偏光全息研究历程与展望

全息是目前一项极具前景的科学技术,即通过信号光和参考光的干涉,在小小的全息图上记录丰富的信息。相比于传统全息仅记录光波的相位、振幅信息,偏光全息可以将额外的偏振信息记录于偏振态敏感材料中。本文从偏光全息材料入手,详细介绍了偏光全息生产过程;同时介绍基于琼斯理论和张量理论的偏光全息原理和研究进展;最后描述了偏光全息在全息存储和纳米光学领域的发展前景。     

利用单个全息透镜实现光学变换的理论

在离散取样情形下,证明了利用单个全息透镜所组成的光学系统能够实现任意给定的线性变换;给出了为实现给定变换而设计全息透镜振幅和相位分布的方法;并以三种不同序的八维Walsh变换为例,得到了实现这些变换的全息透镜的振幅和相位分布。 关键词：     

Minute displacement and strain analysis using lensless Fourier transformed holographic interferometry

An optical system for lensless Fourier transformed holographic interferometry is constructed to enable the measurement of minute displacements from nanometers to micrometers scale and to obtain corresponding strain distributions using a CCD camera with poor spatial resolution. Since a Fourier spectrum of an object beam is recorded on a hologram in this technique, the image reconstruction is easily performed with a single pass of 2-D fast Fourier transformation. Then, the map of the phase difference over the whole field is obtained by comparing two images before and after deformation. A suitable and effective unwrapping process is, however, inevitably required since the phase difference distribution is wrapped from −π to π in this technique. For phase unwrapping, the maximum spanning tree method is adopted here, which seeks a spanning tree that maximizes overall edge weights given by the cross amplitude. In-plane and out-of-plane displacements are obtained separately from the phase difference distributions at one's request. Moreover, in-plain strain is easily calculated from the in-plane displacement distribution.     

Quantitative three-dimensional holographic interferometry for flow field analysis

Holographic interferometry offers the potential for quantitative, wholefield analysis of three-dimensional compressible flows. The technique is non-intrusive, does not require the introduction of seeding particles, and records the entire flow information within the pulse duration of a Q-switched ruby laser (˜30ns). At present, however, holographic interferometry is mainly used qualitatively due to the practical restrictions of data recording, acquisition and processing.To address the potential of holographic flow analysis a prototype multi-channel interferometer has been designed and preliminary wind tunnel results have been obtained. The proposed configuration uses specular illumination which, unlike comparable diffuse systems, does not suffer from fringe localisation and speckle noise. Beam collimation and steering through the flow field is achieved in a single operation by the use of holographic optical elements (HOEs). The resulting design is compact, light efficient, has aberration compensation, and the recorded data are conducive to both tomographic analysis and direct comparison to computational fluid dynamics (CFD) predictions.Holograms have been recorded of simple two-dimensional and axisymmetric compressible flows, to compare the accuracy of holographic density measurements with data from conventional pressure sensors and CFD codes. Data extraction from the holograms, and the elimination of rigid body motion, was achieved using digital Fourier transform fringe analysis. The introduction of phase errors by image processing has been investigated by analysing simulated fringe patterns generated from a combination of experimental amplitude information and computer generated phase data.     

Characterisation of light emitting diodes (LEDs) for application in digital holographic microscopy for inspection of micro and nanostructured surfaces

Partial coherent light sources open up prospects for phase noise reduction in digital holographically reconstructed phase distributions by suppressing multiple reflections in the experimental setup. Thus, light emitting diodes (LEDs) are investigated for application in digital holographic microscopy. First, the spectral properties and the resulting coherence length of an LED are characterised. In addition, an analysis of dispersion effects and their influence on the hologram formation is carried out. The coherence length of LEDs in the range of a few micrometers restricts the maximum interference fringe number in off-axis holography for spatial phase shifting. Thus, the application of temporal phase-shifting-based digital holographic reconstruction techniques is compared to spatial phase-shifting-based methods. It is demonstrated that LEDs are applicable for digital holographic microscopy in connection with both spatial and temporal phase-shifting-based techniques for reduction of noise in comparison to a laser-light-based experimental setup.     

Visualized measurement of the acoustic levitation field based on digital holography with phase multiplication

By using digital holographic interferometory with phase multiplication, the visualized measurement of the acoustic levitation field (ALF) with single axis is carried out. The digital holograms of the ALF under different conditions are recorded by use of CCD. The corresponding digital holographic interferograms reflecting the sound pressure distribution and the interference phase distribution are obtained by numerical reconstruction and phase subtraction, which are consistent with the theoretical results. It indicates that the proposed digital holographic interferometory with phase multiplication can successfully double the fringe number of the interference phase patterns of the ALF and improve the measurement precision. Compared with the conventional optical holographic interferometory, digital holographic interferometory has the merits of quasi real-time, more exactitude and convenient operation, and it provides an effective way for studying the sound pressure distribution of the ALF.     

Wave optics analysis by phase-shifting real-time holographic interferometry

The purpose of this work is to study the potentialities in the phase-shifting real-time holographic interferometry using photorefractive crystals as the recording medium for wave-optics analysis in optical elements and non-linear optical materials. This technique was used for obtaining quantitative measurements from the phase distributions of the wave front of lens and lens systems along the propagation direction with in situ visualization, monitoring and analysis in real time.     

Measurement of refractive index change induced by dark reaction of photopolymer with digital holographic quantitative phase microscopy

Light-induced refractive index change in photopolymer is quantified by a digital holographic microscope. The refractive index change is induced as the dark reaction which proceeds inside the photopolymer after a writing beam is stopped. Time-lapse phase distribution across the photopolymer is measured by the off-axis digital holographic microscope which enables us to retrieve the 2-D phase map from a single hologram. It is found that the initial phase profile does not coincide with the illumination intensity distribution. This observation suggests that the rate of the refractive index change in dark reaction is not proportional to the illumination intensity in case the exposure energy becomes high.     

Light-induced scattering in photorefractive crystals

Light-induced scattering features in LiNbO₃- and BaTiO₃-crytals are compared with theories on holographic writing in photorefractive crystals. It is shown that they describe the experimental facts concerning the expected main scattering directions for a given incident polarization, the time development, the thickness and the wavelength dependence. Time records of the transmission offer a useful alternative for the determination of the photoconductivity. Furthermore, a new method for birefringence measurements is established. The high accuracy of this method is based on the automatic fulfillment of a phase matching condition by the anisotropically scattered radiation.     

Phase conjugation in fluorescein film by degenerate four-wave mixing and holographic process

Phase conjugation is performed in a fluorescein film by a cw Ar ion laser of the wavelength 0.488 μm in a degenerate four-wave mixing (DFWM) configuration. It becomes apparent that the phase conjugate wave is generated simultaneously by not only DFWM but also a holographic process and that the DFWM and holographic components of the phase conjugate wave have different time constants.     

Digital holography particle image velocimetry for the measurement of 3Dt-3c flows

In this paper a digital in-line holographic recording and reconstruction system was set up and used in the particle image velocimetry for the 3Dt-3c (the three-component (3c), velocity vector field measurements in a three-dimensional (3D), space field with time history (t)) flow measurements that made up of the new full-flow field experimental technique—digital holographic particle image velocimetry (DHPIV). The traditional holographic film was replaced by a CCD chip that records instantaneously the interference fringes directly without the darkroom processing, and the virtual image slices in different positions were reconstructed by computation using Fresnel–Kirchhoff integral method from the digital holographic image. Also a complex field signal filter (analyzing image calculated by its intensity and phase from real and image parts in fast fourier transform (FFT)) was applied in image reconstruction to achieve the thin focus depth of image field that has a strong effect with the vertical velocity component resolution. Using the frame-straddle CCD device techniques, the 3c velocity vector was computed by 3D cross-correlation through space interrogation block matching through the reconstructed image slices with the digital complex field signal filter. Then the 3D-3c-velocity field (about 20 000 vectors), 3D-streamline and 3D-vorticiry fields, and the time evolution movies (30 field/s) for the 3Dt-3c flows were displayed by the experimental measurement using this DHPIV method and techniques.     

用于大景深单分子定位显微的多功能全息相位片的设计及数值模拟

发展具有大轴向定位范围的单分子定位技术对于实现厚样品的超分辨成像具有重要的价值.基于波前编码技术,将变形多值纯相位光栅与双螺旋点扩散函数相位片相结合,提出一种可以通过空间光调制器实现的具有高衍射效率的新型全息相位片的设计方法.这种全息相位片可以将样品内多个层面的分子信息以双螺旋的形式成像在同一个探测面的不同位置,在无需扫描的情况下提高双螺旋点扩散函数工程的轴向定位范围和分辨率,解决活细胞内单分子定位和示踪技术中的大景深探测难题.数值模拟表明,设计的5×5全息相位片可以将样品内25个层面上的分子信息以双螺旋的形式成像在同一探测面上的不同位置,相邻两个层面的间隔为0.5μm,实现了轴向12μm的探测范围,证明了设计的可行性.     

光学变换中的离散取样方法

本文研究了光学变换中的离散取样问题。基于幺正变换的考虑,求得了光学变换中离散取样方法所依据的条件。导出了包含取样单元透光孔作用的光传播矩阵。最后,以自然序Walsh变换为例,具体计算了变换所需全息透镜的振幅与相位分布及相应的误差。 关键词：     

All-Dielectric Multichannel Terahertz Metasurface Empowering Independent Wavefront Manipulation

Metasurfaces have demonstrated unprecedented capabilities in modulating the polarization and phase of electromagnetic waves and formed an emerging field of research, driving the exploitation of versatile compact devices. In this work, one transmission-mode, multichannel all-silicon metasurface platform that can implement functionalities separately in two orthogonally polarized output fields under linearly polarized incidences is proposed, which can effectively promote the design flexibility. Specifically, a single metasurface can realize multiple independent target phase distributions carrying specific phase relationships, thus enabling different information processing in different linear polarization states. For proof-of-principle experimental exhibitions, a monolayer metasurface composed of silicon pillars is designed, fabricated, and characterized to demonstrate the ability of multi-dimensional light field control, such as polarization-switchable focusing beam. Moreover, the other designed metasurface can generate polarization-switchable Bessel vortex beams under linearly polarized incidences, which also verifies the flexibility and practicality of such platform. This metasurface platform may lead to new optical components, involving multichannel singular beam generators, information encoders, and holographic encryption devices.     

碱性品红光致聚合物薄膜的光致光衍射

本文研究了全息存储实验中以波长532 nm的半导体激光器作为记录和读出光源,碱性品红作为光敏剂的丙烯酰胺基光致聚合物薄膜的光致光衍射现 象.它可以考虑为透过全息干涉条纹的原始入射光和反射光,与来自光聚物中未曝光的不均匀表面和内部的散射光四波混频的结果.根据简并四波混频理论中的位相匹配条件对双光束全息写入时产生的衍射光锥,以及单光束辐照复现时产生的衍射光锥现象分别做出了理论解释;并且利用全息散射理论结合三角学知识对入射光的入射角与衍射光锥的锥角的依赖关系进行了深入讨论. 关键词： 全息 光致聚合物 衍射光锥 碱性品红     

Model-based processing of a holographic moiré

A state space model for the determination of dual phase distributions in a holographic moiré in the presence of nonsinusoidal waveforms, random noise, and miscalibration of the piezoelectric (PZT) devices is proposed. The extraction of these phase terms requires incorporating two PZTs into the moiré setup. A Toeplitz approximation method (TAM) is applied for phase determination, and modification to the Toeplitz covariance matrix formed from the phase-shifted moiré fringes by application of a denoising step in the state-feedback matrix is proposed. This step ensures that the phase terms can even be estimated at a signal-to-noise ratio much lower than that of the original TAM or by our previously suggested polynomial based method.     

Digital color holographic recording and reconstruction using synthetic aperture and multiple reference waves

This paper presents a method for recording and reconstructing high-quality digital color holographic images. The synthetic aperture technique is used to improve the resolution of the reconstructed image and also reduce the speckle size in the reconstruction plane. Subsequently, the multiple reference wave technique is used to suppress speckle noise in the reconstructed color holographic image by superposing speckle fields with different distributions. The final high-quality color holographic image is obtained due to the resolution improvement and speckle noise reduction achieved by the two techniques. Our method has potential applications in the digital color holographic displays.     

双掺杂铌酸锂晶体中体全息记录的振荡特性研究

分析了双中心记录初始阶段振荡现象的产生机制,研究了晶体掺杂浓度和记录光与UV光的束比对记录初期阶段振荡特性的影响.结果表明,振荡现象可以归因于记录介质双能级中心深浅能级电子数平衡分布的改变.在浅能级掺杂浓度较小的晶体中记录时,振荡强度较大;记录光与UV门光束的光束比越大,振荡持续时间越短.     

Wave-front curvature compensation of polarization phase-shifting digital holography

An on-axis polarization phase-shifting digital holographic microscope, based on a normal upright optical microscope, is constructed to quantitatively measure both the amplitude and phase distributions of specimen. The condenser lens and microscope objective employed in the object beam path enhance the illumination and magnification of the image, however, they induce additional phase aberration of the object wave. The physical formation of the phase aberration is theoretically analyzed, and a formula for the object wave front involving the phase aberration in the CCD plane is derived. The phase aberration can be eliminated in the reconstruction procedure by measuring a specimen-free hologram and then fitting the aberration phase with a least square ellipsoidal model to determine the parameters of the system. This phase aberration compensation procedure also reduces some of noises in the reconstructed phase of the specimen. The practicability of this method is demonstrated by a test experiment on microlenses.     

Laser-induced preferential domain nucleation in hafnium-doped congruent lithium niobate crystal

The focused visible laser-induced preferential domain nucleation effect is investigated in 3 mol% hafnium-doped congruent lithium niobate crystal. The local phase variation is in-situ monitored during laser-induced preferential domain nucleation. The variations of phase distributions are reconstructed by digital holographic interferometry. The nucleation field decreases exponentially with increasing irradiation intensity. The space charge field along the z direction is thought to be an important mechanism for the laser-induced preferential domain nucleation. Laser-induced hafnium-doped congruent lithium niobate crystals appear to be a promising candidate for further development of ferroelectric domain engineering.