Polysaccharides/silica hybrid materials: New perspectives for sustainable raw materials

Polysaccharides/silica hybrids prepared through sol-gel reaction have been studied as a model for new generation of hybrid materials for a virtually unlimited number of applications. Numerous studies have therefore attempted to increase the homogeneity between the organic and inorganic moieties using a wide variety of silica precursors and crosslinking reagents. The current review summarizes and discusses the attempts for using polysaccharides for producing hybrid materials with collective properties from the two counterparts. It discusses several issues and strategies to tune the homogeneity of polysaccharide/silica hybrids and the potential applicability of these hybrid materials in biomedical and industrial fields.     

A fast convenient method to prepare hybrid sol-gel materials with low volume-shrinkages

We present a simple and fast method for the synthesis of polyacrylates-silica hybrid materials with significantly low volume shrinkages through the sol-gel reactions of tetraethyl orthosilicate and 2-hydroxyethyl methacrylate along with the free-radical polymerization of the acrylate monomer. The volume shrinkage from the processible sol to the final product was about 6–20% for the hybrid materials having the silica contents up to about 50 wt-%. As a result of the low shrinkage, crack-free, transparent and monolithic hybrid materials of relatively large sizes can be prepared within a short period of 6 to 12 hours. The formation of covalent bonding between the organic and the silica components in the hybrid materials was demonstrated. Thermal stability of the polyacrylate component in the hybrid materials were found to be higher than that of the bulk polymer. Other vinyl polymers such as poly(methyl methacrylate) and polyacrylonitrile have also been incorporated into the inorganic silica sol-gel matrix by using this method.     

溶胶-凝胶法制备光固化聚氨酯丙烯酸酯杂化材料的研究

以溶胶-凝肢法制备的硅溶胶为无机相,聚氨酯丙烯酸酯为有机相,以γ-甲基丙烽酰氧丙基三甲氧基硅烷(TMSPM)为两相间的偶联剂,制得了光固化杂化材料。研究了未固化的杂化体系的稳定性问题,并对其进行了结构表征和性能研究。无机相与有机相通过共价键相连。使得杂化体系光固化膜高硬度的获得并没有以柔韧性的损失为代价。在无机物含量较低时,聚氨酯丙烯酸酯／二氧化硅杂化体系先固化膜的耐磨性略有提高。     

Organic-inorganic hybrid mesoporous silicas: functionalization, pore size, and morphology control

Topological design of mesoporous silica materials, pore architecture, pore size, and morphology are currently major issues in areas such as catalytic conversion of bulky molecules, adsorption, host-guest chemistry, etc. In this sense, we discuss the pore size-controlled mesostructure, framework functionalization, and morphology control of organic-inorganic hybrid mesoporous silicas by which we can improve the applicability of mesoporous materials. First, we explain that the sizes of hexagonal- and cubic-type pores in organic-inorganic hybrid mesoporous silicas are well controlled from 24.3 to 98.0 A by the direct micelle-control method using an organosilica precursor and surfactants with different alkyl chain lengths or triblock copolymers as templates and swelling agents incorporated in the formed micelles. Second, we describe that organic-inorganic hybrid mesoporous materials with various functional groups form various external morphologies such as rod, cauliflower, film, rope, spheroid, monolith, and fiber shapes. Third, we discuss that transition metals (Ti and Ru) and rare-earth ions (Eu(3+) and Tb(3+)) are used to modify organic-inorganic hybrid mesoporous silica materials. Such hybrid mesoporous silica materials are expected to be applied as excellent catalysts for organic reactions, photocatalysis, optical devices, etc.     

Interaction and Microstructure of Polyurethane/Silica Hybrid Films Prepared by Sol-Gel Process

The polyester/silica hybrid resins and their hybrid polyurethanes were prepared via in situ (IS) or blending (BL) method using different silica sols. The effects of preparation methods, silica type and content on the interaction and microstructure of polymer/silica hybrid materials were investigated by FTIR, viscosity measurement, TGA, DMA and SAXS, respectively. It was found that both IS and BL methods formed agglomerates of silica-rich phases and primary silica-rich phases in the hybrid films, but the former caused stronger interaction between silica and polymer than the latter, resulting in much bigger agglomerates and compacter structure. The ethoxy group at silica was favorable for enhancing the interaction between silica phase and polymer, even between silica phases as well. The interaction between silica phase and polymer caused increasing viscosity, modulus and Tg, while the interaction between silica phases themselves increased the extent of micro-phase separation, especially for the hybrid films prepared by IS method.     

Preparation of highly monodispersed hybrid silica spheres using a one-step sol-gel reaction in aqueous solution

The successful one-step preparation method of monodisperse hybrid silica particles was studied using organosilane chemicals in aqueous solution. In general, almost all of the hybrid silica materials were made by a complex method where organic materials were coated on the surface of silica substrate via chemical reaction. However, our novel method can be applied to prepare colloidal hybrid particles without using substrate material. This method has three advantages: (i) this simple method gives the opportunity to prepare hybrid particles with high monodispersity through the self-hydrolysis of various organosilane monomers in aqueous solution, (ii) this efficient method can be applied to load lots of organic functional groups on the surface of silica particles through a one-step preparation method using only organosilane, and (iii) this effective method can be used to control the particle size of the product by changing the experimental conditions such as the concentration of the precursor or the reaction temperature. Detailed characterization of the hybrid particles by scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis (TGA) was performed to elucidate the morphologies and properties of the hybrid silica particles.     

SYNTHESIS OF CATALYSIS BY THE FUNCTIONALIZATION OF SILICA AND ITS APPLICATIONS

Hybrid organic-inorganic silica materials containing organic functional groups have been preparedby the reaction of activated silica with a silane coupling reagent such as N-(2-aminoethyl)3-aminopropyltrimethoxysilane. The hybrid silica was further modified by organic compounds having abifunctional group. These modified hybrid silicas were used as catalysts for various nucleophilic reactions.And also, these were complexed with metallic ions for use as catalysts for oxygen oxidation of hydrocarbons.     

Intercalation synthesis of functional hybrid materials based on layered simple hydroxide hosts and ionic liquid guests--a pathway towards multifunctional ionogels without a silica matrix?

Functional hybrid materials on the basis of inorganic hosts and ionic liquids (ILs) as guests hold promise for a virtually unlimited number of applications. In particular, the interaction and the combination of properties of a defined inorganic matrix and a specific IL could lead to synergistic effects in property selection and tuning. Such hybrid materials, generally termed ionogels, are thus an emerging topic in hybrid materials research. The current article addresses some of the recent developments and focuses on the question why silica is currently the dominating matrix used for (inorganic) ionogel fabrication. In comparison to silica, matrix materials such as layered simple hydroxides, layered double hydroxides, clay-type substances, magnetic or catalytically active solids, and many other compounds could be much more interesting because they themselves may carry useful functionalities, which could also be exploited for multifunctional hybrid materials synthesis. The current article combines experimental results with some arguments as to how new, advanced functional hybrid materials can be generated and which obstacles will need to be overcome to successfully achieve the synthesis of a desired target material.     

Synthesis of fullerene-silica hybrid materials

Fullerene/silica hybrid materials were obtained by radiation grafting on silica surface of toluene or decalin solutions of C₆₀. As determined by thermogravimetric analysis, the amount of C₆₀ grafted on silica surface was dependent from the radiation dose administered and independent from the C₆₀ concentration and the nature of the organic solvent. In absence of air, a dose of 48 kGy was sufficient to ensure a grafting level of 30% by weight of C₆₀ in the hybrid material. The fullerene/silica hybrid material shows a remarkable thermal stability, since the early decomposition starts above 300 °C as measured by DTG and DTA. The chemical structure of the fullerene/silica hybrid material was determined by FT-IR spectroscopy and with solid state ¹³C CP-MAS NMR. The potential application of such materials has been outlined.     

Organic-Inorganic Hybrid Materials with the Ability to Bind Metal Ions: Calorimetric Properties and Thermostability

Organic-inorganic hybrid materials with excellent heavy metal ions chelating properties were synthesized by covalent bonding of multifunctional polymers of polyamidoamine (PAA) type onto silica. Two series of polyamidoamine-silica hybrid materials differing in the PAA chemical structure were prepared and their thermal properties were investigated. Differential Scanning Calorimetry was used to study the effects of chain immobilization and ion chelation on the glass-transition temperature (Tg) of the polymers. The Tg of PAA-hybrid materials was elevated with respect to ungrafted PAAs. Complex formation with metal ions such as Cu⁺⁺ or Co⁺⁺ caused total suppression of Tg for both linear polymers as well as the corresponding hybrid materials. Finally, the silica particles slightly influenced the decomposition temperatures of linear polymers increasing their thermal stability.     

聚醚型氨酯酰亚胺/二氧化硅杂化材料的合成与性能研究

利用Sol Gel共聚合反应制备出聚醚型氨酯酰亚胺 (PUI) /二氧化硅 (SiO2 )杂化材料 .利用NMR、FTIR、TG、DSC及SEM等测试手段对性能进行了基本表征 .FTIR研究结果发现在 10 0℃下能同时完成有机相PUI的亚胺化和无机相SiO2 凝胶网络的Sol Gel转变 .TG及SEM发现SiO2 含量为 9wt%时SiO2 聚集相粒径在 0 2～1 0 μm之间 ,耐热性明显提高并达到最佳 ;发现SiO2 含量的增加其颗粒粒径不断增大 ,并不断聚集成大粒径SiO2 相 ,有机和无机相分离明显 .DSC研究显示 ,SiO2 相的引入 ,对杂化材料聚醚软段富集相的Tg 不产生明显影响 .     

From molecular chemistry to hybrid nanomaterials. Design and functionalization

This tutorial review reports upon the organisation and functionalization of two families of hybrid organic-inorganic materials. We attempted to show in both cases the best ways permitting the organisation of materials in terms of properties at the nanometric scale. The first family concerns mesoporous hybrid organic-inorganic materials prepared in the presence of a structure-directing agent. We describe the functionalization of the channel pores of ordered mesoporous silica, that of the silica framework, as well as the functionalization of both of them simultaneously. This family is currently one of the best supports for exploring polyfunctional materials, which can provide a route to interactive materials. The second family concerns lamellar hybrid organic-inorganic materials which is a new class of nanostructured materials. These materials were first obtained by self-assembly, as a result of van der Waals interactions of bridged organosilica precursors containing long alkylene chains during the sol-gel process, without any structure directing agent. This methodology has been extended to functional materials. It is also shown that such materials can be obtained from monosilylated precursors.     

Hybrid organic-inorganic silica materials containing di(2-pyridyl)methylamine-palladium dichloride complex as recyclable catalysts for Suzuki cross-coupling reactions

High surface hybrid silica materials containing di(2-pyridyl)methylamine-palladium dichloride complex covalently bonded to the silica matrix were prepared by sol-gel process and successfully tested as reusable catalysts for Suzuki cross-coupling reactions.     

有序介孔硅胶及其复合材料作固定相在液相色谱中的应用

系统地介绍了有序介孔硅胶及其复合材料的研究进展。重点评述了颗粒状无机介孔硅胶材料、颗粒状有机-无机复合介孔硅胶材料、手性介孔硅胶材料和整块介孔硅胶材料在用作液相色谱固定相方面的最新进展。对硅基有序介孔材料制备方面存在的问题进行了分析,并就该领域今后的发展趋势做了展望。     

Radiation-induced polymerization and grafting of β(−)pinene on silica surface

Poly-β-pinene (pBp) was obtained on silica surface by γ radiation-induced polymerization of β(−)pinene in presence of silica gel with a specific surface area of 300 m²/g. Different radiation doses were employed in the range 50–332 kGy. The pBp–silica hybrid samples obtained have been characterized by FT-IR spectroscopy and the amount of pBp on silica surface has been determined both by gravimetric and TGA measurements. The fraction of pBp chemically grafted on silica surface has been determined by the extraction of the pBp–silica hybrid with boiling toluene and was found to be 10–20% of the total pBp formed on silica surface. The optical activity of pBp extracted from the hybrid was studied by polarimetric measurements and found slightly lower than the typical specific optical rotation of pBp polymerized in bulk with radiation. The thermal stability of the pBp–silica hybrid materials was studied by thermogravimetric and differential thermal analysis. The results show lower thermal stability for the pBp–silica hybrid in comparison to pure pBp. Evidently, silica catalyzes the thermal decomposition of pBp at lower temperatures. Use of the pBp–silica hybrid as stationary phase for liquid chromatography for chiral separations has been proposed.     

Crosslinked organosiloxane hybrid materials prepared by condensation of silanol and modified silica: Synthesis and characterization

Hybrid materials based on polymethylphenylsiloxane (PMPS) and organic functionalized silica were synthesized via condensation reaction between silanol and alkoxysilyl groups in the presence of quaternary ammonium hydroxide. The structure of prepared materials was investigated by FTIR and NMR, which indicate that the products have incorporated modified silica into the polymer matrix. The prepared hybrid materials show a satisfactory thermal resistance because the initial decomposition of typical product occurred at nearly 100 K higher than that of the pure polymer according to the thermogravimetric analysis (TGA) results. Differential thermogravimetric analysis (DTGA) data confirm that the thermal degradation of prepared hybrid materials comprises of two steps, of which the first one could be controlled by adjusting the content of silica particles and the ratio of surface groups on the particles. The coating films obtained from hybrid products exhibit good thermal mechanical properties. Therefore, the materials are hoped to be used for the application in thermal resistant coating.     

Ordered mesoporous materials at the beginning of the third millennium: new strategies to create hybrid and non-siliceous variants

In recent years, research efforts in the field of ordered mesoporous materials are shifting towards either hybrid materials, containing both inorganic (typically silica) and organic functionalities, or towards variants that do not contain silica at all. Promising examples of hybrid materials are periodic mesoporous organosilicas (PMOs); examples of non-siliceous mesoporous materials are carbons, polymers and metal oxides. They can be further tuned to obtain structures with a wide range of functional groups, and are candidates for applications in adsorption, catalysis, sensoring, microelectronics and several other applications.     

Synthesis and characterization of UV‐curable phosphorus containing hybrid materials prepared by sol–gel technique

In this study, a series of ultraviolet (UV)‐curable organic–inorganic hybrid coating materials containing phosphorus were prepared by sol–gel approach from acrylate end‐capped urethane resin, acrylated phenyl phosphine oxide oligomer (APPO), and inorganic precursors. TEOS and MAPTMS were used to obtain the silica network and Ti:acac complex was employed for the formation of the titania network in the hybrid coating systems. Coating performance of the hybrid coating materials applied on aluminum substrates was determined by the analysis techniques, such as hardness, gloss, impact strength, cross‐cut adhesion, taber abrasion resistance, which were accepted by international organization. Also, stress–strain test of the hybrids was carried out on the free films. These measurements showed that all the properties of the hybrids were enhanced effectively by gradual increase in sol–gel precursors and APPO oligomer content. The thermal behavior of the hybrid coatings was investigated by thermogravimetric analysis (TGA) analysis. The flame retardancy of the hybrid materials was examined by the limiting oxygen index (LOI); the LOI values of pure organic coating (BF) increased from 31 to 44 for the hybrid materials containing phosphorus (BF‐P:40/Si:10). The data from thermal analysis and LOI showed that the hybrid coating materials containing phosphorus have higher thermal stability and flame resistance properties than the organic polymer. Besides that, it was found that the double bond conversion values for the hybrid mixtures were adequate in order to form an organic matrix. The polycondensation reactions of TEOS and MAPTMS compounds were also investigated by ²⁹Si‐NMR spectroscopy. SEM studies of the hybrid coatings showed that silica/titania particles were homogenously dispersed through the organic matrix. In addition, it was determined that the hybrid material containing phosphorus and silica showed fibrillar structure. Copyright © 2009 John Wiley & Sons, Ltd.     

Preparation of polyimide/silica hybrid material by sol–gel process under basic catalysis: Comparison with acid conditions

Hybrid polyimide/silica materials were prepared from polyimides bearing reactive functions along the polymer backbone, which can react with. The silica phase was formed by sol–gel process using ammonium hydroxide catalyst. Silica fillers prepared under basic conditions were compared with materials prepared using chlorhydric acid. The synthesized hybrid materials were characterized by TGA, IRTF, and NMR. The density of the different systems was also measured. The morphology of these hybrid systems were investigated by both scanning and transmission electron microscope. Thermal properties of the composites were also evaluated by DSC and DMA. The morphology of silica fillers highly depends on the catalyst, on the reaction conditions of the sol–gel process, and the linking formation with the polyimide. It results that optimized conditions lead to homogeneous hybrid films containing 12 wt % of silica particles of about 20 nm. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1891–1902, 2008     

Thermoresponsive transport through ordered mesoporous silica/PNIPAAm copolymer membranes and microspheres

Thermosensitive inorganic-organic hybrid polymers and gels can be used for controlled molecular transport in a variety of applications that require robust, mechanically stable materials. Silica and poly(N-isopropylacrylamide) (PNIPAAm) precursors were copolymerized in the presence of surfactant supramolecular assemblies to form hybrid gels with ordered nanostructure. This method was less complicated and results in enhanced reversible transport properties compared to previous approaches noted herein. In this study, the thermoresponsive polymer, PNIPAAm, was incorporated into polymerizing silica networks using the coupling agent 3-methacryloxypropyltrimethoxysilane. The hydration transition of PNIPAAm associated with its lower critical solution temperature (LCST) in aqueous solution was retained in the hydrated silica matrices and was used to control the permeability of membranes and molecular release behavior of particles. This report presents new methods for formation of hybrid silica/PNIPAAm membranes and particles, characterization of these materials, and documentation of reversible molecular transport properties of these new hybrid materials.