Solvent effects on infrared spectra of methyl 4-hydroxybenzoate in pure organic solvents and in ethanol/CCl4 binary solvents

Infrared spectroscopy studies of methyl 4-hydroxybenzoate (MHB) in 17 different organic solvents and in ethanol/CCl4 binary solvent were undertaken to investigate the solvent-solute interactions. The frequencies of carbonyl stretching vibration nu(C=O) of MHB in single solvents were correlated with the solvent acceptor number (AN) and the linear solvation energy relationships (LSER). The assignments of the two bands of nu(C=O) of MHB in alcohols and the single one of that in non-alcoholic solvents were discussed. The shifts of nu(C=O) of MHB in ethanol/CCl4 binary solvents showed that several kinds of solute-solvent hydrogen bonding interactions coexisted in the mixture solvents, with a change in the mole fraction of ethanol in the binary solvents.     

Solvent effects on infrared spectra of 2-acetylthiophene in organic solvents

Infrared spectroscopy studies of 2-acetylthiophene (ACTH) in 18 different organic solvents, both polar and non-polar, were undertaken to investigate the solvent-solute interactions. The frequencies of carbonyl stretching vibration upsilon(C=O) of ACTH were correlated with the properties such as the solvent acceptor number (AN) and the linear solvation energy relationships (LSER). The solvent-induced stretching vibration frequency shifts showed a better correlation with the LSER than the AN. A six-membered ring-like hydrogen bonding structure was presented and the solvent effects of ACTH in alcohol solvents were investigated in detail.     

Combined QSAR/QSPR,Molecular Docking,and Molecular Dynamics Study of Environmentally Friendly PBDEs with Improved Insulating Properties

To improve the insulating properties of polybrominated diphenyl ethers(PBDEs), we studied the molecular structures and energy gap(Eg) values of 209 PBDEs using a three-dimensional quantitative structure-activity relationship(3D-QSAR) model, molecular docking, and molecular dynamics. We also analyzed the interaction mechanisms of PBDEs using a 2D-QSAR model, molecular substitution characteristics, and molecular docking. The 3D-QSAR model showed that the 2-, 4-, 5-, and 6-positions significantly influenced the PBDE insulating properties. Using BDE-34 as a template molecule, we designed six derivatives with 0.47%-28.44% higher insulation tlian BDE-34. Compared with BDE-34, the stability and flame retardancy of the above six derivatives were not adversely affected. These derivatives, except for 2,6-cyanomethyl-BDE, 2-cyanomethyl-BDE, and 2-aniinomethyl-BDE, were more toxic and biodegradable than BDE-34, but showed weaker bioaccumulation and migration abilities than BDE-34. Mechanism analysis showed that the highest occupied orbital energy, the most negative charge, and the dipole moment were the main quantitative parameters that aflected the PBDE insulating properties. PBDE insulation gradually decreased as the number of Br atoms increased. The level of similarity between the substitution patterns on the two benzene rings was significantly correlated with PBDE insulation, with hydrophobic groups having a more significant efiect on PBDE insulation.     

Elution of 17α 25-Norhopanes and Triaromatic Steroids from Weathered Soils by Mixed Triton X-100/Na2SiO3 Surfactant Solution

Sodium silicate(Na₂SiO₃) was used to improve the elution of super heavy oil from weathered soil on an ultrasound-enhanced elution system by the solution containing 0―6000 mg/L surfactant Triton X-100. The removal extent of three markers[C_26―34 17α 25-norhopanes, C_26―28 triaromatic steroids(TAS), and C_27―29 methyl triaromatic steroids(MTAS)] was monitored. The average elution percentages of C_26―34 norhopanes, C_26―28 TAS, and C_27―29 MTAS by Triton X-100/Na₂SiO₃ solutions were increased by 11%―13%, 9%―11% and 8%―13% with increasing Triton X-100 concentrations from 150 mg/L to 6000 mg/L. All the concentrations of Triton X-100 improved the elution of TAS homologs containing fewer carbon atoms, whereas high concentrations improved the elution of larger 17α 25-norhopane and MTAS species. Addition of Na₂SiO₃ produced a noticeable increase in elution, particularly for lower-weight species. Scanning electron microscope(SEM) images and energy spectroscopy data reveal that surfactant solution of 6000 mg/L Triton X-100 and 4000 mg/L Na₂SiO₃ produced the greatest improvement in the elution of super heavy oil aggregates encapsulating the soil surface and the emulsification of particle dispersions. That is to say mixed solutions of Triton X-100 and Na₂SiO₃ in combination with ultrasound are a potential means of removing super heavy oil from weathered soils.     

Solvatochromism and Preferential Solvation of 4-Pentacyanoferrate 4′-Aryl Substituted Bipyridinium Complexes in Binary Mixtures of Hydroxylic and Non-hydroxylic Solvents

The intense solvatochromic behavior of several pentacyanoferrate complexes with aryl substituted 4,4′-bipyridines acting as ligands, was investigated in six hydroxylic and non hydroxylic solvents using UV-Visible spectroscopy. The metal-to-ligand-charge-transfer bands of the visible spectra of these compounds proved to be markedly affected by solvent polarity. In order to quantify the extent of the observed solvatochromism and reveal the dominant interactions which take place in the cybotactic region, resulting in solvatochromism, the Kamlet-Taft equation was used. This is a multiparametric linear-solvation-energy-relationship (LSER) widely used for the study of solvent effects on various physicochemical properties. Through this analysis it was proved that both specific and non specific interactions contribute to the observed solvatochromism. Furthermore, the preferential solvation of the complex salts was studied in binary solvent mixtures. Solvatochromism was used as the key approach to rationalize solvent-solute and solvent-solvent interactions in the binary solvent mixtures studied.     

THE Py SCALE OF SOLVENT POLARITIES. SOLVENT EFFECTS ON THE VIBRONIC FINE STRUCTURE OF PYRENE FLUORESCENCE and EMPIRICAL CORRELATIONS WITH ET and Y VALUES

Abstract— Pyrene fluorescence spectra have been run in 62 solvents of widely differing solvent polarity. As has been noted previously, the intensity ratio of the first (the 0–0 band) and third bands in vibronic fine structure of these spectra are very sensitive to solvent polarity. These I ₁/ I ₃ values, however, are not sensitive to hydrogen bonding aspects of solvent-solute interactions. Correlations are reported with Winstein's Y values and with Dimrotb's E _T values. On this basis the I ₁/ I ₃ values for pyrene fluorescence are suggested as the basis for a new empirical scale of solvent polarity, called the Py scale, which offers certain conveniences over other scales of solvent polarity.     

Determination of polybrominated diphenyl ethers in freshwater fishes from a river polluted by e-wastes

Analytical method using mass spectrometric techniques was applied for the determination of polybrominated diphenyl ethers (PBDEs) in freshwater fishes. Fish samples collected from Nanyang River contaminated by the recycling electron-wastes (e-wastes) materials were prepared by using Soxhlet extraction and multiple-step column chromatographic clean-up. PBDEs were determined by gas chromatography (GC) coupled with ion trap mass spectrometry (for mono- to hepta-BDEs) and quadrupole mass spectrometry (for BDE-209). The method performance was evaluated with the recovery of ¹³C-labeled internal standards and with the analysis of certified reference biota. The obtained recoveries ranged from 75 to 125% with a relative standard deviation of lower than 10% for 16 PBDE congeners. The total PBDE (ΣPBDE) concentrations in fishes showed the following trend: grass carp < mud carp < crucian carp < silver carp < carp. ΣPBDE concentrations in the abdomen, back and tail muscles of carp ranged from 766, 458 and 530 ng/g w.w., and 53, 52, 45 ng/g w.w. in grass carp, respectively. The ΣPBDE concentrations in abdomen muscles were no significantly higher than in back and tail muscles in carp, crucian carp, grass carp and mud carp. PBDE congener concentrations in muscles correlated well with their lipid content. BDE-47 and BDE-28 were the most abundant congeners followed by BDE-17, BDE-15, BDE-66, BDE-154 and BDE-153 in fishes collected from Guiyu.     

Effects of Electron Donor and Different Solvents on Polarizability and Second Hyperpolarizability of Diradical Complex Involving X(X=B,Al, Ga)

The polarizability(a)and second hyperpolarizability(γ)were systemically investigated for singlet diradical complex involving X(X=B,Al,Ga)atom.The results show that both the a and γ can be effectively t...     

Solubility prediction of anthracene in mixed solvents using a minimum number of experimental data

Numerical methods to predict the solubility of anthracene in mixed solvents have been proposed. A minimum number of 3 solubility data points in sub-binary solvents has been employed to calculate the solvent-solute interaction terms of a well established colsolvency model, i.e. the combined nearly ideal binary solvent/Redlich-Kister model. The calculated interaction terms were used to predict the solubility in binary and ternary solvent systems. The predicted solubilities have been compared with experimental solubility data and the absolute percentage mean deviation (APMD) has been computed as a criterion of prediction capability. The overall APMD for 25 anthracene data sets in binary solvents is 0.40%. In order to provide a predictive method, which is based fully on theoretical calculations, the quantitative relationships between sub-binary interaction terms and physicochemical properties of the solvents have been presented. The overall APMD value for 41 binary data sets is 9.19%. The estimated binary interaction terms using a minimum number of data points and the quantitative relationships have then been used to predict anthracene solubility data in 30 ternary solvent systems. The produced APMD values are 3.72 and 15.79%, respectively. To provide an accurate correlation for solubility in ternary solvent systems, an extension to the combined nearly ideal multicomponenet solvent/Redlich-Kister (CNIMS/R-K) model was proposed and the corresponding overall AMPD is 0.38%.     

Analysis of polybrominated diphenyl ethers (PBDEs) by liquid chromatography with negative-ion atmospheric pressure photoionization tandem mass spectrometry (LC/NI-APPI/MS/MS): application to house dust

Eight polybrominated diphenyl ether (PBDE) congeners of primary interest to the US EPA were separated using reverse-phase liquid chromatography on an octadecylsilane column. BDE-28, BDE-47, BDE-99, BDE-100, BDE-153, BDE-154, BDE-183, and BDE-209 were baseline-resolved under isocratic conditions in 92:8 methanol/water (v/v). Negative-ion atmospheric pressure photoionization (NI-APPI) with a toluene dopant produced precursor ions corresponding to [M–Br+O]^– for the eight congeners studied. Each congener was quantified by tandem mass spectrometry through a unique multiple reaction monitoring (MRM) transition. On-column limits of detection were between 2.4 and 27.8 pg for the eight congeners studied, with an intra-day method precision of 9%. The LC/NI-APPI/MS/MS method was validated for the analysis of the eight PBDE congeners in NIST SRM 2585 (Organics in House Dust). Pressurized liquid extraction (PLE) with subsequent LC/NI-APPI/MS/MS analysis afforded quantitative recovery for all eight PBDE congeners with recoveries ranging from 92.7 to 113%. The liquid-phase separation of the LC/NI-APPI/MS/MS method is not prone to the thermal degradation issues that plague splitless GC based analyses of highly brominated PBDEs such as BDE-209.     

Electronic spectral parameters of the azo indicators: methyl red, methyl orange, PAN, and fast black K-salt

The electronic absorption spectra of some azo indicators (methyl red, methyl orange, PAN, and fast black K-salt) were taken in different solvents with different physical properties in order to study the solvent-solute interaction. The parameters used depend on the solvent dielectric constant and refractive index. The data are analyzed based on multiple regression technique.     

Determination of 41 polybrominated diphenyl ethers in soil using a pressurised solvent extraction and GC-NCI-MS method

A rapid and reliable analytical method based on pressurised solvent extraction (PSE) and GC-NCI-MS was developed for the determination of 41 different PBDEs in soil. All PBDEs, including mono- to hepta-BDEs (sum of 39 congeners), one nona-BDE and deca-BDE, were efficiently extracted from soil samples using the extraction technology of PSE. The extract was then cleaned up on a florisil column. Satisfactory separation of 41 PBDE congeners was obtained on a 15-m DB-5MS capillary column, saving the use of another 30-m column specific for the separation of mono- to hepta-BDEs. PBDEs were identified and quantified by GC-MS in negative chemical ionisation (NCI) mode, and further confirmed in semi electron impact (SEI) mode when the ion source was also NCI. The method detection limits ranged from 0.01 to 0.03?ng?g^?1?dw for mono- to hepta-BDEs, 1.43?ng?g^?1?dw for the nona-BDE and 0.20?ng?g^?1?dw for deca-BDE. The applicability of the method was tested in soil samples collected from an e-waste recycling site at Guiyu. Twenty-one PBDEs (mono- to deca-) were detected, and eighteen congeners were quantified. The concentration range of PBDEs was 0.78–436?ng?g^?1?dw. BDE-47, BDE-99, BDE-153, BDE-183, BDE-206 and BDE-209 were the dominant congeners, and BDE-209 accounted for 62% of the total PBDEs. The congener profiles of PBDEs in soil samples were similar to those in three commercial PBDE products (Penta-, Octa- and Deca-BDE), and Deca-BDE product was the most important contributor.     

Fast analysis of decabrominated diphenyl ether using low-pressure gas chromatography-electron-capture negative ionization mass spectrometry

This paper reports the applicability of low-pressure gas chromatography-mass spectrometry operated in electron-capture negative ionization mode (LP-GC-ECNI-MS) for the analysis of decabrominated diphenyl ether (BDE-209). Particular attention was paid to find optimal injector and oven conditions for minimal thermal degradation of BDE-209. The analytical characteristics were compared for LP-GC columns (10 m x 0.53 mm) with different film thicknesses (d(f) 0.15 microm versus 0.25microm) and for a conventional GC column (15 m x 0.25 mm, 0.10 microm d(f)). Short residence times (6.5 and 9.8 min) of BDE-209 were found for the LP-GC systems with 0.15 and 0.25microm d(f), respectively, resulting in a low elution temperature and minimal degradation. Additionally, baseline separation of 22 polybrominated diphenyl ether (PBDE) congeners (major components of PBDE technical mixtures) was possible in less than 12 min using the LP-GC-ECNI-MS system with 0.15microm d(f). The optimized method was applied for the determination of PBDEs in Belgian indoor dust samples. The obtained concentrations of BDE-209 (range 8-292 ng/g dry weight) were in the same range or lower than concentrations in dust from other European countries.     

Supercritical fluid extraction of polybrominated diphenyl ethers (PBDEs) from house dust with supercritical 1,1,1,2-tetrafluoroethane (R134a)

The extraction of polybrominated diphenyl ethers (PBDEs) from SRM 2585 (Organic Contaminants in House Dust) was investigated using supercritical fluid R134a as an extraction solvent. Three methods of dust extraction were studied: (1) extraction of dry dust, (2) extraction of dry dust dispersed on Ottawa sand and (3) extraction of dust wet with dichloromethane. For each of the three sample preparation methods, extracts at three temperatures (110, 150, and 200 °C) above the critical temperature of R134a were performed. Eight PBDE congeners (BDE-28, -47, -99, 100, -153, -154, -183, and -209) in the SFE extracts were analyzed by liquid chromatography negative-ion atmospheric pressure photoionization tandem mass spectrometry (LC/NI-APPI/MS/MS). The optimum extraction of PBDEs from house dust using supercritical R134a is obtained when the dust is pre-wet with dichloromethane prior to extraction to swell the dust. For all sample preparation methods, higher temperatures afforded higher percent recoveries of the eight PBDE congeners. Only a combination of high-temperature (200 °C) and pre-wetting the dust with dichloromethane produced high recovery of the environmentally important, fully brominated PBDE congener, BDE-209.     

金属串配合物[Ni3(L)4(NCS)2](L = dpa-, mpta-, mdpa-, mppa-)结构和磁性的理论研究

应用密度泛函理论BP86方法结合自然键轨道分析方法对具有分子导线潜在应用前景的金属串配合物[Ni₃(L)₄(NCS)₂](L = dpa^- (1), mpta^- (2), mdpa^- (3), mppa^- (4))进行研究,分析了桥联配体L对Ni―Ni相互作用和磁耦合性质的影响.结果得到: (1)配合物的基态均是对应于五重态(HS)的反铁磁(AF)单重态, HS的能量和结构与AF态相近, Ni₃⁶⁺链形成了三中心四电子σ键(σ₂σ_nb¹σ^*1). (2) dpa^-引入甲基成为mdpa^-,对Ni―Ni、Ni―N距离影响不大; 3H-吡咯环和噻唑环取代吡啶环后, N1―N2、Ni―Ni距离增大, Ni2―N2键长缩短,但噻唑环的影响较小;故Ni―Ni相互作用强度为1 ≈ 3 > 2 > 4. (3)预测了3和4的J_ab值为-103和-88 cm^-1,随Ni―Ni相互作用增强磁耦合效应增大. Ni―Ni相互作用越大,通过Ni₃⁶⁺链σ型轨道的直接磁耦合越强; Ni2―N2键越强,通过涉及桥联配体的间接磁耦合越强,直接磁耦合比间接磁耦合更强.     

Local solvent density augmentation around a solute in supercritical solvent bath: 1. A mechanism explanation and a new phenomenon

A recently proposed partitioned density functional (DF) approximation (Phys. Rev. E 2003, 68, 061201) and an adjustable parameter-free version of a Lagrangian theorem-based DF approximation (LTDFA: Phys. Lett. A 2003, 319, 279) are combined to propose a DF approximation for nonuniform Lennard-Jones (LJ) fluid. Predictions of the present DF approximation for local LJ solvent density inhomogeneity around a large LJ solute particle or hard core Yukawa particle are in good agreement with existing simulation data. An extensive investigation about the effect of solvent bath temperature, solvent-solute interaction range, solvent-solute interaction magnitude, and solute size on the local solvent density inhomogeneity is carried out with the present DF approximation. It is found that a plateau of solvent accumulation number as a function of solvent bath bulk density is due to a coupling between the solvent-solute interaction and solvent correlation whose mathematical expression is a convolution integral appearing in the density profile equation of the DF theory formalism. The coupling becomes stronger as the increasing of the whole solvent-solute interaction strength, solute size relative to solvent size, and the closeness to the critical density and temperature of the solvent bath. When the attractive solvent-solute interaction becomes large enough and the bulk state moves close enough to the critical temperature of the solvent bath, the maximum solvent accumulation number as a function of solvent bath bulk density appears near the solvent bath critical density; the appearance of this maximum is in contrast with a conclusion drawn by a previous investigation based on an inhomogeneous version of Ornstein-Zernike integral equation carried out only for a smaller parameter space than that in the present paper. Advantage of the DFT approach over the integral equation is discussed.