Determination of ammonium and metal ions by capillary electrophoresis-potential gradient detection using ionic liquid as background electrolyte and covalent coating reagent

A capillary zone electrophoresis (CZE)-potential gradient detection (PGD) method coupled with field-amplified sample injection was developed to determine alkali metal, alkaline-earth metal, nickel, lead and ammonium ions. The capillary surface was coated with dialkylimidazolium-based ionic liquid and thus the electroosmotic flow (EOF) of the capillary was reversed. The buffer composed of 7.5 mM lactic acid, 0.6 mM 18-crown-6, 12 mM alpha-cyclodextrin (alpha-CD); it was adjusted to pH 4.0 by 1-hexyl-3-methylimidazolium hydroxide. The 11 cations were baseline separated within 14 min with 5.1-18.9 x 10(4) plates (for 40-cm-long capillary) in separation efficiency, and the detection limits were in the range of 0.27-7.3 ng/ml. The method showed good reproducibility in terms of migration time with RSD < or = 0.90% for run-to-run and < or = 1.65 for day-to-day assessment.     

Highly efficient separation of isomeric epoxy fatty acids by micellar electrokinetic chromatography

A capillary electrophoresis (CE) method has been developed for simple and direct separation of cis- and trans-12,13-epoxy-9(Z)-octadecenoic acid and 9,10-epoxy-12(Z)-octadecenoic acid isomers. Separation was performed in micellar electrokinetic capillary chromatography (MEKC) using a buffer consisting of 25 mM borate (pH 9.20), 10 mM sodium dodecyl sulfate (SDS) and 10% v/v acetonitrile. The key variables, concentrations of SDS and organic modifier, were optimized by the application of a factorial experimental design. The use of a low micellar concentration, just above critical micelle concentration (CMC), in a background electrolyte containing an organic modifier not only made it possible to dissolve and separate highly hydrophobic fatty acid isomers, but also resulted in improved separation efficiency and selectivity. Separation efficiency up to 4 x 10(5) theoretical plates/m was achieved under an optimized condition. Also investigated were the influence of temperature on separation and the effect of organic modifier concentration on the dynamic exchange of the analytes between micelles and the bulk of the buffer solution. Direct UV was applied for detection of the fatty acids.     

Determination of carbohydrates as their 3-aminophthalhydrazide derivatives by capillary zone electrophoresis with on-line chemiluminescence detection

A method based on pre-capillary derivatization with luminol (3-aminophthalhydrazide) for carbohydrate analysis using capillary electrophoresis with on-line chemiluminescence (CL) detection was developed. The derivatives of seven monosaccharides were separated and detected by using 200 mM borate buffer containing 100 mM hydrogen peroxide at pH 10.0 as separation electrolyte and 25 mM hexacyanoferrate in 3 M sodium hydroxide solution as post-capillary chemiluminescence reagent with separation efficiencies ranging from 160,000 to 231,000 plates per metre. The minimum amount of carbohydrate derivatized was 2 pmol (corresponding to the concentration of 2 microM). The method also provided a linear response for glucose in the concentration range of 0.1-250 microM with a mass detection limit of 420 amol or a concentration detection limit of 0.1 microM. Preliminary work using the CE-CL format to determine glucose in a rat brain microdialysis sample is presented as a typical case.     

Ultrastable substrates for surface-enhanced Raman spectroscopy: Al2O3 overlayers fabricated by atomic layer deposition yield improved anthrax biomarker detection

A new method to stabilize and functionalize surfaces for surface-enhanced Raman spectroscopy (SERS) is demonstrated. Atomic layer deposition (ALD) is used to deposit a sub-1-nm alumina layer on silver film-over-nanosphere (AgFON) substrates. The resulting overlayer maintains and stabilizes the SERS activity of the underlying silver while presenting the surface chemistry of the alumina overlayer, a commonly used polar adsorbent in chromatographic separations. The relative affinity of analytes for alumina-modified AgFON substrates can be determined by their polarity. On the basis of SERS measurements, dipicolinic acid displays the strongest binding to the ALD alumina-modified AgFON among a set of pyridine derivatives with varying polarity. This strong affinity for carboxylate groups makes the SERS substrate an ideal candidate for bacillus spores detection using the dipicolinate biomarker. The SERS signal from extracted dipicolinate was measured over the spore concentration range 10(-14)-10(-12) M to determine the saturation binding capacity of the alumina-modified AgFON surface. The adsorption constant was determined to be Kspore = 9.0 x 10(13) M(-1). A 10-s data collection time is capable of achieving a limit of detection of approximately 1.4 x 10(3) spores. The shelf life of prefabricated substrates is at least 9 months prior to use. In comparison to the bare AgFON substrates, the ALD-modified AgFON substrates demonstrate twice the sensitivity with 6 times shorter data acquisition time and 7 times longer temporal stability. ALD expands the palette of available chemical methods to functionalize SERS substrates, which will enable improved and diverse chemical control over the nature of analyte-surface binding for biomedical, homeland security, and environmental applications.     

Extremely highly efficient on-line concentration and separation of gold nanoparticles using the reversed electrode polarity stacking mode and surfactant-modified capillary electrophoresis

In this study, gold nanoparticles (Au NPs) were separated using the reversed electrode polarity stacking mode (REPSM) of a capillary electrophoresis (CE) system for on-line enhancement prior to performing surfactant-modified CE separation. Under optimized conditions [running electrolyte buffer, sodium dodecyl sulfate (70 mM) and 3-cyclohexylamino-1-propanesulfonic acid (10 mM) at pH 10.0; applied voltage, 20 kV; operating temperature, 25°C; REPSM strategy for sample on-line concentration; REPSM applied prior to initializing separation], two parameters were varied to further enhance the concentration and separation of the Au NPs: (i) the rate of polarity switching (from -20 to +20 kV) between the REPSM and surfactant-modified CE separation modes and (ii) the length of the capillary column. At a polarity switching rate of 1333 kV min(-1) and a column length of ca. 83.5 cm, the resolution of the separation of a mixture of 5.3- and 40.1-nm Au NPs was greater than 19; in addition, the numbers of theoretical plates for the 5.3- and 40.1-nm-diameter Au NPs were greater than 15,000 and up to 1.15×10(7), respectively-the latter being extremely high. Thus, this CE-based method for separating Au NPs provided high performance in terms of separation resolution and the number of theoretical plates, both of which were improved by greater than fivefold relative to those published previously. Notably, the sensitivity enhancement factors for the 5.3- and 40.1-nm-diameter Au NPs were improved (by ca. 20- and 500-fold, respectively) relative to those obtained using conventional surfactant-modified CE separation.     

Electrical detection of germination of viable model Bacillus anthracis spores in microfluidic biochips

In this paper, we present a new impedance-based method to detect viable spores by electrically detecting their germination in real time within microfluidic biochips. We used Bacillus anthracis Sterne spores as the model organism. During germination, the spores release polar and ionic chemicals, such as dipicolinic acid (DPA), calcium ions, phosphate ions, and amino acids, which correspondingly increase the electrical conductivity of the medium in which the spores are suspended. We first present macro-scale measurements demonstrating that the germination of spores can be electrically detected at a concentration of 10(9) spores ml(-1) in sample volumes of 5 ml, by monitoring changes in the solution conductivity. Germination was induced by introducing an optimized germinant solution consisting of 10 mM L-alanine and 2 mM inosine. We then translated these results to a micro-fluidic biochip, which was a three-layer device: one layer of polydimethylsiloxane (PDMS) with valves, a second layer of PDMS with micro-fluidic channels and chambers, and the third layer with metal electrodes deposited on a pyrex substrate. Dielectrophoresis (DEP) was used to trap and concentrate the spores at the electrodes with greater than 90% efficiency, at a solution flow rate of 0.2 microl min(-1) with concentration factors between 107-109 spores ml(-1), from sample volumes of 1-5 microl. The spores were captured by DEP in deionized water within 1 min (total volume used ranged from 0.02 microl to 0.2 microl), and then germinant solution was introduced to the flow stream. The detection sensitivity was demonstrated to be as low as about a hundred spores in 0.1 nl, which is equivalent to a macroscale detection limit of approximately 10(9) spores ml(-1). We believe that this is the first demonstration of this application in microfluidic and BioMEMS devices.     

Rapid detection of an anthrax biomarker by surface-enhanced Raman spectroscopy

A rapid detection protocol suitable for use by first-responders to detect anthrax spores using a low-cost, battery-powered, portable Raman spectrometer has been developed. Bacillus subtilis spores, harmless simulants for Bacillus anthracis, were studied using surface-enhanced Raman spectroscopy (SERS) on silver film over nanosphere (AgFON) substrates. Calcium dipicolinate (CaDPA), a biomarker for bacillus spores, was efficiently extracted by sonication in nitric acid and rapidly detected by SERS. AgFON surfaces optimized for 750 nm laser excitation have been fabricated and characterized by UV-vis diffuse reflectance spectroscopy and SERS. The SERS signal from extracted CaDPA was measured over the spore concentration range of 10(-14)-10(-12) M to determine the saturation binding capacity of the AgFON surface and to calculate the adsorption constant (Kspore=1.7 x 10(13) M(-1)). At present, an 11 min procedure is capable of achieving a limit of detection (LOD) of approximately 2.6 x 10(3) spores, below the anthrax infectious dose of 10(4) spores. The data presented herein also demonstrate that the shelf life of prefabricated AgFON substrates can be as long as 40 days prior to use. Finally, these sensing capabilities have been successfully transitioned from a laboratory spectrometer to a field-portable instrument. Using this technology, 10(4) bacillus spores were detected with a 5 s data acquisition period on a 1 month old AgFON substrate. The speed and sensitivity of this SERS sensor indicate that this technology can be used as a viable option for the field analysis of potentially harmful environmental samples.     

Identification and determination of active components in Angelica dahurica Benth and its medicinal preparation by capillary electrophoresis

A micellar electrokinetic capillary chromatography (MECC) method for the separation of three active components, imperatorin (IM), isoimperatorin (IO) and scopoletin (SC), in Angelica dahurica Benth and its preparation was developed. The optimum separation for these analytes was achieved using 10 mM borate, 20 mM SDS and 10%(v/v) acetonitrile, with applied voltage of 22 kV. All experiments were performed using a 50.0 cm (42.5 cm effective length)x75 mum I.D. fused-silica capillary. The linear calibration range was 12.0-800.0 mug ml(-1) for IM, 10.0-850.0 mug ml(-1) for IO and 3.5-600.0 mug ml(-1) for SC. The recoveries of three constituents were from 91.3 to 108.7%. Also, the dissociation constant (pKa) of SC was determined by the CE method established in this paper.     

Fourier transform infrared spectroscopy with a sample deposition interface as a quantitative detector in size-exclusion chromatography

Micellar electrokinetic capillary chromatography was developed to analyze plant hormones including gibberellic acid, abscisic acid, indole-3-acetic acid, alpha-naphthaleneacetic acid, 2,4-dichlorophenoxyacetic acid, kinetin-6-furfurylaminopurine and N6-benzyladenine. The influences of some crucial parameters including buffer concentration, pH value, micelle concentration and applied voltage on electrophoretic separation were investigated. Under optimum conditions (50 mM borate as the running buffer containing 50 mM sodium dodecylsulfate, pH 8.0; separation voltage: -15 kV; injection: hydrodynamic injection, 5 s at 50 mbar; temperature: 25 degrees C), a complete separation of seven plant hormones was accomplished within 30 min. Emphasis was placed on improving detection sensitivity in order to detect small amounts of hormones in plant tissue. Multiple wavelength detection and expanded bubble cell capillary were used with enrichment factors of 2 and 3, respectively. In addition, an on-line concentration method of large volume sample stacking was designed. Enrichment factors of up to approximately 10-600 were achieved for these hormones with detection limits down to 0.306 ng/ml. The method was successfully applied to analyzing abscisic acid in flowers of transgenic tobacco.     

Development and validation of a simple capillary zone electrophoresis method for the analysis of kanamycin sulfate with UV detection after pre-capillary derivatization

Capillary zone electrophoresis was successfully applied to separate eight related substances of kanamycin and several minor unknowns from the main component. Strategies to enhance derivatization and selectivity and to optimize separation parameters involved the application of experimental designs. This chemometrical approach considers main effects as well as interactions of the influential parameters, thus conducting a more thorough investigation of the method than the common step-by-step approach. Central composite face centered designs established optimal separation conditions: 30 mM borax buffer, pH 10.0 containing 16.0% (v/v) methanol and optimal composition of derivatization reagent: 27 mg/ml 1,2-phthalic dicarboxaldehyde and 25 microl/ml mercaptoacetic acid in borate buffer, pH 10.4. The standard curves were linear over the concentration range of 0.007-1.01 mg/ml for the main component and 0.003-0.1 mg/ml for the related substances. The limit of quantitation was 0.14% (m/m) for the related substances and impurities (S/N= 10). The assay method was used to determine the composition of several commercial samples. Quantitative analysis indicates potential usefulness of capillary electrophoresis as an alternative to the assay method prescribed in the European Pharmacopoeia and the United States Pharmacopeia.     

Separation of related opiate compounds using capillary electrochromatography

Capillary electrophoretic separations have been investigated for six controlled narcotic analgesic compounds having related structures. Owing to the similar charge-to-mass ratios of these compounds, capillary zone electrophoresis failed to provide a satisfactory separation, whereas a baseline-resolved separation was achieved in 10 min using micellar electrokinetic chromatography. Column efficiencies of 40,000-150,000 plates/m were obtained with a 50 cm long, 50 microm inner diameter (ID) capillary using 50 mM sodium dodecyl sulfate (SDS) in a 50 mM borate solution containing 12% isopropanol. In contrast, separation of this mixture by capillary electrochromatography proved to be significantly superior. The capillary was 15 cm long, with an ID of 75 microm, and was packed with 1.5 microm nonporous octadecyl silica (ODS) particles. The mobile phase consisted of 80% 10 mM tris(hydroxymethyl)aminomethane (Tris) and 20% acetonitrile, and contained 5 mM SDS. A complete separation was obtained in 2.5 min with an efficiency of 250,000-500,000 plates/m.     

Determination of sulfonated azo dyes in river water samples by capillary zone electrophoresis

A method based on capillary zone electrophoresis coupled with photodiode-array detection has been developed to determine several sulfonated dyes, including a sulfonated dye (acid yellow 1), and the sulfonated azo dyes acid orange 7, acid orange 12, acid orange 52, acid red 26, acid red 27 and acid red 88. A CElect-FS75 CE column is used. The electrophoresis buffer contains a 1:5 dilution of 10 mM phosphoric acid and tetrabutylammonium hydroxide buffer (pH 11.5), and 25 mM of triethylamine, the final pH being 11.55. The detection limits for the seven dyes ranged from 0.1 to 4.53 microg/ml. Spiked river water samples (100 ml), containing different concentration levels (0.025-0.150 microg/ml) of the dyes were analyzed after acidification (pH 3) and pre-concentration in disposable SPE Oasis HLB, 1 ml cartridges.     

Capillary electrophoretic determination of triamterene, methotrexate, and creatinine in human urine

A capillary zone electrophoresis (CZE) method using a fused-silica capillary (60.2 cm x 75 microm ID) was investigated for the determination of triamterene (TRI), methotrexate (MTX), and creatinine (CREA) in human urine. The separation was performed using a hydrodynamic injection time of 7 s (0.5 psi), a voltage of 25 kV, a capillary temperature of 30 degrees C, and 40 mM phosphoric acid adjusted to pH 2.25 by addition of triethanolamine as separation electrolyte. Under these conditions, analysis takes about 15 min. A linear response over the 0.5-15.0 mg L(-1) concentration range was found for TRI and MTX, and 0.5-80.0 mg L(-1) for CREA. Dilution of the sample (water:urine, 1:1 for TRI and MTX, and 1:25 for CREA determination) was the only step necessary prior to analysis by electrophoresis. The developed method is easy, rapid, and sensitive and has been applied to determine triamterene,methotrexate, and creatinine in urine samples with satisfactory results.     

Capillary zone electrophoresis for the determination of light-absorbing anions in environmental samples.

A rapid and simple method for separation and determination of inorganic anions by capillary zone electrophoresis was described. The detection was carried out directly with a diode array detector. The experimental conditions, such as concentration of carrier electrolyte, capillary length, voltage, and temperature were optimized. In order to improve selectivity, different organic modifiers were also investigated. The baseline separation of 10 light-absorbing anions was accomplished within 3.5 min with a background electrolyte consisting of 50 mM sodium tetraborate containing 5% MeOH. Linear plots were obtained in the concentration range of 0.1-10 microg/ml. With sample stacking injection, the quantitation limits of the anions were found to be in the range of 0.02-0.1 microg/ml. The proposed method was successfully applied to the determination of inorganic anions in environmental samples and in effluents of a power plant.     

Determination of fumaric acid in apple juice by on-line coupled capillary isotachophoresis-capillary zone electrophoresis with UV detection

An on-line coupled capillary isotachophoresis-capillary zone electrophoresis (cITP-CZE) method for the determination of the fumaric acid content in apple juice is presented. A clear separation of fumaric acid in real samples is achieved within 20 min. The leading, terminating and background electrolyte of the employed system consist of 10 mM HCl+beta-alanine+5 mM beta-cyclodextrin+0.05% hydroxypropylmethylcelullose (HPMC), pH 3, 10 mM citric acid and 20 mM citric acid+beta-alanine+5 mM beta-cyclodextrin+0.1% HPMC, pH 3.3, respectively. The linearity, recovery, repeatability and detection limit of the developed method are 25-1000 ng/ml, 1.07%, 95.4+/-3.5 (+/-s)% and 10 ng/ml, respectively. Low laboriousness (no sample pretreatment), sufficient sensitivity and low running cost are the important attributes of the cITP-CZE method which was successfully applied to analyses of real samples of apple juices.     

Improved method for the simultaneous determination of whey proteins, caseins and para-kappa-casein in milk and dairy products by capillary electrophoresis

A capillary electrophoresis method for the simultaneous determination of whey proteins, caseins and their degradation products, such as para-kappa-casein, was proposed. The effect of several parameters (pH, ionic strength and concentration of urea in the electrophoresis buffer and applied voltage) on the analysis time and on the separation efficiency of the major milk proteins was studied. Using a hydrophilically coated capillary, in combination with electrophoresis buffer 0.48 M citric acid-13.6 mM citrate-4.8 M urea at pH 2.3, and a separation voltage of 25 kV, a complete separation of beta-lactoglobulin and para-kappa-casein was achieved, permitting the quantification of both components.     

Enantiomeric separation of citalopram and its metabolites by capillary electrophoresis

A simple and fast capillary electrophoretic method has been developed for the enantioselective separation of citalopram and its main metabolites, namely N-desmethylcitalopram and N,N-didesmethylcitalopram, using beta-cyclodextrin (beta-CD) sulfate as the chiral selector. For method optimisation several parameters were investigated, such as CD and buffer concentration, buffer pH, and capillary temperature. Baseline enantioseparation of the racemic compounds was achieved in less than 6 min using a fused-silica capillary, filled with a background electrolyte consisting of a 35 mM phosphate buffer at pH 2.5 supplemented with 1% w/v beta-CD sulfate and 0.05% w/v beta-CD at 25 degrees C and applying a voltage of -20 kV. A fast separation method for citalopram was also optimized and applied to the analysis of pharmaceutical formulations. Racemic citalopram was resolved in its enantiomers in less than 1.5 min using short-end injection (8.5 cm, effective length) running the experiments in a background electrolyte composed of a 25 mM citrate buffer at pH 5.5 and 0.04% w/v beta-CD sulfate at a temperature of 10 degrees C.     

Separation of carbonyl 2,4-dinitrophenylhydrazones by capillary electrochromatography with diode array detection.

The applicability of capillary electrochromatography (CEC) with photodiode array detection for the analysis of carbonyl hydrazones is presented. The CEC separation of thirteen hydrazones was optimized by a systematic variation of conditions using a commercially available CE system and a 3-micron porous C18-bonded silica capillary column. The separation profile obtained under optimal isocratic conditions (60% actonitrile-4% tetrahydrofuran-5 mM Tris, pH 8) is similar to those reported for gradient HPLC, with significant improvements in efficiency (to 150,000-250,000 theoretical plates/m) and analysis time (by a factor of 4). The retention time reproducibility is better than 0.2% (RSD) from run to run and 1% from day to day. The limits of detection for individual carbonyl hydrazones range between 0.1 and 0.5 microgram/ml. Applications to ambient air and automobile exhaust are shown.     

Chiral separation of benzoporphyrin derivative mono- and diacids by laser induced fluorescence-capillary electrophoresis

A method for the separation of benzoporphyrin derivative mono- and diacid (BPDMA, BPDDA) enantiomers by laser induced fluorescence-capillary electrophoresis (LIF-CE) has been developed. By using 300 mM borate buffer, pH 9.2, 25 mM sodium cholate and 10% acetronitrile as electrolyte, +10 kV electrokinetic sampling injection of 2 s and an applied +20 kV voltage across the ends of a 37 cm capillary (30 cm to the detector, 50 microm ID), all six BPD stereoisomers were baseline-separated within 20 min. Formation constants, free electrophoretic and complexation mobilities with borate and cholate were determined based on dynamic complexation capillary electrophoresis theory. The BPD enantiomers can be quantitatively determined in the range of 10(-2)-10(-5) mg mL(-1). The correlation coefficients (r2) of the least-squares linear regression analysis of the BPD enantiomers are in the range of 0.9914-0.9997. Their limits of detection are 2.18-3.5 x 10(-3) mg mL(-1). The relative standard deviations for the separation were 2.90-4.64% (n = 10). In comparison with high-performance liquid chromatography (HPLC), CE has better resolution and efficiency. This separation method was successfully applied to the BPD enantiomers obtained from a matrix of bovine serum and from liposomally formulated material as well as from studies with rat, dog and human microsomes.     

Determination of plasma heparin by micellar electrokinetic capillary chromatography

The micellar electrokinetic capillary chromatography (MECC) method is reported for the separation of heparin, and for the possibility of direct determination of free heparin in plasma. The conditions for MECC were: pH 8.5, 25 mM sodium dodecyl sulfate (SDS), 25 mM borate buffer, with a 30 cmx50 mum ID fused-silica capillary. The sample was detected with a UV-detector at 270 nm with heparin as external standard. The recovery rate was 95.6-98.7%. This method was linear in the range 80-7000 U l(-1). The within-run and between-run relative standard deviations were lower than 3.1 and 4.5%, respectively. It is suggested that this MECC method may be used to determine blood samples containing high levels of heparin.