The admittance of a simple electrocatalytic process coupled with an additional electrochemical adsorption reaction

The admittance of the process which is under activation control, is analysed in stationary conditions for the case of coupling in parallel with an additional electrochemical adsorption reaction which influences the electrode activity for the main process.The whole system has two time constants. As its equivalent circuit, a two-time constant electrical RC circuit of a particular structure is proposed; this structure consists of two subcircuits coupled in parallel.The use of a multi-time constant RC equivalent circuit for a faradaic process results in most cases in an ambiguous interpretation of the process, since the majority of structures of such circuits have multiple solutions. The choice of the correct interpretation needs reference to arguments outside the scope of ac measurements.It is indicated that the above ambiguity does not appear if one relinquishes the use of equivalent circuits in the modelling of complex faradaic systems.     

Reduction of nitrophenols in an electrocatalytic system

Results of research into hydrogenation of o- and p-nitrophenols in an electrocatalytic system on a cathode activated with d- and s-metal catalysts are presented. The optimal conditions for o-aminophenol formation on Raney nickel were identified by the probability-determined method for the experimental design.     

Photocatalysis: an overview of recent developments and technological advancements

Photocatalysis,which is the catalyzation of redox reactions via the use of energy obtained from light sources,is a topic that has garnered a lot of attention in recent years as a means of addressing the environmental and economic issues plaguing society today.Of particular interest are photosynthesis can potentially mimic a variety of vital reactions,many of which hold the key to develop sustainable energy economy.In light of this,many of the technological and procedural advancements that have recently occurred in the field are discussed in this review,namely those linked to:(1)photocatalysts made from metal oxides,nitride,and sulfides;(2)photocatalysis via polymeric carbon nitride(PCN);and(3)general advances and mechanistic insights related to TiO2-based catalysts.The challenges and opportunities that have arisen over the past few years are discussed in detail.Basic concepts and experimental procedures which could be useful for eventually overcoming the problems associated with photocatalysis are presented herein.     

o-Carborane as an electron-transfer mediator in electrocatalytic reduction

Electron transfer behavior of 1,2-diphenyl-o-carborane was investigated by cyclic voltammetry (CV). In the presence of 1,2-dibromo-1,2-diphenylethane, a significant catalytic current was observed. The macroscale electrocatalytic reduction of the dibromide using a catalytic amount (1 mol%) of the carborane mediator afforded the desired trans-stilbene in excellent yield.     

电聚合制备聚苯胺@石墨毡复合电极及其在电芬顿过程中的高效电催化性能

作为一种高级氧化技术(AOPs),芬顿氧化法(Fenton)因其操作简单、绿色高效而备受关注.其基本原理是Fe2+催化H2O2产生的羟基自由基(?OH)进攻有机物使之降解为无机小分子或盐.电芬顿法(Electro-Fenton,E-Fenton)是利用电化学方法原位生成H2O2的Fenton衍生法,其优点在于不需要从外界加入H2O2、高效节能、无选择性、并且易于和其他处理技术耦合,是一种非常有价值和应用前景的新型水处理技术.电芬顿技术的理论探究和工艺优化,是当今高级氧化技术的理论和实践研究的重要内容.E-Fenton过程的关键步骤是阴极材料上氧还原反应(Oxygen reduction reaction,ORR)持续生成H2O2.由于析氢过电位高、稳定性好、性能优异,碳材料成为ORR反应最常用的电催化阴极材料.石墨毡作为一种三维多孔立体材料,具有电化学活性面积大、传质好、导电性强、价格低等优点,是ORR的理想阴极材料.聚苯胺材料作为一种导电高分子材料,价格便宜、加工性好、且含有丰富的N原子,在基础研究和实际应用领域都十分活跃.我们创新性地采用电聚合的方法合成了聚苯胺@石墨毡(PANI@GF)复合电极,并通过降解邻苯二甲酸二甲酯(dimethyl phthalate,DMP)研究了其在电芬顿过程中的电催化性能.通过扫描电镜、X射线光电子能谱分析对电极表面结构和杂原子掺杂性进行了物化表征.结果显示PANI@GF复合电极同时具有宏观和微观的三维多孔结构,这种结构蓬松的多孔结构为氧气提供了合适的传递通道和足够的反应面积.所制备复合电极中N原子含量约为1.9%,且吡啶N和吡咯N的含量相对较高.这些N原子来自聚苯胺分子中含有的大量N原子,并能够促进ORR反应.石墨毡和聚苯胺两种材料的在结构和组分上的特点,使得PANI@GF复合电极具有优异的电芬顿降解DMP的性能.在DMP浓度为50 mg/L、电位0.5 V(vs.SCE)、氧气流速为0.4 L/min的条件下,其DMP降解反应表观动力学常数达0.0753 min-1,是石墨毡电极表观动力学常数(0.0151 min-1)的5倍.PANI@GF复合电极制备的最优聚合时间和碳化温度分别为1 h和900℃.这是因为聚合时间太长,可能导致聚苯胺层厚度大,微孔结构被堵塞,进而降低了反应活性面积和影响氧气传质效果,使得电极性能下降;而聚合时间太短,可能导致电极复合不充分.高温碳化可以使石墨毡表面聚苯胺层形成更多的孔结构,从而有利于ORR过程.DMP降解过程中氧气流速、Fe2+用量以及pH值等工艺条件对电极性能有一定的影响,结果表明其相应的优化值分别为0.4 L/min、1.0 mmol/L和3.0.当氧气流速过低时,溶液中低浓度的溶解氧使ORR过程受传质过程限制,导致电极不能充分反应;当氧气流速过大时,并不会增加已经达到饱和的溶液中的氧气浓度,而过大的氧气速率会冲击电极表面,降低电极稳定性而影响其催化性能.对Fe2+.用量而言,E-Fenton过程有多种Fe循环途径,不同的铁含量对于电极性能影响不明显.因此,1.0 mmol/L的Fe含量足够满足实验需要.pH值对E-Fenton过程至关重要,pH较高时,铁离子会形成配合物,阻碍铁循环,并且会导致H2O2的分解,从而降低电极DMP降解性能;而当pH太低时,较多的酸增加成本,且需要后续处理过程以消除酸的影响.实验结果表明3.0是最优pH值,与传统Fenton方法的最适pH相符.PANI@GF复合电极具有高效催化降解DMP的能力,在电芬顿技术处理有机废水中有潜在应用.     

Hydrogenation and Ammoniation of SrTiO3 for an Enhanced Visible-light Photocatalysis

Hydrogenation and ammoniation of SrTiO₃ (STO), a normal ultraviolet photocatalyst, were performed by annealing STO〈100〉in H₂:N₂=5%:95% and NH₃, respectively, at various tem-peratures T. It was found that hydrogenation at T≥900 oC remarkably enhanced the UV photocatalytic ability of STO, but the visible-light photocatalysis was still unavailable, while ammoniation at T≥800 oC introduced the N doping, resulting in visible-light photocat-alytic activity. Furthermore, when a hydrogenated STO was subjected to ammoniation, the visible-light photocatalytic ability was nearly the same as that of the ammoniated one; but the hydrogenation of an ammoniated one significantly enhanced visible-light photocatalysis, indicating a synergetic effect of hydrogenation and ammoniation. Discussions and identifi-cations have been made to analyze these results.     

Epoxidation with an electrocatalytic p-450 model system in an acidic solution

An electrochemical P-450 model system using meso-tetraphenylporphyrinatomanganese(III) chloride (MnTPP), imidazole and acetic acid was tested in an acetonitrile solution, and epoxide was obtained with a good current efficiency. The results of cyclic voltammetry revealed that acid plays an important role in the second electron transfer.     

On stability of model electrocatalytic process with frumkin adsorption isotherm occurring on spherical electrode

The method of impedance spectroscopy was used for theoretical studies of the conditions of appearance of Hopf instability in a model electrochemical system with a preceding homogeneous chemical reaction in the Nernst diffusion layer and electrocatalytic reaction on the spherical electrode surface under potentiostatic conditions. It is shown within the suggested electrochemical instability model based on the potential-dependent adsorption/desorption that the effective rate of the preceding homogeneous chemical reaction may affect the system stability. The effect diminishes at a decrease in the electrode radius. The instability region grows at an increase in the thickness of the Nernst diffusion layer.     

Preparation and Photocatalysis of Mesoporous TiO2 Nanofibers via an Electrospinning Technique

Mesoporous TiO₂ nanofibers have been synthesized by a new method that combines sol-gel chemistry and electrospinning technique. The obtained mesoporous TiO₂ nanofibers were characterized with scanning electron microscopy(SEM), X-ray diffraction(XRD), transmission electron microscopy(TEM) and nitrogen adsorption-desorption isotherms. The photocatalytic performance was evaluated by the photocatalytic degradation of Rhodamine B under UV light irradiation. The results show that mesoporous TiO₂ nanofibers exhibit higher photocatalytic activity compared with nonporous TiO₂ nanofibers.     

Photocatalysis as an Effective Tool for Upcycling Polymers into Value-Added Molecules

Shaping a sustainable future is closely tied to the development of advanced plastic recycling technologies. As global recycling rates remain low, the lion's share of post-consumer plastics is either incinerated or disposed of in landfills. This unbalanced plastic waste management not only poses severe environmental risks, but also entails an irrevocable loss of chemical resources that are embedded in synthetic polymers. To give plastic waste a new life, a series of photocatalytic methods has recently been reported that convert polymers directly into value-added organic molecules. These approaches operate at ambient temperature, show high reactivity/selectivity, and provide alternative reaction pathways as compared to thermal depolymerizations. This Minireview highlights the scientific breakthroughs in upcycling polymers through state-of-the-art photocatalysis under environmentally benign conditions.     

Catalyst-free synthesis of iodine-doped graphene via a facile thermal annealing process and its use for electrocatalytic oxygen reduction in an alkaline medium

Iodine-doped graphene has been successfully fabricated through a simple, economical, and scalable approach. The new metal-free catalyst can exhibit a high catalytic activity, long-term stability, and an excellent methanol tolerance for the oxygen reduction reaction.     

Ferroelectrics in Photocatalysis

The rapid development of industrialization and population has brought water, air-pollution and energy crises. Solar-driven catalysis is expected to relieve these issues. However, limited by poor light harvesting, serious charge recombination of semiconductors, and high surface reaction barriers, the low efficiency of solar conversion is far from satisfactory for industrial needs. Ferroelectrics are considered to be promising photocatalysts to overcome these shortcomings. Herein, perovskite ferroelectrics such as BaTiO₃, PbTiO₃, BiFeO₃ and LiNbO₃, layered bismuth-based ferroelectrics like Bi₂WO₆ and Bi₂MoO₆, and other ferroelectrics are introduced, and their crystal structure, polarity source and synthetic method are highlighted. Subsequently, research progress in ferroelectrics for photocatalysis is summarized, including pollution degradation, water splitting and CO₂ reduction. Finally, the current challenges and future prospects of ferroelectric photocatalysts are provided. The purpose of this review is not only to provide a timely summary for the application of ferroelectrics in photocatalysis, but also to present deep insight and a guideline for future research work into ferroelectrics.     

Preface to Solar Photocatalysis

<正>Solar energy is the most important clean and renewable energy in the world. However, the unpredictability, seasonal variation day and night, uneven distribution and low energy density limit its practical application. Photocatalysis technology has a very broad application prospect in solving energy and environmental problems.     

基于Cu2O的光催化研究

光催化技术可以利用太阳能将水转化为氢能以及降解环境中的有机污染物,具有成本低廉、环境友好等特点, 是解决全球能源危机和当前环境污染的重要途径之一。 Cu₂O禁带宽度介于2.0-2.2eV之间,是一种具有可见光响应的p型氧化物半导体,在光催化领域具有良好的应用前景,逐渐成为国内外研究的热点。本文介绍了Cu₂O晶体特殊的网络结构和能带结构特点以及对其进行的掺杂和复合等改性研究,概述了Cu₂O及其改性材料在光解水制氢及光降解有机污染物方面的研究进展,阐明提高Cu₂O光催化效率的关键是抑制光生载流子的复合和Cu₂O的光腐蚀。指出了基于Cu₂O的光催化反应中存在的问题,并对未来的研究方向做出了展望。     

微波强化光催化氧化技术研究现状及展望

综述了微波强化光催化氧化的处理效果和机理,并对催化剂投量、光源、溶解氧、温度等相关因素对处理效果的影响进行了详细阐述.最后对微波强化光催化的应用前景进行了展望.     

Polymerized hemin as an electrocatalytic platform for peroxynitrite's oxidation and detection

Peroxynitrite (ONOO⁻) constitutes a major cytotoxic agent, implicated in a host of pathophysiological conditions, thereby stimulating a tremendous interest in evaluating its role as an oxidant in vivo. Some of the detection methods for peroxynitrite include oxidation of fluorescent probes, EPR spectroscopy, chemiluminescence, immunohistochemistry, and probe nitration; however, these are more difficult to apply for real-time quantification due to their inherent complexity. The electrochemical detection of peroxynitrite is a simpler and more convenient technique, but the best of our knowledge there are only few papers to date studying its electrochemical signature, or reporting amperometric microsensors for peroxynitrite. Recently, we have reported the use of layered composite films of poly(3,4-ethylenedioxythiophene) (PEDOT) and hemin (iron protoporphyrin IX) as a platform for amperometric measurement of peroxynitrite. The main goal herein is to investigate the intrinsic catalytic role of hemin electropolymerized thin films on carbon electrodes in oxidative detection of peroxynitrite. The electrocatalytic oxidation of peroxynitrite is characterized by cyclic voltammetry. The catalytic current increased as a function of peroxynitrite's concentration, with a peak potential shifting positively with peroxynitrite's concentration. The catalytic efficiency decreased as the scan rate increased, and the peak potential of the catalytic oxidation was found to depend on pH. We show that optimized hemin-functionalized carbon electrodes can be used as simple platforms for peroxinitrite detection and quantification. We report dose–response amperometry as an electroanalytical determination of this analyte on hemin films and we contrast the intrinsic hemin catalytic role with its performance in the case of the PEDOT–hemin as a composite matrix. Finally, we include some work extending the use of simple hemin films for peroxynitrite determination on carbon microfiber electrodes in a flow system.     

Poly-xanthurenic acid as an efficient mediator for the electrocatalytic oxidation of NADH

This paper describes, for the first time, the development of a simple and highly sensitive chemical sensor based on a new electroactive material, electrogenerated in situ from xanthurenic acid on an electrode modified with MWCNT. The modified electrode shows efficient electrocatalytic oxidation activity towards NADH at an applied potential of 0.1 V vs. Ag/AgCl. The kinetic constant, k_kin, for the electrocatalytic oxidation of NADH, evaluated by chronoamperometry and voltammetry using RDE, provided values close to 10⁵ mol^?1 L s^?1.