疏水缔合(丙烯酰胺十六烷基二甲基烯丙基氯化铵-2-丙烯酰胺基-2-甲基丙磺酸)三元共聚物的合成与性能研究

疏水缔合水溶性聚合物是指在聚合物亲水性大分子链上引入少量疏水基团的一类水溶性聚合物[1～5].在水溶液中,疏水基团之间由于憎水作用而发生聚集,使大分子链产生分子内与分子之间缔合.在临界缔合浓度以上,以分子间缔合为主,增大了流体力学体积,因此,具有较好的增粘作用.疏水基的加入可大幅度地改变聚合物的流变性能.在聚合物驱油中的流度控制,提高波及效率、以及调剖中起到非常重要的作用.     

荧光探针法研究疏水改性聚丙烯酰胺溶液的疏水缔合行为

采用胶束共聚 共水解方法合成疏水改性水溶性聚合物聚(丙烯酰胺/丙烯酸钠/N 辛基丙烯酰胺)[P(AM/NaAA/C8AM)],并以芘为荧光探针,应用稳态荧光光谱法研究了它的疏水缔合行为。结果表明,随聚合物浓度、疏水单体摩尔分数、疏水侧链长和温度的增加,疏水缔合作用增强;不同疏水单体含量的P(AM/NaAA/C8AM)的临界缔合浓度为1.5~3.0 g/L;表面活性剂十二烷基硫酸钠(SDS)与P(AM/NaAA/C8AM)发生了强烈的疏水相互作用,形成混合胶束,得到SDS的临界胶束浓度(CMC)为8×10-3 mol/L;由于聚合物链上羧基的存在,使其具有良好的 pH敏感性,随 pH值的增大,P(AM/NaAA/C8AM)的疏水缔合作用呈现先减弱后恒定再增强的变化。     

AM/AA/DMDAAC/OAM疏水缔合的两性共聚物的合成及性能研究

以十八醇为原料,制备长链疏水单体N-十八烷基丙烯酰胺(OAM)。以丙烯酰胺(AM)、丙烯酸(AA)、二甲基二烯丙基氯化铵(DMDAAC)、N-十八烷基丙烯酰胺(OAM)为单体,通过胶束聚合法合成了水溶性疏水缔合两性四元共聚物。利用FT-IR、1HNMR、DTA-TG对聚合物的结构和热稳定性进行分析,考察了疏水基团摩尔分数、聚合物浓度对聚合物溶液表观粘度、储能模量、耗能模量等流变性能的影响,并对四元共聚物溶液的性能进行评价。结果表明,疏水两性共聚物具有很好的耐温、抗盐、耐剪切等优异性能。     

离子液体中AM/AMPS/N8AM三元共聚物的合成及溶液性能

以丙烯酰胺(AM)和2-丙烯酰胺基-2-甲基丙磺酸(AMPS)为亲水单体, 以N-辛基丙烯酰胺(N8AM)为疏水单体, 在离子液体[bmim]BF4中实现了疏水缔合丙烯酰胺三元共聚物的合成.     

荧光淬灭法研究疏水缔合共聚物(PAM-b-PPOEA)_n自组装聚集数

运用荧光淬灭技术,包括稳态荧光淬灭法(SSFQ)和时间分辨荧光淬灭法(TRFQ),研究了疏水缔合水溶性丙烯酰胺2苯氧基丙烯酸酯多嵌段共聚物[P(AM POEA)]在水溶液中自组装的聚集数.这类聚合物在水溶液中易形成胶束状聚集体,探针芘分子和淬灭剂二苯酮增溶于疏水微区,荧光测定结果很好地符合Poisson淬灭模型.实验结果表明聚合物链结构、聚合物浓度和无机盐对聚集体的尺寸具有重要影响.聚合物自组装聚集数NA随疏水单体含量的增加和疏水嵌段长度的减小而增大,同时也随聚合物浓度和NaCl浓度增加而增大.另外对聚合物链结构、聚集数和溶液粘度的相互关系进行了讨论.     

疏水缔合型丙烯酰胺类聚合物Ⅰ.疏水单体N-苯基甲酰胺-丙烯酰胺的合成与表征

通过异氰酸苯酯和丙烯酰胺(AM)的取代反应,制备了疏水缔合型单体N-苯基甲酰胺-丙烯酰胺(HMAM)。用红外光谱、核磁共振氢谱、质谱、元素分析和差示扫描量热仪对HMAM进行表征。结果表明,HMAM单体含有疏水和亲水基团,可用于制备新型水溶性疏水缔合型聚合物,该聚合物不溶于水和丙酮等强极性溶剂,但能溶于二甲亚砜和N,N-二甲基甲酰胺等中等极性的溶剂中。     

丙烯酰胺和表面活性大单体共聚物的合成及其性能研究

首先合成表面活性大分子单体丙烯酸聚氧乙烯（２３）－十二烷基酯（ＡＡ－ＰＯＥＬＥ）,再通过与丙烯酰胺共聚合的方法得到在水溶性聚合物聚丙烯酰胺分子结构中引入疏水基团的共聚物改性ＰＡＭ。因ＡＡ－ＯＰＥＬＥ单体具有表面活性,所以共聚合时无需添加乳化剂。当改性ＰＡＭ中疏水基团含量为１．１０ｍｏｌ％时,其水溶液表现出独特的流变性和增稠性,着重讨论了改性ＰＡＭ作为乳胶增稠剂的性能。     

含孪尾型丙烯酰胺的HAPAM在新胶束聚合体系中的制备及其疏水缔合性

以表面活性单体2-丙烯酰胺基十二烷磺酸钠(NaAMC12S)为表面活性剂构建了新的胶束共聚合体系,实施了丙烯酰胺(AM)与N,N-二正十二烷基丙烯酰胺(DiC12AM)的胶束共聚合,制备了含孪尾型丙烯酰胺的疏水缔合聚丙烯酰胺(HAPAM),该聚合物为三元共聚物DiC12AM/NaAMC12S/AM.通过控制共聚合条件,制得了微结构系列变化的共聚物;采用红外光谱法表征了三元共聚物的化学结构,用荧光探针法与表观粘度法重点研究了共聚物DiC12AM/NaAMC12S/AM的大分子链微结构与其疏水缔合性的关系.结果表明:新胶束共聚合体系大大简化了胶束的共聚合操作,而且由于表面活性单体进入共聚物主链,使三元共聚物DiC12AM/NaAMC12S/AM具有更强的疏水缔合性.与由单尾型丙烯酰胺N-正十二烷基丙烯酰胺(C12AM)为疏水单体制备的HAPAM相比,由DiC12AM制得的HAPAM疏水缔合性更为显著.     

疏水改性聚丙烯酸溶液的流变特性研究

本文通过沉淀聚合制备了具有不同主链结构的疏水改性聚丙烯酸(HMPA),由Huggins方程确定了HMPA在溶液(水,盐/水,醇/水)中的特性粘数[η]和Huggins常数KH,采用流变学法研究了HMPA溶液的疏水缔合行为和流变特性.研究表明,HMPA溶液具有典型的剪切变稀行为,主链结构对HMPA溶液的缔合行为和流变特性有显著影响.主链含有疏水链段的HMPA在乙二醇/水溶液中形成类似弹性体的凝胶网络结构,具有较大的活化能,其表观粘度具有明显的温度敏感性.     

新型疏水缔合丙烯酰胺/2-苯氧乙基丙烯酸酯共聚物的合成与性质

采用胶束共聚方法合成了一种新型的疏水缔合共聚物 ,它由丙烯酰胺 (AM)和少量的 2 苯氧乙基丙烯酸酯 (POEA) (<1 0mol% )组成 ,具有良好的水溶性 .当溶液浓度超过一定值c 后 ,由于分子间的疏水缔合 ,产生很大的增粘作用 .研究了不同聚合条件下包括单体浓度、投料比和SMR值对聚合物的结构和性能的影响 .实验结果表明 ,聚合物的粘度性质和缔合行为取决于其分子量的大小、疏水单体含量及其嵌段的长度和分布 .     

Micellar Copolymerization:the State of the Arts

Over the past two decades, hydrophobically modified water-soluble polymers (HMWSPs),particularly hydrophobically associating polyacrylamides (HAPAMs), have attracted increased interest owing to their practical and fundamental importance[1]. This system usually consists of a hydrophilic backbone with a small proportion (generally less than 2 mol %) of hydrophobic pendent groups. When dissolved in aqueous solutions, the apolar moieties tend to exclude water and are held together by intra- and intermolecular hydrophobic associations. This leads to a transitional network structure that induces a substantial increase in solution viscosity. Such viscosity-building ability is further elevated upon adding salt or increasing temperature due to the enhanced polarity.Additionally, the dynamic associating junctions can be ruptured upon high shear stress, but re-formed when the force ceases. All these unique properties enable HAPAMs attractiveness to various industrial uses in which the control of fluid theology is required.However, it is a great challenge to synthesize HAPAMs since acrylamide and hydrophobic comonomers are mutually incompatible. After attempts using heterogeneous, inverse emulsion,microemulsion, and precipitation copolymerization processes, the commonly accepted method is micellar free radical copolymerization in which an appropriate surfactant is used to solubilize the hydrophobic comonomer[2].In this paper, the sate of the arts for micellar copolymerization is comprehensively reviewed:1. the mechanism of micellar copolymerization;2. parameters affecting micellar copolymerization, including:(1) nature and level of hydrophobic comonomer;(2) nature and content of surfactant used;(3) initiator and temperature.3. structural characteristics of HAPAMs prepared via micellar copolymerization;4. properties of HAPAMs prepared via micellar copolymerization:(1) dilute solution properties;(2) semi-dilute solution properties.5. applications of micellar copolymerization.In short, the main goal of this review is trying to establish an interrelationship among .synthetic method, structure and properties, so as to give a guideline for "tailoring" the polymer structure to satisfy different specific end use.     

An Alternative Way towards Preparation of Hydrophobically Associating Polyacrylamide:Chemical Post-Modification

Hydrophobically associating polyacrylamides (HAPAMs) are derivatives from polyacrylamides by incorporating a small amount of hydrophobic moieties along the water-soluble mainchain. They are now becoming a class of promising candidates as thickeners or rheology modifiers in the formulations where rheology is necessary to be regulated, such as tertiary oil recovery, drilling fluids, hydraulic fracturing and coatings. Due to association of hydrophobes in nano-domains, their aqueous solutions exhibit very interesting rheological properties and better stability against salts than the unmodified precursor, polyacrylamide.Generally, there are two synthetic routes to introduce hydrophobic portion onto water-soluble polymer chains; i.e., direct copolymerization of hydrophobic and hydrophilic monomers, and post-polymerization functionalization[1]. In the case of HAPAM polymers, a commonly accepted method is micellar copolymerization in which an appropriate surfactant is employed to solubilize both monomers. However, it is widely reported[2] that the obtained polymers via micellar polymerization are characterized by: (i) blocky distribution of the hydrophobes; (ii) compositional inhomogeneity and (iii) strong dependence of solution properties on the block length.In this work, the alternative process, i.e., chemical post-modification, is employed to synthesize HAPAM polymers by direct N-alkylation of parent polyacrylamide (Figure 1) in dimethyl sulfoxide[3,4].PAM HAPAMFig. 1 Schematic route to prepare HAPAM by direct N-alkylation of PAMIt is found that the final incorporation of hydrophobic groups is in good agreement with the feed ratio[4], in contrast with that from micellar copolymerization which always brings about composition drift. Furthermore, unique rheological responses to shear rate, salt, temperature are also evidenced[5].     

Improved dewatering behavior of clay minerals dispersions via interfacial chemistry and particle interactions optimization

Orthokinetic flocculation of clay dispersions at pH 7.5 and 22 degrees C has been investigated to determine the influence of interfacial chemistry and shear on dewatering and particle interactions behavior. Modification of pulp chemistry and behavior was achieved by using kaolinite and Na-exchanged (swelling) smectite clay minerals, divalent metal ions (Ca(II), Mn(II)) as coagulants and anionic polyacrylamide copolymer (PAM A) and non-ionic polyacrylamide homopolymer (PAM N) as flocculants. The pivotal role of shear, provided by a two-blade paddle impeller, was probed as a function of agitation rate (100-500 rpm) and time (15/60 s). Particle zeta potential and adsorption isotherms were measured to quantify the interfacial chemistry, whilst rheology and cryogenic SEM were used to investigate particle interactions and floc structure and aggregate network, respectively. Osmotic swelling, accompanied by the formation of "honeycomb" particle network structure and high yield stress, was produced by the Na-exchanged smectite, but not kaolinite, dispersions. Dispersion of the clay particles in 0.05 M Ca(II) or Mn(II) solution led to a marked reduction in particle zeta potential, complete suppression of swelling, honeycomb network structure collapse and a concomitant reduction in shear yield stress of smectite pulps. Optimum conditions for improved, orthokinetic flocculation performance of negatively charged clay particles, reflecting faster settling flocs comprised (i) coagulation, (ii) moderate agitation rate, (iii) shorter agitation time, and (iv) anionic rather than non-ionic PAM. The optimum dewatering rates were significantly higher than those produced by standard, manual-mixing flocculation techniques (plunging and cylinder inversion) commonly used in industry for flocculant trials. The optimum flocculation conditions did not, however, have a significant impact on the final sediment solid content of 20-22 wt%. Further application of shear to pre-sedimented pulps improved consolidation by 5-7 wt% solid. Higher shear yield stresses and greater settling rates were displayed by PAM A based than PAM N based pulps and this is attributed to the former's more expanded interfacial conformation and greater clay particles bridging ability. It appears that the intrinsic clay particles' physico-chemical properties and interactions limit compact pulp consolidation.     

聚丙烯酰胺稀溶液的分子模拟

聚丙烯酰胺(PAM)是一类重要的线性水溶性聚合物,具有"百业助剂"之称,因此对其溶液性质的研究意义重大.在溶液质量浓度约为1g·mL-1的基础上,分别构建了含有不同水分子数的溶液模型.采用分子动力学(MD)方法模拟分析了不同温度下非离子型的聚丙烯酰胺(PAM-H)和阴离子型的聚丙烯酰胺(HPAM)在纯水溶液及含不同质量分数NaCl的水溶液中的回旋半径(Rg).结果发现,不同温度下PAM-H和HPAM的抗盐性能的模拟结果与实验数据基本吻合,水分子数不同的溶液模型所得模拟结果趋势没有明显变化,为了提高模拟效率,选取含有2000个水分子的溶液模型分析HPAM链中氧负离子及氧原子的径向分布函数,从微观结构模拟说明了HPAM水溶液粘度随NaCl质量分数增加而减小,且HPAM比PAM-H具有较好的增粘效果及较差的抗盐性能的原因.     

Effect of hydrophobically modified polymer on salt-induced structural transition in microemulsions

The phase boundaries of the middle-phase microemulsion for NaCl/SDS/H2O/1-heptane/1-pentanol systems in the absence of polymer and in the presence of unmodified poly(acrylamide) (PAM) and hydrophobically modified poly(acrylamide) (HMPAM) have been determined at varying salt concentrations. These three middle-phase microemulsions (with HMPAM, with PAM, and without polymer) were studied using interfacial tension measurement, steady-state fluorescence, and time-resolved fluorescence quenching. Compared to the polymer-free system and the system with PAM, the addition of HMPAM significantly enlarges the range of the salt concentrations for the formation of the middle-phase microemulison and causes both the excess oil and aqueous phases to increase in volume at the expense of the middle-phase microemulsion. For the middle-phase microemulsion with HMPAM, the interfacial tensions of the microemulsion phase with the excess oil phase and with the excess aqueous phase are all ultralow and exhibit higher values than those with PAM and without polymer. At the same salt concentration, the apparent surfactant aggregation number in the middle-phase microemulsion with HMPAM has the smallest value among these three systems. All results indicate that the strong interaction of surfactant with hydrophobically modified polymer has a large effect on the formation and properties of the middle-phase microemulsion.     

Hydrophobically Associating Polyacrylamides Prepared by Inverse Suspension Polymerization: Synthesis,Characterization and Aqueous Solution Properties

Hydrophobically associating polyacrylamides (HAPAMs) were synthesized via inverse suspension polymerization using ammonium persulphate (APS)/tertramethylethylenediamine (TEMED) as the redox initiators, 2-methacryloyloxyethyl n-alkyl dimethyl ammonium bromide (DM-n, n = 8, 12, 16) as the hydrophobic comonomers. The structures of the copolymers were elucidated by FT-IR and ionic chromatographic analysis, respectively. The morphology and particle size of the resultant HAPAMs were characterized by scanning electronic microscope (SEM) and laser particle size analyzer, which revealed that spherical particles were formed and the particle size exhibited Gaussian distribution centered from 25 μ m to 162 μ m. Furthermore, the solution properties of the copolymers were studied with viscometry and the results showed that HAPAMs synthesized under optimal conditions exhibited an obvious viscosity enhancement in aqueous solution and excellent salt-tolerant capability in brine.     

Interaction of Polyacrylamide with Conventional Anionic and Gemini Anionic Surfactants

The interaction of polyacrylamide (PAM) with conventional anionic (sodium lauryl sulphate, NaLS) and gemini anionic (sodium salt of bis(1-dodecenyl succinimic acid), represented as NaBDS) surfactants has been studied in alkaline medium by electrical conductance and surface-tension measurements at 35⁰C in order to compare the behavior of two surfactants toward the polymer. The surface parameters and thermodynamic parameters have been evaluated and compared. The results indicate more readily interaction of anionic gemini surfactant with the polymer (PAM).     

聚丙烯酰胺及水解聚丙烯酰胺的粘度对加盐浓度及时间的依赖性

高分子量聚丙烯酰胺(PAM)和部分水解聚丙烯酰胺(HPAM)是目前世界上生产量最大的合成水溶性高分子。由于它们在水溶液中只要很低的浓度就具有高粘度的特件,故广泛用作提高石油采收率的堵漏剂和增粮剂。     

Molecular weight control of polyacrylamide with sodium formate as a chain‐transfer agent: Characterization via size exclusion chromatography/multi‐angle laser light scattering and determination of chain‐transfer constant

We discuss the synthesis and characterization of polyacrylamide (PAM) homopolymers with carefully controlled molecular weights (MWs). PAM was synthesized via free‐radical solution polymerization under conditions that yield highly linear polymer with minimal levels of hydrolysis. The MW of the PAM homopolymers was controlled by the addition of sodium formate (NaOOCH) to the polymerization medium as a conventional chain‐transfer agent. MWs and polydispersity indices (PDIs) were determined via size exclusion chromatography/multi‐angle laser light scattering analysis; for polymerizations carried out to high conversion, PAM MWs ranged from 0.23 to 6.19 × 10⁶ g/mol, with most samples having PDI ≈2.0. Zero‐shear intrinsic viscosities of the polymers were determined via low‐shear viscometry in 0.514 M NaCl at 25 °C. Data derived from the polymer characterization were used to determine the chain‐transfer constant to NaOOCH under the given polymerization conditions and to calculate Mark–Houwink–Sakurada K and a values for PAM in 0.514 M NaCl at 25 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 560–568, 2003     

Mussel-Inspired Adhesive,Antibacterial, and Stretchable Composite Hydrogel for Wound Dressing

Hydrogels have attracted extensive attention in the field of biomedicine because of their similar structure to extracellular matrix (ECM) and good biocompatibility. However, the adhesiveness, mechanical properties, and antibacterial properties of conventional hydrogels are not satisfactory. In this study, multifunctional chitosan/polydopamine/polyacrylamide (CS/PDA/PAM) hydrogels are prepared through a nature-inspired strategy. The catechol group of polydopamine (PDA) component endows CS/PDA/PAM hydrogels with tissue adhesion and self-healing properties. The introduction of chitosan (CS) not only greatly improves antibacterial ability, but also enhances the mechanical properties of CS/PDA/PAM hydrogels. Skin wound healing experiments show that CS/PDA/PAM hydrogels could accelerate skin tissue regeneration and promote wound healing. Therefore, CS/PDA/PAM hydrogels have great potential in the application of new wound dressings.