SSC-LINAC重离子RFQ动力学模拟与研究

采用多粒子跟踪程序BEAMPATH 对SSC-LINAC 重离子RFQ 直线加速器进行动力学模拟,分别对RFQ 的接受度、高频特性、束流稳定性、空间电荷效应等进行了分析。该RFQ具有很大的纵向接受度,有利于束流在RFQ中的传输;高频特性研究表明,翼间电压设定在理论值以上时,该RFQ都能保持较好的束流特性;束流稳定性分析结果表明,该RFQ具有很大的束流失配容忍度;空间电荷效应研究表明,当束流强度低于0.5 mA时,束流传输不受影响。综合研究结果表明,53.667 MHz重离子RFQ具有较好的动力学特性,满足SSC-LINAC直线加速器的设计要求。The RFQ beam dynamics of a heavy ion linac was investigated in this paper and the BEAMPATH code was employed in this study. The main research was focused on the beam performances depending on longitudinal acceptance, RF properties, beam instability and space charge effect. The RFQ has large longitudinal acceptance in design, which brings the beam performances well. In the RF parameter study, the beam can keep good transmission in the acceleration even the vane voltage is larger than the theoretical value. It is also shown that the RFQ has a large robustness for the mismatch of the input beam by the analysis of the beam instability.Furthermore, the beam evolution is independent on the space charge effect when the beam current is less than 0.5 emA. The preliminary analysis of the beam dynamics shows that the 53.667 MHz heavy ion RFQ has a promising performance, which meets the requirements of SSC-LINAC.     

RFQ冷却聚束器

简要介绍了RFQ冷却聚束器的基本原理, 并对设计中的RFQ冷却聚束器的特点和利用SIMION程序进行模拟的初步结果进行了讨论.The principle of RFQ (Radiofrequency Quadrupole) cooler and buncher is briefly introduced. The characteristics of the being designed RFQ cooler and buncher and the preliminary results simulated by using the SIMION code are discussed.     

四杆与四翼型RFQ内的二极场研究

RFQ (射频四极透镜) 是直线加速器中最重要的前级聚焦加速结构，其工作模式下束流孔中的电场四极对称性是保证束流品质及加速效率的关键。为了解决其各自存在的工作模式下四极场的不对称问题，分别对四杆型RFQ 和四翼型RFQ 的结构和模式谐振特性做了研究。针对四翼型RFQ，模拟显示双端口对称耦合的方式从抵消二极模式和提高结构对称性两方面来达到削弱工作模式下的场分布中二极量的目的，对一个1 m段四翼RFQ 模型腔的测量证实了双端口对称耦合抵消腔内二极模式的有效性；针对四杆型RFQ 的二极场，以SSC-Linac 项目的RFQ 为原型，利用三维模拟计算软件CST-MWS 进行模拟，通过改进支撑板的结构并调整参数，完全地消除了工作模式下的极间二极场，且理论上此种改进方法对支撑板结构的四杆型RFQ 均有效。Radio Frequency Quadruple(RFQ) is the most important front-end acceleration structure in linear accelerators.It can focus and accelerate beam in longitudinal and transversal direction, simultaneously. Symmetric of electric field in acceleration aperture is very important for the beam dynamics. To an idea RFQ, there is only quadruple electric field in the acceleration aperture. The dipole field in aperture is harmful and need be as small as possible. The methods to reduce it are studied in a four-rod RFQ and a four-vane RFQ in the article ndependently. To a four-vane RFQ, the symmetrical double-port couplers are employed to counteract the neighboring dipole modes. The availability is confirmed by the simulation with the 3-D Finite Element tool, CST-MWS. And it is also observed by measuring a model-cavity with a symmetrical double-port couplers. To a four-rod RFQ, a new structure of stems is proposed to reduce the dipole mode.Taking the RFQ for the SSC-LINAC project as example, the dipole mode contributions to the electric filed is completely eliminated by selecting stem’s parameters carefully. It is confirmed by the simulation of CST-MWS. heoretically, this method is independent with the frequency of an RFQ and serves for all RFQs with 4-rod or 4-wane structure.     

Preliminary design and simulation of a 162.5 MHz high-intensity proton RFQ for an accelerator driven system

A new procedure for the design and simulation of a Radio Frequency Quadrupole (RFQ) accelerator has been developed at the Argonne National Laboratory. This procedure is integrated with the beam dynamics design code DESRFQ and the simulation code TRACK, which are based on three-dimensional field calculations and the particle-in-cell mode beam dynamics simulations. This procedure has been applied to the development of a 162.5 MHz CW RFQ which is capable of delivering a 10 mA proton beam for the Accelerator Driven System (ADS) of the CAS. The simulation results show that this RFQ structure is characterized by the stable values of the beam acceleration efficiency for both the zero current beam and space charge dominated beam. For an average beam current of 10 mA, there is no transverse rms emittance growth, the longitudinal rms emittance at the exit of RFQ is low enough and there is no halo formation. The beam accelerated in the RFQ could be accepted easily and smoothly by the following super-conducting linear accelerator.     

SSC直线注入器RFQ腔体多物理场分析

SSC-LINAC是为兰州重离子研究装置（HIRFL）设计的直线注入器,它将U34+离子加速到1 MeV/u注入到分离扇回旋加速器（SSC）中,为冷却储存环（CSR）提供10 MeV/u的U34+。该注入器可以将SSC引出的重离子流强提高一个量级以上。SSC-LINAC由一个RFQ（Radio Frequency Quadrupole）加速器和4个DTL（drift tube linac）组成,设计频率为53.667 MHz。RFQ工作在连续波模式,设计功率30 kW,如果不能有效地冷却,高频电流在电极表面产生的热量会使RFQ的腔壁和电极发生形变,从而导致腔体频率的漂移以及加速和聚焦电场的改变。因此,为了保证连续波工作的RFQ加速器稳定运行,对水冷模式和通道设计提出了很高的要求。作者用有限元软件ANSYS对RFQ进行高频电磁场、温度场、结构应力的耦合分析,验证了冷却方案设计的可行性和可靠性。Heavy Ion Research Facility at Lanzhou(HIRFL) consists of SFC, SSC, CSRm and CSRe. A new linac injector, which will increase U34+ to 1 MeV/u, is designed for SSC to increase the beam intensity to ten times higher. The new injector, whose frequency is 53.667 MHz, is composed by a RFQ (Radio Frequency Quadrupole) cavity and four DTL(Drift Tube Linac) cavities. The RFQ cavity, whose RF power is 30 kW, is operated at CW(continuous wave) mode. The heat produced by HF (high frequency) electromagnetic will cause deformation of RFQ structure, lead to the resonant frequency shift, and reduce the focusing efficiency of the cavity. An efficient cooling system is necessary to ensure that the RFQ cavity can stably be operated at the nominal frequency. A detailed multi-physics field coupling analysis of RFQ has been finished with 3D finite elements software ANSYS. The result of the analysis shows that the water cooling system can cool the RFQ cavity fully and keep the frequency drift be in a acceptable level.     

RFQ冷却聚束器研究简介

详细论述了RFQ冷却聚束器相关的基本原理,简单介绍了国际上此方面的研究和我们的工作。The radiofrequency quadrupole （RFQ） cooler and buncher has been developed in many laboratories to improve the secondary radioactive ion beam quality. In this paper, the principles of the RFQ constraint, buffer gas cooling, axial electric field and Paul trap are discussed in detail. The studies around the world and our work are also briefly introduced.     

An Atomic Lens Using a Focusing Hollow Beam

We propose a new method to generate a focused hollow laser beam by using an azimuthally distributed 2π-phase plate and a convergent thin lens,and calculate the intensity distribution of the focused hollow beam in free propagation space.The relationship between the waist w0 of the incident collimated Gaussian beam and the dark spot size of the focused hollow beam at the focal point,and the relationship between the focal lenght f of the thin lens and the dark spot size are studied respectively.The optical potential of the blue-detuned focused hollow beam for^85 Rb atoms is calculated.Our study shows that when the larger waist w of the incident Gaussian beam and the shorter focal length f of the lens are chosen,we can obtain an extremely small dark spot size of the focused hollow beam,which can be used to form an atomic lens with a resolution of sereval angstroms.     

Reflectionless spatial beam benders with arbitrary bending angle by introducing optic-null medium into transformation optics

By introducing an optic-null medium into the finite embedded transformation,a reflectionless spatial beam bender is designed,which can steer the output beam by a fixed pre-designed angleβfor an arbitrary incident angle.The bending angleβof the beam bender is determined by the geometrical angle of the device,which can be changed by simply choosing different geometrical angles.For various bending angles,the designed spatial beam bender can be realized by the same materials(i.e.,an optic-null medium),which is a homogenous anisotropic material.Numerical simulations verify the reflectionless bending effect and rotated imaging ability of the proposed beam bender.A reduction model of the optic-null medium is studied,which can also be used for a reflectionless spatial beam bender with a pre-designed bending angle.     

973 RFQ 水冷调谐系统(英文)

由于束流的传输效率对射频四极场加速器(RFQ) 中射频场的分布极其敏感,所以在RFQ 的运行过程中不再采用传统的调谐器调谐RFQ。水冷调谐的方法基本上不影响RFQ 射频场的分布,所以适用于RFQ 的调谐。中国科学院高能物理研究所为C-ADS、CSNS 预研RFQ 项目开发建造了一套水冷调谐系统,使用RF 相位差作为控制量进行RFQ 水冷调谐,相位差的控制精度达到了1°运行结果显示该系统满足了RFQ 的调谐需求。介绍了该系统的水冷系统、调谐控制系统和一些运行经验。Since the beam transmission of a Radio Frequency Quadrupole(RFQ) Accelerator is very sensitive to the field profile, the ordinary frequency tuning method by the local movable tuner is no more adopted in an RFQ operation. The tuning method by controlling cooling water temperature is widely adopted to tune the RFQ due to the less affect on the RFQ field profile. A Resonance Control Cooling System (RCCS) is developed and commissioned for the 973 RFQ,which is a R&D project for C-ADS and CSNS RFQ at IHEP. This system adopts the RF phase difference as control variable to tune the RFQ. The control accuracy of the RF phase difference is about 1°. The running of the 973 RFQ shows that the RCCS works very well and fully satisfies the operation requirement of the RFQ. In this paper, the water skid, resonance control system of the RCCS and the operation experiences will be presented.     

Conceptional design of a heavy ion linac injector for HIRFL-CSRm

A room temperature heavy ion linac has been proposed as a new injector of the main Cooler Storage Ring(CSRm) at the Heavy Ion Research Facility in Lanzhou(HIRFL), which is expected to improve the performance of HIRFL. The linac injector can supply heavy ions with a maximum mass to charge ratio of 7 and an injection kinetic energy of 7.272 MeV/u for CSRm; the pulsed beam intensity is 3 emA with the duty factor of 3%. Compared with the present cyclotron injector, the Sector Focusing Cyclotron(SFC), the beam current from linac can be improved by 10–100 times. As the pre-accelerator of the linac, the 108.48 MHz 4-rod Radio Frequency Quadrupole(RFQ) accelerates the ion beam from 4 keV/u to 300 keV/u, which achieves the transmission efficiency of 95.3% with a 3.07 m long vane.The phase advance has been taken into account in the analysis of the error tolerance, and parametric resonances have been carefully avoided by adjusting the structure parameters. Kombinierte Null Grad Struktur Interdigital H-mode Drift Tube Linacs(KONUS IH-DTLs), which follow the RFQ, accelerate ions up to the energy of 7.272 MeV/u for CSRm. The resonance frequency is 108.48 MHz for the first two cavities and 216.96 MHz for the last 5 Drift Tube Linacs(DTLs). The maximum accelerating gradient can reach 4.95 MV/m in a DTL section with the length of17.066 m, and the total pulsed RF power is 2.8 MW. A new strategy, for the determination of resonance frequency,RFQ vane voltage and DTL effective accelerating voltage, is described in detail. The beam dynamics design of the linac will be presented in this paper.     

一种低能散RFQ加速器的物理设计

讨论了脉冲束注入、逐步增加同步相位、减小电极调制系数和极间电压等降低RFQ加速器能散的途径, 并在此基础上设计了一台能散为0.6%的RFQ加速器. 该加速器用于加速器质谱对¹⁴C, ¹³C, ²C 3种 离子的传输有很强的选择性, 有利于降低测量本底、简化装置.     

中国散裂中子源RFQ的热分析

射频四级场(RFQ)加速器的水冷具有以下两种功用: 首先它可以把射频场发热带走, 维持RFQ腔的热稳定性及限制RFQ强体形变幅度; 其次, 当RFQ失谐时, 它还可以用来进行RFQ的调谐, 而同时又基本不影响RFQ的射频场分布. 由于RFQ粒子的传输效率对射频场的分布极其敏感, 在RFQ的运行中不再采用传统的用调谐器对RFQ进行调谐的方法. 本文通过热分析, 确定了RFQ加速器的水冷管道的数量和布局及最佳工作水温; 确定了RFQ失谐时, 如何利用水温变化来对RFQ进行调谐的方法.     

Studies on RFQ accelerators and its applications

Development activities of Radio Frequency Quadrupole (RFQ) accelerators in China are presented.A 1 MeV O~+ RFQ and a 3.5 MeV ADS proton RFQ have been constructed.A novel separated function RFQ is under beam test, a 2 MeV D~+ RFQ is under construction and a CSNS RFQ is going to be constructed.The RFQ dynamics and the simultaneous dual beam acceleration with positive and negative ions were investigated and related codes were developed.The applications of RFQ will be further promoted in China.     

BNCT中子源用RFQ加速器

 分析了加速器作为硼中子俘获治疗(BNCT)中子源的优势,提出以射频四极场（RFQ）加速器作为BNCT用中子源的首选机型。对该RFQ的参数进行了选择,利用质子轰击锂靶近阈反应产生的前冲中子束能散低、散角小的优势,设定RFQ最终能量为1.9 MeV。采用“匹配均温”设计方法进行了此强流质子RFQ的束流动力学设计,并对设计方案进行了传输模拟,在入口归一化均方根发射度为0.25 mm·mrad、流强为100 mA时,束流传输效率为99.3％。选择合适厚度的锂靶,经过整形即可得到满足BNCT治疗需要的中子束。     

A Particle-in-cell scheme of the RFQ in the SSC-Linac

A 52 MHz Radio Frequency Quadrupole(RFQ)linear accelerator(linac)is designed to serve as an initial structure for the SSC-Linac system(injector into Separated Sector Cyclotron).The designed injection and output energy are 3.5 keV/u and 143 keV/u,respectively.The beam dynamics in this RFQ have been studied using a three-dimensional Particle-In-Cell(PIC)code BEAMPATH.Simulation results show that this RFQ structure is characterized by stable values of beam transmission efficiency(at least 95%)for both zerocurrent mode and the space charge dominated regime.The beam accelerated in the RFQ has good quality in both transverse and longitudinal directions,and could easily be accepted by Drift Tube Linac(DTL).The effect of the vane error and that of the space charge on the beam parameters have been studied as well to define the engineering tolerance for RFQ vane machining and alignment.     

Preliminary design and simulation of a 162.5 MHz high- intensity proton RFQ for an accelerator driven system

A new procedure for the design and simulation of a Radio Frequency Quadrupole (RFQ) accelerator has been developed at the Argonne National Laboratory. This procedure is integrated with the beam dynamics design code DESRFQ and the simulation code TRACK, which are based on three-dimensional field calculations and the particle-in-cell mode beam dynamics simulations. This procedure has been applied to the development of a 162.5 MHz CW RFQ which is capable of delivering a 10 mA proton beam for the Accelerator Driven System (ADS) of the CAS. The simulation results show that this RFQ structure is characterized by the stable values of the beam acceleration efficiency for both the zero current beam and space charge dominated beam. For an average beam current of 10 mA, there is no transverse rms emittance growth, the longitudinal rms emittance at the exit of RFQ is low enough and there is no halo formation. The beam accelerated in the RFQ could be accepted easily and smoothly by the following super-conducting linear accelerator.     

Beam dynamics study of RFQ for CADS with a 3D space-charge-effect

The ADS (accelerator driven subcritical system) project was proposed by the Chinese Academy of Sciences. The initial proton beams delivered from an electron cyclotron resonance ion source can be effectively accelerated by 162.5 MHz 4.2 m long room temperature radio-frequency-quadrupoles (RFQ) operating in CW mode. To test the feasibility of this physical design, a new Fortran code for RFQ beam dynamics study, which is space charge dominated, was developed. This program is based on Particle-In-Cell (PIC) technique in the time domain. Using the RFQ structure designed for the CADS project, the beam dynamics behavior is performed. The well-known simulation code TRACK is used for benchmarks. The results given by these two codes show good agreements. Numerical techniques as well as the results of beam dynamics studies are presented in this paper.