Complexation of 3-hydroxy-2,2′-iminodisuccinic acid (HIDS) with Mg2+, Ca2+, Mn2+, Fe3+, Fe2+, Co2+, Ni2+, Cu2+, and Zn2+ ions in aqueous solution

In a search for environmental-friendly metal chelating ligands for industrial applications, the protonation and complex formation equilibria of 3-hydroxy-2,2′-iminodisuccinic acid with Mg²⁺, Ca²⁺, Mn²⁺, Fe³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺ ions in aqueous 0.1 mol L^?1 NaCl solution were studied at 25°C by potentiometric titration. The model for complexation and the stability constants of the different complexes were determined for each metal ion using the computer program SUPERQUAD. In all cases, complex formation was dominated by stable ML ^{n ?4} complexes.     

Étude structurale comparée des chromates: M(I)M(III)(CrO4)2; M(I) = Li+, Na+, K+, Rb+, Cs+, NH4+, Ag+ et Tl+; M(III) = Al3+, Fe3+, Cr3+, Tl3+ et Bi3+

Among compounds of formula type M(I)M(III)(CrO₄)₂, the structures of trivalent bismuth compounds are always different from the others, because the surrounding of bismuth is never well-defined. Besides, nearly all these compounds have two-dimensional structures with the exception of Tl(I)Tl(III)(CrO₄)₂ which is three-dimensional. This structural type can exist only when the ionic radius of the monovalent cation has a value near that of O²⁻ ion (1.40 Å), as for Rb⁺, NH₄⁺ and Tl⁺.     

一种含芴聚合物对Pb2+,Cd2+,Cr3+金属离子的检测

利用一种芴类共轭聚合物,通过紫外分光光度计与荧光分光光度计测试其对Pb~(2+),Cd~(2+)和Cr~(3+)三种金属离子的紫外响应性与荧光淬灭性。在聚合物溶液中分别加入Pb~(2+),Cd~(2+)和Cr~(3+)三种金属离子,紫外吸收峰位于298nm和308nm;荧光最大发射峰位于335nm。研究发现,Pb~(2+)对聚合物溶液的紫外响应性有影响,Cd~(2+)和Cr~(3+)对聚合物溶液的紫外响应性无明显影响;Pb~(2+)对聚合物溶液的荧光强度有轻微增强的作用,而加入Cd~(2+)和Cr~(3+)的聚合物溶液荧光强度骤降,发生了明显的淬灭。不同pH值范围下的光谱研究表明,pH值在5.0～6.0区间时,加入Cr~(3+),聚合物溶液荧光强度明显下降;pH值在6.0～7.0区间时,加入Cd~(2+),荧光强度明显下降;pH值在4.5～6.0区间时,加入Pb~(2+),荧光强度明显下降。     

Méthode de dosage spécifique de l'alanine et de la somme sérine + acide aspartique

Résumé La méthode indiquée parKendall etFriedemann pour le dosage de l'alanine n'est nullement spécifique de cet acide aminé; les modifications queFürth et ses collaborateurs ont apporté à cette méthode dans le but de la rendre spécifique, n'ont atteint ce but que partiellement, et par des moyens compliqués.Le présent travail montre qu'il suffit d'ajouter à la solution des hydroxyacides provenant de la désamination des acides aminés, le dixième de son volume d'une solution d'acétate mercurique à 5% pour empêcher au cours del'oxydation ulterieure par le permanganate, toute production d'acétaldéhyde à partir de la sérine et de l'acide aspartique; dans ces conditions, l'acétaldéhyde formé ne provient plus que de l'alanine. La réaction colorimétrique donnée par l'acétaldéhyde avec le nitroprussiate de soude et la pipérazine, permet d'en faire le dosage spécifique en présence des autres aldéhydes fournis pas les autres acides aminés. Il est ainsi possible de doser l'alanine d'une façon rigoureusement spécifique en présence d'acides aminés quelconques. Cette méthode permet la détermination, à 5% près, de 2 mgr. et plus d'alanine.En modifiant les conditions d'oxydation par le permanganate (augmentation de la concentration en SO₄Mn, et de la durée d'oxydation) et en supprimant l'addition d'acétate mercurique, on obtient une production quantitative d'acétaldéhyde à partir de l'ensemble alanine + sérine + acide aspartique; il est ainsi possible de doser la somme de ces trois acides aminés en présence d'acides aminés quelconques, et de déterminer, par conséquent, la teneur d'un mélange d'acides aminés quelconques en alanine d'une part et en l'ensemble sérine + acide aspartique de l'autre. Les chiffres obtenus correspondent à 95 à 97% de la teneur réelle en alanine, et à 93 à 95% de la teneur réelle en sérine + acide aspartique.

---

Summary The method given byKendall andFriedemann for the determination of alanine is by no means specific for this amino acid.Fürth and his co-workers introduced some modifications in order to make the method specific. The aim, however, was obtained but partially and by complicated means.It is shown in the paper present that it is sufficient to add to the solution of the hydroxy-acids formed by desamination of the amino-acids, one tenth of its volume of a 5% mercuric acetate solution, in order to inhibit the formation of acetaldehyde from serine and aspartic acid during the ultimate oxidation by permanganate. Acetaldehyde formed under those circumstances solely originates from alanine. The colour reaction which acetaldehyde gives with sodium nitroprussiate and piperazine, is specific. Thus, a colorimetric determination of acetaldehyde in presence of other aldehydes originating from the other amino-acids, is made possible. It ensues that a strictly specific determination of alanine in the presence of any other amino acid can be performed. This method allows to determine, at least, 2 mgs. of alanine, the limit of error being about 5%. By altering the conditions of the permanganate oxidation (i. e. by augmenting the concentration of manganous sulphate or by extending the time of oxidation) and by omitting the addition of mercuric acetate, acetaldehyde is formed quantitatively as a product of the sum of alanine + serine + aspartic acid. It is possible, in this way, to determine the sum of these three amino acids in presence of any other amino acids and to calculate therefrom the quantity of both alanine and the sum of serine + aspartic acid, contained in a mixture of whatsoever amino acids. The figures obtained represent 95–97% of the true alanine content, and 93–95% of the true content of serine + aspartic acid.

---

Zusammenfassung Die vonKendall undFriedemann für die Bestimmung des Alanins angegebene Methode ist für diese Aminosäure keineswegs spezifisch. Die Modifikationen, die vonFürth und seinen Mitarbeitern eingeführt wurden, um die Methode spezifisch zu gestalten, erreichen dieses Ziel nur teilweise und durch komplizierte Mittel.Die vorliegende Arbeit zeigt, daß es genügt, der Lösung der Oxysäuren, die bei der Desaminierung der Aminosäuren entstehen, ein Zehntel ihres Volumens an 5%iger Quecksilberacetatlösung zuzufügen, um die Entstehung von Acetaldehyd aus dem Serin und der Asparaginsäure bei der schließlichen Oxydation mit Permanganat zu verhindern. Der unter diesen Umständen gebildete Acetaldehyd entsteht lediglich aus dem Alanin. Die Farbreaktion, die der Acetaldehyd mit Nitroprussidnatrium und Piperazin gibt, ist spezifisch und ermöglicht eine kolorimetrische Bestimmung in Gegenwart anderer Aldehyde, die aus den anderen Aminosäuren entstehen. Es ist mithin eine streng spezifische Bestimmung des Alanins in Gegenwart irgendeiner anderen Aminosäure möglich. Diese Methode gestattet die Bestimmung von wenigstens 2 mg Alanin bei einer Fehlergrenze von ungefähr 5%. Wenn man die Bedingungen bei der Permanganatoxydation ändert (durch Erhöhen der Konzentration von MnSO₄, bzw. der Oxydationsdauer) und das Zufügen von Quecksilberacetat unterläßt, erfolgt die Bildung des Acetaldehyds quantitativ, und zwar aus der Summe Alanin + Serin + Asparaginsäure; es ist auf diese Weise möglich, die Summe dieser drei Aminosäuren in Gegenwart beliebiger anderer Aminosäuren zu bestimmen und daraus den Gehalt eines Gemisches beliebiger Aminosäuren an Alanin einerseits und an der Summe Serin + Asparaginsäure andererseits zu bestimmen. Die erhaltenen Zahlen entsprechen 95 bis 97% des wahren Alaningehaltes und 93 bis 95% des wahren Gehaltes an Serin + Asparaginsäure.

     

Tb3+离子发光探针研究Ca2+,La3+和Al3+与拟南芥钙调素的竞争结合

利用Tb3 离子的发光, 研究了Tb3 与拟南芥钙调素 (CaM)结合的荧光光谱及荧光滴定曲线特点, 然后利用Tb3 4*CaM系统在221 nm直接激发和280 nm敏化激发的光谱变化研究了Ca2 , La3 和Al3 与拟南芥钙调素 (CaM) 的竞争结合作用. 结果表明: Tb3 , La3 与钙调素的竞争结合能力强于Ca2 , 而Tb3 的竞争结合力又大于La3 , Ca2 与钙调素的结合力远大于Al3 . 竞争实验的结果从分子水平上揭示了Tb3 , La3 和Al3 等金属离子生物效应可能的分子机制.     

Étude de la phényl-2 oxine et de ses chélates: Constantes de dissociation de la phényl-2 oxine

The authors determined, by spcctrophotometric and potentiometric methods, the ionization constants of 2-phenyl-8-quinolinol in hydroalcoholic solutions.     

碱土金属离子(Mg2+,Ca2+,Ba2+)掺杂对长余辉荧光粉SrAl2O4:Eu2+,Dy3+发光性能的影响

采用高温固相法制备了碱土金属离子(Mg2 ,Ca2 ,Ba2 )掺杂的SrAl2O4:Eu2 ,Dy3 长余辉荧光粉.XRD谱分析表明,随着基质中掺人的碱土金属离子(Mg2 ,Ca2 ,Ba2 )浓度增加,基质晶格常数也随之发生变化.Mg2 ,Ca2 和Ba2 3种碱土离子在SrAl2O4中的固溶范围分别为40%,15%和30%.光谱分析则表明在固溶范围内随着掺杂Mg3 ,Ca2 和Ba2 浓度的增大,样品的发射峰值会在480～530 nm范围出现规律性移动.适当浓度的Mg2 ,Ba2 掺杂会不同程度地提高样品的发光强度,而Ca2 的掺杂则会降低发光强度.但是碱土金属离子(Mg2 ,Ca2 ,Ba2 )的掺杂并不能延长SrAl2O4:Eu2 ,Dy3 荧光粉的余辉时间.     

Eu3+在SrZnP2O7中的发光性能和Eu3+, Bi3+间的能量传递

采用高温固相法合成了SrZnP2O7：Eu^3＋荧光粉,该荧光粉的激发主峰值位于400nm,适用于UVLED管芯的激发;在紫外激发下的发射峰由位于591和597nm（^5D0～^7F1）,616,624和629nm（^5D0～^7F2）,656nm（^5D0～^7F3）及688nm（^5D0～^7F4）4组线状峰构成,对应Eu^3＋的特征跃迁,呈现橙红色发光。分析了Eu^3＋离子浓度对样品发光效率的影响,随着浓度增加,其发射一直增强,但其发光效率已经开始减弱。Bi^3＋的加入使发光强度得到很大提高,并讨论了在SrZnP2O7基质中Bi^3＋对Eu^3＋的能量传递和敏化作用。     

高锰酸钾-鲁米诺反应体系中碱土金属离子Mg2+,Ca2+,Sr2+,Ba2+化学发光行为研究

将被认为没有化学发光活性的第二主族(碱土金属)离子Mg^2 ,Ca^2 ,Sr^2 ,Ba^2 溶液注入到已充分反应的高锰酸钾与鲁米诺混合液中时,又发生了新的化学发光反应,并检测到强的化学发光信号．在对有关反应的动力学性质、化学发光光谱、紫外可见光谱及其它一系列实验研究的基础上,提出了可能的化学发光反应机理．同时,优化了反应条件,评价了这一反应用于Mg^2 ,Ca^2 ,Sr^2 ,Ba^2 分析的可行性．     

li+掺杂对casio3∶pb2+,mn2+晶体结构及荧光性能的影响

li+掺杂;偏硅酸盐;晶体结构;荧光性能     

Re-dispersion and film formation of GdVO4 : Ln3+ (Ln3+ = Dy3+, Eu3+, Sm3+, Tm3+) nanoparticles: particle size and luminescence studies

GdVO(4)?:?Ln(3+) (Ln(3+) = Dy(3+), Eu(3+), Sm(3+), Tm(3+)) nanoparticles are prepared by a simple chemical route at 140 °C. The crystallite size can be tuned by varying the pH of the reaction medium. Interestingly, the crystallite size is found to increase significantly when pH increases from 6 to 12. This is related to slower nucleation of the GdVO(4) formation with increase of VO(4)(3-) present in solution. The luminescence study shows an efficient energy transfer from vanadate absorption of GdVO(4) to Ln(3+) and thereby enhanced emissions are obtained. A possible reaction mechanism at different pH values is suggested in this study. As-prepared samples are well dispersed in ethanol, methanol and water, and can be incorporated into polymer films. Luminescence and its decay lifetime studies confirm the decrease in non-radiative transition probability with the increase of heat treatment temperature. Re-dispersed particles will be useful in potential applications of life science and the film will be useful in display devices.     

The pK 2 * for the dissociation of H2SO3 in NaCl solutions with added Ni2+, Co2+, Mn2+, and Cd2+ at 25°C

The pK ₂ ^* for the dissociation of sulfurous acid from I=0.5 to 6.0 molal at 25°C has been determined from emf measurements in NaCl solutions with added concentrations of NiCl₂, CoCl₂, McCl₂ and CdCl₂ (m=0.1). These experimental results have been treated using both the ion pairing and Pitzer's specific ion-interaction models. The Pitzer parameters for the interaction of M²⁺ with SO ₃ ^2? yielded $$\begin{gathered} \beta _{NiSO_3 }^{(0)} = - 5.5, \beta _{NiSO_3 }^{(1)} = 5.8, and \beta _{NiSO_3 }^{(2)} = - 138 \hfill \\ \beta _{CoSO_3 }^{(0)} = - 12.3, \beta _{CoSO_3 }^{(1)} = 31.6, and \beta _{CoSO_3 }^{(2)} = - 562 \hfill \\ \beta _{MnSO_3 }^{(0)} = - 8.9, \beta _{MnSO_3 }^{(1)} = 18.7, and \beta _{MnSO_3 }^{(2)} = - 353 \hfill \\ \beta _{CdSO_3 }^{(0)} = - 7.2, \beta _{CdSO_3 }^{(1)} = 13.8, and \beta _{CdSO_3 }^{(2)} = - 489 \hfill \\ \end{gathered} $$ The calculated values of pK ₂ ^* using Pitzer's equations reproduce the measured values to within ±0.01 pK units. The ion pairing model yielded $$\begin{gathered} logK_{NiSO_3 } = 2.88 and log\gamma _{NiSO_3 } = 0.111 \hfill \\ logK_{CoSO_3 } = 3.08 and log\gamma _{CoSO_3 } = 0.051 \hfill \\ logK_{MnSO_3 } = 3.00 and log\gamma _{MnSO_3 } = 0.041 \hfill \\ logK_{CdSO_3 } = 3.29 and log\gamma _{CdSO_3 } = 0.171 \hfill \\ \end{gathered} $$ for the formation of the complex MSO₃. The stability constants for the formation of MSO₃ complexes were found to correlate with the literature values for the formation of MSO₄ complexes.     

Étude de la phényl-2 oxine et de ses chélates: Préparation et propr1étés de la phényl-2 oxine

The authors prepared phenyloxin by three different methods. They obtained a product whose melting point was 59° C and then another form melting at 72° C. Ultraviolet absorption spectra were determined in cyclohexan and in alcohol-watermixtures; from these determiaations, the solubilities of phenyloxin in water and in alcohol-water mixtures of different concentrations were obtained. If ultraviolet absorption spectra are plotted for different pH values (from 1.1 to 13.7) several isobestic points are noted.     

Complexing Power of Vitamin D3 Toward Various Metals. Potentiometric Studies of Vitamin D3 Complexes with Al3+, Cd2+, Gd3+, and Pb2+ Ions in Water–Ethanol Solution

This study reports the stability constants of complexes with vitamin D₃ and Al³⁺, Cd²⁺, Gd³⁺ and Pb²⁺ ions in a water–ethanol medium (30/70% v/v at 25.0°C). The logarithms of the overall stability constants are: ₁ = 12.4 ± 0.5, 7.6 ± 0.3, 9.33 ± 0.07, and 9.1 ± 0.5, respectively, whereas the logarithms of ₂ are 24.4 ± 0.5 (Al³⁺), 14.3 ± 0.3 (Cd²⁺), and 15.4 ± 0.5 (Pb²⁺). Gd³⁺ forms only the 1:1 complex. These values are compared to those reported previously and correlations are established between the stability constants and physical properties, such as the ionization energy.     

Er3+, Yb3+:Y2O3激光陶瓷粉体制备与性能研究

以Y2O3,Yb2O3和Er2O3为原料,控制溶液的pH值为3-4左右,采用柠檬酸溶胶-凝胶法制备出Er,Yb∶Y2O3倍半氧化物激光陶瓷前驱粉体。对所得到的粉体进行XRD测试,结果表明最佳煅烧温度为1000℃,并且晶化完全。经过差热-热重分析表明,粉体在1000℃煅烧后不再失重。荧光光谱分析发现,荧光发射的最强峰位于1530 nm处,是Er^3＋的4^I13/2-4^I15/2谱相导致的荧光发射。     

Fe3+,Si4+掺杂TiO2纳米材料相变和热稳定性研究

Guth等人在1977年首次报道了铁(Ⅲ)掺杂二氧化钛催化剂对氮气光催化还原为氨具有独特的光催化效果,开辟了一条太阳能转化为化学能的新途径,引起了人们对铁(Ⅲ)掺杂二氧化钛的研究热潮。大量的研究结果表明,纯的二氧化钛或三氧     

Li+,Zn2+共掺杂对Gd2O3:Eu3+纳米粉结构和发光性能的影响

采用燃烧法制备出Li^＋,Zn^2＋掺杂的Gd2O3：Eu^3＋纳米荧光粉,研究了掺杂离子对Gd2O3：Eu^3＋的结晶性能、晶粒形貌和光致发光特性的影响.以X射线衍射（XRD）、透射电子显微镜（TEM）、发射光谱和衰减时间谱等手段表征材料性能.结果表明,Li^＋,Zn^2＋掺杂可显著提高Gd2O3：Eu^3＋纳米粉在611 nm处的发光强度,最大可达到未掺杂时的2.5倍.发光增强的主要原因可归结为3个方面： （1）使晶粒由单斜相向更利于发光的立方相转变; （2）氧空位的敏化剂作用; （3）掺杂离子的助熔剂效应,使晶粒的结晶性能提高、粒径增大,从而降低表面态引起的发光猝灭.     

Mechanism of simultaneous removal of Ca2+, Ni2+, Pb2+ and Al3+ ions from aqueous solutions using Purolite® S930 ion exchange resin

The sorption mechanism of Ca²⁺, Ni²⁺, Pb²⁺, and Al³⁺on ion exchange resin S930 has been studied as a function of pH in both mono-component and quaternary systems at ion ratio 1:1:1:1. The equilibrium of ion exchange process in mono-component systems has been followed as an adsorption process and it was tested for Langmuir and Freundlich isotherm equations. The selectivity coefficient of the resin for these cations varied in different manners depending on the pH range. The structural characteristics of pores in the initial resin and the resin after contact with synthetic solutions at pH 3.03 and 3.95 have been investigated by using SEM and EDAX techniques.