Magnetic nanoparticles: Internal probes and heaters within living cells

Tagging living cells with magnetic nanoparticles raised increasing interest in the fields of magnetic resonance imaging, magnetic hyperthermia, cell sorting or tissue engineering. Here, we demonstrate that the confinement of magnetic nanoparticles at the intracellular level, inside endosomes vesicles, allows developing original magnetic manipulations in response to different magnetic field solicitations. These manipulations are used to deform cellular internal membrane, to probe the cell architecture or to heat the cell from its inside.     

Synthesis of immunomagnetic nanoparticles and their application in the separation and purification of CD34 hematopoietic stem cells

The silica-coated superparamagnetic nanoparticles with the uniform diameter of about 60 nm were synthesized by reverse microemulsions method. And the magnetic nanoparticles were modified with N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (AEAPS). The immunomagnetic nanoparticles were then successfully prepared by covalently immobilizing anti-CD34⁺ monoclonal antibodies to the surface of amino silane modified magnetic particles. The cell separation results showed that the synthesized immunomagnetic nanoparticles could rapidly and conveniently separate the CD34⁺ cells with high efficiency and specificity than normal ones. The surface morphology of separated target cells was examined by scanning electron microscope (SEM). Atomic force microscope (AFM) also characterized the magnetic materials on the surface of the separated target cells for the first time, which further confirmed that the target cells were separated by the immunomagnetic nanoparticles. The viability of the separated cells was studied by culturing method and Beckman Vi-cell viability analyst. Therefore, our experiments provided a new, direct, rapid mode to separate target cells.     

Labelling of cultured macrophages with novel magnetic nanoparticles

Magnetic resonance (MR) imaging is capable of demonstrating human anatomy and pathological conditions. Iron oxide magnetic nanoparticles (MNPs) have been used in MR imaging as liver-specific contrast medium, cellular and molecular imaging probes. Because few studies focused on the MNPs other than iron oxides, we developed FeNi alloy MNPs coated with polyethylenimine (PEI). In this study, we demonstrated PEI-coated FeNi MNPs are able to label the cells, which could be detected in MR imaging. For labelling purpose, MNPs were incubated with mouse macrophage cell line (Raw 264.7) for 24 h and these PEI-labelled FeNi alloy MNPs can be uptaken by macrophages efficiently compared with Ferucarbotran, a commercialized superparamagnetic iron oxide (SPIO) under flow cytometry measurement. Besides, these cells labelled with MNPs could be imaged in MR with the identical potency as Ferucarbotran. Further investigation of the cells using Prussian blue staining revealed that FeNi alloy MNPs inside the cells is not oxidized. This phenomenon alleviated the consideration of potential risk of nickel toxicity. We conclude that PEI-coated FeNi MNPs could be candidate for MR contrast medium.     

Optical trap with spatially varying polarization: application in controlled orientation of birefringent microscopic particle(s)

We report the use of the interference of two orthogonally polarized beams for generation of an optical trap with spatially varying polarization. The spatial variation of polarization in the optical trap has been used for demonstration of simultaneous rotation or orientation of multiple microscopic birefringent particles. Other potential applications of an optical trap with spatially varying polarization are also discussed.This revised version was published online in August 2005 with a corrected cover date.     

Independency of Fe ions in hemoglobin on immunomagnetic reduction assay

Immunomagnetic reduction (IMR), which involves measuring the reduction in the ac magnetic susceptibility of magnetic reagents, is due to the association between bio-functionalized magnetic nanoparticles and target bio-molecules. This has been demonstrated for assaying proteins in solutions free of Fe ions, such as serum. In this work, the validity of IMR assay for samples rich in Fe ions like hemoglobin (Hb) is investigated. According to the results, there is no magnetic signal contributed by Fe-ion-rich Hb. Furthermore, the results show a high sensitivity in assaying hemoglobin A1c (HbA1c) by using IMR.     

Axial deviation of an optically trapped particle in trapping force calibration using the drag force method

The axial deviation of the trapped particle in the lateral trap stiffness calibration and the maximal trapping force measurement has been reported, but has not yet been extensively analyzed in the literature. Due to the importance of the trapping force calibration in the applications, the axial deviation and the influence on the trap stiffness and the maximal trapping force measurement is analyzed both experimentally and theoretically. First, the trap stiffness calibration experiment is rechecked and more attention is paid to the axial displacement of the particle. The result confirms that the equilibrium position of the particle moves upward with the increase of the lateral displacement. In order to get better understanding of the phenomenon, the relation between the axial displacement and the lateral displacement is theoretically calculated by using the ray optics model. The comparison of the calculated result with the experimental one indicates that the particle equilibriums are not in the horizontal plane passing through the trap center, but are on a curved track where the external force is balanced with the trapping force. Then the relations between the trapping efficiency and the lateral displacement are derived, which shows that the experimentally calibrated trap stiffness is a reasonable approximation so long as the particle is kept in the central part of the trap. Finally, the difference between the maximal lateral trapping force and the escape force is discussed, and it is shown that the measured escape force is not as supposed to be the maximal lateral trapping force but far less than it.     

Generation of optical vortices with arbitrary shape and array via helical phase spatial filtering

We report a method for generation of arbitrary shape and array of optical vortices by use of a superposition of coherent elementary vortices based on helical phase spatial filtering in spatial frequency domain. In this method, a helical phase spatial filter (HPSF) is placed in the spatial frequency plane of a 4-f imaging processing system. We demonstrated that the output field distribution represents the convolution between the input field and an elementary vortex field introduced by the HPSF, which results in a special shape or array of optical vortices determined by the “degenerate” properties of coherent elementary vortices and the distribution formats of the input field.     

Fabrication of L10 FePtAg nanoparticles and a study of the effect of Ag during the annealing process

L1₀ ferromagnetic phase FePt nanoparticles containing Ag atoms (FePtAg) were synthesized by means of a liquid phase process, followed by annealing. The addition of Ag to FePt nanoparticles permits annealing to be conducted at a lower temperature (350 °C). This is further accompanied by a subsequent transformation in the crystal phase from the FCC superparamagnetic phase to the FCT (L1₀) ferromagnetic phase. The effects of annealing temperature and the Ag atoms inside the nanoparticles on the magnetic properties of the FePt nanoparticles have been studied. Using electron spectroscopy for the chemical analysis (ESCA), Ag atoms in the L1₀ phase FePtAg nanoparticles were found to be localized on the surface region of the annealed nanoparticles. The Ag atoms function to inhibit the oxidation of FePt, causing the particles to become more stable and to have ferromagnetic properties.     

Adhesion and endothelialization of endothelial cells on the surface of endovascular stents by the novel rotational culture of cells

Recent researches indicate that the initial event in the implantation of endovascular stents involves mechanical injury to the vessel wall. Confluent endothelialization of vascular grafts in vitro before implantation has been suggested as a way to reduce injury of the blood vessel. The purpose of this study is to establish a useful way to improve the adhesion of endothelial cells and accelerate endothelialization on the surface of endovascular stents by a novel rotational culture device. Numerical simulation was used to predict the shear stress on the surface of stents. The number of cellular adhesion was calculated by cell counting, the cell growth was observed by scanning electron microscope and fluorescence microscope. Numerical simulation results showed that the stents was exposed to shear stress of 2.66 × 10⁻³ to 8.88 × 10⁻² Pa. Rotational culture of human umbilical vein endothelial cells could enhance the adhesion of cells and accelerate endothelialization on the surface of stents when the culture conditions for EC adhesion were intermediate rotation speed, higher dynamic incubation times, lower cell densities.     

Synthesis and properties of magnetic fluid based on iron nanoparticles prepared by a vapor-phase condensation process

Magnetic fluid containing metallic iron nanoparticles was successfully fabricated in this work. The iron nanoparticles were synthesized by chemical vapor condensation process and then dispersed in water-base solution (pH 11) with oleic acid as surfactant. More than 80% of iron nanoparticles were fully dispersed in the fluid and remained stable without any further oxidation over 200 h. Both the iron nanoparticles and the subsequent magnetic fluid exhibited typical ferromagnetic behavior.     

Gas flow sputtering: Versatile process for the growth of nanopillars, nanoparticles, and epitaxial thin films

Gas flow sputtering is a sputter-deposition method that enables soft and high-rate deposition even for oxides or nitrides. It involves sputtering at a high pressure of around 100 Pa and hollow cathode discharge in a tubular or parallel plate target with forced Ar flow. Depending on the sputtering conditions, various structures of magnetic materials are obtained, and some examples are shown in this paper. Co-Pt and Fe nanopillars are fabricated using a tubular target with a large inner diameter (6-40 mm). Fe nanoparticles with diameters ranging from a few nanometers to 150 nm are fabricated using a tubular target with a small inner diameter (5 mm). Magnetite epitaxial thin films are fabricated on MgO and GaAs substrates by substrate heating.     

Biological tissue magnetism in the frame of iron overload diseases

The conspicuous magnetic properties of iron, paradoxically, rarely participate in the methods routinely employed in the clinical environment to detect iron containing species in tissues. In the organism iron is just a trace metal and it mostly occurs as part of haemoproteins or ferritin, which show paramagnetic, diamagnetic or antiferromagnetic behaviour, hence resulting in a very low contribution to the tissue susceptibility. Detailed magnetic measurements make it nowadays possible to identify such species in tissues that correspond to individuals with iron overload pathologies. Since, as alternatives to the conventional biopsy, magnetism-based noninvasive techniques to diagnose and manage such diseases are recently under development, the deep knowledge of the magnetic properties of the different forms of iron in tissues is of high applied interest.     

Force-feedback joystick as a low-cost haptic interface for an atomic-force-microscopy nanomanipulator

In order to manipulate materials at the nanometer scale, new methods and devices have to be developed. A nanomanipulator interface was designed and implemented in a commercial atomic-force-microscope (AFM) system. With the aid of a positioning joystick, direct positioning of the AFM probe with nanometer precision was possible. A commercial force-feedback joystick served as a haptic interface and provided the user with real-time feeling of the tip–sample interactions. Due to the open design, the manipulator interface could be used with other microscopes of the SPM family. In addition, the nanomanipulator and an UV-laser microbeam for photoablation were combined on an inverted optical microscope. To test the nanomanipulator, human metaphase chromosomes were dissected using both photoablation and mechanical AFM manipulation. The experimental results show that by combining both methods, biological material can be manipulated on different size scales in one integrated instrument. The effects of manipulation on the chromosome were studied in detail by AFM. Sub-400 nm cuts were achieved by photonic ablation. Chromosomal fragments of a size less than of 500 nm could be isolated. By means of mechanical microdissection, different cut sizes ranging from 80 nm to 500 nm could be easily obtained by applying different load forces. Received: 2 September 2002 / Accepted: 2 September 2002 / Published online: 5 March 2003 RID="*" ID="*"Current affiliation: Nanotechnology Group, ETH Zurich, Switzerland RID="**" ID="**"Corresponding author. Fax: +49-89/2180-4331, E-mail: heckl@lmu.de     

Magnetic-field-induced transition from metastable spin glass to possible antiferromagnetic-ferromagnetic phase separation in Cd0.5Cu0.5Cr2O4

Using ac susceptibility, dc magnetization and heat-capacity measurements, we have investigated the magnetic properties of Cd_0.5Cu_0.5Cr₂O₄. Cd_0.5Cu_0.5Cr₂O₄ has an extraordinary magnetic phase including a metastable spin-glass (SG) phase at zero field, a possible phase separation scenario of AFM/FM above ∼0.5 T field, and at intermediate fields, an apparent pseudo reentrant spin-glass (RSG) plateau is observed. These phenomena are closely correlated with the pinning effect of the Cu²⁺ sublattice on the frustrated lattice.     

Some dynamical aspects of the fission process

The properties of the nuclear mass parameter and its influence on the fission process are discussed. In particular, correlations between dynamical and statical paths to fission are considered. The least action trajectories idea is used for finding the dynamical path to fission. Ritz method for the action integral minimalization is applied. An example of the nucleus ²⁵²Fm is considered.     

Influence of shearing process on domain structure and magnetic properties of non-oriented electrical steel

The influence of shearing on the magnetic properties and domain structure of 0.5 mm thick non-oriented electrical steel was studied. In the region from 1 to 1.4 mm from the sheared edge, a striped domain pattern that indicated the existence of elastic strain was observed. From the degradation tendency of flux density with respect to shearing width, the width of the degraded region near the edge increased as the magnetic field decreased. These results suggested that the change in the flux density at high magnetic fields over 300 A/m were mainly dependent on the characteristics of the edge vicinity where the domain pattern was influenced by shearing.     

Grain growth process of two-phase nanocrystalline soft magnetic materials

In order to clarify the origin of the high thermal stability of the microstructure in bcc-Fe/amorphous two-phase nanocrystalline soft magnetic materials, we have investigated the changes in the magnetic and microstructural properties upon isothermal annealing at 898 K for an Fe₈₉Zr₇B₃Cu₁ alloy by means of transmission electron microscopy, Mössbauer spectroscopy and DC magnetometry. The mean grain size was found to remain almost unchanged at the early stage of annealing. However, rapid grain coarsening was evident at an annealing time of 7.2 ks where the intergranular amorphous phase begins to crystallize into Fe₂₃Zr₆. The grain growth process with a kinetic exponent of 1.6 is observed for the growth process beyond this annealing time, reflecting the disappearance of the intergranular amorphous phase. Our results confirm that the thermal stability of the bcc-Fe/amorphous two-phase nanocrystalline soft magnetic alloys is governed by the residual amorphous phase.     

Field effect on the dynamics of the Ising spin glass near the percolation threshold

The effect of a uniform field H on the dynamics of the Ising spin glass Fe_xZn_1-xF₂, x=0.25, is studied through Monte Carlo simulations. The correlation function data are consistent with the droplets picture, with a single scaling variable t/t_w, where t_w is the waiting time under H, activation over logarithmic energy barriers near the percolation threshold, x_p=0.24, and considerable change of the glassy phase for intermediate and high H.     

Some aspects of the design of sonochemical reactors

The magnitudes of collapse pressures and temperatures as well as the number of free radicals generated at the end of cavitation events are strongly dependent on the operating parameters of the equipment namely, intensity and frequency of irradiation along with the geometrical arrangement of the transducers and the liquid phase physicochemical properties, which affect the initial size of the nuclei and the nucleation process. In the present work, the effect of these parameters on the collapse pressure generated and the maximum size of the cavity during the cavitation phenomena have been studied using the bubble dynamics equation, which considers the compressibility of the medium and a single bubble in isolation. The different liquid phase properties considered include, liquid vapor pressure, viscosity, bulk liquid temperature, surface tension and nature of dissolved gases (polytropic constant of the gas). The theoretical predictions have been also compared with the experimental results observed in the literature qualitatively and some recommendations have been made for the selection of the operating parameters so as to achieve maximum benefits. The work presented here is novel in sense that no earlier studies have considered the compressibility of the liquid medium and tried to evaluate the effect of all the operating parameters on the cavitational activity.