Multiple Twinned Gold Nanorods Grown by Bio-reduction Techniques

In this work we present a new method to produce gold nanorods based on the bio-reduction process. The nanorods produced tend to show twins appearing either as bands or concentric forms, generating a new type of nanorods based on a decahedral structure. Examples of these two types of twins are presented here. The main conclusion is that the bio-reduction method to produce nanorods is a good alternative to the electrochemical methods.     

Gold Nanoparticles: Production,Reshaping, and Thermal Charging

Gold nanoparticles are of great interest for various nanoelectronic applications, e.g., for making single electron transistors or very fine leads to molecular size entities. For this and other applications, it is important that all particles have controllable size and shape. In this paper, we describe the production of size-selected gold aerosol particles in the 20nm range made by evaporation in a high-temperature tube furnace and subsequent size selection. To obtain spherical particles, it was necessary to reshape the particles at high temperature, which was investigated for temperatures between 25°C and 1200°C. High-resolution transmission electron microscopy showed that the degree of crystallinity became higher for higher reshaping temperature. During reshaping at high temperature, an anomalous charging behavior was discovered, whereby negatively as well as positively charged particles became multiply negatively charged. Possible mechanisms for explaining this thermally activated phenomenon are discussed.     

Size Controlled Synthesis of Gold Nanoparticles using Photochemically Prepared Seed Particles

Gold nanoparticles having prechosen size ranging from 5 to 110 nm have been prepared in two steps. Firstly, small spherical particles (seed) of average diameters between 5 and 20 nm were prepared by varying the ratio of gold ion concentration to stabilizer/reductant, TX-100 concentration and using UV irradiation. Secondly, 20–110 nm particles were formed by a non-iterative seed-mediated growth where small particles produced by the above irradiation technique were exploited as seeds and fresh Au(III) ions were reduced onto the surface on the seed particles by ascorbic acid. The kinetics of particle formation has also been reported. These methods were fast and showed improved monodispersity sphericity and excellent reproducibility.     

Fabrication of copper oxide nanofluid using submerged arc nanoparticle synthesis system (SANSS)

The optimal parameters are found for preparing nanofluid in our submerged arc nanoparticle synthesis system (SANSS) using a copper electrode. A suspended copper oxide nanofluid is thus produced at the current of 8.5–10 A, voltage of 220 V, pulse duration of 12 μs, and dielectric liquid temperature of 2°C. The CuO nanoparticle are characterized by transmission electron microscopy (TEM), field emission scanning electron microscope (FESEM), X-ray diffraction (XRD), electron diffraction pattern (SAD) and electron spectroscopy for chemical analysis (ESCA). The equality volume spherical diameter of the obtained copper oxide particle is 49.1 nm, regular shape and narrow size distribution.This revised version was published online in August 2005 with a corrected issue number.     

Gold Nanoparticles Stabilized by Single Tripodal Ligands

In order to coat the entire surface of gold nanoparticles (AuNPs) by a single ligand, tripodal macromolecules comprising benzylic thioethers coordinating to the AuNP surface are synthesized and their abilities to stabilize AuNPs are investigated. Out of the five studied ligands 1 – 5 , the tetraphenylmethane‐based oligomers 4 and 5 display excellent AuNP coating features. Both ligand structures are able to control the dimensions of the AuNPs by stabilizing particles of narrow size distributions during their syntheses (1.05 ± 0.28 nm for Au‐4 , and 1.15 ± 0.34 nm for Au‐5 ). Closer inspection of these AuNPs by transmission electron microscopy and thermogravimetric analyses suggests that single ligands 4 and 5 are able to stabilize entire AuNPs. These particles Au‐4 and Au‐5 are obtained in good yields and display promising thermal stabilities (110 °C for Au‐4 , and 95 °C for Au‐5 ), making them interesting nanoscale inorganic–organic building blocks for further functionalization/processing by wet chemistry.     

Organization of Functionalized Gold Nanoparticles by Controlled Protein Interactions

Gold colloidal particles were synthesized and modified by molecular self‐assembly. In addition, the reaction of biotinylated colloids with a tetrameric protein, avidin, was studied by optical absorption spectroscopy and dynamic light scattering. The modification involves the chemisorption of octadecanethiol on the gold, with the further attachment of alkyl biotin and cross‐linking with avidin molecules. The specific interaction of avidin with biotin leads to the controlled cross‐linking of particles. The degree of flocculation was quantified using a semi‐empirical flocculation parameter and its dependence on the biotinylation system was studied. The measured data were in good agreement, showing the possibility of regulating the aggregation rate and size of the aggregates using the experimental time, degree of biotinylation, and avidin concentration. The morphology of the self‐assembled gold monolayers, from the aggregated particles, was imaged by high‐resolution scanning electron microscopy. The structure of the thin particulate film depends on the bulk aggregate size and aggregation rate.     

Efficient and Rapid Synthesis of Radioactive Gold Nanoparticles by Dielectric Barrier Discharge

A compact bench‐top system based on a dielectric barrier plasma discharge (DBD), enables the rapid, automatable, and continuous‐flow synthesis of gold nanoparticles (AuNPs) and radioactive gold nanoparticles (¹⁹⁸AuNPs). AuNPs are used as radiosensitizers in oncology, and ¹⁹⁸AuNPs (half‐life: 2.7 d) have been suggested as potential cancer brachytherapy sources. Plasma applied at the surface of a liquid containing gold ions (AuCl₄^?) and dextran induces the production of AuNPs directly in water. This synthesis is monitored in real time by UV–visible spectrometry: the change of absorbance of the solution provides new insights on the growth dynamics of AuNPs by plasma synthesis. By balancing gold ions and surfactant molecules, particles with a diameter lying in the optimal range for radiosensitizing applications (28 ± 9 nm) are produced. The method yields a reduction of more than 99% of the gold ions within only 30 min of plasma treatment. A postsynthesis ripening of the AuNPs is revealed, monitored by UV–visible spectrometry, and quantified within the first few hours following plasma treatment. Radioactive ¹⁹⁸AuNPs are also produced by DBD synthesis and characterized by electron microscopy and single‐photon emission computed tomography imaging. The results confirm the efficiency of DBD reactors for AuNPs synthesis in oncology applications.     

Fluorescence Correlation Spectroscopy of Gold Nanoparticles

Diffusion dynamics of gold nanoparticles (GNPs) was studied by fluorescence correlation spectroscopy (FCS). The fluorescence was studied by exciting the particles by green laser (532 nm), which is far from longitudinal plasmon band of nanorods. Transmission electron microscope (TEM) and UV-Vis-NIR spectrometer were used to characterize the gold nanoparticles. Despite their low quantum yields, GNPs possess the native fluorescence. The excellent antiphotobleaching behavior of gold nanorods leads to prospects of using FCS for its detailed studies. Using FCS, dynamic information can be extracted from the fluorescence fluctuations in the system by autocorrelation function. Maximum entropy method (MEMFCS) was used to identify the number of distinct components present in the system. The particle sizes obtained from FCS were found to be higher (by few orders of magnitude) compared to TEM analysis. This might be due to the possible contributions from cetyltrimethyl ammonium bromide (CTAB) capping in the system.     

Biological Production of Gold Nanoparticles at Different Temperatures: Efficiency Assessment

The study aims to compare different approaches and efficacies during the biological production of nanoparticles (NPs). Gold nanoparticles (AuNPs) are produced by Fusarium oxysporum at two different temperatures. One flask is incubated at 37 °C (“Common”) and the other is directly heated for 5 min at 80 °C (“Heat-treated”). Obtained AuNPs are analyzed and compared by spectrophotometry, transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), dynamic light scattering (DLS), and Fourier transform infrared spectroscopy (FTIR). Graphite furnace atomic absorption spectroscopy (GF-AAS) is used to determine the particle concentration after the AuNPs production. The AuNPs prepared by both (the Common and the Heat-treated) methods exhibit maximum absorption peaks at 541 and 528 nm, respectively, and have round shapes and sizes of less than 50 nm. Their zeta potential is about −28 mV. GF-AAS shows that the efficiency of AuNP production in Common- and Heat-treated samples is equal, between 65% and 68%. Since the Heat-treated sample shows a better size distribution, the use of higher temperature and shorter time period is preferable for the bioproduction of AuNPs. It seems that shortening the time for the production of AuNPs prevents the formation of larger NPs.     

DNA Biosensor with High Sensitivity Amplified by Gold Nanoparticles

A biosensor based on quartz crystal microbalance (QCM) using 50 nm gold nanoparticles as the amplification probe for DNA detection was reported in this paper. It had been found that a DNA detection sensitivity of 10^–14 M could be obtained, which was higher than what has been ever reported using the same method. In the curve of weight increase (m) against the target DNA in solution, a plateau appeared as the concentration of analyte DNA increasing, implying the existence of monolayer of gold nanoparticles binding on the top of target DNA. The high sensitivity was explained not only by the weight of the larger particles, but also the larger area occupied by the larger particles which need less target DNA for their binding.     

Assembly of Gold Nanoparticles on Gold Nanorods Using Functionalized Poly(N‐isopropylacrylamide) as Polymeric “Glue”

A telechelic thermoresponsive polymer, α‐amino‐ω‐thiol‐poly(N‐isopropylacrylamide) (H₂N‐PNiPAM‐SH), is used as the polymeric glue to assemble gold nanoparticles (AuNPs) around gold nanorods (AuNRs) into a satellite structure. Prepared by reversible addition‐fragmentation chain transfer polymerization followed by hydrazinolysis, H₂N‐PNiPAM‐SH is able to interlink the two types of the gold building blocks with the thiol‐end grafting on AuNRs and the amine‐end coordinating on the AuNP surface. The density of the grafted AuNPs on AuNRs can be tuned by adjusting the molar ratio between AuNPs and AuNRs in the feed. The resulted satellite‐like assembly exhibits unique optical property that was responsive to temperature change.     

Poly(allylamine) Stabilized Iron Oxide Magnetic Nanoparticles

This paper describes a new method for the dispersing and surface-functionalization of metal oxide magnetic nanoparticles (10 nm) with poly(allylamine) (PAA). In this approach, Fe₃O₄ nanoparticles, prepared with diethanolamine (DEA) as the surface capping agent in diethyleneglycol (DEG) and methanol, are ligand exchanged with PAA. This method allows the dispersing of magnetic nanoparticles into individual or small clusters of 2–5 nanoparticles in aqueous solutions. The resulting nanoparticles are water soluble and stable for months. The PAA stabilized Fe₃O₄ nanoparticles are characterized by TEM, TGA, and FT-IR. The PAA-coated Fe₃O₄ nanoparticles will allow further chemical tailoring and engineering of their surfaces for biomedical applications.     

Uptake of Europium(III) from Water using Magnetite Nanoparticles

It is demonstrated that colloidal magnetite nanoparticles can be used as nanosorbents for lanthanide ions dissolved in water. In particular, a series of experiments are performed for the removal of Eu(III) in distinct analytical conditions and by applying an external magnet to collect the sorbents previously dispersed in water samples. Furthermore, strategies for surface chemistry functionalization are also investigated, aiming to investigate the effect of this parameter on the removal capacity of the Fe₃O₄ nanoparticles. The supernatant solutions are monitored for the remaining amount of Eu(III) by fluorescence emission measurements in the presence of 2,6‐pyridinedicarboxylic acid as a sensitizer. The results demonstrate that neat Fe₃O₄ nanoparticles are capable of capturing lanthanide ions (III) from aqueous solutions (pH 7), without need of surface modification, and for subsequent removal by magnetic separation. During the removal, efficiency is increased after modifying the particles' surfaces with silica and 3‐aminopropyltrimethoxysilane; in alkaline medium (pH 10), there is complete removal regardless the type of nanosorbent used. This has been explained by the formation of insoluble Eu(III) species that adsorb strongly to the nanosorbents surfaces allowing their subsequent magnetic separation.     

金-二氧化钛（Au-TiO_2）复合薄膜的制备及局域表面等离子体共振（LSPR）效应

利用溶胶凝胶法在玻璃衬底上制备了金-二氧化钛（Au-TiO2）复合纳米薄膜,研究了热处理温度对复合薄膜表面纳米颗粒沉积的影响。利用原子力显微镜对样品进行了形貌表征,结果显示：复合薄膜是由纳米微晶组成的致密膜,温度越高越有利于Au粒子的形成。在550℃的热处理温度下,薄膜表面沉积的纳米微晶的粒径约为100nm。利用紫外-可见分光光度计测量了反射谱线,结果表明：由于局域表面等离子体共振（LSPR）的产生,在不同的热处理温度下,第一个反射峰（短波长处）不发生变化,第二个反射峰（长波长处）发生漂移（红移）。     

海胆状金纳米粒子表面形貌对表面增强喇曼散射特性的影响

采用改进的一步还原法合成了多种海胆状金纳米粒子,并对它们的表面增强喇曼散射特性与其表面形貌的关系进行了实验研究.实验表明,合成的海胆状金纳米粒子的直径及表面的尖刺大小可以通过改变加入到氯金酸溶液中的硝酸银的量来调节.当加入到氯金酸溶液中的硝酸银为1μL时,合成的海胆状金纳米粒子的直径最小而尖刺最长.同时测量的紫外-可见-近红外吸收光谱表明,海胆状金纳米粒子的局域表面等离子体共振带会随着加入到氯金酸溶液中的硝酸银量的增加而变宽.此外,通过喇曼标记分子对巯基苯甲酸(4MBA)的喇曼光谱测量发现,较小直径和较长尖刺的海胆状金纳米粒子具有更强的表面增强喇曼散射活性.     

激光诱导玻璃内部金纳米颗粒的析出及光谱

使用钛宝石飞秒激光引发和热处理相结合，实现了在含有金离子的硅酸盐玻璃内部，有空间选择性地析出金纳米颗粒。对吸收光谱的研究表明，随着热处理温度的升高，吸收峰强度增大且红移；随着激光功率密度的增大，金纳米颗粒也增大。在特定的激光和热处理条件作用下，可以在玻璃内部有空间选择性的使金离子还原后聚集，形成金纳米颗粒，具有量子尺寸效应。改变激光功率和热处理温度可以控制所析出的金属纳米粒子的尺寸，从而实现多色显示，飞秒激光诱导金纳米颗粒具有稳定性，颜色具有持久性。     

Structural and Optical Properties of Gold/Silica “Mushroom” Particles Prepared by Interfacial Templating

Complex shaped nanoparticles featuring structural or surface chemical patchiness are of special interest in both fundamental and applied research areas. This study reports the preparation and optical properties of gold/silica “mushroom” nanoparticles, where a gold particle is only partially covered by the silica cap. The synthetic approach allows precise control over the particle structure. The interfacial preparation method relies on partially embedding the gold particles in a polystyrene layer that masks the immersed part of the gold particle during silica shell growth from an aqueous solution. By adjusting sacrificial polystyrene film thickness and silica growth time, precise control over the coverage and cap thickness can be achieved. Correlative electron microscopy and single particle scattering spectroscopy measurements underline the high precision and reproducibility of the method. The good agreement between the measured and simulated single particle spectra supported by near‐field calculations indicates that the observed changes in the dipolar plasmon resonance are influenced by the extent of coverage of the gold core by the silica cap. The straightforward methods readily available for gold and silica surface modification using range of different (bio)molecules make these well‐defined nanoscale objects excellent candidates to study fundamental processes of programmed self‐assembly or application as theranostic agents.     

Nucleation of Polypropylene Crystallization with Gold Nanoparticles. Part 2: Relation between Particle Morphology and Nucleation Activity

The influence of gold nanoparticle morphology on nucleation of isotactic polypropylene (PP) crystallization was investigated. Previous experiments indicated certain nucleation activity of gold nanoparticles, varying with their size. In this work, eight types of gold micro/nanoparticles were used: vacuum-sputtered nanostructures (nanoparticles, nanoislands, and nanolayers), chemically prepared isometric gold nanocrystals (5, 20, and 100 nm diameters), and two types of gold microcrystals with well-developed crystal facets [with (100) and (111) facets, respectively]. To minimize the effect of particle agglomeration, we used our recently introduced sandwich method, in which the nucleating agent was deposited between thin PP films and the nucleation was evaluated by polarized light microscopy (PLM), X-ray scattering (WAXS), and differential scanning calorimetry (DSC). The nucleation activity of Au particles in PP was lower than it might be expected from the previous studies and depended on their morphology. The nucleation activity of Au microcrystals with well-developed facets was higher than the activity of non-faceted Au nanocrystals.