C-H/π-interaction-guided self-assembly in π-conjugated oligomers

We report CH/π hydrogen-bond-driven self-assembly in π-conjugated skeletons based on oligophenylenevinylenes (OPVs) and trace the origin of interactions at the molecular level by using single-crystal structures. OPVs were designed with appropriate pendants in the aromatic core and varied by hydrocarbon or fluorocarbon tails along the molecular axis. The roles of aromatic π-stack, van der Waals forces, fluorophobic effect and CH/π interactions were investigated on the theromotropic liquid crystallinity of OPV molecules. Single-crystal structures of hydrocarbon OPVs provided direct evidence for the existence of CH/π interactions between the π-ring (H-bond acceptor) and alkyl C-H (H-bond donor). The four important crystallographic parameters, d(c-x)=3.79 ?, θ=21.49°, φ=150.25° and d(Hp-x)=0.73 ?, matched in accordance with typical CH/π interactions. The CH/π interactions facilitate the close-packing of mesogens in x-y planes, which were further protruded along the c axis producing a lamellar structure. In the absence of CH/π interactions, van der Waals interactions drove the assembly towards a Schlieren nematic texture. Fluorocarbon OPVs exhibited smectic liquid-crystalline textures that further underwent Smectic A (SmA) to Smectic C (SmC) phase transitions with shrinkage up to 11%. The orientation and translational ordering of mesogens in the liquid-crystalline (LC) phases induced H- and J-type molecular arrangements in fluorocarbon and hydrocarbon OPVs, respectively. Upon photoexcitation, the H- and J-type molecular arrangements were found to emit a blue or yellowish/green colour. Time-resolved fluorescence decay measurements confirmed longer lifetimes for H-type smectic OPVs relative to that of loosely packed one-dimensional nematic hydrocarbon-tailed OPVs.     

Activated hierarchical porous carbon@π-conjugated polymer composite as cathode for high-performance lithium storage

Organic compounds become promising candidates for cathodes of rechargeable lithium battery (RLB) due to the high theoretical capacity and improved safety. However, they exhibit low conductivity and easy dissolution in electrolyte, which leads to the low utilization of active materials and poor cycling stability of RLBs. Here, we synthesize a novel composite of activated hierarchical porous carbon supporting poly(1,5-diamino-anthraquinone) (aHPC@PDAA), using Ce(SO₄)₂ as oxidant and naphthalenesulfonic acid (NSA) as soft template for PDAA. The as-synthesized composite exhibits uniformly nanoporous structure with nano-sized PDAA particles distributed homogenously inside and outside of pores. The aHPC@PDAA cathode for RLBs achieves high electrochemical performance with a discharge capacity as much as 250 mAh g^?1 at the current density of 100 mA g^?1, which still maintains 176 mAh g^?1 after 2000 charging-discharging cycles.     

Are the enolates of amides and esters stabilized by electrostatics?

The fact that amides and esters form less stable enolates than ketones might be seen as evidence that electrostatic stabilization is unimportant in these anions. However, ab initio molecular orbital calculations show that electrostatic stabilization does in fact lie beneath the competing resonance effect that causes the decrease in acidity. The electrostatic contribution is revealed by examining torsionally twisted amide and ester structures in which the pi resonance interactions are largely inhibited. These twisted amides and esters have greater enolate acidity than the corresponding ketones. Qualitatively similar behavior is observed with respect to protonation, such that twisted amides and esters are generally less basic than the reference ketones, in striking contrast to their behavior in the normal geometries.     

Molecular chirality induction to an achiral π-conjugated polymer by circularly polarized light

A preferred-handed helical conformation was induced to poly(9,9-dioctylfluoren-2,7-diyl) (PDOF) in a thin film form upon irradiation with single-handed circularly polarized light (CPL) where the induction was reversible.     

Efficient and stable tin-based perovskite solar cells by introducing π-conjugated Lewis base

Science China Chemistry - Tin-based perovskite solar cells (TPSCs) as the most promising candidate for lead-free PSCs have incurred extensive researches all over the world. However, the...     

π-Electron manipulation of the 5,6-dihydroxyindole/quinone system by 3-alkynylation: mild acid-mediated entry to (cross)-conjugated scaffolds and paradigms for medium-tunable chromophores

5,6-Dihydroxyindole-based systems engender increasing interest for the design and implementation of new functional aromatic scaffolds and eumelanin-like materials with tailored absorption and electronic properties. However, studies aimed at elucidating the influence of external π-conjugating groups on the redox properties and acid-induced reactivity of these highly oxidizable indolic platforms are lacking. We report herein the synthesis (as acetyl derivatives) and chemical/quantum chemical characterization of the first π-extended 5,6-dihydroxyindole derivatives, 3-ethynyl-5,6-dihydroxyindole (1) and 3,3'-(1,2-ethynediyl)bis-5,6-dihydroxyindole (2), in order to understand whether and how β extension of the enamine-like pyrrole sector affects the absorption properties, redox behavior, and protonation equilibria at both the o-diphenol and quinone levels. Oxidation of 1 and 2 proceeded smoothly to generate dark insoluble materials with eumelanin-like UV properties. On exposure to phosphate buffer at pH 3, 1 was rapidly converted to 3-acetyl-5,6-dihydroxyindole (5) and, in the presence of 5,6-dihydroxyindole, to the cross-conjugated 3,3'-ethenylidenebis-5,6-dihydroxyindole (6). DFT calculations on 1 and 2 and their quinones in their pristine states and after protonation provided a mechanistic frame to rationalize the unusual acid-mediated chemistry of 1 and disclosed 2-quinone as the prototype of a novel class of medium-dependent chromophores. The ethynyl(ene) structural motif is thus proposed as the key to new tunable π-electron extended 5,6-dihydroxyindole/5,6-indolequinone paradigms for the rational design of alkyne-containing hybrid eumelanin-type polymers.     

Anion modules: building blocks of supramolecular assemblies by combination with π-conjugated anion receptors

Dipyrrolyldiketone boron complexes, as π-conjugated acyclic anion receptors, act as building subunits of various assemblies through noncovalent interactions in the form of receptor-anion complexes. Instead of, or in addition to, the modification of receptor structures, the introduction of anion modules as building blocks for the assemblies was found to be useful in forming various soft materials. Gallic carboxylate derivatives 3-n (n = 16, 18, 20), as tetrabutylammonium (TBA) salts, form receptor-anion-module complexes that can be used to fabricate supramolecular assemblies. Combinations of aliphatic anion modules 3-n and receptors 1a,b along with a TBA cation afforded products with mesophases, which were indicated by differential scanning calorimetry and polarized optical microscopy. X-ray diffraction measurements of the solid states and mesophases of 1a·3-n·TBA and 1b·3-n·TBA revealed highly ordered structures including lamellar structures, which could be modulated by the lengths of the alkyl chains of the modules. Functional materials exhibiting electrical conductivity were fabricated by using combinations of anionic building blocks that form assemblies by themselves and π-conjugated acyclic receptors.     

Synthesis of Polysubstituted Meta-Halophenols by Anion-Accelerated 2π-Electrocyclic Ring Opening

Disrotatory – thermally allowed – 2π-electrocyclic ring-opening reactions require high temperatures to proceed. Herein, we report the first anion-accelerated 2π-electrocyclic ring opening of 6,6-dihalobicyclo[3.1.0]hexan-2-ones at low temperature to give the corresponding meta-halophenols in good to high yields (18 examples, 29–92 % yield, average: 65 %). Many of the phenols have unconventional substitution patterns and are reported here for the first time. Furthermore, the strength of the methodology was shown by the total synthesis of the densely functionalized phenolic natural product caramboxin (isolated as the lactam dehydrate). The reaction mechanism underlying the anion-acceleration was investigated in an ab initio study, which concluded that base-mediated proton abstraction anti to the concurrently departing endo-bromine was the initiating step in an overall concerted reaction mechanism leading directly to the meta-halophenol.     

Surface complexes of monomethyl phosphate stabilized by hydrogen bonding on goethite (α-FeOOH) nanoparticles

Typically, a significant fraction of phosphorus in soils is composed of organic phosphates, and this fraction thus plays an important role in the global phosphorus cycle. Here we have studied adsorption of monomethyl phosphate (MMP) to goethite (α-FeOOH) as a model system in order to better understand the mechanisms behind adsorption of organic phosphates to soil minerals, and how adsorption affects the stability of these molecules. The adsorption reactions and stability of MMP on goethite were studied at room temperature as a function of pH, time and total concentration of MMP by means of quantitative batch experiments, potentiometry and infrared spectroscopy. MMP was found to be stable at the water-goethite interface within the pH region 3-9 and over extended periods of time, as well as in solution. The infrared spectra indicated that MMP formed three predominating pH-dependent surface complexes on goethite, and that these interacted monodentately with surface Fe. The complexes differed in hydrogen bonding interactions via the auxiliary oxygens of the phosphate group. The presented surface complexation model was based on the collective spectroscopic and macroscopic results, using the Basic Stern approach to describe the interfacial region. The model consisted of three monodentate inner sphere surface complexes where the MMP complexes were stabilized by hydrogen bonding to a neighboring surface site. The three complexes, which had equal proton content and thus could be defined as surface isomers, were distinguished by the distribution of charge over the 0-plane and β-plane. In the high pH-range, MMP acted as a hydrogen bond acceptor whereas it was a hydrogen bond donor at low pH.     

Charge dynamics in solar cells with a blend of π-conjugated polymer-fullerene studied by transient photo-generated voltage

The biphasic feature of transient photo-generated voltage (TPV) is investigated in organic solar cells (OSCs) with a blend active layer of poly(3-hexylthiophene) (P3HT) and phenyl C61 butyric acid methyl ester (PCBM). The positive and negative components in biphasic TPV are explained through PCBM only and P3HT only devices. The negative and positive components are ascribed to the dipole formation at the buried interface of P3HT/indium tin oxide (ITO) and PCBM/ITO respectively. Based on these findings, two fundamental phenomena are revealed as follows: (1) interfacial modification on the buried interface inverts the negative component in biphasic TPV to a positive component, which prevents the leakage current channel in the conventional OSC structure; and (2) the solvent chosen transforms the positive component in biphasic TPV into a negative signal, which blocks the leakage current channel in the inverted OSC structure. Consequently, the study of TPV polarity provides the justification of the interaction at the buried interface. Besides, the decay of TPV is found to be bi-exponential, which can be used as a tool to estimate the degree of charge balance in OSCs.     

Isolation of a PBP-pincer rhodium complex stabilized by an intermolecular C-H σ coordination as the fourth ligand

A little help from my friends: a highly reactive, 16-electron square-planar rhodium complex was isolated. This species displays an intermolecular interaction between the rhodium and the C-H bond of another molecule as the fourth ligand to form an infinite network in the crystal lattice. The complex undergoes oxidative addition to the O-H bond of phenol or a primary alkyl alcohol to give the corresponding hydrido-phenoxido Rh(III) complex or carbonyl Rh(I) complex, respectively.     

Reactive N-protonated isocyanate species stabilized by bis(μ-hydroxo)divanadium(IV)-substituted polyoxometalate

O- or N-protonated? The bis(μ-hydroxo)divanadium(IV)-substituted γ-Keggin-type polyoxometalate (see picture, left) (TBA)(4)[γ-SiV(IV)(2)W(10)O(36)(μ-OH)(4)] (TBA = tetra(n-butyl)ammonium) was synthesized and characterized by X-ray crystallography. Its reaction with phenyl isocyanate gave (TBA)(4)[γ-SiV(IV)(2)W(10)O(38)(μ-OH)(2)(PhNHCO)(2)], which contains two N-protonated phenyl isocyanate species and catalyzes the cyclotrimerization of phenyl isocyanate.     

Bis-ortho-substitution by methyl groups dramatically increases the racemization barrier of Tröger bases

We have shown through racemization kinetics studies that the enantiomerization barriers of the bis‐ortho‐methyl substituted Tröger bases 2 and 3 in acidic media are raised by 30 kJ mol^?1 relative to the parent compound 1 , that is 130.4(4) and 131.6(4) kJ mol^?1, respectively (105 °C, pH 1, ethylene glycol). The enantiomerization barrier of para‐methoxy‐para‐nitro substituted Tröger base 4 was determined by dynamic capillary electrophoresis to 96.3(2) kJ mol^?1 (25 °C, pH 2.2, H₂O), which is lower by 5 kJ mol^?1 relative to 1 . The influence of deutero‐substitution on the racemization rates was also studied. The influence of steric and electronic factors on the enantiomerization barrier was investigated by quantum‐mechanical (DFT) calculations. It is shown that enantiomerization takes place in two steps: ring‐opening and further interconversion of the monocyclic intermediate. For the interconversion to occur a transition state has to be passed which is sensitive to steric effects. Ortho‐substitution by methyl groups significantly increases the energy of this state. Thus, compounds 2 and 3 are the simplest Tröger bases which are configurationally stable in acidic media.     

First example of [6π+2π] cycloaddition of 1,2-dienes to 1,3,5,7-cyclooctatetraene catalyzed by CoI compounds

A stereoselective [6π+2π] cycloaddition of 1,2-dienes to 1,3,5,7-cyclooctatetraene in the presence of a multi-component catalytic system CoI₂/dppe/Zn/ZnI₂, which led to the formation of substituted (E)-bicyclo[4.2.2]deca-2,4,7-trienes in 76—87% yields, was accomplished for the first time.     

“Binding” of water by ions

Summary We confirmed the inadequacy of the correction for, binding of water by ions for explaining the discrepancy between the electrostatic theory in [2] and experiment.     

The Electroluminescence Characterization of Poly(p-phenyleneethynylene)——The π-conjugated Backbone Interrupted by a Butylene Unit

IntroductionSince the firstreport in1 990 of the electro- lu-minescence of the conjugated polymers in the filmof poly(p- phenylenevinylene) sandwiched betweenan anode and a cathode of appropriate work func-tions[1] ,enormous efforts have been devoted to thesynthesis of light emitting polymers[2— 4 ] .Owing toconjugated polymers′ photoluminescence and elec-troluminescence having been found out,their im-portant properties,polymer processability,bandgap tunability and mechanical flexibility mak…     

Polymerization by phase transfer catalysis—5. Polycarbonates from diphenols with aromatic side groups

Polycarbonates were synthesized from phosgene and three different diphenols under phase transfer conditions, using quarternary ammonium and phosphonium salts and dichloromethane as solvent. The polycarbonates were characterized by i.r. and ¹H-NMR; the molecular weights were estimated from inherent viscosity measurements. The influences of the catalysts and the structure of the diphenol were studied; both exert an important effect on the molecular weights. The hydrolysis of the polycarbonates was studied by the variation of the η_inh values, the polymer undergoes a hydrolytic process in the organic phase, influenced by the catalysts, according to their structure.     

Direct access to β-oxodiazo compounds by copper(II)-catalyzed oxidative rearrangement of stabilized vinyl diazo derivatives

The copper(II)-catalyzed reaction of alkenyldiazo compounds with iodosylbenzene leading to β-oxodiazo derivatives is reported. This process occurs via an unprecedented 1,2-shift of the diazoacetate function. A selection of the synthetic applications of a representative member of this new class of functionalized diazo derivatives in the regioselective synthesis of substituted 1,4-dicarbonyl compounds is also reported.     

Stereoselective Desymmetrization of gem-Diborylalkanes by “Trifluorination”

An efficient and general method for the chemoselective synthesis of unsymmetrical gem-diborylalkanes is reported. This method is based on a late-stage desymmetrization through nucleophilic “trifluorination”, providing chiral gem-diborylalkanes bearing a trifluoroborate group. The reaction offers a highly modular and diastereoselective approach towards the synthesis of gem-diborylcyclopropanes. The utility of the gem-diborylalkane building blocks was demonstrated by selective post-functionalization of the trifluoroborate group. These functionalizations include inter- and intra- Pd-catalyzed Suzuki–Miyaura coupling reactions.