Solvent Extraction of Vanadium with α-Benzoin Oxime

The solvent extraction of vanadium by a chloroform solution of α-benzoin oxime was investigated. The most favorable condition for the extraction has been found in the pH rang of 1.8 to 3.0 in sulfate or chloride buffer solutions, but with better extraction efficiency when sulfate was used. A solution of 2×10^?2 M α-benzoin oxime in chloroform was used, and 1×10^?4 to 2×10^?2 M vanadium(V) was extracted favorably in about 89% yield by a single extraction, and in about 97% yield by a double extraction. The effects of shaking time, concentration of α-benzoin oxime, and diverse ions have also been investigated. Vanadium(V) can be readily extracted without interference in the presence of copper(II), aluminum(III), iron(III), silver(I), zirconium(IV), and chromium(III).     

Pre-column chelation liquid chromatographic separation and determination of trace V,Cu, Co,Pd, Fe and Ni

Conditions for the separation by reversed-phase liquid chromatography (LC) of V(V), Cu(II), Co(III), Pd(II), Fe(III) and Ni(II) chelates with 2-(5-bromopyridylazo)-5-diethylaminophenol (5-Br-PADAP) were studied. Six species of metal chelates were separated successfully with methanol-acetonitrile-water (72:12:16, v/v/v) containing 0.13 M NaCl and 0.29 mM cetyltrimethylammonium bromide (pH 5.0) as the mobile phase on a Nucleosil C₁₈ (5 μm) column (250 × 4 mm i.d.).The conditions of the determination of these metal chelates are discussed. A simple and rapid method for the determination of trace amounts of V(V), Cu(II), Co(III), Pd(II) and Ni(II) simultaneously by reversed-phase LC has been developed. The detection limits are 5 × 10^?12, 1 × 10^?10, 3 × 10^?11, 5.3 × 10^?9 and 2 × 10^?10 g, respectively. The method is applied to the determination of these metals in natural waters and mineral samples.     

Spectrometric Studies on the Complexation of Pd(II), Fe(III) and Pt(IV) with mandelazo I

Abstract

A spectrometric study of the reaction between Pd(II), Fe(III) and Pt(IV) ions, and Mandelazo I was carried out. The optimum conditions favouring the formation of the complexes are extensively investigated. The stoichiometry of the complexes formed in solution (1:2, 1:1, 1:1), their apparent stability constants (5.45 × 10⁹, 2.39 × 10⁶, 4.12 × 10⁵) and the ranges for obedience to beer's law (0.2 – 6.4, 0.25 – 7.0, 1.5 – 42.0 μg/mL) are reported for Pd(II), Fe(III) and Pt(IV), respectively. The effect of some metal ions including Cu(II), Zn(II), Mn(II), Cd(II), Hg(II), Co(II), Ni(II), Be(II), Al(III), Th(IV) and U(VI), on the maximum absorbance of the formed complexes was also investigated.     

Determination of Methimazole and Carbimazole Using Polarography and Voltammetry

Abstract

Anodic waves of methimazole (I) (1-methylimidazole-2-thiol) and carbimazole (II) (1-ethoxycarbonyl-3-methyl-2-thio-4-imidazoline) on mercury electrodes correspond to mercury salt formation. Both compounds form in the thiono form a soluble complex at pH < 6, compound (I) at higher pH-values a slightly soluble salt of the thiol form. Electrode processes involving the thiol form are complicated by adsorption. Oxidation at solid electrodes occurs only at potentials more than 0.5 V more positive. For compound (I) spectrophotometry indicated pK_a=12.0 ± 0.2. By d.c. polarography in 0.1 M H₂SO₄ containing 10% ethanol the determination of both compounds is possible between 4 × 10^? and 1 × 10^?3 M, by differential pulse polarography between 1 × 10^? and 1 × 10^?4 M, by differential pulse voltammetry at HMDE between 5 × l0^?7 and 6 × 10^? M.     

Spectrophotometric Determination of Diphenadione Via its Metal Complexes

Abstract

Spectrophotometric procedure is described for the quantitative determination of diphenadione [2-(diphenylacetyl)-1,3-indandione], based on direct spectrophotometric measurements of the absorbances of its iron (III), iron (II) and cobalt (II), metal complexes at 488 nm, 505 nm and (334 nm, 372 nm), respectively. The drug reacts with metals in the ratio of 3:1 and 2:1 for iron (III) and for both iron (II) and cobalt (II) respectively. The obtained complexes have apparent molar absorptivities of 1.48 × 10³ 1 mol^?1 cm^?1, 0.714 × 10³ 1 mol^?1cm^?1 and (1.70 × 10³ 1 mol^?1cm^?1, 1.93 × 10³ 1 mol^?1cm^?1) for iron (III), iron (II) and cobalt (II) complexes, respectively. The procedure is suggested for the determination of 51–400 μg.ml^?1 diphenadione via the iron (II) complex and 35–170 μg.ml^?1 diphenadione via both cobalt (II) and iron (III) complexes. The suggested procedure has accuracies of 99.79 ± 0.67%, 99.64 ± 0.37% and (100.09 ± 0.53%, 99.99 ± 0.42%) for the metal complexes of iron (III), iron (II) and cobalt (II), respectively.     

Polarographic reduction of 2,4,6-trinitrobenzene-1-sulphonic acid and some 2,4,6-trinitrophenyl-amino acid derivatives

The rapid d.c. polarography of 2,4,6-trinitrobenzene-1-sulphonic acid and its derivatives with serine (I), threonine (II), glycine (III) and histidine (IV) revealed a 3-wave reduction and a marked pH dependence of the reduction potential. The polarographic waves of the derivatives (2.5 × 10^?4 M) showed appreciable changes when sulphite ions were present, with the development of a new wave at more negative potential in ?0.01 M sulphite solutions at pH 7.0. The E_1/2 values of these waves in pH 7.0 supporting electrolyte were: (I) ?1000; (II) ?1007; (III) ?1021; (IV) ?949 mV (vs. Ag/AgCl, sat. KCl). These waves were used to determine the amino acids investigated (1–4 × 10^?4 M) in the presence of excess of 2,4,6-trinitrobenzene-1-sulphonic acid, with good precision (2%).     

Synergistic extraction and spectrophotometric determination of palladium(II), iron(III), and tellurium(IV) at trace level by newly synthesized p-[4-(3,5-dimethylisoxazolyl)azophenylazo]calix(4)arene

A spectrophotometric method for the determination of palladium, iron and tellurium from nitric acid media after extraction of their p-[4-(3,5-dimethylisoxazolyl)azophenylazo]calix(4)arene [DMIAPAC] complexes has been developed and possible synergistic effects have been investigated. Chloroform, carbon tetrachloride, cyclohexane, 1,2-dichloroethane, toluene and xylene were used as the diluents. The maximum enhancement was obtained in the presence of 30% 1,2-dichloroethane. The trace amounts of metals were determined spectrophotometrically. Beer’s law obeyed in the concentration range of 5.0–95.0 μg, 8.0–120.0 μg and 10.0–140.0 μg/10 mL of the final solution of palladium, iron and tellurium, respectively. The molar absorptivities (l mol^?1cm^?1) and Sandell’s sensitivities (μg cm ^?1) were calculated: Pd(II) = 1.73 × 10⁴ and 0.0061; Fe(III) = 1.08 × 10⁴ and 0.0052; Te(IV) = 1.67 × 10⁴ and 0.0077. Ten replicate analyses containing 20 μg of Pd(II), 12.5 μg of Fe(III) and 32 μg of Te(IV) gave mean absorbance of 0.326, 0.242 and 0.418 with relative standard deviation of 0.36, 0.65 and 0.82% for Pd(II), Fe(III) and Te(IV), respectively. The interference of various ions was studied and optimum conditions were developed for the determination of these metals in certain alloys and synthetic mixtures.     

Electrophoretic and gas-chromatographic analysis of an Afobazol pharmaceutical preparation

Procedures for determining 5-ethoxy-2-[2-(morpholino)ethylthio]benzimidazole dihydrochloride, an active component of the Afobazol medicinal preparation, and its potential impurities, 5-ethoxybenzimidazol-2-thione and N-(2-chloroethyl)morpholine hydrochloride by capillary zone electrophoresis in the range 2.0 × 10^?5 to 2.0 × 10^?3 M and ligand-exchange capillary electrophoresis in the range 1.0 × 10^?5 to 5.0 × 10^?3 M are developed. The optimum conditions for the separation and determination of these analytes using a quartz capillary tube are found. The reliability of the results obtained by capillary electrophoresis was confirmed by gas chromatography with a mass-selective detector.     

Etilefrine Plastic Membrane Electrodes Based on Individual and Mixed Ion-exchangers of Etilefrinium Phosphotungstate and Tetraphenylborate.

Abstract

Etilefrine hydrochloride (EfCl) selective PVC membrane electrodes based on Etilefrinium phosphotungstate (I), Etilefrinium tetraphenylborate (II) and a mixture of both (III) were prepared, The electrodes exhibited near Nernstian response over the concentration ranges 5.0 × 10^?6 - 1.0 × 10^?1, 6.3 × 10^?6 - 1.0 × 10^?1 and 6.3 × 10^?5 - 1.0 × 10^?1 M EfCl for electrodes I, II and III, respectively. The working pH ranges of electrodes I, II and III were 10 - 8.0, 10 - 7.5 and 10 - 7.5 and their isothermal coefficients were 0.00150, 0.00088 and 0.00072 V/°C, respectively. The electrodes showed good selectivity to EfCl with respect to many inorganic cations, sugars and amino acids. The standard additions method was used to determine EfCl in pure solutions and in pharmaceutical preparations.     

Electrophoretic determination of 1-methyl-2-mercaptoimidazole in the pharmaceutical preparation mercazolyl

The conditions for the quantitative determination of 1-methylimidazoline-2-thione with the use of a Kapel’ 103-R capillary electrophoresis system were optimized (acetate buffer; pH 4.5; U = 20 kV). The analytical range of the procedure is 1.5 × 10^?4?1.8 × 10^?3 M (the limit of detection is 4.6 × 10^?5 M; RSD = 2.5%). The tablets of Mercazolyl from Akrikhin (Moscow) and Zdorov’e (Kharkov) were analyzed.     

Cyclohexane-1, 3-Dione bis (4-Methylthiosemicarbazone) as a Spectrophotometric Reagent for the Determination of Zn (II)

Abstract

The spectrophotometric study of reddish cyclohexane-1, 3-dione bis (4-methylthiosemicarbazone)-Zn(II) was made in dimethylformamide-water solution (λ_max= 475 nm, ∑ = 3.3×10⁴ 1.mole^?1. cm^?1. Sandell sensitivity = 2×10^?2 μg Zn(II).cm^?2, stoichiometry 1:1, and apparent stability constant 6.1×10⁴). A new method for the spectrophotometric determination of Zn(II) is proposed for concentrations between 0.1 and 2.5 ppm. The relative error (95% confidence level) is 0.7% for 1.0 pprn of Zn(II).

The extraction with ethylacetate of the reddish complex was also studied spectrophotometrically (λ_max = 493 nm, ∑ in organic phase = 4.8×10⁴ 1.mole^?1.cm. Sandell sensitivity = 3.4×10^?4 μg Zn(II).cm^?2, stoichiometry 1:1, apparent extraction constant 1.4×10⁴). A new method for the extraction-spectrophotometric determination of Zn(II) is proposed for concentrations, in aqueous phase, between 0.02 and 0.30 ppm. The relative error (95% confidence level) is 1.0% for 0.15 pprn of Zn(II).     

Liquid-state mercury(II) ion-selective electrode based on N-(O,O-diisopropylthiophosphoryl)thiobenzamide

A liquid ion-exchange electrode containing a complex of mercury(II) with N-(O,O-diisopropylthiophosphoryl)thiobenzamide in carbon tetrachloride is described. The electrode shows excellent sensitivity and good selectivity. The slope of the calibration graph is 29.0 mV/pHg²⁺ in the pHg²⁺ in the pHg²⁺ range 2–15.2 in mercury(II) ion buffers. The electrode can be used for determination of 5 × 10^?5–10^?2 M Hg(II) in the presence of 10^?2 M Cu(II), Ni(II), Co(II), Zn(II), Pb(II), Cd(II), Mn(II), Fe(III), Cr(III), Bi(III) or Al(III) ions and in the presence of 10^?3 M Ag(I) ions. It can bealso used for end-point detection in titrations with EDTA of 10^?3–10^?4 M mercury(II) at pH 2.     

Mandelazo I As A Reagent For Zr(IV) Determination

Abstract

A spectromeric study of the reaction of the Zr(IV) ions with Mandelazo I was carried out. Absorption spectra revealed that the maximum absorption of the zirconium compound appears at a wavelength (316 nm) different from the maxima of the reagent (253 and 390 nm). Beer-Lambert law is followed for zirconium concentrations of the order of 8.8x 10^?5 M (i.e. 8 μg Zr (IV)/mL). Possible interferences of ions such as Be(II), Cu(II), Zn(II), Al(III), Th(IV), U(VI), Mn(II), Fe(III), Co(II) and Ni(II) were investigated in connection with some masking agents such as SO₄ ^2- and C₂O₄ ^2-. Also, the solid state Zr(IV)-Mandelazo I compound was prepared and characterized by nitrogen and thermogravimetric analyses.     

Liquid-liquid extraction and spectrophotometric determination of palladium with 2-mercaptobenz-amide

2-Mercaptobenzamide (MBA) was investigated as a reagent for the extraction of palladium. The palladium complex of MBA was extracted into tributyl phosphate (TBP). The pK_a of the ligand was 5.45 with the stability constant of the palladium complex β₂=10^7.1. The composition of the complex in TBP was Pd:MBA:TBP=1:2:2. Addition of sodium chloride accelerated the rate of extraction. Various interfering ions could be masked with EDTA; Ag(I), Au(III), Os(VIII), Se(IV), Te(IV) etc. interfered. The molar absorptivity was 1.59×10⁴ l mol^?1 cm^?1; 1–35 μg Pd could be determined at pH 6.0.     

Selective extraction-photometric redox determination of low concentrations of sulfur(IV), selenium(IV), tellurium(IV), and arsenic(III)

A procedure is proposed for the selective extraction-photometric determination of the acid-forming elements S(IV), Se(IV), Te(IV), and As(III) in their mixtures containing molecular forms or anions with different electron densities on donor atoms. The procedure is based on the difference in the oxidizability of analytes with the [SbCl₆]^? complex. The analytical ranges are found at different pHs of the medium, affecting the potential of the two-phase redox systems. The detection limits for sulfite, selenite, tellurite, and arsenite are 1 × 10^?3, 5 × 10^?5, 7 × 10^?5, and 1 μg/mL, respectively. The procedure is applied to the determination of selenium in H₂SO₄ of high-purity grade, which is used in the production of microelectronics items and in some agricultural samples. The error of analysis is no worse than 20%.     

Construction and Validation of New Electrochemical Carbon Nanotubes Sensors for Determination of Acebutolol Hydrochloride in Pharmaceuticals and Biological Fluids

A simple, rapid and a highly selective method for direct electrochemical determination of acebutolol hydrochloride (AC) was developed. The developed method was based on the construction of three types of sensors conventional polymer (I), carbon paste (II) and modified carbon nanotubes (MCNTs) carbon paste (III). The fabricated sensors depend mainly on the incorporation of acebutolol hydrochloride with phosphotungstic acid (PTA) forming ion exchange acebutolol‐phosphotungstate (AC‐PT). The performance characteristics of the proposed sensors were studied. The sensors exhibited Nernstian responses (55.6 ± 0.5, 57.14 ± 0.2 and 58.6 ± 0.4 mV mol L^?1) at 25 °C over drug concentration ranges (1.0 × 10^?6‐1.0 × 10^?2, 1.0 × 10^?7‐1.0 × 10^?2 and 5.0 × 10^?8‐1.0 × 10^?2 mol L^?1 with lower detection limits of (5.0 × 10^?7, 5.0 × 10^?8 and 2.5 × 10^?8 mol L^?1 for sensors (I), (II) and (III), respectively. The influence of common and possible interfering species, pharmaceutical additives and some related pharmacological action drugs was investigated using separate solution method and no interference was found. The stability indicating using forced degradation of acebutolol hydrochloride was studied. The standard addition method was used for determination of the investigated drug in its pharmaceutical dosage forms and biological fluids. The results were validated and statistically analysed and compared with those from previously reported methods.     

AUTOCATALYTIC REDUCTION OF PYRIDINECOBALOXIME(III) BY MOLECULAR HYDROGEN

Abstract

In the presence of added cobaloxime(II), hydroxopyridinecobaloxime(III) is autocatalytically reduced by molecular hydrogen in methanol at 20°C. The sigma-shaped volumetric curves were evaluated by computer simulation of the system of differential equations corresponding to a 4-step mechanism. The key reduction step is presumably H-atom transfer from hydridocobaloxime(III) to cobaloxime(III). The lower limit of its rate constant is k₄=(5.0 ± 0.5) × 10⁴ M^?1 sec^?1 at 20°C. Hydridopyridinecobaloxime(III) is thermodynamically unstable, its estimated formation equilibrium constant being (3.9 ± 0.6) × 10^?4 M^?1. The possible role of cobaloxime(I) species is discussed.     

Capillary electrophoretic speciation of Cu(II) and Co(III) in the electroless copper plating baths

Summary A capillary electrophoretic method for the determination of Cu(II) and Co(III) chelates with ethylenediamine in electroless copper plating baths has been developed. The influence of carrier electrolyte parameters such as nature of counter-ion and pH were studied and discussed. The optimised separations were carried out in a fused silica capillary (57 cm × 75 μm I.D.) filled with an ethylenediamine sulfate electrolyte (20 mol L⁻¹ ethylendiamine, pH7.0 with H₂SO₄; applied voltage, +25 kV) using direct UV detection at 214 nm. The detection limits for a signalto-noise ratio of 3 and 10s hydrodynamic injection were 5×10⁻⁶ mol L⁻¹ for Cu(II) and 1×10⁻⁶ mol L⁻¹ for Co(III). The relative standard deviations of the peak areas for Cu(II) and Co(III) were found to be 1.5% and 2.4%, respectively, with five consecutive injections of standard solution containing 5×10⁻⁵ mol L⁻¹ of each metal ion. Application of the method to the speciation of Cu(II) and Co(III) complexes in copper plating bath samples is also demonstrated.     

Electrophoretic and spectrophotometric determination of triiodides of sulfur-containing organic cations

Trimethylsulfonium triiodide (I) and p-xylylene-bis-(tetrahydrothiophenium) triiodide (II) were identified and determined by capillary electrophoresis with the resolution R _s = 4.86 using an unmodified quartz capillary. The procedure ensures the determination of sulfur-containing organic compounds in a concentration range of 1.0 × 10^?5–5.0 × 10^?4 M RSD ≤ 5%). The high stability of trimethylsulfonium triiodide and p-xylylene-bis-(tetrahydrothiophenium) triiodide in chloroform and acetonitrile solutions was found by spectrophotometry. A procedure was proposed for the spectrophotometric determination of compounds I and II as ion associates of sulfur-containing cations with a sulfophthalein dye, Bromocresol Purple (c _min (I) = 1.32 × 10^?5 M, c _min (II) = 7.1 × 10^?6 M, RSD = 5%), and by the characteristic absorption of the triiodide anion in acetonitrile (c _min (I) = 3.18 × 10^?6 M, c _min (II) = 2.76 × 10^?6 M, RSD <-3%).     

Thermal Studies of New Lead(II) Coated‐Wire Membrane Electrodes

Five plastic membrane Pb²⁺‐selective electrodes were prepared based on 1,4‐bis(N‐tosyl‐o‐aminophenoxy)butane I , 1,4‐bis(N‐allyl‐N‐tosyl‐o‐aminophenoxy)butane II , 1,4‐bis(N‐benzyl‐N‐tosyl‐o‐aminophenoxy)butane III , 1,4‐bis[N‐(o‐allyloxybenzyl)‐N‐tosyl‐o‐aminophenoxy]butane IV , and 1,4‐bis(N‐octyl‐N‐tosyl‐o‐aminophenoxy)butane V as neutral carriers. The electrodes exhibited nearly Nernstian responses over the concentration ranges, 2.5×10^?4–4.0×10^?2, 2.5×10^?5–4.0×10^?2, 7.9×10^?5–4.0×10^?2, 2.2×10^?5–4.0×10^?2, and 1.9×10^?4–4.0×10^?2 M for electrodes composed with the ionophores I–V , respectively. All electrodes showed pH range of about 4.0 to 11.5 and working temperature range of 22 to 70 °C with isothermal temperature coefficients of 1.19×10^?3, 1.16×10^?3, 1.16×10^?3, 1.00×10^?3 , and 1.32×10^?3 V/°C for electrodes I–V respectively.