Nanoscale patterning of solid-supported membranes by integrated diffusion barriers

Ultraflat nanostructured substrates have been used as a template to create patterned solid-supported bilayer membranes with polymerizable tethered lipids acting as diffusion barriers. Patterns in the size range of 100 nm were successfully produced and characterized. The diffusion barriers were embedded directly into the phospholipid bilayer and could be used to control the fluidity of the membrane as well as to construct isolated membrane corrals. By using nanosphere lithography to structure the templates it was possible to systematically adjust the lipid diffusion coefficients in a range comparable to those observed in cellular membranes. Single colloids applied as mask in the patterning process yielded substrates for creation of isolated fluid membrane patches corralled by diffusion barriers. Numerous potential applications for this new model system can be envisioned, ranging from the study of cellular interactions or of molecular diffusion in confined geometries to biosensor arrays.     

Supported lipid bilayers on biocompatible polysaccharide multilayers

Formation of supported lipid bilayers on soft polymer cushions is a useful approach to decouple the membrane from the substrate for applications involving membrane proteins. We prepared biocompatible polymer cushions by the layer-by-layer assembly of two polysaccharide polyelectrolytes, chitosan (CHI) and hyaluronic acid, on glass and silicon substrates. (CHI/HA)(5) films were characterized by atomic force microscopy, giving an average thickness of 57 nm and roughness of 25 nm in aqueous solution at pH 6.5. Formation of zwitterionic lipid bilayers by the vesicle fusion method was attempted using DOPC vesicles at pH 4 and 6.5 on (CHI/HA)(5) films. At higher pH adsorbed lipids had low mobility and large immobile lipid fractions; a combination of fluorescence and AFM indicated that this was attributable to formation of poor quality membranes with defects and pinned lipids rather than to a layer of surface-adsorbed vesicles. By contrast, more uniform bilayers with mobile lipids were produced at pH 4. Fluorescence recovery after photobleaching gave diffusion coefficients that were similar to those for bilayers on PEG cushions and considerably higher than those measured on other polyelectrolyte films. The results suggest that the polymer surface charge is more important than the surface roughness in controlling formation of mobile supported bilayers. These results demonstrate that polysaccharides provide a useful alternative to other polymer cushions, particularly for applications where biocompatibility is important.     

Crosslinked Alginate Films as Rate Controlling Membranes for Transdermal Drug Delivery Application

The present investigation was undertaken to prepare and evaluate the crosslinked sodium alginate (SA) films as rate controlling membranes (RCM) for transdermal drug delivery application. The drug free films of SA were prepared by mercury substrate method and evaluated for thickness uniformity, tensile strength and water vapor permeation (WVP). The films were characterized by scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). Drug diffusion characteristics of the films were studied using diclofenac diethylamine as a model drug. The prepared membranes were thin, flexible and smooth. Tensile strength measurement and DSC analysis suggested that as the crosslink density increases, the tougher membranes were formed. The WVP and drug diffusion were dependent upon the crosslink density and thickness of the films. The permeability was decreased with increasing crosslink density and thickness of the films. The molar mass between the crosslinks and crosslink density were calculated using empirical equations. The primary skin irritation study indicated that the prepared membranes were less irritant and safe for transdermal application.     

Theory of curved interfaces and membranes: Mechanical and thermodynamical approaches

The mechanical and thermodynamical approaches to the theory of the general curved interfaces are presented and compared. In the mechanical approach a curved interface or membrane is characterized by the tensors of surface stresses and moments. They are connected by the surface balances of the linear and angular momentum. On the other hand, in the thermodynamical approach the surface is characterized by the scalar dilation and shear tensions as well as by the bending and torsion moments. In this review we investigate the problem about the relationships connecting the mechanical and thermodynamical approaches. We find that these two approaches are in a good agreement, that they are complementary to each other and represent the two parts of a self-consistent theory. The latter can be applied to any system where curved interfaces, thin films or membranes are present: microemulsions, lamellar and sponge phases, lipid vesicles and cell membranes, capillary waves at interfaces, undulation and peristaltic surface forces, lateral capillary forces between particles in thin liquid films, etc.     

Hybrid protein-lipid patterns from aluminum templates

An aqueous aluminum liftoff process suitable for fabrication of hybrid patterns of protein and supported lipid membrane on silica surfaces is described. Patterned aluminum thin films, which can be produced by conventional optical or electron beam lithography, are employed as sacrificial protecting layers to define the geometry of the protein-lipid patterns. The aluminum is lifted off in a mildly basic aqueous solution, which preserves the integrity of bound protein layers. The newly exposed substrate can then be filled with supported membrane by exposure to an aqueous vesicle suspension. The final substrate consists of patterned protein and lipid membranes with spatial resolution determined by aluminum patterns, down to 200 nm line widths in this case. Inorganic surfaces were characterized by atomic force microscopy and X-ray photoelectron spectroscopy while supported bilayers and protein patterns were characterized by epifluorescence microscopy.     

Issues of ligand accessibility and mobility in initial cell attachment

The influence of lateral ligand mobility on cell attachment and receptor clustering has previously been explored for membrane-anchored molecules involved in cell-cell adhesion. In this study, we considered instead a cell binding motif from the extracellular matrix. Even though the lateral mobility of extracellular matrix ligands in membranes does not occur in vivo, we believe it is of interest for cell engineering in vitro. As is the case for cell-cell adhesion molecules, lateral mobility of extracellular matrix ligands could influence cell attachment and, subsequently, cell behavior in cell culture. In this paper, the accessibility and functionality of extracellular matrix ligands presented at surfaces were evaluated for the conditions of laterally mobile versus non-mobile ligands by studying ligand-antibody binding events and early cell attachment as a function of ligand concentration. We compare the initial attachment of rat-derived adult hippocampal progenitor (AHP) cells on laterally mobile, supported phospholipid bilayer membranes to non-mobile, poly-L-lysine-grafted-poly(ethylene glycol) (PLL-g-PEG) polymer films functionalized with a range of laminin-derived IKVAV-containing peptide densities. To this end, synthesis of a new PLL-g-PEG/PEG-IKVAV polymer is described. The characterization of available IKVAV peptides on both surface presentations schemes was explored by studying the mass uptake of anti-IKVAV antibodies using a combination of the surface-sensitive techniques quartz crystal microbalance with dissipation monitoring, surface plasmon resonance spectroscopy, and optical waveguide lightmode spectroscopy. IKVAV-containing peptides presented on laterally mobile, supported phospholipid bilayers and non-mobile PLL-g-PEG were recognized by the anti-IKVAV antibody in a dose-dependent manner, indicating that the amount of available IKVAV ligands increases proportionally with ligand density over the concentrations tested. Attachment of AHP cells to IKVAV-functionalized PLL-g-PEG and supported phospholipid bilayers followed a sigmoidal dependence on peptide concentration, with a critical concentration of approximately 3 pmol/cm2 IKVAV ligands required to support initial AHP cell attachment for both surface modifications. There appeared to be little influence of IKVAV peptide mobility on the initial attachment of AHP cells. Although the spread in the cell attachment data was larger for the PLL-g-PEG surface modification, this was reduced when observed after 24 h, indicating that the cells might need longer times to establish attachment strengths equivalent to those observed on peptide-functionalized supported lipid bilayers. The present study is a step toward understanding the influence of extracellular-matrix-derived ligand mobility on cell fate. Further analysis should focus on the systematic tuning of lateral ligand diffusion, as well as a comparison between the response of non-spreading cells (i.e., AHPs), versus spreading cells (i.e., fibroblasts).     

Preparation of mesoporous hydroxyapatite films used as biomaterials via sol–gel technology

The mesoporous hydroxyapatite films (MHFs) have been developed on glass slides by sol–gel dip-coating technology using cetyltrimethylammonium bromide (CTAB) as the structure-directing agent and the effects of pH value and calcination temperatures on the surface morphology and the mesostructure have been discussed. The phase composition, surface morphology, mesostructure and surface wettability were characterized by X-ray diffraction, scanning electron microscope, transmission electron microscope, N₂ adsorption–desorption isotherms and water contact angle analyzer, respectively. The continuous thin films consisted of mesoporous hydroxyapatite particles (~50 nm) with mesopores (~2 nm) within the particles have been obtained after being prepared in the condition of concentration of CTAB 0.09 M, pH of sol 3.0, reaction temperature 60 °C and calcination temperature 550 °C. In vitro cell culture, the mesoporous films, which possessed favorable surface wettability resulting from the special pore structure, have exhibited a high degree of MC3T3-E1 cell attachment and spreading, suggesting a better bioactivity. Therefore, the MHFs can be expected to have potential application for decreasing the ion release of implant and improving the bioactivity as a coating on material surface.     

Micro-BLMs on highly ordered porous silicon substrates: rupture process and lateral mobility

In a recent paper, we hypothesized that the continuous increase in membrane conductance observed for nano-BLMs is the result of an independent rupturing of single membranes or membrane patches covering the pores of the porous material. To prove this hypothesis, we prepared micro-BLMs on porous silicon substrates with a pore size of 7 mum. The upper surface of the silicon substrate was coated with a gold layer, followed by the chemisorption of 1,2-dipalmitoyl-sn-glycero-3-phosphothioethanol (DPPTE) and subsequent addition of a droplet of 1,2-diphytanoyl-sn-glycero-3-phosphocholine (DPhPC) dissolved in n-decane. The lipid membranes were fluorescently labeled and investigated by means of fluorescence microscopy and impedance spectroscopy. Impedance spectroscopy revealed the formation of pore-suspending bilayers with high membrane resistance. Increases in membrane capacitance and membrane conductance were observed. This increase in membrane conductance could be unambiguously related to the individual rupturing of membranes suspending the pores of the porous material as visualized by means of fluorescence microscopy. Moreover, by fluorescence recovery after photobleaching experiments, we investigated the lateral mobility of the lipids within the micro-BLMs leading to a mean effective diffusion coefficient of Deff = (14 +/- 1) microm2/s.     

Interaction of a poly(acrylic acid) oligomer with dimyristoylphosphatidylcholine bilayers

We studied the influence of 5 kDa poly(acrylic acid) (PAA) on the phase state, thermal properties, and lateral diffusion in bilayered systems of dimyristoylphosphatidylcholine (DMPC) using (31)P NMR spectroscopy, differential scanning calorimetry (DSC), (1)H NMR with a pulsed field gradient, and (1)H nuclear Overhauser enhancement spectroscopy (NOESY). The presence of PAA does not change the lamellar structure of the system. (1)H MAS NOESY cross-peaks observed for the interaction between lipid headgroups and polyion protons demonstrated only surface PAA-biomembrane interaction. Small concentrations of PAA (up to ～4 mol %) lead to the appearance of a new lateral phase with a higher main transition temperature, a lower cooperativity, and a lower enthalpy of transition. Higher concentrations lead to the disappearance of measurable thermal effects. The lateral diffusion coefficient of DMPC and the apparent activation energy of diffusion gradually decreased at PAA concentrations up to around 4 mol %. The observed effects were explained by the formation of at least two types of PAA-DMPC lateral complexes as has been described earlier (Fujiwara, M.; Grubbs, R. H.; Baldeschwieler, J. D. J. Colloid Interface Sci., 1997, 185, 210). The first one is characterized by a stoichiometry of around 28 lipids per polymer, which corresponds to the adsorption of the entire PAA molecule onto the membrane. Lipid molecules of the complex are exchanged with the "pure" lipid bilayer, with the lifetime of the complex being less than 0.1 s. The second type of DMPC-PAA complex is characterized by a stoichiometry of 6 to 7 lipids per polymer and contains PAA molecules that are only partially adsorbed onto the membrane. A decrease in the DMPC diffusion coefficient and activation energy for diffusion in the presence of PAA was explained by the formation of a new cooperative unit for diffusion, which contains the PAA molecule and several molecules of lipids.     

Lateral diffusion in lipid membranes through collective flows

There is no comprehensive model for the dynamics of cellular membranes. Even mechanisms of basic dynamic processes, such as lateral diffusion of lipids, are poorly understood. Our atomic-scale molecular dynamics simulations support a novel, concerted mechanism for lipid diffusion. We find that a lipid and its nearest neighbors move in unison, forming loosely defined clusters. What is more, the motions of lipids are correlated over tens of nanometers: the lateral displacements of lipids in a given monolayer produce striking two-dimensional flow patterns. These flow patterns should have wide implications, affecting, for example, the formation of membrane domains, protein functionality, and action of lipases and drugs on membranes.     

Diffusion of glycosylphosphatidylinositol (GPI)-anchored bovine prion protein (PrP) in supported lipid membranes studied by single-molecule and complementary ensemble methods

In this work cellular bovine prion protein (PrP^c) was incorporated in supported lipid membranes and its lateral diffusion was studied by single-dye tracking (SDT) and a complementary ensemble method, fluorescence recovery after photobleaching (FRAP). PrP^c was purified from calf brain with its native glycosylphosphatidylinositol (GPI) anchor and reconstituted into DMPC lipid vesicles. Homogeneous spreading on solid supports over macroscopic areas was confirmed with fluorescence microscopy. FRAP results demonstrated very high mobile fractions of up to 94%, confirming that most of the GPI-anchored PrP^c are freely diffusive in the fluid supported membrane matrix. Moreover, the lateral diffusivity of PrP^c significantly depends on the pH of the buffer, suggesting that the conformation of PrP^c and thus the frictional drag exerted to the protein molecule (and thus the effective hydrodynamic radius) is influenced by the effective net charge. To complement the ensemble results obtained by FRAP, the statistical variation of lateral diffusion coefficients of individual PrP^c molecules in the supported membranes were measured with SDT. Simulation-based statistical analysis indicated that in addition to the expected statistical scatter there is a significant spread of diffusion coefficients, while the average of the diffusion coefficients of individual proteins obtained by SDT is in excellent agreement with those measured by ensemble FRAP. In further experiments, PrP^c was laterally concentrated in the membrane by the application of tangential electric fields (membrane electrophoresis). However, the equilibrium concentration profile reached after 20 min was different from an exponential gradient. This finding suggests that PrP^c purified from bovine brain possesses non-uniform net charges. As the lateral diffusion coefficient of proteins in two-dimensional lipid membranes sensitively depends upon the frictional drag, the combination of SDT, ensemble FRAP, and membrane electrophoresis can be used as a powerful tool to gain insights into protein–protein binding and oligomer formation that would play a crucial role in infectious protein transmitted diseases such as BSE.     

Supported bilayer lipid membrane arrays on photopatterned self-assembled monolayers

This work demonstrates the use of photocleavable cholesterol derivatives to create supported bilayer lipid membrane arrays on silica. The photocleavable cholesteryl tether is attached to the surface by using the reaction of an amine-functionalized self-assembled monolayer (SAM) and the N-hydroxysuccinimide-based reagent 9. The resultant SAM contains an ortho-nitrobenzyl residue that can be cleaved by photolysis by using soft (365 nm) UV light regenerating the original amine surface, and which can be patterned using a mask. The photoreaction yield was approximately 75 % which was significantly higher than previously found for related ortho-nitrobenzyl photochemistry on gold substrates. The SAMs were characterized by means of contact angle measurements, ellipsometry and X-ray photoelectron spectroscopy. Patterned surfaces were characterized with SEM and AFM. After immersing the patterned surface into a solution containing small unilamellar vesicles of egg phosphatidylcholine (PC), supported lipid membranes were formed comprised of lipid bilayer over the amine functionalized "hydrophilic" regions and lipid monolayer over the cholesteryl "hydrophobic" regions. This was confirmed by fluorescence microscopy and AFM. FRAP studies yielded a lateral diffusion coefficient for the probe molecule of 0.14+/-0.05 microm(2) s(-1) in the bilayer regions and approximately 0.01 microm(2) s(-1) in the monolayer regions. This order of magnitude difference in diffusion coefficients effectively serves to isolate the bilayer regions from one another, thus creating a bilayer array.     

On the preparation of asymmetric CaTi0.9Fe0.1O3−δ membranes by tape-casting and co-sintering process

Commercial deployment of membrane-based technology for high temperature gas separation requires the development of reliable processing of thin supported ceramic membranes. The asymmetric membranes should also demonstrate high oxygen flux in long term operation often encountered in stringent conditions. These requirements may be fulfilled by designing thin membrane films of chemically and mechanically strong CaTi_0.9Fe_0.1O_3−δ oxide material, as prepared in this work. The supported membranes were produced by means of a versatile manufacturing protocol with potential for mass production. It makes use of tape-casting, co-lamination and co-sintering of green laminates. The porosity of the mechanical supports was tailored through the addition of different pore formers, like corn starch and ammonium oxalate, in order to form a well-connected porous network. As-produced 30-μm thin supported CaTi_0.9Fe_0.1O_3−δ membranes were thoroughly characterized to establish relationships between manufacturing parameters and membrane microstructure. The oxygen permeation rates under air/argon gradient in the temperature range 800–1050 °C were investigated. It is concluded that pressure drop resistance in supports strongly contributed to reduce the oxygen flux. Appropriate selection of pore former type and content reduced this effect yielding increased oxygen flux, which became under control of bulk diffusion.     

Impact of membrane fluidity on steric stabilization by lipopolymers

In this work, the impact of lipid lateral mobility on the steric interaction between membranes containing poly(ethylene glycol) (PEG) functionalized lipids was investigated using the surface force apparatus. The force-distance profiles show the presence of electrostatic and steric repulsion that arise from the presence of negatively charged PEG functionalized lipids. Fluid-phase bilayers have high lateral diffusion relative to gel-phase bilayers; however, a quantitative comparison of the interaction forces between membranes in these two different phase states demonstrates a reduced rate of diffusion in the fluid phase for the PEG-lipids under constrained geometries. Thus, the amount of polymer in the contact zone can be modulated and is reduced with fluid membranes; however, complete exclusion was not achieved. As a result, the steric repulsion afforded by PEG chains or binding affinity of ligated PEG chains can only be modestly tailored by the phase state of the liposome.     

AFM-based force-clamp monitors lipid bilayer failure kinetics

The lipid bilayer rupture phenomenon is here explored by means of atomic force microscopy (AFM)-based force clamp, for the first time to our knowledge, to evaluate how lipid membranes respond when compressed under an external constant force, in the range of nanonewtons. Using this method, we were able to directly quantify the kinetics of the membrane rupture event and the associated energy barriers, for both single supported bilayers and multibilayers, in contradistinction to the classic studies performed at constant velocity. Moreover, the affected area of the membrane during the rupture process was calculated using an elastic deformation model. The elucidated information not only contributes to a better understanding of such relevant process, but also proves the suitability of AFM-based force clamp to study model structures as lipid bilayers. These findings on the kinetics of lipid bilayers rupture could be extended and applied to the study of other molecular thin films. Furthermore, systems of higher complexity such as models mimicking cell membranes could be studied by means of AFM-based force-clamp technique.     

Tuning the physical properties of a nematic liquid crystal elastomer actuator

In this report we demonstrate the ability to tune the physical properties of a liquid crystal elastomer (LCE) by varying the amount and type of crosslinking within the elastomer network. LCE films composed of a single mesogenic compound were capable of uniaxial contraction when thermally actuated through the nematic to isotropic phase of the material. We probed the physical properties of the LCE films while varying the amount and concentration of two crosslinking agents and measured actuation strains of 10-35%, elastic moduli of 3-14 MPa, and transition temperatures ranging between 75 and 60°C. The viscous losses of the elastomers and the estimated work capable of being produced by the films were also evaluated. The ability to tune the physical properties of the LCE films allows for a wide range of applications including robotics, microelectromechanical systems (MEMS), shape-changing membranes, and/or microfluidics.     

Studying lateral diffusion in lipid bilayers by combining a magic angle spinning NMR probe with a microimaging gradient system

An alternative technique for studying the lateral diffusion in lipid membranes using pulsed field gradients in combination with magic angle spinning is presented. It is shown that MAS probes inserted in a microimaging device that produce high field gradients can be used to monitor also slow diffusion processes. As an example, measurements of the lateral diffusion of lipids embedded in the bilayer of a cubic phase are presented.     

Influence of perfluorinated compounds on the properties of model lipid membranes

The influence of selected perfluorinated compounds (PFCs), perfluorooctanoic acid (PFOA) or perfluorooctanesulfonic acid (PFOS), on the structure and organization of lipid membranes was investigated using model membranes-lipid monolayers and bilayers. The simplest model--a lipid monolayer--was studied at the air-water interface using the Langmuir-Blodgett technique with surface pressure and surface potential measurements. Lipid bilayers were characterized by NMR techniques and molecular dynamics simulations. Two phospholipids, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC), characterized by different surface properties have been chosen as components of the model membranes. For a DPPC monolayer, a phase transition from the liquid-expanded state to the liquid-condensed state can be observed upon compression at room temperature, while a DMPC monolayer under the same conditions remains in the liquid-expanded state. For each of the two lipids, the presence of both PFOA and PFOS leads to the formation of a more fluidic layer at the air-water interface. Pulsed field gradient NMR measurements of the lateral diffusion coefficient (DL) of DMPC and PFOA in oriented bilayers reveal that, upon addition of PFOA to DMPC bilayers, DL of DMPC decreases for small amounts of PFOA, while larger additions produce an increased DL. The DL values of PFOA were found to be slightly larger than those for DMPC, probably as a consequence of the water solubility of PFOA. Furthermore, 31P and 2H NMR showed that the gel-liquid crystalline phase transition temperature decreased by the addition of PFOA for concentrations of 5 mol % and above, indicating a destabilizing effect of PFOA on the membranes. Deuterium order parameters of deuterated DMPC were found to increase slightly upon increasing the PFOA concentration. The monolayer experiments reveal that PFOS also penetrates slowly into already preformed lipid layers, leading to a change of their properties with time. These experimental observations are in qualitative agreement with the computational results obtained from the molecular dynamics simulations showing a slow migration of PFCs from the surrounding water phase into DPPC and DMPC bilayers.     

Self-assembly of solid-supported membranes using a triggered fusion of phospholipid-enriched proteoliposomes prepared from the inner mitochondrial membrane

A general procedure for the formation ofsolid-supported artificial membranes containing transmembrane proteins is reported. The main objective was to directly use the pool of proteins of the native biomembrane (here the inner membrane from mitochondria of human carcinogenic hepatic cells) and to avoid purification steps with detergent. Proteoliposomes of phospholipid-enriched inner membranes from mitochondria were tethered and fused onto a tailored surface via a streptavidin link. The failure of some preliminary experiments on membrane formation was attributed to strong nonspecific interactions between the solid surface and the protuberant hydrophilic parts of the transmembrane complexes. The correct loading of uniform membranes was performed after optimization of a tailored surface, covered with a grafted short-chain poly(ethylene glycol), so that nonspecific interactions are reduced. Step-by-step assembly of the structure and triggered fusion of the immobilized proteoliposomes were monitored by surface plasmon resonance and fluorescence photobleaching recovery, respectively. The long-range lateral diffusion coefficient (at 22 degrees C) for a fluorescent lipid varies from 2.5 x 10(-8) cm2 s(-1) for a tethered lipid bilayer without protein to 10(-9) cm2 s(-1) for a tethered membrane containing the transmembrane proteins of the respiratory chain at a protein area fraction of about 15%. The decrease in the diffusion coefficient in the tethered membrane with increase in protein area fraction was too pronounced to be fully explained by the theoretical models of obstructed lateral diffusion. Covalent tethering links with the solid are certainly involved in the decrease of the overall lateral mobility of the components in the supported membrane at the highest protein-to-lipid ratios.     

Continuous lipid bilayers derived from cell membranes for spatial molecular manipulation

Progress with respect to enrichment and separation of native membrane components in complex lipid environments, such as native cell membranes, has so far been very limited. The reason for the slow progress can be related to the lack of efficient means to generate continuous and laterally fluid supported lipid bilayers (SLBs) made from real cell membranes. We show in this work how the edge of a hydrodynamically driven SLB can be used to induce rupture of adsorbed lipid vesicles of compositions that typically prevent spontaneous SLB formation, such as vesicles made of complex lipid compositions, containing high cholesterol content or being derived from real cell membranes. In particular, upon fusion between the moving edge of a preformed SLB and adsorbed vesicles made directly from 3T3 fibroblast cell membranes, the membrane content of the vesicles was shown to be efficiently transferred to the SLB. The molecular transfer was verified using cholera toxin B subunit (CTB) binding to monosialoganglioside receptors (G(M1) and G(M3)), and the preserved lateral mobility was confirmed by spatial manipulation of the G(M1/M3)-CTB complex using a hydrodynamic flow. Two populations of CTB with markedly different drift velocity could be identified, which from dissociation kinetics data were attributed to CTB bound with different numbers of ganglioside anchors.