM观察表明OMMT片层在PUTi聚合物中基本达到纳米级分散.与PUTi相比,PUTi/OMMT纳米复合材料具有更好的耐热性能和抗紫外光性能.     

碳纳米管@SiO_2@Ag纳米复合材料的制备及其表面增强拉曼效应

本文以SiO2为中间层,在多壁碳纳米管(MWCNTs)表面负载Ag纳米粒子,制备出CNTs@SiO2@Ag纳米复合材料,并采用TEM、XRD、UV-Vis、XPS等对纳米复合材料的结构、形貌和成分进行了表征,同时对该纳米复合材料的表面增强拉曼散射(Surface-enhanced Raman scattering,SERS)效应进行了研究。结果显示,Ag纳米颗粒有效提高了CNTs的SERS活性,纳米复合材料的拉曼峰强度是单纯CNTs拉曼峰强的近5倍。进一步研究了吸附罗丹明6G生物染料分子的SERS光谱,结果表明R6G分子的拉曼信号的质量与强度得到显著提高。因此,所制备的CNTs@SiO2@Ag纳米复合材料有望作为SERS的活性基底,应用于生物无损检测领域。     

基于介孔分子筛MCM-41“有机-无机”互穿结构纳米复合材料体系研究

采用硅烷偶联剂KH550对介孔分子筛MCM-41内、外表面进行改性,并利用氮气吸附-脱附,傅里叶红外光谱以及小角X衍射等进行表征,其结果显示KH550分子被引入MCM-41纳米孔道中,且—NH_2基团成功嫁接到MCM-41纳米颗粒表面.凝胶液相色谱实验结果证实本文中采用的双酚A型环氧树脂为低分子量环氧.随后,采用原位聚合的方法制备不同MCM-41含量环氧树脂纳米复合材料.最后,利用正电子湮没寿命谱测量复合材料自由体积孔洞;利用透射电镜,动态热机械分析和交流击穿对复合材料宏观性能进行研究.复合材料超薄切片TEM观察结果显示,在低MCM-41添加含量时,MCM-41颗粒可在复合材料中良好分散.同时,环氧分子在外施作用力和硅烷偶联剂功能作用下引入纳米孔道,形成"有机-无机"互穿结构复合材料体系,增强MCM-41和环氧树脂间相互作用力,在低MCM-41添加含量下提高复合材料玻璃化温度(15.1%↑)和击穿电压(22.6%↑).     

退火温度对TiO_2/CdSe纳米片异质结薄膜光电性能的影响

采用水热法在FTO上制备(001)高活性晶面主导的TiO_2纳米片薄膜,利用循环伏安法在TiO_2纳米片薄膜上沉积CdSe颗粒,制备了TiO_2/CdSe纳米片异质结薄膜。分别在150、250、350、450℃,氩气保护气氛中对样品进行退火。利用X射线衍射仪(XRD)、场发射扫描电镜(FESEM)、X射线光电子能谱分析仪(XPS)、紫外-可见(UV-Vis)分光光度计以及电化学工作站对不同温度退火后的TiO_2/CdSe纳米片异质结薄膜的微观形貌、晶体结构、光电化学性能进行表征和测试。结果表明:六方相CdSe纳米颗粒均匀包覆在TiO_2纳米片表面,直径30 nm左右;随着退火温度的升高CdSe纳米颗粒长大,形成光滑的CdSe薄膜,且晶化程度提高;TiO_2纳米片表面的Se元素与Cd元素发生氧化;TiO_2/CdSe纳米片异质结薄膜对可见光的吸收光谱发生红移,禁带宽度逐渐减小。光电化学性能测试表明随着退火温度的升高,TiO_2/CdSe纳米片异质结薄膜的光电流密度显著提高,开路电压减小,但由于SeO_2和CdO的出现,导致填充因子减小,影响光电转换效率的提高。在本实验条件下,TiO_2/CdSe纳米片异质结薄膜的最佳退火温度为150℃,填充因子为0.77,光电转换效率达到3.12%。     

多环芳二酐型聚酯亚胺膜的透气性能

多环芳二酐型聚酯亚胺膜的透气性能李悦生，丁孟贤，徐纪平（浙江大学高分子科学与工程研究所，杭州，３１００２７）（中国科学院长春应用化学研究所）关键词聚醚酰亚胺，聚酯酰亚胺，膜，透气性通常的聚酰亚胺加工性能较差，在芳环二酐的苯环间引入醚键等柔性基团后，其...     

微量元素与疾病诊断治疗的研究现状及展望

对国内外微量元素与疾病的关系及其诊断治疗的研究现状及研究动向进行了综述，包括：微量元素与地方病、癌肿、心血管病、糖尿病、眼病、神经系统病等。参考文献72篇。     

Determination and study on residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil

A QuEChERS (quick, easy, cheap, effective, rugged, and safe) method for the determination of benazolin-ethyl and quizalofop-p-ethyl in rape and soil by high-performance liquid chromatography-tandem mass spectrometry has been developed in this study. The residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil were determined with the developed method. The half-lives of benazolin-ethyl in rape straw and soil were 3.7–5.1 days and 14.3–26.3 days, respectively. The half-lives of quizalofop-p-ethyl in rape straw and soil were 5.0-6.1 days and 0.3–9.7 days, respectively. The residue of benazolin-ethyl and quizalofop-p-ethyl in rapeseed and soil were below the detection limit (i.e., 0.5?mg?kg^?1, the maximum residue level of European Union for quizalofop-p-ethyl).     

Synthesis and Optical and Redox Properties of Symmetric and Asymmetric BODIPYs

Herein, we present the synthetic route and the photophysical, electrochemical as well as laser properties of novel red‐emitting boron‐dipyrromethenes (BODIPYs) bearing arylethyne moieties. Such functionality is added along the main axis of the chromophore leading to single‐ and double‐substituted derivatives. The relationship between the dye structure and the lasing properties is studied in detail with the help of the photophysical and electrochemical properties as well as quantum mechanical simulations. The asymmetric substitution of the parent dye induces inhomogeneities in the charge distribution, which leads to an overall loss of the fluorescence capacity, mainly in polar media. Such non‐radiative deactivation processes can be softened by decreasing the electron‐donor ability of the substituent or even avoided by symmetrical substitution. Thus, grafting of the arylethyne moieties at the longitudinal axis of the indacene core results in an effective strategy to develop red‐edge BODIPYs with highly efficient and photostable laser emission.     

Ti-V基储氢合金及其氢化物的物相结构与组分优化设计

Ti-V基储氢合金在室温、常压下即可表现出良好的储氢特性,且质量储氢容量明显高于传统AB₅型储氢合金,从而在氢气的精制和回收、运输和储存及热泵等方面有较早的应用。 此外,在混合气体分离、核反应堆中处理氢的同位素、镍氢电池及燃料电池负极材料等方面也得到了广泛的研究与关注。 基于目前Ti-V基储氢合金的研究现状,概述了该类合金的优势、限制性因素(包括成因)及改性手段。 此外,为了进一步理解Ti-V基合金储氢机理、构建合金组分与储氢特性之间的对应关系,本工作重点围绕Ti-V基储氢合金及其氢化物的结构、组分优化设计展开综述,并对其未来研究方向做出展望。     

钒与糖代谢及糖尿病

微量元素钒作为生物体内必需元素，经证实有很重要的生理学功能，与机体糖代谢有十分密切的关系，且能降低糖尿病动物模型的高血糖，极有可能被开发为治疗糖尿病的药物。     

Conformations and steric and stacking interactions of trisubstituted ureas and thioureas with alkyl and phenyl groups

The monomeric ν(N—H) vibrations of various trisubstituted ureas of the R₂UPh type and -thioureas of the R₂TUPh type have been studied. The trans—out isomerism in the former and the trans—out—cis isomerism in the latter are discussed from the point of view of steric effect. The monomeric ν(N—H) vibrations of RPhUPh and RPhTUPh are also examined. The single band appearing in the spectrum of both ureas is characteristic of the cis form; this suggests the existence of phenyl—phenyl interaction (the stacking interaction proposed by Galabov et al. [10]). Behavior of ν(N—H) vibrations at several concentrations is shown to be clearly different in the three forms (trans, out and cis). The presence of the cis form is confirmed by solvent effect experiments.     

Synthesis of Tyrosol and Hydroxytyrosol Glycofuranosides and Their Biochemical and Biological Activities in Cell-Free and Cellular Assays

Tyrosol (T) and hydroxytyrosol (HOT) and their glycosides are promising candidates for applications in functional food products or in complementary therapy. A series of phenylethanoid glycofuranosides (PEGFs) were synthesized to compare some of their biochemical and biological activities with T and HOT. The optimization of glycosylation promoted by environmentally benign basic zinc carbonate was performed to prepare HOT α-L-arabino-, β-D-apio-, and β-D-ribofuranosides. T and HOT β-D-fructofuranosides, prepared by enzymatic transfructosylation of T and HOT, were also included in the comparative study. The antioxidant capacity and DNA-protective potential of T, HOT, and PEGFs on plasmid DNA were determined using cell-free assays. The DNA-damaging potential of the studied compounds for human hepatoma HepG2 cells and their DNA-protective potential on HepG2 cells against hydrogen peroxide were evaluated using the comet assay. Experiments revealed a spectrum of different activities of the studied compounds. HOT and HOT β-D-fructofuranoside appear to be the best-performing scavengers and protectants of plasmid DNA and HepG2 cells. T and T β-D-fructofuranoside display almost zero or low scavenging/antioxidant activity and protective effects on plasmid DNA or HepG2 cells. The results imply that especially HOT β-D-fructofuranoside and β-D-apiofuranoside could be considered as prospective molecules for the subsequent design of supplements with potential in food and health protection.     

Ferrocene and ferrocenium modified clays and their styrene and EVA composites

In this work, ferrocene- and ferrocenium-containing salts were employed to modify montmorillonite. X-ray measurements show an increase in the interlayer spacing upon clay modification, which means that the larger and more organophilic cations were inserted into the gallery space of montmorillonite. Attempts to prepare nanocomposites of polystyrene and ethylene vinyl acetate copolymers lead to immiscible systems; the morphology of these systems was elucidated with TEM, XRD and cone calorimetry. The thermal stability of the composites is greater than that of the virgin polymer.