Single‐Electron‐Transfer‐Induced Coupling of Arylzinc Reagents with Aryl and Alkenyl Halides

Arylzinc reagents, prepared from aryl halides/zinc powder or aryl Grignard reagents/zinc chloride, were found to undergo coupling with aryl and alkenyl halides without the aid of transition‐metal catalysis to give biaryls and styrene derivatives, respectively. In this context, we have already reported the corresponding reaction using aryl Grignard reagents instead of arylzinc reagents. Compared with the Grignard cross‐coupling, the present reaction features high functional‐group tolerance, whereby electrophilic groups such as alkoxycarbonyl and cyano groups are compatible as substituents on both the arylzinc reagents and the aryl halides. Aryl halides receive a single electron and thereby become activated as the corresponding anion radicals, which react with arylzinc reagents, thus leading to the cross‐coupling products.     

Reinvestigation of the grignard reactions with formic acid. A convenient method for preparation of aldehydes

Grignard reagents react with formic acid in tetrahydrofuran to produce aldehydes in relatively good yields Various aldehydes such as alkyl, aryl, allyl, benzyl and vinyl aldehydes were prepared from the corresponding Grignard reagents. The reaction with vinyl Grignard reagents proceeded with retention of configuration.     

Addition of grignard reagents to aryl acid chlorides: an efficient synthesis of aryl ketones

[chemical reaction: see text]. Direct addition of Grignard reagents to acid chlorides in the presence of bis[2-(N,N-dimethylamino)ethyl] ether proceeds selectively to provide aryl ketones in high yields. A possible tridentate interaction between Grignard reagents and bis[2-(N,N-dimethylamino)ethyl] ether moderates the reactivity of Grignard reagents, preventing the newly formed ketones from nucleophilic addition by Grignard reagents.     

Michael addition of Grignard reagents to tetraethyl ethenylidenebisphosphonate

Tetraethyl ethenylidenebisphosphonate can undergo facile Michael type addition reaction with simple Grignard reagents to give alkyl, arylalkyl, aryl C-substituted methylene bisphosphonates. This addition easily occurs even if funtionalised Grignard reagents are used.     

Uncatalysed coupling of an activated aryl chloride with aryllithium and aryl Grignard reagents

Substitution of the chloro group in 2-(2-chlorophenyl)-4,4-dimethyl-2-oxazoline to afford biaryls occurs upon reaction with either aryllithium reagents or aryl Grignard reagents. The reactions with Grignard reagents occur under similar conditions to a previously reported manganese-catalysed procedure. The reactions with lithium reagents, whilst not always affording greater yields of product than the Grignard reagents, involve much shorter reaction times and afford yields, which are comparable with those obtained from the corresponding fluoro derivative.     

Synthesis of N,N‐Dimethylamines via Barbier–Grignard‐Type Electrophilic Amination

Aryl Grignard reagents react with N,N‐dimethyl O‐(mesitylenesulfonyl)hydroxylamine in THF under Barbier conditions at room temperature and give N,N‐dimethylanilines with high yields in a 2‐h reaction. The amination yield of in situ Grignard reagents were not lower than those of preformed aryl Grignard reagents. In situ cycloalkyl‐, allyl‐, and benzylmagnesium bromides did not react with N,N‐dimethyl O‐(mesitylenesulfonyl)hydroxylamine, except that amination of in situ n‐hexylmagnesium bromide resulted in a medium yield. Grignard–Barbier‐type amination of aryl bromides with N,N‐dimethyl O‐(mesitylenesulfonyl)hydroxylamine provides a new alternative route for the synthesis of N,N‐dimethylanilines.     

1,6-Asymmetric induction during the conjugate addition of arylcopper reagents to a chiral sulfinyl-substituted pyrrolyl alpha,beta-unsaturated amide.

The asymmetric conjugate addition of arylcopper reagents derived from aryl Grignard reagents and copper(I) iodide to a chiral 1-[2-(p-tolylsulfinyl)]pyrrolyl cinnamide proceeded smoothly to give (3R)-adducts with high diastereoselectivities (> or =92% de) in high yields. Conjugate additions either of the cinnamide with the alkyl Grignard reagent-copper(l) iodide combination or of the crotonamide derivative with aryl Grignard reagent-copper(l) iodide gave moderate to good diastereoselectivities. With these sulfinyl pyrrolyl alpha,beta-unsaturated amides, the chiral auxiliary was efficiently recovered without any loss of optical purity after asymmetric conjugate addition.     

Direct Addition of Grignard Reagents to Aliphatic Carboxylic Acids Enabled by Bulky turbo-Organomagnesium Anilides

The synthesis of ketones through addition of organometallic reagents to aliphatic carboxylic acids is a straightforward strategy that is limited to organolithium reagents. More desirable Grignard reagents can be activated and controlled with a bulky aniline-derived turbo-Hauser base. This operationally simple procedure allows the straightforward preparation of a variety of aliphatic and perfluoroalkyl ketones alike from functionalized alkyl, aryl and heteroaryl Grignard reagents.     

Ligand exchange reactions of aryl pyridyl sulfoxides with grignard reagents: Convenient preparation of 3- and 4-pyridyl grignard reagents and examination of the leaving abilities of pyridyl anions

Aryl 3- and 4-pyridyl sulfoxides undergo ligand exchange in reactions with aryl Grignard reagents to generate 3- and 4-pyridyl Grignard reagents, which, upon treatment with aldehydes or ketones, give the corresponding addition products in moderate-to-good yields. The mechanism for the exchange reaction was investigated by treating optically active 3- and 4-pyridyl p-tolyl sulfoxides with a phenyl Grignard reagent. Inversion of the configuration of the sulfur atom was the stereochemical result of the reactions. In the reactions of phenyl 2-pyridyl sulfoxide with Grignard reagents, the leaving ability of the 2-pyridyl group competes with that of the phenyl group. Both the experimental and MO calculated enthalpy values for deprotonation of α-, β-, and γ-protons of pyridine in the gas phase [1] are in accordance with the following order of the leaving abilities of aryl and pyridyl Grignard reagents: 4-PyMgBr > 3-PyMgBr » PhMgBr > p-TolMgBr > 2-PyMgBr.     

Regioselective arylation of 3-bromopyridine

The addition of aryl Grignard reagents to the 1-phenoxycarbonyl salt of 3-bromopyridine affords 2-aryl-5-bromo-1-phenoxycarbonyl-1,2-dihydropyridines and 4-aryl-3-bromo-1-phenoxycarbonyl-1,4-dihydropyridines. The crude dihydropyridines were aromatized with o-chloranil in refluxing toluene to give 4- and 6-aryl-3-bromopyridines. The regioselectivity of this two-step process, 6- vs. 4-substitution, was examined and found to be dependent upon the structure of the Grignard reagent. Unhindered aryl Grignard reagents, e.g., phenyl and 2-naphthyl, gave mainly 6-aryl-3-bromopyridines (49-52%) along with 9% of the 4-substituted isomer and less than 4% of the 2-aryl-3-bromopyridine. Hindered aryl Grignard reagents, e.g., o-tolyl and 1-naphthyl, are less regioselective. When a catalytic amount of cuprous iodide is present during the Grignard reaction, nearly exclusive 1,4-addition results. The crude 4-aryl-3-bromo-1,4-dihydropyridines were aromatized with p-chloranil to provide 4-aryl-3-bromopyridines in good yield and high isomeric purity. The sequential use of the cuprous iodide-catalyzed Grignard reaction and the “normal” Grignard reaction provided a regiospeci-fic synthesis of 3-bromo-6-(p-methoxyphenyl)-4-phenylpyridine from 3-bromopyridine.     

Grignard试剂与α-肉桂酰基环二硫缩烯酮的区域选择性加成反 应

乙基、丙基、丁基、苯基和苄基卤化镁等Grignard试剂与具有三个亲电中心的α-肉桂酰基环二硫缩烯酮类化合物2反应,加成反应发生在2中与芳基相邻的碳原子上,生成共轭加成产物3,反应具区域选择性。     

Direct Arylation/Alkylation/Magnesiation of Benzyl Alcohols in the Presence of Grignard Reagents via Ni-, Fe-, or Co-Catalyzed sp(3) C-O Bond Activation

Direct application of benzyl alcohols (or their magnesium salts) as electrophiles in various reactions with Grignard reagents has been developed via transition metal-catalyzed sp(3) C-O bond activation. Ni complex was found to be an efficient catalyst for the first direct cross coupling of benzyl alcohols with aryl/alkyl Grignard reagents, while Fe, Co, or Ni catalysts could promote the unprecedented conversion of benzyl alcohols to benzyl Grignard reagents in the presence of (n)hexylMgCl. These methods offer straightforward pathways to transform benzyl alcohols into a variety of functionalities.     

Grignard Reactions Involving Halogenated Pyrimidines

Generally, there are two pathways that involve Grignard reagents and halogenated pyrimidines. The more common approach shows cross‐coupling reactions that utilize a Grignard reagent, either alkyl or aryl, with a variety of halogenated pyrimidines. Typically, these reactions are catalyzed by Fe, Co, Ni, Pd, Mn, or Zn species. Alternatively, but to a lesser degree, halogenated pyrimidines form pyrimidyl Grignard reagents, which then further react either in a cross‐coupling manner or via a standard addition process. Finally, there are a few examples in which Grignard reagents react with pyrimidines via an addition process that does not involve a halogen.     

Unexpected formation of aryl dialkyl carbinol as a side product from the reaction of methoxyarylaldehydes with Grignard reagents

In the attempted formation of secondary aryl alkyl carbinols from the reaction of methoxyarylaldehydes with Grignard reagents, aryl dialkyl carbinols were formed as unexpected side products. A mechanism for their formation is proposed.     

Silver-catalyzed cross-coupling reactions of alkyl bromides with alkyl or aryl Grignard reagents

Treatment of secondary or tertiary alkyl bromides with alkyl Grignard reagents in the presence of catalytic amounts of silver bromide and potassium fluoride in CH₂Cl₂ afforded the corresponding cross-coupling products in reasonable yields. Moreover, silver showed catalytic activity for the cross-coupling reactions of alkyl bromides with aryl Grignard reagents.     

Tariazenes of the benzothiazole series containing aliphatic groups

Reaction of 2-methyl-6-azidobenzothiazole with Grignard reagents gives alkyl(aryl)-(2-methylbenzothiazolyl-6)triazenes.     

Tariazenes of the benzothiazole series containing aliphatic groups

Reaction of 2-methyl-6-azidobenzothiazole with Grignard reagents gives alkyl(aryl)-(2-methylbenzothiazolyl-6)triazenes.     

Efficient synthesis of sterically crowded biaryls by palladium-phosphinous acid-catalyzed cross-coupling of aryl halides and aryl grignards

A series of sterically hindered biaryls have been obtained by palladium- and nickel-phosphinous acid-catalyzed Kumada-Corriu cross-coupling of ortho-substituted aryl halides and Grignard reagents. This method allows formation of di- and tri-ortho-substituted biaryls in 87-98% yield under mild reaction conditions even when electron-rich aryl chlorides are used. The reaction also proceeds with aryl iodides at -20 degrees C, and under these conditions, functional groups that are generally not compatible with Grignard reagents are tolerated.     

A Convenient One Pot Synthesis of Esters of Carboxylic Acids from Alkyl or Aryl Halides

Esters of carboxylic acids were readily synthesized from alkyl or aryl halides by reacting the corresponding Grignard reagents with dimethyl, diphenyl or ethylene carbonates.     

An unprecedented iron-catalyzed cross-coupling of primary and secondary alkyl Grignard reagents with non-activated aryl chlorides

The use of N-heterocyclic carbene ligands in the iron-catalyzed cross-coupling of alkyl Grignards has allowed, for the first time, coupling of non-activated, electron rich aryl chlorides. Surprisingly, the tetrahydrate of FeCl₂ was found to be a better pre-catalyst than anhydrous FeCl₂. Primary Grignard reagents coupled in excellent yields while secondary Grignard reagents coupled in modest yields. The use of acyclic secondary Grignard reagents resulted in the formation of isomers in addition to the desired product. These isomeric products were formed via reversible β-hydrogen elimination, indicating that the cross-coupling proceeds through an ionic pathway.