Ein Beitrag zur Kristallchemie der Kobaltoxoniobate: CoNb2O6 mit Rutilstruktur

CoNb₂O₆ can be prepared by reaction of stoichiometric amounts of CoO (thermical decomposition of cobaltoxalate) and Nb₂O₅ in argon-atmosphere up to 1,400 °C. The isolated red-brown single crystals have tetragonal symmetry (a=472.6;c=305.4 pm; space group P4₂/mnm-D _4h ¹⁴ ). Electron probe micro-analysis of the single crystals verifies the composition Co_0.33Nb_0.67O₂. Co²⁺ and Nb⁵⁺ occupy statistically the metal positions of the rutil-type structure. The differences between Co_0.5Nb_0.5O₂ (CoNbO₄AlNbO₄-type) and Co_0.38Nb_0.67O₂ (CoNb₂O₆) are discussed.

     

NixCo3-xO4表面修饰对CdSe/TiO2纳米管阵列光电化学氧化水活性的影响

利用氨挥发诱导法在CdSe/TiO2纳米管阵列表面负载一层NixCo3-xO4。采用SEM、XRD、XPS、UV-Vis对样品进行表征,通过线性扫描伏安法测定光阳极的释氧电势来评价其光电水氧化活性。结果表明:表面NixCo3-xO4是尖晶石结构;相对于CdSe/TiO2纳米管阵列光阳极,NixCo3-xO4/CdSe/TiO2光阳极能将光电氧化水的过电势降低430 mV。Ni离子的引入使得NixCo3-xO4表面富含三价阳离子(Ni3+,Co3+),从而促进CdSe/TiO2光阳极光电水氧化的进行。     

Activating CoOOH Porous Nanosheet Arrays by Partial Iron Substitution for Efficient Oxygen Evolution Reaction

Iron‐substituted CoOOH porous nanosheet arrays grown on carbon fiber cloth (denoted as Fe_xCo_1?xOOH PNSAs/CFC, 0≤x≤0.33) with 3D hierarchical structures are synthesized by in situ anodic oxidation of α‐Co(OH)₂ NSAs/CFC in solution of 0.01 m (NH₄)₂Fe(SO₄)₂. X‐ray absorption fine spectra (XAFS) demonstrate that CoO₆ octahedral structure in CoOOH can be partially substituted by FeO₆ octahedrons during the transformation from α‐Co(OH)₂ to Fe_xCo_1?xOOH, and this is confirmed for the first time in this study. The content of Fe in Fe_xCo_1?xOOH, no more than 1/3 of Co, can be controlled by adjusting the in situ anodic oxidation time. Fe_0.33Co_0.67OOH PNSAs/CFC shows superior OER electrocatalytic performance, with a low overpotential of 266 mV at 10 mA cm^?2, small Tafel slope of 30 mV dec^?1, and high durability.     

Efficient Selective Oxidation of Aromatic Alkanes by Double Cobalt Active Sites over Oxygen Vacancy-rich Mesoporous Co3O4

The development of efficient catalyst for selective oxidation of hydrocarbon to functional compounds remains a challenge. Herein, mesoporous Co₃O₄ (mCo₃O₄-350) showed excellent catalytic activity for selective oxidation of aromatic-alkanes, especially for oxidation of ethylbenzene with a conversion of 42 % and selectivity of 90 % for acetophenone at 120 °C. Notably, mCo₃O₄ presented a unique catalytic path of direct oxidation of aromatic-alkanes to aromatic ketones rather than the conventional stepwise oxidation to alcohols and then to ketones. Density functional theory calculations revealed that oxygen vacancies in mCo₃O₄ activate around Co atoms, causing electronic state change from Co³⁺_(Oh)→Co²⁺_(Oh). Co²⁺_(Oh) has great attraction to ethylbenzene, and weak interaction with O₂, which provide insufficient O₂ for gradual oxidation of phenylethanol to acetophenone. Combined with high energy barrier for forming phenylethanol, the direct oxidation path from ethylbenzene to acetophenone is kinetically favorable on mCo₃O₄, sharply contrasted to non-selective oxidation of ethylbenzene on commercial Co₃O₄.     

Atmospheric chemistry of n‐CH3(CH2)xCN (x = 0–3): Kinetics and mechanisms

Smog chamber/Fourier transform infrared (FTIR) techniques were used to measure the kinetics of the reaction of n‐CH₃(CH₂)_xCN (x = 0–3) with Cl atoms and OH radicals: k(CH₃CN + Cl) = (1.04 ± 0.25) × 10⁻¹⁴, k(CH₃CH₂CN + Cl) = (9.20 ± 3.95) × 10⁻¹³, k(CH₃(CH₂)₂CN + Cl) = (2.03 ± 0.23) × 10⁻¹¹, k(CH₃(CH₂)₃CN + Cl) = (6.70 ± 0.67) × 10⁻¹¹, k(CH₃CN + OH) = (4.07 ± 1.21) × 10⁻¹⁴, k(CH₃CH₂CN + OH) = (1.24 ± 0.27) × 10⁻¹³, k(CH₃(CH₂)₂CN + OH) = (4.63 ± 0.99) × 10⁻¹³, and k(CH₃(CH₂)₃CN + OH) = (1.58 ± 0.38) × 10⁻¹² cm³ molecule⁻¹ s⁻¹ at a total pressure of 700 Torr of air or N₂ diluents at 296 ± 2 K. The atmospheric oxidation of alkyl nitriles proceeds through hydrogen abstraction leading to several carbonyl containing primary oxidation products. HC(O)CN, NCC(O)OONO₂, ClC(O)OONO₂, and HCN were identified as the main oxidation products from CH₃CN, whereas CH₃CH₂CN gives the products HC(O)CN, CH₃C(O)CN, NCC(O)OONO₂, and HCN. The oxidation of n‐CH₃(CH₂)_xCN (x = 2–3) leads to a range of oxygenated primary products. Based on the measured OH radical rate constants, the atmospheric lifetimes of n‐CH₃(CH₂)_xCN (x = 0–3) were estimated to be 284, 93, 25, and 7 days for x = 0,1, 2, and 3, respectively.     

Liquid-Phase Cyclohexene Oxidation with O2 over Spray-Flame-Synthesized La1−xSrxCoO3 Perovskite Nanoparticles

La_1−xSr_xCoO₃ (x=0, 0.1, 0.2, 0.3, 0.4) nanoparticles were prepared by spray-flame synthesis and applied in the liquid-phase oxidation of cyclohexene with molecular O₂ as oxidant under mild conditions. The catalysts were systematically characterized by state-of-the-art techniques. With increasing Sr content, the concentration of surface oxygen vacancy defects increases, which is beneficial for cyclohexene oxidation, but the surface concentration of less active Co²⁺ was also increased. However, Co²⁺ cations have a superior activity towards peroxide decomposition, which also plays an important role in cyclohexene oxidation. A Sr doping of 20 at. % was found to be the optimum in terms of activity and product selectivity. The catalyst also showed excellent reusability over three catalytic runs; this can be attributed to its highly stable particle size and morphology. Kinetic investigations revealed first-order reaction kinetics for temperatures between 60 and 100 °C and an apparent activation energy of 68 kJ mol⁻¹ for cyclohexene oxidation. Moreover, the reaction was not affected by the applied O₂ pressure in the range from 10 to 20 bar. In situ attenuated total reflection infrared spectroscopy was used to monitor the conversion of cyclohexene and the formation of reaction products including the key intermediate cyclohex-2-ene-1-hydroperoxide; spin trap electron paramagnetic resonance spectroscopy provided strong evidence for a radical reaction pathway by identifying the cyclohexenyl alkoxyl radical.     

The oxygen deficient cubic perovskite SrFe1−xScxO3−δ (x ≤ 0.5; 0.1 ≤ δ ≤ 0.5): Structural features and physical properties

Solid state synthesis method has been used to stabilize oxygen deficient perovskite phases SrFe_1?xSc_xO_3?δ (0 ≤ x ≤ 0.5). The good homogeneity of samples is confirmed by energy dispersive spectroscopy (EDS) analysis performed with a transmission electronic microscope (TEM). By combining X-ray and electronic diffraction (ED), it is demonstrated that the cationic substitution on the B site of the perovskite induces a decrease of the oxygen content but without inducing long range ordering phenomenon. On this basis, X-ray patterns of compounds were indexed in the cubic Pm3m space group. The oxidation states of iron evidenced by Mössbauer spectroscopy, are in good agreement with the oxygen stoichiometries determined by cerimetric titration. In the SrFe_1?xSc_xO_3?δ series, the Fe³⁺/Fe⁴⁺ origin of the electronic conductivity is clearly evidenced. The limit compound SrFe_0.5Sc_0.5O_2.5 is highly resistive and characterized by a cluster glass-like behaviour. Finally, negative magnetoresistivity properties are revealed for the x = 0.1 and x = 0.2 samples, reaching ?10% around the magnetic transition temperature in a 7T magnetic field.     

Unusual oxidation states give reversible room temperature magnetocaloric effect on perovskite-related oxides SrFe0.5Co0.5O3

The magnetic properties and the magnetocaloric effect are presented for the perovskite-related oxide SrFe_0.5Co_0.5O₃ prepared using electrochemical oxidation. SrFe_0.5Co_0.5O₃ exhibits a second order paramagnetic-ferromagnetic transition close to room temperature (T_C=330 K). The maximal magnetic entropy change ΔS_M^Max , the maximal adiabatic temperature change ΔT_ad and the refrigerant capacity are found to be equal to respectively 4.0 J/kgK, 1.8 K and 258 J/kg while raising the B-field change from 0 to 5 T.     

THE PHOTOEXCITED TRIPLET STATE OF TETRAPHENYL CHLORIN, MAGNESIUM TETRAPHENYL PORPHYRIN AND WHOLE CELLS OF CHLAMYDOMONAS REINHARDI. A LIGHT MODULATION-EPR STUDY

Abstract— The photoexcited triplet states of frozen solutions of tetraphenyl chlorin (TPC), magnesium tetraphenyl porphyrin (MgTPP) and whole cells of Chlamydomonas reinhardi have been studied by light modulation-EPR spectroscopy. The porphyrins were chosen to be studied as model compounds for chlorophyll molecules, From EPR spectra the zero field splitting parameters (ZFS) were calculated. For TPC, |D| = 0.0364 ± 0.0002 cm^-1, |E| = 0.0063 ± 0.0002 cm^-1. For MgTPP, |D| = 0.0310 ± 0.0002 cm^-1. For chloroplasts, |D| = 0.0280 ± 0.0004 cm^-1, |E| = 0.0032 ± 0.0004 cm^-1. In all compounds studied, except MgTPP, electron spin polarization (ESP) was observed. From the analysis of the kinetic curves at each canonical orientation we evaluated the spin lattice relaxation rate W, the depopulation rate constants k_p, and the ratio between the population rate constants, A_p, at zero magnetic field. For TPC in ethanol-toluene (5:1) k_x= (0.70 ± 0.10) × 10³ s^-1, k_y= (0.40 ± 0.07) × 10³ s^-1, k_x= (0.24 ± 0.05) × 10³ s^-1; A_x:A_y:A_z? 1.0:0.6:0.4; W= (2.60 ± 0.40) × 10³ s^-1. For MgTPP, only the total decay rate constant, k_T, was calculated: (1.5 ± 0.2) × 10 s^-1 in n-octane and (4.8 ± 0.8) × 10 s^-1 in ethanol. The results for TPC and MgTPP are compared to those reported previously for chlorophyll. It is concluded that the dynamics of the photoexcited triplet state in chlorophylls are mainly governed by the chlorin macrocycle. From the EPR spectrum and ZFS parameters of chloroplasts, we propose that both chlorophyll a and chlorophyll b are the main constituents of the EPR spectrum. From the analysis of the kinetic curves we obtain separately the kinetic parameters for chlorophylls a and b, k^a_x= (1.30 ± 0.20) × 10³ s^-1, k^a_y;= (0.85 ± 0.15) × 10³ s^-1k^a_x= (0.32 ± 0.05) × 10³ s^-1; A^a_x:A^a_y:A^a_z? 1.0:0.7:0.2; W^a= (1.20 ± 0.20) × 10³ s^-1; k^b_x= (0.56 ± 0.09) × 10³ s^-1, k^b_y= (0.30 ± 0.04) × 10³ s^-1, k^b_z= (0.06 ± 0.01) × 10³ s^-1; A^b_x:A^b_y:A^b_x? 1.0:0.6:0.1; W^b= (5.00 ± 0.80) × 10³ s^-1. These results are very close to those found separately for chlorophyll a and chlorophyll b oligomers in vitro.     

Effects of strontium silicate on structure and magnetic properties of electrospun strontium ferrite nanofibers

The composite nanofibers of xSrSiO₃/(100 − x)SrFe₁₂O₁₉ (x = 0–13 wt%) with diameters around 110 nm have been prepared by calcination of the electrospun SrSiO₃/SrFe₁₂O₁₉/poly (vinyl pyrrolidone) (PVP) composite fibers at 800–900 °C. The composite nanofibers were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy and vibrating sample magnetometer. After calcined at 800° the M-type strontium ferrite is formed and the strontium silicate exists as an amorphous state when the calcination temperature below about 950 °C. The addition of SrSiO₃ has an obvious suppression effect on the strontium ferrite grain growth and the ferrite grain size decreases from 66.9 to 33.5 nm corresponding SrSiO₃ content from 0 to 9 wt% in the composite. The specific saturation magnetization (Ms) of the xSrSiO₃/(100 − x)SrFe₁₂O₁₉ composite nanofibers exhibits a continuous reduction from 58.0 to 45.6 A m² kg⁻¹ with the increase of SrSiO₃ content from 0 to 13 wt%. With addition of SrSiO₃ from 0 to 13 wt%, the coercivity of the composite nanofibers obtained at 900 °C initially increases, reaching a maximum value 501.1 kA m⁻¹ at the silicate content 7 wt%, and then shows a reduction tendency with the strontium silicate content increase further up to 13 wt%. This influence on the coercivity by strontium silicate can be attributed mainly to the ferrite grain growth suppression and the non-magnetic phase barrier for the domains misalignment.     

Electrochemical Oxidation of Nitrogen towards Direct Nitrate Production on Spinel Oxides

Nitrates are widely used as fertilizer and oxidizing agents. Commercial nitrate production from nitrogen involves high‐temperature‐high‐pressure multi‐step processes. Therefore, an alternative nitrate production method under ambient environment is of importance. Herein, an electrochemical nitrogen oxidation reaction (NOR) approach is developed to produce nitrate catalyzed by ZnFe_xCo_2?xO₄ spinel oxides. Theoretical and experimental results show Fe aids the formation of the first N?O bond on the *N site, while high oxidation state Co assists in stabilizing the absorbed OH^? for the generation of the second and third N?O bonds. Owing to the concerted catalysis, the ZnFe_0.4Co_1.6O₄ oxide demonstrates the highest nitrate production rate of 130±12 μmol h^?1 g_MO^?1 at an applied potential of 1.6 V versus the reversible hydrogen electrode (RHE).     

The structure, nonstoichiometry, and thermodynamic characteristics of oxygen in strontium ferrite doped with niobium, SrFe1 ? xNbxO3 ? δ

The influence of doping with niobium on the structure and oxygen nonstoichiometry of strontium ferrite SrFe_{1 − x} Nb _x O_{3 − δ} (x = 0.05, 0.1, 0.2, 0.3, and 0.4) was studied. The content of oxygen in the doped derivatives was determined by coulometric titration as a function of temperature (650–950°C) and oxygen partial pressure in the gas phase (10⁻⁴−1 atm). The partial molar enthalpies Δ(x, δ) and entropies Δ(x, δ) of oxygen in SrFe_{1 − x} Nb _x O_{3 − δ} were calculated. An analysis of Δ(x, δ) dependences showed that the model of a random distribution of ions and vacancies over accessible sites in the oxygen sublattice allowed the experimental data to be described satisfactorily. An increase in the partial enthalpy Δ(x, δ) as nonstoichiometry δ decreased was indicative of weak repulsive interactions between oxygen ions in the structure of SrFe_{1 − x} Nb _x O_{3 − δ}. Original Russian Text ? P.V. Anikina, A.A. Markov, M.V. Patrakeev, I.A. Leonidov, V.L. Kozhevnikov, 2009, published in Zhurnal Fizicheskoi Khimii, 2009, Vol. 83, No. 5, pp. 811–817.     

Design of high-performance core-shell hollow carbon nanofiber@nickel-cobalt double hydroxide composites for supercapacitive energy storage

The supercapacitive performances of supercapacitor mainly depend on the physical nanostructure and micro-morphology of electrode materials. Here, we demonstrated the design, synthesis and electrochemical performances of core-shell hollow carbon nanofiber@nickel-cobalt-layered double hydroxide (HCNF@ Ni_0.67Co_0.33-LDH) nanocomposites with an optimized Ni/Co molar ratio of 2:1. The HCNF was used as superiorly conductive core to sustain the nanoporous silky Ni_0.67Co_0.33-LDH shell, which can efficiently provide fast transport pathways for electrons and electrolyte ions. The outstanding specific capacitance of 2486 F g^?1 at 1 A g^?1 based on galvanostatic charge-discharge curves were acquired for the highly electroactive HCNF@Ni_0.67Co_0.33-LDH. Furthermore, the HCNF@Ni_0.67Co_0.33-LDH electrode delivered a distinguished rate capability with a specific capacitance of 1890 F g^?1 even at 15 A g^?1. Notably, an asymmetric supercapacitor with HCNF@Ni_0.67Co_0.33-LDH as cathode and HCNF as anode was devised, which presented a prominent specific capacitance of 228 F g^?1, good energy density of 62.1 Wh kg^?1, and impressive cycling stability (90.6% capacitance retention after 10,000 cycles).     

Hexaferrites and phase relations in the iron-rich part of the system Sr-La-Co-Fe-O

The iron rich part of the system was examined in the temperature range of 1200-1380 °C in air, with focus on the solid solutions of M-type hexaferrites. Samples of suitable compositions were studied by electronprobe microanalysis (EPMA). Substituted Sr-hexaferrites in the system Sr-La-Co-Fe-O do not follow the 1:1 substitution mechanism of La/Co in M-type ferrites. Due to the presence and limited Co²⁺-incorporation Fe³⁺-ions are reduced to Fe²⁺ within the crystal lattice to obtain charge balance. In all examined M-type ferrites divalent iron is formed, even at 1200 °C. The substitution principle Sr²⁺+Fe³⁺↔La³⁺+(Fe²⁺, Co²⁺) yields to the general substitution formula for the M-type hexaferrite Sr²⁺_1-xLa³⁺_xFe²⁺_x-yCo²⁺_yFe³⁺_12-xO¹⁹ (0≤x≤1 and 0≤y≤x). In addition Sr/La-perovskite_SS (_SS=solid solution), Co/Fe-spinel_SS, hematite and magnetite are formed. Sr-hexaferrite exhibits at 1200 °C a limited solid solution with small amounts of Fe²⁺ (SrFe₁₂O₁₉↔Sr_0.3La_0.7Co_0.5Fe²⁺_0.2Fe_11.3O₁₉). At 1300 and 1380 °C a continuous solid solution series of the M-type hexaferrite is stable. SrFe₁₂O₁₉ and LaCo_0.4Fe²⁺_0.6Fe₁₁O₁₉ are the end members at 1300 °C. The maximum Fe²⁺O content is about 13 mol% in the M-type ferrite at 1380 °C (LaCo_0.1Fe²⁺_0.9Fe₁₁O₁₉).     

Water‐Splitting Electrocatalysis in Acid Conditions Using Ruthenate‐Iridate Pyrochlores

The pyrochlore solid solution (Na_0.33Ce_0.67)₂(Ir_1?xRu_x)₂O₇ (0≤x≤1), containing B‐site Ru^IV and Ir^IV is prepared by hydrothermal synthesis and used as a catalyst layer for electrochemical oxygen evolution from water at pH<7. The materials have atomically mixed Ru and Ir and their nanocrystalline form allows effective fabrication of electrode coatings with improved charge densities over a typical (Ru,Ir)O₂ catalyst. An in situ study of the catalyst layers using XANES spectroscopy at the Ir L_III and Ru K edges shows that both Ru and Ir participate in redox chemistry at oxygen evolution conditions and that Ru is more active than Ir, being oxidized by almost one oxidation state at maximum applied potential, with no evidence for ruthenate or iridate in +6 or higher oxidation states.     

Beiträge zu den Eigenschaften von Titanaten mit Ilmenitstruktur. II. Zur Thermodynamik und elektrischen Leitfähigkeit von NiTiO3 und anderen oxidischen Phasen mit Ilmenitstruktur

Contributions to the Properties of Titanates with Ilmenite Structure. II. Study on the Thermodynamics and the Electrical Conductivity of NiTiO₃ and Other Phases with Ilmenite Structure NiTiO₃ shows a phase transition at high temperatures (T_c = 1290°C). The standard enthalpy and entrop of the reaction NiO + TiO₂ = NiTiO₃ was estimated for temperatures above and below the transition temperature using emf-measurements based on the following solid state galvanic cell: Ni,TiO₂, NiTiO₃|ZrO₂(+CaO)|Ni,NiO. The transition enthalpy was found to be 18 ± 2 kJmol^?1, The transition entropy is 12 ± 1 JK^?1mol^?1. This is in good agreement with the calculated entropy change for an order-disorder transition (11.5 JK^?1mol^?1). The influence of other cations like Mg²⁺ and Co²⁺ on the transition temperature was investigated by measurements of the electrical conductivity as a function of composition. Ni_1?xMg_xTiO₃ shows a strong shift of the transition to higher temperatures if a small part of the Ni²⁺ was replaced by Mg²⁺. A linear correlation between the temperature shift and the amount of Co²⁺ was found for Ni_1?xCo_xTiO₃. Thermoanalytical investigations reveal an endothermic peak during the heating period some degrees below the melting point of CoTiO₃. The substitution of Ge⁴⁺ for Ti⁴⁺ is without any influence on the transition temperature. By doping the NiTiO₃ with Ga₂O₃, the anomalous increase of the electrical conductivity with temperature is shifted to lower temperatures.     

A Flame‐Reaction Method for the Large‐Scale Synthesis of High‐Performance SmxCoy Nanomagnets

We report a flame‐reaction method to synthesize high‐performance Sm_xCo_y (x=1, y=5; x=2, y=17) particles on a multigram scale. This flame reaction allows the controlled decomposition of Sm(NO₃)₃ and Co(NO₃)₂ to 320 nm SmCo‐O (SmCoO₃ + Co₃O₄) particles. A 5.8 g sample of SmCo_3.8‐O particles was coated with CaO and then reduced at 900 °C by Ca to give 4.2 g of 260 nm SmCo₅ particles. The SmCo₅ particles are strongly ferromagnetic and the aligned particles in epoxy resin exhibit a large room‐temperature coercivity (H_c) of 41.8 kOe and giant (BH)_max (maximum magnetic energy product) of 19.6 MGOe, the highest value ever reported for SmCo₅ made by chemical methods. This synthesis can be extended to synthesize Sm₂Co₁₇ particles, providing a general approach to scaling up the synthesis of high‐performance Sm_xCo_y nanomagnets for permanent magnet applications.     

Enzyme mimics of spinel-type CoxNi1−xFe2O4 magnetic nanomaterial for eletroctrocatalytic oxidation of hydrogen peroxide

A series of spinel-type Co_xNi_1−xFe₂O₄ (x = 0, 0.2, 0.4, 0.5, 0.6, 0.8, 1.0) magnetic nanomaterials were solvothermally synthesized as enzyme mimics for the eletroctrocatalytic oxidation of H₂O₂. X-ray diffraction and scanning electron microscope were employed to characterize the composition, structure and morphology of the material. The electrochemical properties of spinel-type Co_xNi_1−xFe₂O₄ with different (Co/Ni) molar ratio toward H₂O₂ oxidation were investigated, and the results demonstrated that Co_0.5Ni_0.5Fe₂O₄ modified carbon paste electrode (Co_0.5Ni_0.5Fe₂O₄/CPE) possessed the best electrocatalytic activity for H₂O₂ oxidation. Under optimum conditions, the calibration curve for H₂O₂ determination on Co_0.5Ni_0.5Fe₂O₄/CPE was linear in a wide range of 1.0 × 10⁻⁸–1.0 × 10⁻³ M with low detection limit of 3.0 × 10⁻⁹ M (S/N = 3). The proposed Co_0.5Ni_0.5Fe₂O₄/CPE was also applied to the determination of H₂O₂ in commercial toothpastes with satisfactory results, indicating that Co_xNi_1−xFe₂O₄ is a promising hydrogen peroxidase mimics for the detection of H₂O₂.     

Effect of metal substitution for cobalt on the oxygen adsorption properties of YBaCo<Subscript>4</Subscript>O<Subscript>7</Subscript>

YBaCo₄O₇ compound is capable to intake and release a large amount of oxygen in the temperature range of 200–400°C. In the present study, the effect of Zn, Ga and Fe substitution for Co on the oxygen adsorption/desorption properties of YBaCo₄O₇ were investigated by thermogravimetry (TG) method. Due to fixed oxidation state of Zn2+ ions, the substitution of Zn²⁺ for Co²⁺ suppresses the oxygen adsorption of YBaCo_4−xZn_xO₇. The substitution of Ga³⁺ for Co³⁺ also decreases the oxygen absorption capacity of YBaCo_4−xGa_xO₇. This can be explained by the strong affinity of Ga³⁺ ions towards the GaO₄ tetrahedron. Compared with Zn- and Ga-substituted samples, the drop of oxygen adsorption capacity is smallest for Fe-substituted samples because of the similar changeability of oxidation states of Co and Fe ions.