A variable-temperature diffuse reflectance infrared fourier transform spectroscopy study of the binding of water and pyridine to the surface of acid-activated metakaolin

Four metakaolins were prepared by heating a Spanish kaolin at 600, 700, 800, and 900 degrees C for 10 h. Following preliminary optimization, these metakaolins were acid activated in 6 M hydrochloric acid at 90 degrees C for 6 h; the samples calcined at 600, 700, and 800 degrees C produced the highest surface area solids and were selected for further study. Variable-temperature diffuse reflectance infrared Fourier transform spectroscopy analysis of the resulting acid-activated metakaolins (AAMKs) identified a wide range of hydrogen bond strengths in adsorbed water at room temperature. Above 300 degrees C it was possible to fit the broad hydroxyl stretching band to seven contributing components at 3730, 3700, 3655, 3615, 3583, 3424, and 3325 cm(-1). As the sample temperature was increased, the 3730 cm(-1) band increased in intensity as the water hydrogen bonded to AlOHAl was thermally desorbed. The other six bands decreased in intensity. The spectra of adsorbed pyridine indicated the presence of both Br?nsted and Lewis acid sites on the surface of the air-dried AAMKs. Preheating the AAMK at 200 degrees C prior to pyridine sorption reduced the number of Br?nsted acid sites and increased the number of thermally stable Lewis acid sites. A reduction in the amount of adsorbed pyridine after pretreating the AAMK at 400 degrees C was tentatively attributed to a reduction in surface area. This was reflected in fewer thermally stable Lewis acid sites in the AAMK pretreated at 400 degrees C compared to the number present in the sample pretreated at 200 degrees C.     

Synthesis of functionalized porphyrins as oxygen ligand receptors

Oxophilic synthetic receptors were designed and synthesized using a porphyrin scaffold, with the aim of constructing a preorganized complementary binding site for phenols and carbohydrates. We pursued three strategies for phenol recognition: (1) Lewis acid/Lewis base combinations serving as a hydrogen bond donor and acceptor for the OH group, (2) Lewis base/pi-pi stacking, targeting both the OH group and the aromatic moiety of phenols, and (3) exchange of the axial hydroxyl ligand on a trivalent and oxophilic metal center of aluminum porphyrin. For the recognition of acidic phenols, the most promising recognition motif was Lewis base/pi-pi stacking, which can bind to phenols with a hydrogen bond and pi-pi stacking interactions. [5-(8-Quinolyl)-10,15,20-triphenylporphyrinato]zinc binds to p-nitrophenol with a binding constant of 540 M(-)(1) in CHCl(3) at 25 degrees C. For carbohydrate recognition, we designed the metalloporphyrin receptor having 8-quinolyl groups and o-carbomethoxymethoxyphenyl groups, where these Lewis basic parts serve as the cooperative hydrogen bonding sites for the hydroxyl groups of glucoside. The receptor binds to beta-octyl glucoside with a binding constant of 7.35 x 10(4) M(-)(1) in CHCl(3) at 15 degrees C, demonstrating importance of formation of a highly ordered hydrogen bonding network between the receptor and the guest. These binding features have significant implications for the rational design of oxophilic artificial receptors.     

ZnHZSM－5上脱氢环化芳构化过程的探讨

以正己烷、环己烷、甲基环戊烷、１－己烯和环己烯等分子探针反应，考察了单Ｂ酸型ＨＺＳＭ－５、Ｚｎ－Ｌ酸型ＺｎＮａＺＳＭ－５和双中心型ＺｎＨＺＳＭ－５（Ｂ酸和Ｚｎ－Ｌ酸）催化剂的性能，探讨了Ｂ酸中心和Ｚｎ－Ｌ酸中心在芳构化过程中的作用．实验结果表明，Ｂ酸中心有利于环化，Ｌ酸中心有利于脱氢芳构化．单具Ｂ酸或Ｚｎ－Ｌ酸中心催化剂上，直链烃分子的芳构化性能较差，当两种中心同时存在时，双功能互相促进，加快芳构化过程．文中还对Ｃ６分子脱氢环化芳构化过程进行了讨论     

Intramolecular diels-alder reaction by self-assembly of the components on a lewis acid template

Diels-Alder reactions of 2,4-hexadienol or its O-methyl ether with acrylate derivatives at 120 degrees C give mixtures of the four possible adducts with low selectivity. At ambient temperature and in the presence of Mg(II) or Al(III) Lewis acids, reactions of the dienol (but not the ether) are highly selective. Control experiments suggest that the Lewis acid serves both to tether the diene and dienophile and to induce an "intramolecular" reaction of the resulting "self-assembled" intermediate.     

Selective Activation of Aromatic Aldehydes Promoted by Dispersion Interactions: Steric and Electronic Factors of a π-Pocket within Cage-Shaped Borates for Molecular Recognition

Selective bond formations are one of the most important reactions in organic synthesis. In the Lewis acid mediated electrophile reactions of carbonyls, the selective formation of a carbonyl–acid complex plays a critical role in determining selectivity, which is based on the difference in the coordinative interaction between the carbonyl and Lewis acid center. Although this strategy has attained progress in selective bond formations, the discrimination between similarly sized aromatic and aliphatic carbonyls that have no functional anchors to strongly interact with the metal center still remains a challenging issue. Herein, this work focuses on molecular recognition driven by dispersion interactions within some aromatic moieties. A Lewis acid catalyst with a π-space cavity, which is referred to as a π-pocket, as the recognition site for aromatic carbonyls is designed. Cage-shaped borates 1 B with various π-pockets demonstrated significant chemoselectivity for aromatic aldehydes 3 b – f over that of aliphatic 3 a in competitive hetero-Diels–Alder reactions. The effectiveness of our catalysts was also evidenced by intramolecular recognition of the aromatic carbonyl within a dicarbonyl substrate. Mechanistic and theoretical studies demonstrated that the selective activation of aromatic substrates was driven by the preorganization step with a larger dispersion interaction, rather than the rate-determining step of the C−C bond formation, and this was likely to contribute to the preferred activation of aromatic substrates over that of aliphatic ones.     

Small organoselenium molecules. 1. Dimethyl selenoxide: structure,complexation, and gas-phase transformation

For the first time the structural characterization of dimethyl selenoxide coordinated to metal complexes has been performed confirming the Me(2)SeO arrangement assigned by spectroscopic techniques for the molecule in solution and solid state. The structure of Me(2)SeO is trigonal pyramidal with Se-O and Se-C bond lengths of 1.70 and 1.92 A, respectively, and sigma(X-Se-Y) = 301 degrees. As a ligand, dimethyl selenoxide was found to bind to the rhodium centers of various Lewis acidity strengths by using only its oxo functionality in both terminal and bridging fashions. This O-directed coordination preference contrasts with an ambidentate (-S and -O) binding character revealed by dimethyl sulfoxide upon formation of analogous donor-acceptor complexes. The study of dimethyl selenoxide in the gas phase at 135-140 degrees C resulted in a thermal degradation of this molecule. The major decomposition product has been entrapped by a metal complex and identified as dimethyl selenide. The isolation of the coordinated Me(2)Se fragment clearly demonstrates that the Me(2)SeO molecule is less thermally stable than Me(2)SO, which under similar reaction conditions shows no sign of decomposition at temperatures up to 160 degrees C.     

Formation of 3-aryl-5-nitroisocoumarins from 5-nitroisocoumarins and aromatic acyl chlorides under Friedel-Crafts conditions

Treatment of 5-nitroisocoumarin with aromatic acyl chlorides under Friedel-Crafts conditions gives 3-aryl-5-nitroisocoumarins, rather than the expected 4-acyl-5-nitroisocoumarins. This procedure was optimized for reaction temperature (150 degrees C), solvent (nitrobenzene), and Lewis acid (SnCl4). Reaction of 5-nitroisocoumarin with [13C]-carbonyl benzoyl chloride under the optimum conditions gave 5-nitro-3-phenylisocoumarin in which the 13C is located at the 3-C of the heterocycle, indicating that the benzoyl carbon framework is incorporated intact.     

Hydrothermal C-C bond formation and disproportionation of acetaldehyde with formic acid

Reaction pathways and kinetics of C2 (carbon-two) aldehyde, acetaldehyde (CH3CHO), and formic acid HCOOH or HOCHO, are studied in neutral and acidic subcritical water at 200-250 degrees C. Acetaldehyde is found to exhibit (i) the acid-catalyzed C-C bond formation between acetaldehyde and formic acid, which generates lactic acid (CH3CH(OH)COOH), (ii) the cross-disproportionation, where formic acid reduces acetaldehyde into ethanol, and (iii) the aldol condensation. The lactic acid formation is a green C-C bond formation, proceeding without any organic solvents or metal catalysts. The new C-C bond formation takes place between formic acid and aldehydes irrespective of the presence of alpha-hydrogens. The hydrothermal cross-disproportionation produces ethanol without base catalysts and proceeds even in acidic condition, in sharp contrast to the classical base-catalyzed Cannizzaro reaction. The rate constants of the reactions (i)-(iii) and the equilibrium constant of the lactic acid formation are determined in the temperature range of 200-250 degrees C and at HCl concentrations of 0.2-0.6 M (mol/dm(3)). The reaction pathways are controlled so that the lactic acid or ethanol yield may be maximized by tuning the reactant concentrations and the temperature. A high lactic acid yield of 68% is achieved when acetaldehyde and formic acid are mixed in hot water, respectively, at 0.01 and 2.0 M in the presence of 0.6 M HCl at 225 degrees C. The ethanol yield attained 75% by the disproportionation of acetaldehyde (0.3 M) and formic acid (2.0 M) at 225 degrees C in the absence of added HCl.     

Surface characterization and catalytic evaluation of manganese nodule leached residue toward oxidation of benzene to phenol

Water washed manganese nodule leached residue (WMNLR) calcined at different temperatures was characterized by XRD, FTIR, TG-DTA, surface area, surface oxygen, and surface acid sites. Surface area, surface oxygen, surface hydroxyl group, and surface acid sites increase up to 400 degrees C and then decrease with further rise in calcination temperature up to 700 degrees C. The catalytic activity of the calcined samples was tested for single-step oxidation of benzene to phenol using hydrogen peroxide as the oxidant and acetic acid as the solvent at room temperature. The influence of various reaction parameters such as solvent, concentration of solvent, oxidant amount, time, temperature, and catalyst amount was studied to optimize the reaction conditions. WMNLR calcined at 400 degrees C showed the highest catalytic activity towards oxidation of benzene with 12.7% conversion and 98% selectivity.     

Synthesis and characterization of mesoporous silica from selectively acid-treated saponite as the precursors

Mesoporous silicas were synthesized by hydrothermal treatment of selectively acid-treated saponite (an ideal structural formula: Na(1/3)Mg(3)(Si(11/3)Al(1/3))O(10)(OH)(2)), having a 2:1 type layered structure as the silica source and its porous properties were examined and compared with that from kaolinite (an ideal structural formula: Al(2)Si(2)O(5)(OH)(4)), having a 1:1 type layered structure. Synthetic saponite was selectively leached in H(2)SO(4) solutions with various concentrations (0.05-1 M) at 70 degrees C for 0.5 h. The resulting products (precursors) were mixed with cetyltrimethylammonium bromide (CTABr), NaOH and H(2)O, hydrothermally treated at 110 degrees C and removed the CTABr by calcining at 560 degrees C. A hexagonal mesoporous phase was obtained with higher Si/(Al(+Mg)) ratios of the resulting precursors. The XRD patterns of these products show the peaks assigned by a hexagonal lattice with a(0)=4.0-4.6 nm and the crystallinity becomes higher with higher Si/(Al(+Mg)) ratios of the precursors. The specific surface area (S(BET)) values of the present mesoporous silicas range from 800 to 1100 m(2)/g at CTABr/precursor=0.1 and although they are not as high as those from precursors prepared from calcining and acid-treatment of kaolinite (1420 m(2)/g), they are increased to 1400-1500 m(2)/g by increasing the ratio CTABr/precursor 0.2. The reason for the difference in the optimum preparation conditions between saponite and kaolinite may be attributed to the difference in the linkage of the SiO(4) tetrahedra in these precursors (i.e. layered or framework structures), which result in great differences in the selective leaching rates and structures of the resulting silica-rich products.     

Dual Lewis acid-Lewis base activation in enantioselective cyanation of aldehydes using acetyl cyanide and cyanoformate as cyanide sources

Dual activation by a chiral Lewis acid and an achiral or chiral Lewis base enabled cyanation of both aromatic and aliphatic aldehydes with acetyl cyanide and ethyl cyanoformate to provide direct access to O-acetylated and O-alkoxycarbonylated cyanohydrins, respectively, under mild conditions. With a combination of a Ti-salen catalyst and Et3N, benzaldehyde was converted to the O-acetylated cyanohydrin with 94% ee within 10 h at -40 degrees C in 89% isolated yield.     

Cross- and Multi-Coupling Reactions Using Monofluoroalkanes

Carbon-fluorine bonds are stable and have demonstrated sluggishness against various chemical manipulations. However, selective transformations of C−F bonds can be achieved by developing appropriate conditions as useful synthetic methods in organic chemistry. This review focuses on C−C bond formation at monofluorinated sp³-hybridized carbons via C−F bond cleavage, including cross-coupling and multi-component coupling reactions. The C−F bond cleavage mechanisms on the sp³-hybridized carbon centers can be primarily categorized into three types: Lewis acids promoted F atom elimination to generate carbocation intermediates; nucleophilic substitution with metal or carbon nucleophiles supported by the activation of C−F bonds by coordination of Lewis acids; and the cleavage of C−F bonds via a single electron transfer. The characteristic features of alkyl fluorides, in comparison with other (pseudo)halides as promising electrophilic coupling counterparts, are also discussed.     

Liquid-liquid extraction separation and sequential determination of plutonium and americium in environmental samples by alpha-spectrometry

A procedure is described by which plutonium and americium can be determined in environmental samples. The sample is leached with nitric acid and hydrogen peroxide, and the two elements are co-precipitated with ferric hydroxide and calcium oxalate. The calcium oxalate is incinerated at 450 degrees and the ash is dissolved in nitric acid. Plutonium is extracted with tri-n-octylamine solution in xylene from 4M nitric acid and stripped with ammonium iodide/hydrochloric acid. Americium is extracted with thenoyltrifluoroacetone solution in xylene at pH 4 together with rare-earth elements and stripped with 1M nitric acid. Americium and the rare-earth elements thus separated are sorbed on Dowex 1 x 4 resin from 1M nitric acid in 93% methanol, the rare-earth elements are eluted with 0.1M hydrochloric acid/0.5M ammonium thiocyanate/80% methanol and the americium is finally eluted with 1.5M hydrochloric acid in 86% methanol. Plutonium and americium in each fraction are electro-deposited and determined by alpha-spectrometry. Overall average recoveries are 81% for plutonium and 59% for americium.     

La／HZSM—5催化剂上丙烷的芳构化反应研究

采用浸渍法和离子交换法制备了La/HZSM-5分子筛催化剂,用于丙烷芳构化反应,利用XRD,SPS,FT－IR,NH3－TPD技术考察了La对HZSM－5分子筛结构和表面酸性的影响,引入La后能显著提高HZSM－5的丙烷芳构化活性,其中由离子交换法得到的催化剂效果最佳,在反应温度550度,空速600h^-1条件下,丙烷转化率和芳烃选择性分别达到94．58％,68．99％,在La/HZSM-5中分子筛结晶度下降,B酸中心减少,L酸中心增多,离子交换法制备的催化剂比浸渍法催化剂的这种变化更显著,同时更有利于La3 进入分子筛孔道内,并与分子筛产生强相互作用,新增加的L酸中心可能是芳构化反应的活性中心。     

First highly stereoselective synthesis of anti-alpha-trifluoromethyl-beta-amino acid derivatives

The Reformatsky-type reaction of 2-bromo-3,3,3-trifluoropropanoic imide with various types of imines, in the presence of ZnBr2 as a Lewis acid in THF at 0 degrees C for 3 h, gave the corresponding alpha-trifluoromethyl-beta-amino acid derivatives in a highly anti-selective manner.     

乙烷部分氧化制C2氧化物用Fe－Al－P－O催化剂的研究Ⅱ．Fe－Al－P－O催化剂的吸附及催化性能

 用化学吸附－IR，化学吸附－TPD和微反技术研究了超细Fe－Al－P－O催化剂的化学吸附性能及对乙烷部分氧化反应的催化性能．结果表明，乙烷能够以－CH3中的H原子吸附于催化剂表面P＝O键的端氧上形成分子吸附态，并且随着吸附温度的升高，对乙烷的吸附强度逐渐增大；乙烯则主要是以C＝C双键吸附在催化剂的Lewis酸位Fe3＋上．乙烷部分氧化反应的主要产物为乙烯和COx，但在反应物中引入氢的条件下，乙烷部分氧化反应的性能大为改善，并可生成乙醇和乙醛等含氧化合物．     

Coupling sol-gel synthesis and microwave-assisted techniques: a new route from amorphous to crystalline high-surface-area aluminium fluoride

A non-aqueous sol-gel Al-based fluoride has been subjected to the microwave solvothermal process. The final material depends on the temperature heat treatment used. Three types of material have been prepared: 1) for low temperature heat treatment (90 degrees C) X-ray amorphous alkoxy fluoride was obtained; 2) for the highest temperature used (200 degrees C) the metastable form beta-AlF3 was obtained with a very large surface area of 125 m2 g(-1). The mechanism of the amorphous=crystalline transformation has been rationalised by the occurrence of a decomposition reaction of the gel fluoride induced by the microwave irradiation. 3) Finally, at intermediate temperature (180 degrees C) a multi-component material mixture exhibiting a huge surface area of 525 m2 g(-1) has been obtained and further investigated after mild post-treatment fluorination using F2 gas. The resulting aluminium-based fluoride still possesses a high-surface-area of 330 m2 g(-1). HRTEM revealed that the solid is built from large particles (50 nm) identified as alpha-AlF3, and small ones (10 nm), relative to an unidentified phase. This new high-surface-area material exhibits strong Lewis acidity as revealed by pyridine adsorption and catalytic tests. By comparison with other materials, it has been shown that whatever the composition/structure of the Al-based fluoride materials, the number of strong Lewis acid sites is related to the surface area, highlighting the role of surface reconstruction occurring on a nanoscopic scale on the formation of the strongest Lewis acid sites.     

V2O5/SiO2催化剂的异丁烷选择氧化反应性能

 采用溶胶－凝胶法和浸渍法制备了V2O5／SiO2催化剂,并用XRD,IR,TPD和活性评价等手段对催化剂的表面构造、化学吸附性能和异丁烷选择氧化反应性能进行了研究．结果表明：催化剂表面由Lewis碱位V＝O双键的端氧和Lewis酸位V5＋构成,异丁烷分子主要通过甲基中的H双位吸附在催化剂表面的Lewis碱位上,异丁烯分子可通过甲基的H吸附在催化剂表面的Lewis碱位,也可通过C＝C双键吸附在催化剂表面的Lewis酸位上．在常压条件下,异丁烷选择氧化产物主要有异丁烯、甲基丙烯醛和甲基丙烯酸,其中深度氧化产物CO2主要由通过C＝C吸附的异丁烯继续反应生成．     

IR-spectroscopic study of lewis acid centers on polyzirconiummethylsiloxanes

Acid centers on the surface of polyzirconiummethylsiloxanes (PZMS) containing 5 and 10% ZrO₂ were studied by diffuse-reflectance IR-spectroscopy. Deuterated acetonitrile adsorbed at room temperature at a 96 torr saturated vapor pressure was used as a probe-molecule for acid centers. It was shown that zirconium ions were not built into the matrix but were situated predominantly on the surface of the siliconoxygen framework of silica gels. The introduction of zirconium ions into the polymethylsiloxane matrix at the stage of sol formation caused the appearance of Lewis acid centers (coordinatively unsaturated zirconium ions) on the surface of PZMS along with centers of the physical adsorption of CD₃CN.