Spectral analysis of acetylcholine halides by density functional theory calculations

The optimized molecular structures, vibrational frequencies and ¹H and ¹³C NMR chemical shifts of acetylcholine halides (F, Cl, and Br) have been investigated using density functional theory (B3LYP) method with 6-311G(d) basis set. The comparison of their experimental and calculated IR, R and NMR spectra of the compounds has indicated that the spectra of three optimized minimum energy conformers can simultaneously exist in one experimental spectrum. Thus, it was concluded that the compounds simultaneously exist in three conformations in the ground state. The calculated optimized geometric parameters (bond lengths and bond angles), vibrational frequencies and NMR chemical shifts for the minimum energy conformers were seen to be in a good agreement with the corresponding experimental data. All the assignments of the theoretical frequencies were performed by potential energy distributions using VEDA 4 program.     

Active anionic zero-valent palladium catalysts: characterization by density functional calculations

This works uses DFT (B3LYP/LACVP*(+)//B3LYP/LACVP* level) to ascertain the existence of the tricoordinate, anionic zero-valent palladium complexes that were postulated as the active species in the catalytic cycles of Pd-catalyzed Heck and cross-coupling reactions. The variety of complexes studied (1 and 2), include [Pd(PR(3))(2)X](-) species, in which R=H, Me, vinyl, and phenyl, and X=Cl, Br, I, AcO, and TFA, as well as bidentate complexes, [Pd[Ph(2)P(CH(2))(n)Ph(2)P]X](-), in which X=Cl, AcO and n=3-6. The study shows that these complexes exist as distinct minima in the gas phase as well as in THF. In addition, it provides geometric features and Pd--X(-) dissociation energies for all these complexes as well as some NMR and IR data, which show a clear distinction in these features between the tri- and dicoordinate Pd(0) species. An orbital interaction model and perturbation theory arguments account for the bonding mechanism and rationalize all the trends in the stability of the Pd--X bond. These trends include the effects of variation of X, R, and the length of the linker in the bidentate ligands.     

Modulating the reactivity of Ni-containing Pt(111)-skin catalysts by density functional theory calculations

We present here a first principles density functional theory investigation of the reactivity of Pt(111)-skin catalysts, which are varied from surface alloys with Ni to bulk PtxNi 1-x (x=0.25,0.50,0.75) alloys. Molecule (CO, O, and H) adsorption and oxidation of CO+O and H+O reactions were studied and analyzed in detail. Independent of the adsorbates, the interaction between adsorbates and substrates becomes weakened with increase in Ni, due to the downshift of d-band center of surface Pt atoms. Moreover, activation barriers of CO and H oxidation toward atomic oxygen gradually decrease. In term of CO preferential oxidation (PROX) in excess of hydrogen, it turns out that the overall reactivity and selectivity rely on the optimum of various elementary steps involved such as competitive molecular (dissociative) adsorption and oxidation reaction. The present calculations show that Pt3Ni(111) with Pt overlayer is an optimum catalyst for CO PROX in excess of hydrogen.     

Assessing and measuring the active site density of PGM-free ORR catalysts

Journal of Solid State Electrochemistry - Fuel cells are already employed in commercial transportation even though their price is still too high to enable widespread production. A viable and...     

Understanding the dehydrogenation mechanism over iron nanoparticles catalysts based on density functional theory

The conversion of chemical feedstock materials into high value-added products accompanied with dehydrogenation is of great value in the chemical industry.However,the catalytic dehydrogenation reaction is inhibited by a limited number of expensive noble metal catalysts and lacks understanding of dehydrogenation mechanism.Here,we report the use of heterogeneous non-noble metal iron nanoparticles(NPs) incorporated mesoporous nitrogen-doped carbon to investigate the dehydrogenation mechanism based on experiment observation and density functional theory(DFT) method.Fe NPs catalyst displays excellent performance in the dehydrogenation of 1,2,3,4-tetrahydroquinoline(THQ)with 100% selectivity and 100% conversion for 10-12 h at room temperature.The calculated adsorption energy implies that THQ prefers to adsorb on Fe NPs as compared with absence of Fe NPs.What is more,the energy barrier of transition state is relatively low,illustrating the dehydrogenation is feasible.This work provides an atomic scale mechanism guidance for the catalytic dehydrogenation reaction and points out the direction for the design of new catalysts.     

Benchmark density functional theory calculations for nanoscale conductance

We present a set of benchmark calculations for the Kohn-Sham elastic transmission function of five representative single-molecule junctions. The transmission functions are calculated using two different density functional theory methods, namely an ultrasoft pseudopotential plane-wave code in combination with maximally localized Wannier functions and the norm-conserving pseudopotential code SIESTA which applies an atomic orbital basis set. All calculations have been converged with respect to the supercell size and the number of k|| points in the surface plane. For all systems we find that the SIESTA transmission functions converge toward the plane-wave result as the SIESTA basis is enlarged. Overall, we find that an atomic basis with double zeta and polarization is sufficient (and in some cases, even necessary) to ensure quantitative agreement with the plane-wave calculation. We observe a systematic downshift of the SIESTA transmission functions relative to the plane-wave results. The effect diminishes as the atomic orbital basis is enlarged; however, the convergence can be rather slow.     

Recent applications of density functional theory calculations to biomolecules

The purpose of this overview is to highlight the broad scope and utility of current applications of density functional theory (DFT) methods for the study of the properties and reactions of biomolecules. This is illustrated using examples selected from research carried out within our research group and in collaboration with others. The examples include the hyperfine coupling constants of amino acid radicals, the use of an amino acid as a chiral catalyst for the formation of carbon–carbon bonds in the aldol reaction, hydrogen-bond mediated catalysis of an aminolysis reaction, radiation-induced protein–DNA cross-links, and the mechanism by which an antitumor drug cleaves DNA. We demonstrate that DFT-based methods can be applied successfully to a broad range of problems that remain beyond the scope of conventional electron-correlation methods. Furthermore, we show that contemporary computational quantum chemistry complements experiment in the study of biological systems. Received: 19 December 2001 / Accepted: 8 April 2002 / Published online: 4 July 2002     

Lithium adsorption on graphite from density functional theory calculations

The structural, energetic, and electronic properties of the Li/graphite system are studied through density functional theory (DFT) calculations using both the local spin density approximation (LSDA), and the gradient-corrected Perdew-Burke-Ernzerhof (PBE) approximation to the exchange-correlation energy. The calculations were performed using plane waves basis, and the electron-core interactions are described using pseudopotentials. We consider a disperse phase of the adsorbate comprising one Li atom for each 16 graphite surface cells, in a slab geometry. The close contact between the Li nucleus and the graphene plane results in a relatively large binding energy (larger than 1.1 eV). A detailed analysis of the electronic charge distribution, density difference distribution, and band structures indicates that one valence electron is entirely transferred from the atom to the surface, which gives rise to a strong interaction between the resulting lithium ion and the cloud of pi electrons in the substrate. We show that it is possible to explain the differences in the binding of Li, Na, and K adatoms on graphite considering the properties of the corresponding cation/aromatic complexes.     

Studies of iridium nanoparticles using density functional theory calculations

The energetics and the electronic and magnetic properties of iridium nanoparticles in the range of 2-64 atoms were investigated using density functional theory calculations. A variety of different geometric configurations were studied, including planar, three-dimensional, nanowire, and single-walled nanotube. The binding energy per atom increases with size and dimensionality from 2.53 eV/atom for the iridium dimer to 6.09 eV/atom for the 64-atom cluster. The most stable geometry is planar until four atoms are reached and three-dimensional thereafter. The simple cubic structure is the most stable geometric building block until a strikingly large 48-atom cluster, when the most stable geometry transitions to face-centered cubic, as found in the bulk metal. The strong preference for cubic structure among small clusters demonstrates their rigidity. This result indicates that iridium nanoparticles intrinsically do not favor the coalescence process. Nanowires formed from linear atomic chains of up to 4-atom rings were studied, and the wires formed from 4-atom rings were extremely stable. Single-walled nanotubes were also studied. These nanotubes were formed by stacking 5- and 6-atom rings to form a tube. The ring stacking with each atom directly above the previous atom is more stable than if the alternate rings are rotated.     

Methylation of zebularine investigated using density functional theory calculations

Deoxyribonucleic acid (DNA) methylation is an epigenetic phenomenon, which adds methyl groups into DNA. This study reveals methylation of a nucleoside antibiotic drug 1‐(β‐D ‐ribofuranosyl)‐2‐pyrimidinone (zebularine or zeb) with respect to its methylated analog, 1‐(β‐D ‐ribofuranosyl)‐5‐methyl‐2‐pyrimidinone (d5) using density functional theory calculations in valence electronic space. Very similar infrared spectra suggest that zeb and d5 do not differ by types of the chemical bonds, but distinctly different Raman spectra of the nucleoside pair reveal that the impact caused by methylation of zeb can be significant. Further valence orbital‐based information details on valence electronic structural changes caused by methylation of zebularine. Frontier orbitals in momentum space and position space of the molecules respond differently to methylation. Based on the additional methyl electron density concentration in d5, orbitals affected by the methyl moiety are classified into primary and secondary contributors. Primary methyl contributions include MO8 (57a), MO18 (47a), and MO37 (28a) of d5, which concentrates on methyl and the base moieties, suggest certain connection to their Frontier orbitals. The primary and secondary methyl affected orbitals provide useful information on chemical bonding mechanism of the methylation in zebularine. © 2011 Wiley Periodicals, Inc. J Comput Chem, 2011     

Understanding rubredoxin redox sites by density functional theory studies of analogues

Determining the redox energetics of redox site analogues of metalloproteins is essential in unraveling the various contributions to electron transfer properties of these proteins. Since studies of the [4Fe-4S] analogues show that the energies are dependent on the ligand dihedral angles, broken symmetry density functional theory (BS-DFT) with the B3LYP functional and double-ζ basis sets calculations of optimized geometries and electron detachment energies of [1Fe] rubredoxin analogues are compared to crystal structures and gas-phase photoelectron spectroscopy data, respectively, for [Fe(SCH(3))(4)](0/1-/2-), [Fe(S(2)-o-xyl)(2)](0/1-/2-), and Na(+)[Fe(S(2)-o-xyl)(2)](1-/2-) in different conformations. In particular, the study of Na(+)[Fe(S(2)-o-xyl)(2)](1-/2-) is the only direct comparison of calculated and experimental gas phase detachment energies for the 1-/2- couple found in the rubredoxins. These results show that variations in the inner sphere energetics by up to ～0.4 eV can be caused by differences in the ligand dihedral angles in either or both redox states. Moreover, these results indicate that the protein stabilizes the conformation that favors reduction. In addition, the free energies and reorganization energies of oxidation and reduction as well as electrostatic potential charges are calculated, which can be used as estimates in continuum electrostatic calculations of electron transfer properties of [1Fe] proteins.     

Modeling halogen bonding with planewave density functional theory: Accuracy and challenges

Inspired by the recent interest of halogen bonding (XB) in the solid state, we detail a comprehensive benchmark study of planewave DFT geometry and interaction energy of lone-pair (LP) type and aromatic (AR) type halogen bonded complexes, using PAW and USPP pseudopotentials. For LP-type XB dimers, PBE-PAW generally agrees with PBE/aug-cc-pVQZ(−pp) geometries but significantly overbinds compared to CCSD(T)/aug-cc-pVQZ(-pp). Grimme's D3 dispersion corrections to PBE-PAW gives better agreement to the MP2/cc-pVTZ(-pp) results for AR-type dimers. For interaction energies, PBE-PAW may overbind or underbind for weaker XBs but clearly overbinds for stronger XBs. D3 dispersion corrections exacerbate the overbinding problem for LP-type complexes but significantly improves agreement for AR-type complexes compared to CCSD(T)/CBS. Finally, for periodic XB crystals, planewave PBE methods slightly underestimate the XB lengths by 0.03 to 0.05 Å. © 2019 Wiley Periodicals, Inc.     

Theoretical investigations of the equol molecule: semi-empirical and density functional theory calculations

The structural and electronic properties of the equol molecule, an estrogenic isoflavone, have been investigated theoretically by performing semi-empirical self-consistent field molecular orbital and density functional theory calculations. The geometry of the system has been optimized at the level of AM1 method and the electronic properties have been calculated at the level of B3LYP functional.     

Periodic Hartree-Fock and density functional theory calculations for Li-doped polyacetylene chains

We have performed periodic restricted Hartree-Fock/6-31G** and B3LYP6-31G** density functional theory calculations on Li-doped trans-polyacetylene at various dopant concentrations, using C(2m)H(2m)Li2 unit cells (m = 7-14). Except for maintaining P1 rod symmetry the geometry was completely optimized for both uniform and nonuniform doping structures. In addition to geometry we obtain atomic charges, along with soliton formation and dopant binding energies, as well as band structures and densities of states. A thorough analysis of the band structure and density of states, as a function of dopant concentration, is presented. We also characterize the complex nature of the binding interaction between Li and the polyacetylene chain.     

Matrix infrared spectra and density functional theory calculations of molybdenum hydrides

Laser-ablated Mo atoms react with H2 upon condensation in excess argon, neon, and hydrogen. The molybdenum hydrides MoH, MoH2, MoH4, and MoH6 are identified by isotopic substitution (H2, D2, HD, H2 + D2) and by comparison with vibrational frequencies calculated by density functional theory. The MoH2 molecule is bent, MoH4 is tetrahedral, and MoH6 appears to have the distorted trigonal prism structure.     

Projected gradient algorithms for Hartree-Fock and density matrix functional theory calculations

We present projected gradient algorithms designed for optimizing various functionals defined on the set of N-representable one-electron reduced density matrices. We show that projected gradient algorithms are efficient in minimizing the Hartree-Fock or the Muller-Buijse-Baerends functional. On the other hand, they converge very slowly when applied to the recently proposed BBk (k=1,2,3) functionals [O. Gritsenko et al., J. Chem. Phys. 122, 204102 (2005)]. This is due to the fact that the BBk functionals are not proper functionals of the density matrix.     

Carbohydrate-protein recognition probed by density functional theory and ab initio calculations including dispersive interactions

Carbohydrate-protein recognition has been studied by electronic structure calculations of complexes of fucose and glucose with toluene, p-hydroxytoluene and 3-methylindole, the latter aromatic molecules being analogues of phenylalanine, tyrosine and tryptophan, respectively. We use mainly a density functional theory model with empirical corrections for the dispersion interactions (DFT-D), this method being validated by comparison with a limited number of high level ab initio calculations. We have calculated both binding energies of the complexes as well as their harmonic vibrational frequencies and proton NMR chemical shifts. We find a range of minimum energy structures in which the aromatic group can bind to either of the two faces of the carbohydrate, the binding being dominated by a combination of OH-pi and CH-pi dispersive interactions. For the fucose-toluene and alpha-methyl glucose-toluene complexes, the most stable structures involve OH-pi interactions, which are reflected in a red shift of the corresponding O-H stretching frequency, in good quantitative agreement with experimental data. For those structures where CH-pi interactions are found we predict a corresponding blue shift in the C-H frequency, which parallels the predicted proton NMR shift. We find that the interactions involving 3-methylindole are somewhat greater than those for toluene and p-hydroxytoluene.     

Prediction of cellulose nanotube models through density functional theory calculations

We report the generation of a nano-scale tubular structure of cellulose molecules (CelNT), through density functional theory (DFT) calculations. When a cellulose III_I (1 0 0) chain sheet model is optimized by DFT calculations, the sheet models spontaneously roll into tubes. The oligomers arrange in a right-handed, four-fold helix with one-quarter chain staggering, oriented with parallel polarity similar to the original crystal structure. Based on a one-quarter chain staggering relationship, six large CelNT models, consisting of 16 cellulose chains with DP = 80, are constructed by combinations of two types of chain polarities and three types of symmetry operations to generate a circular arrangement of molecular chains. All six CelNT models are examined by molecular dynamics (MD) calculations in chloroform. While four CelNT models retain a tubular form throughout MD calculations, the remaining two deform. 3D-RISM theory model is used to estimate the solvation free energies of the four CelNT models. The results suggest that the CelNT model with a chain arrangement of parallel polarity and right-handed helical symmetry forms the most stable tube structure.     

Exploring odd-even effects of simple oligomer-like DRCNnT series: a study based on density functional theory/time-dependent density functional theory calculations

Odd-even effects of short-circuit current density and power conversion efficiency (PCE) are an interesting phenomenon in some organic solar cells. Although some explanations have been given, why they behave in such a way is still an open question. In the present work, we investigate a set of acceptor-donor-acceptor simple oligomer-like small molecules, named the DRCNnT (n = 5-9) series, to give an insight into this phenomenon because the solar cells based on them have high PCE (up to 10.08%) and show strong odd-even effects in experiments. By modeling the DRCNnT series and using density functional theory, we have studied the ground-state electronic structures of the DRCNnT (n = 5-9) series in condensed phase. The calculated results reproduce the experimental trends well. Furthermore, we find that the exciton-binding energies of the DRCNnT series may be one of the key parameters to explain this phenomenon because they also show odd-even effects. In addition, by studying the effects of alkyl branch and terminal group on odd-even effects of dipole moment, we find that eliminating one or two alkyl branches does not break the odd-even effects of dipole moments, but eliminating one or two terminal groups does. Finally, we conclude that removing one alkyl branch close to the terminal group of DRCN5T can decrease highest occupied molecular orbital (HOMO) energy (thus increasing open circuit voltage) and increase dipole moment (thus enhancing charge separation and short-circuit current). This could be a new and simple method to increase the PCE of DRCN5T-based solar cells.     

Electron-structure calculations and bond order analysis using density functional theory of cationic dinuclear arene ruthenium complexes

The structure and nature of the metal-metal bonding interaction in the cationic complexes [(eta6-C6Me6)2Ru2(mu2-H)3]+ (1), [(eta6-C6Me6)2Ru2(mu2-H)2(mu2-1,4-SC6H4Br)]+ (2), [(eta6-C6Me6)2Ru2(mu2-H)(mu2-1,4-SC6H4Br)2]+ (3), and [(eta6-C6Me6)2Ru2(mu2-1,4-SC6H4Br)3]+ (4) have been studied at the density functional theory (DFT) level using molecular orbital (MO) theory, bond order (BO) analysis, bond decomposition energy (BDE), electron localization function (ELF), and Laplacian of the density methods. The results show that there is no direct bond between the two ruthenium atoms in 1-4, the MO interaction within the diruthenium backbone being stabilized by the bridging ligands. For complex 1, the ELF clearly shows that the bond within the diruthenium backbone is through the three bridging hydride ligands, which act as a sort of glue by forming three-center two-electron bonds characterized by (Ru, H, Ru) basins with 1.8 e mostly located in the H atomic basin.