Reaction gas chromatography: Study of the photodecomposition of halogenated hydrocarbons

Summary Photodecomposition of chloro- and bromoderivatives of saturated, unsaturated and aromatic hydrocarbons has been studied under flow conditions using reaction gas chromatography. The photodegradation products were separated on a column coated with squalane and identified by comparing the measured retention data with those of standards and published retention indices, The results can be used to clarify the decomposition of such compounds.     

Halogenated compound response in an oxygen doped ion mobility detector for capillary gas chromatography

An ion mobility detector that has been specifically developed for interfacing with capillary gas chromatography is investigated in the negative ion mode. Like the electron capture detector, to which this instrument is closely related, the ion mobility detector shows an enhanced response to low molecular weight halogenated compounds when a small quantity of oxygen is doped into the make-up gas flow. Under O₂ doping conditions, the device can operate in a reactant ion monitoring mode responding universally to compounds capable of capturing thermal electrons and in a tunable selective product ion mode providing increased selectivity over that achieved by the ECD. At an oxygen concentration of 0.5%, minimum detectable amounts as low as 600 femtograms have been realized for carbon tetrachloride. Selectivity of chloro- versus bromo- compounds is demonstrated using a mixture of p-dichlorobenzene and p-dibromobenzene.     

Comprehensive two-dimensional gas chromatography: a powerful and versatile analytical tool

Comprehensive two-dimensional gas chromatography (GC×GC) is a novel technique which is rapidly gaining importance for the analysis of complex samples. In the present review, attention is devoted to the principle and advantages, and main characteristics such as modulation, column combinations, detector requirements and data processing, of the technique. Specifically, GC×GC of a variety of real-life samples is discussed to demonstrate the applicability of the technique, with emphasis on the usefulness of the ordered-structure principle and on the analyte-identification power provided by a combination with time-of-flight mass spectrometric detection.     

Method for analysis of heavy sulphur compounds using gas chromatography with flame photometric detection

A method for analysis of heavy sulphur compounds in wines, based on gas chromatography (GC) with flame photometric detection, is reported. Wine samples preparation includes a dichloromethane liquid-liquid extraction followed by concentration under a nitrogen atmosphere. The extracted fraction was also analysed by GC-mass spectrometry. The method enables high recovery of sulphur compounds in wine and satisfies the requirements of repeatability and sensitivity. Applications of the method to red, white and Port wines are reported.     

Determination of volatile halogenated organic compounds in soils by purge-and-trap capillary gas chromatography with atomic emission detection

Nine volatile halogenated organic compounds (VHOCs), including four trihalomethanes (THMs), were determined in soils by capillary gas chromatography with microwave induced-plasma atomic emission spectrometry (GC-AED), using a purge-and-trap system (PT) for sample preconcentration. Analytes were previously extracted from the soil sample in methanol and the extract was preconcentrated before being chromatographed. Element-specific detection and quantification were carried out monitoring two wavelength emission lines, corresponding to chlorine (479 nm) and bromine (478 nm). Each chromatographic run took 21 min, including the purge step. The method showed a precision of 1.1-7.2% (R.S.D.) depending on the compound. Detection limits ranged from 0.05 to 0.55 ng ml⁻¹, for chloroform and dichloromethane, respectively, corresponding to 3.3 and 36.0 ng g⁻¹ in the soil samples. The chromatographic profiles obtained showed no interference from co-extracted compounds. Low levels of dichloromethane and chloroform ranging from 0.04 to 1.13 μg g⁻¹ were found in samples obtained from small gardens irrigated with tap water. The method is reliable and can be used for routine monitoring in soil samples.     

Trace analysis of volatile halogenated hydrocarbons in water

Summary Simple sampling and preconcentration technique for the analysis of volatile halogenated hydrocarbons in water is described. For the separation a selective capillary column is used in combination with an ECD. Quantitative data are given.     

自动顶空固相微萃取气相色谱法同步分析水中17种有机物

采用自动顶空固相微萃取(HS-SPME)技术与气相色谱联用同步分析水中1,4-二氯苯、1,2-二氯苯、1,3,5-三氯苯、1,2,4-三氯苯、1,2,3-三氯苯、六氯苯、硝基苯、对硝基甲苯、α-666、β-666、γ-666、δ-666、七氯、ρ,ρ′-DDE、ρ,ρ′-DDD、o,ρ′-DDT、ρ,ρ′-DDT17种有机物。方法的最低检出浓度为0.001~0.044μg/L,线性相关系数均大于0.999,相对标准偏差为1.4%~8.7%,加标回收率在81.3%~122.9%之间。     

Two-dimensional gas chromatography for determination of volatile compounds in ambient air

A two-dimensional gas chromatograph is described for the analysis of volatile compounds. The chromatographic system consists of two separate chromatographs linked together with an interface containing an intermediate trap. The trap is cooled with nitrogen (?150°C) and a cryogradient is created inside the trap enclosure. The sample is reinjected during controlled (chromatographic) conditions, using thermostated air. The sample components are eluted from the trap as narrow symmetrical peaks; the shape and width of the peaks eluted do not noticeably affect the subsequent chromatography. The enrichment of n-butane in the trap is quantitative in the range 10^?10 – 10^?5 g.     

Retention time locking procedure for comprehensive two-dimensional gas chromatography

In gas chromatography (GC) reproducible retention times are in many cases highly favorable or in some cases even required. In one-dimensional GC, retention time shifts can be eliminated or minimized using a procedure called retention time locking (RTL). This procedure is based on adjusting the (constant) column head pressure. Unfortunately, this RTL procedure cannot be used in comprehensive two-dimensional gas chromatography (GC × GC) given the fact that peaks will shift in both dimensions. Adjusting the column head pressure in GC × GC will only minimize or eliminate the primary retention time shifts. In this paper, a fast and easy to perform, two-step retention time locking procedure for two-dimensional gas chromatography (2D-RTL) is proposed and its feasibility is demonstrated. This 2D-RTL procedure involves adjustment of the column head pressure or constant column flow, followed by the adjustment of the so-called effective secondary column length. The secondary column length is increased or decreased, simply by moving it stepwise through the modulator. It is demonstrated that retention time shifts in both the primary- and secondary-dimension, which may occur after e.g. replacing the column set, can be minimized to less than half peak base width. The proposed 2D-RTL procedure is used successfully for approximately 1 year in our laboratory.     

制备气相色谱在挥发性成分分离中的应用研究进展北大核心CSCD

分析型气相色谱仪对低沸点易挥发的有机化合物展现出优异的分离性能,通过在其色谱柱末端加装馏分收集装置,建立了现代制备气相色谱(Prep GC)技术,该技术可用于挥发性成分的快速分离富集。制备气相色谱仪是由分析型气相色谱仪改装而来,其进样系统、分离系统、检测系统、馏分收集系统也在不断地优化升级,以提高目标化合物的回收效率和纯度。Prep GC与现代波谱技术(如紫外可见吸收光谱、红外吸收光谱、拉曼光谱、质谱、X射线衍射、核磁共振波谱)耦合,可对分离富集得到的目标化合物的结构进行精准确证。近年来,与Prep GC在各种挥发性成分分离中的应用相关的报道逐渐增多,展现出良好的应用前景。然而,Prep GC在分离过程中也存在着无法制备热敏性化合物、分离成本高、易引入外源性污染等问题。该文根据近年来国内外研究学者的相关研究工作,对制备气相色谱仪的结构及其在精油单体化合物、昆虫信息素、食品和植物挥发性成分、地质生物标志物及持久性环境污染物的分离等领域的应用研究进展进行综述。最后,还对Prep GC在挥发性成分分离中的应用进行了总结与展望,旨在为拓展Prep GC应用领域提供参考。     

Optimization of dispersive liquid-liquid microextraction combined with gas chromatography for the analysis of nitroaromatic compounds in water

Dispersive liquid-liquid microextraction (DLLME) coupled with gas chromatography-flame ionization detector (GC-FID) was developed for preconcentration and determination of some nitroaromatic compounds in wastewater samples. The effects of different variables on the extraction efficiency were studied simultaneously using experimental design. The variables of interest in the DLLME process were extraction and disperser solvent volumes, salt effect, sample volume, extraction temperature and extraction time. A Plackett-Burman design was performed for screening of variables in order to determine the significant variables affecting the extraction efficiency. Then, the significant factors were optimized by using a central composite design (CCD) and the response surface equations were derived. The optimum experimental conditions found from this statistical evaluation included: sample volume, 9 mL; extraction solvent (CCl₄) volume, 20 μL; disperser solvent (methanol) volume, 0.75 mL; sodium chloride concentration, 3% (w/v); extraction temperature, 20 °C and extraction time, 2 min. Under the optimum conditions, the preconcentration factors were between 202 and 314. Limit of detections (LODs) ranged from 0.09 μg L⁻¹ (for 2-nitrotoluene) to 0.5 μg L⁻¹ (for 2,4-dinitrotoluene). Linear dynamic ranges (LDRs) of 0.5-300 and 1-400 μg L⁻¹ were obtained for mononitrotoluenes (MNTs) and dinitrotoluenes (DNTs), respectively. Performance of the present method was evaluated for extraction and determination of nitroaromatic compounds in wastewater samples in the range of microgram per liter and satisfactory results were obtained (RSDs < 10.1%).     

Determination of gaseous carbonyl compounds by their pentafluorophenyl hydrazones with gas chromatography/mass spectrometry

A sensitive and reliable method has been developed for the simultaneous determination of 20 airborne carbonyl compounds in the C₁-C₁₀ range. The carbonyls were collected onto solid sorbent coated with pentafluorophenyl hydrazine (PFPH), followed by solvent extraction and gas chromatographic (GC)/mass spectrometric (MS) analysis of the PFPH derivatives. The sorbent is packed into two separate sections in a glass sampling tube. The two-section design allows convenient checking of collection efficiency and breakthrough. The sampling tube, with a coating amount of 971 nmol PFPH per 100 mg Tenax TA and operated at a sampling flow rate of 80 mL min⁻¹, collects the 20 carbonyls with efficiencies above 95%. Hexane extracts the collected carbonyls in their PFPH derivatives in the sampling tube with better than 95% extraction efficiency. It is necessary to let the sampling tube sit at ambient temperature for 3 days before solvent extraction to ensure complete derivatization of the carbonyls. The limits of detection (LODs) of the tested carbonyls are in the range of 3.7-11.6 ng per sample. The method has been field-tested both in ambient environment and in an indoor environment from burning mosquito-repellent incense. Eighteen carbonyls were detected in the ambient air samples with the exception of o-tolualdehyde and m-tolualdehyde, while all the 20 target carbonyls were found in the incense smoke. Compare field test with classical DNPH-HPLC/UV method, good agreement exited between the two methods for lower molecular carbonyls but PFPH method is found to be a better analytical method for determination of high molecular weight carbonyls.     

Sample preparation for gas chromatographic determination of halogenated volatile organic compounds in environmental and biological samples

In this review, the wide spectrum of the techniques of isolation and/or preconcentration and final determination of halogenated volatile organic compounds (HVOCs) in water, air, soil, sediment and biological fluids are presented and discussed. The techniques discussed are solvent microextraction, solid phase extraction, gas extraction (static and dynamic techniques), membrane processes and passive sampling. Also, direct techniques, such as direct aqueous injection into gas chromatography (GC) column and membrane inlet mass spectrometry, are presented. Main attention is paid to the practical application of these techniques during all HVOCs determination.     

Elemental composition determination of organophosphorus compounds using gas chromatography and atomic emission spectrometric detection

The elemental responses for a series of alkylated and arylated phosphates evaluated were measured on an atomic emission spectrometric detector. The signals for carbon, hydrogen, chlorine, phosphorus and oxygen were used to determine the specifity of elemental response ratios to a particular compound structure and the dependence of response ratios on the amounts of the analytes. Variations of the response ratios, as well as the accuracy and variations of the stoichiometric values of the calculated empirical formulae, were evaluated. For this purpose, a test mixture with reference compounds was used. Determination of empirical formulae with acceptable errors of a few percent is possible if the calibrating reference substance is closely related — by structure, elemental composition, molecular weight and amount — to the compounds to be identified. Analyte amounts of at least 30 ng are required for efficient calibration.     

Selectivity comparisons of monolithic silica capillary columns modified with poly(octadecyl methacrylate) and octadecyl moieties for halogenated compounds in reversed-phase liquid chromatography

Stationary phase selectivities for halogenated compounds in reversed-phase HPLC were compared using C18 monolithic silica capillary columns modified with poly(octadecyl methacrylate) (ODM) and octadecyl moieties (ODS). The preferential retention of halogenated benzenes on ODM was observed in methanol/water and acetonitrile/water mobile phases. In selectivity comparison of selected analytes on ODM and ODS, greater selectivities for halogenated compounds were obtained with respect to alkylbenzenes on an ODM column, while similar selectivities were observed with a homologous series of alkylbenzenes on ODM and ODS columns. These data can be explained by greater dispersive interactions by more densely packed octadecyl groups on the ODM polymer coated column together with the contribution of carbonyl groups in ODM side chains. For the positional isomeric separation of dihalogenated benzenes (ortho-, meta-, para-), the ODM column also provided better separation of these isomers for the adjacently eluted isomers that cannot be completely separated on an ODS column in the same mobile phase. These results imply that the ODM column can be used as a better alternative to the ODS column for the separation of other halogenated compounds.     

Impact of gas chromatography and mass spectrometry combined with gas chromatography and olfactometry for the sex differentiation of Baccharis articulata by the analysis of volatile compounds

The Baccharis genus has more than 400 species of aromatic plants. However, only approximately 50 species have been studied in oil composition to date. From these studies, very few take into consideration differences between male and female plants, which is a significant and distinctive factor in Baccharis in the Asteraceae family. Baccharis articulata is a common shrub that grows wild in south Brazil, northern and central Argentina, Bolivia, Paraguay and Uruguay. It is considered to be a medicinal plant and is employed in traditional medicine. We report B. articulata male and female volatile composition obtained by simultaneous distillation–extraction technique and analyzed by gas chromatography with mass spectrometry. Also, an assessment of aromatic differences between volatile extracts was evaluated by gas chromatography with olfactometry. The results show a very similar chemical composition between male and female extracts, with a high proportion of terpene compounds of which β‐pinene, limonene and germacrene D are the main components. Despite the chemical similarity, great differences in aromatic profile were found: male plant samples exhibited the strongest odorants in number and intensity of aromatic attributes. These differences explain field observations which indicate differences between male and female flower aroma, and might be of ecological significance in the attraction of pollinating insects.     

Quantitative gas chromatographic analysis of perhalogenated compounds using a flame lonization detector

Summary In the determination of several perhalogenated compounds after gas chromatographic separation on an Apiezon L column, using a flame ionization detector, all the compounds tested gave linear area-mass plots although the coefficients observed do not lead to extrapolations which would permit quantitation of perhalogenated compounds for which no standard is available. Of the compounds tested, dibromodichloromethane, tetrachloroethene and tetrabromoethene gave good linear correlations of area ratio-mass ratio (using n-decane as the internal standard). Bromotrichloromethane and tetrabromomethane gave continuously curving area ratio-mass ratio plots which were very reproducible and could be used for graphical interpolation.     

Radiation induced decomposition of halogenated organic compounds in water

Decomposition by ionizing radiations of p-chlorophenol and tetrachloroethylene in synthetic water samples at about 2 mg Cl L⁻¹, has been studied on laboratory-scale experiments. Bicarbonate/carbonate and nitrate ions, at two concentration levels (20 and 200 mg HCO₃⁻¹ and 1 and 50 mg NO₃⁻L⁻) were added to synthetic samples in order to evaluate their influence on decomposition yield. At 5 kGy γ dose level, a quantitative degradation of p-chlorophenol is obtained whereas only qualitative consideration can be drawn on tetracholoroethylene. Comparative study with respect to degradation of p-cholophenol solutions (about 2 mg Cl L⁻¹) by γ-rays and electron beam irradiation treatment at 0.5 kGy dose level, are in progress; preliminary results indicate that irradiation with γ-rays seems to be more efficient in terms of removal efficiency respect to electron beams source.     

国内气相色谱近年的进展

本文对近三年国内学者在气相色谱方面的研究和应用作了综述 ,国内学者的研究基本和国际上气相色谱方面的研究类似 ,在全二维气相色谱、快速气相色谱 ,微型气相色谱仪、新型气相色谱固定相和色谱柱的溶胶 凝胶涂渍技术领域的研究方面作出了贡献。有关气相色谱的应用研究中 ,介绍了大量在药物分析、食品分析、环境分析、石油和石化分析和化工产品及高聚物分析等领域中应用的题目和摘要