An experimental and theoretical investigation on adsorption properties of some diphenolic Schiff bases as corrosion inhibitors at acidic solution/mild steel interface

The effect of novel synthesized three Schiff bases, namely, 1,3-bis[2-(2-hydroxy benzylidenamino) phenoxy] propane (P1), 1,3-bis[2-(5-chloro-2-hydroxybenzylidenamino) phenoxy] propane (P2), and 1,3-bis[2-(5-bromo-2-hydroxybenzylidenamino) phenoxy] propane (P3), on the corrosion of mild steel in 0.1 M HCl was investigated using potentiodynamic polarization and electrochemical impedance spectroscopy methods. Polarization measurements suggest that P1 acts as mixed type inhibitor while P2 and P3 behave as mainly cathodic inhibitors for acidic corrosion of steel. All electrochemical measurements show that inhibition efficiencies increase with increase in inhibitor concentration. This reveals that inhibitive actions of inhibitors were mainly due to adsorption on steel surface. Adsorption of these inhibitors follows Temkin adsorption isotherm. The correlation between the adsorption ability of inhibitors and their molecular structures has been investigated using quantum chemical parameters obtained by MNDO semi-empirical method. Calculated quantum chemical parameters indicate that Schiff bases adsorbed on steel surface by chemical mechanism.     

Corrosion inhibition studies on mild steel in HCl by a newly synthesized benzil monohydrazone based Schiff base

The corrosion inhibition effect of newly formulated Schiff base 2-((E)-((E)-2-hydrazone-1, 2-diphenylethylidene) amino phenol) (HDAP) ligand L derived from Benzil monohydrazone and 2-Aminophenol on mild steel in 1 ​M HCl was examined. Electrochemical (Tafel and EIS) and mass loss techniques were employed to evaluate its corrosion protection efficiency. The inhibition efficiency (η %) was elevated with raise in concentration of compound L.Maximum inhibition efficiency of 94.18% was obtained at 0.01 ​M concentration of HDAP from Tafel polarisation curve. From electrochemical impedance (EIS) studies, it was confirmed that increase in concentration of HDAP led to enhancement of the charge transfer resistance. Both physical and chemical types of adsorptions were observed for the Schiff base via π-bonding electrons which obey Langmuir adsorption isotherm. The SEM picture revealed development of a thin layer on metallic surface. Quantum chemical evaluations were conducted to find out the mechanism of corrosion retardation power of HDAP.     

Effect of three 2-allyl-p-mentha-6,8-dien-2-ols on inhibition of mild steel corrosion in 1 M HCl

2-Allyl-p-mentha-6,8-dien-2-ols P1−P3 synthesized from carvone P are tested as corrosion inhibitors of steel in 1 M HCl using weight loss measurements, potentiodynamic polarisation and impedance spectroscopy (EIS) methods. The addition of 2-allyl-p-mentha-6,8-dien-2-ols reduced the corrosion rate. Potentiodynamic polarisation studies clearly reveal that the presence of inhibitors does not change the mechanism of hydrogen evolution and that they act essentially as cathodic inhibitors. 2-Allyl-p-mentha-6,8-dien-2-ols tested adsorb on the steel surface according to Langmuir isotherm. From the adsorption isotherm some thermodynamic data for the adsorption process are calculated and discussed. EIS measurements show the increase of the charge-transfer resistance with the inhibitor concentration. The highest inhibition efficiency (92%) is obtained for P1 at 3 g/L. The corrosion rate decreases with the rise of temperature. The corresponding activation energies are determined.     

Utilization of biowaste as an eco-friendly biodegradable corrosion inhibitor for mild steel in 1 mol/L HCl solution

This report focuses on the application of a biodegradable biowaste [human hair-(HHR)], to produce a mild steel corrosion inhibitor. The performance of HHR extract in inhibiting metallic corrosion in 1 mol/L HCl was investigated. The analysis of the metal corrosion behavior using electrochemical and weight loss techniques revealed that HHR exhibits an efficient corrosion-mitigating effect via adsorption on the metal surface following a Langmuir isotherm. Tafel-plot results revealed the mixed-mode corrosion protection behavior of HHR. Surface analysis using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), atomic force microscopy (AFM), and Fourier transform infrared (FT-IR) spectroscopy provided evidence for the precipitation of a protective HHR film on the metal surface.     

Interactions and corrosion mitigation prospective of pyrazole derivative on mild steel in HCl environment

The effectiveness of 1H?pyrazole?3,5?dicarboxylic acid 5?benzyl ester 3?phenyl ester (PCBPE) as a preventer for deterioration of IS 513 Gr. D steel in 1 M HCl medium is evaluated via weight loss, electrochemical impedance, and polarization techniques. Kinetic and thermodynamic parameters assessed the feasibility of the adsorption process at diverse temperatures. The inhibition action on mild steel has been enhanced with increasing PCBPE concentration. It is found from the polarization studies that PCBPE behaves as mixed type inhibitor in HCl medium. The adsorption process of PCBPE on mild steel surface from acid environment is favoured Langmuir adsorption isotherm. The shielding efficiency of PCBPE has been enhanced at elevated concentrations, and it has been diminished at amplified temperatures. The Atomic Force Microscope (AFM), Scanning Electron Microscope (SEM), and Energy Dispersive Spectrum (EDS) were used to establish a surface characterization of metal specimens. A quantum chemical analysis of electron density distributions in the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) demonstrated how the inhibitor undergoes adsorption on mild steel in 1 M HCl. All experimental findings substantiate the corrosion mitigation performance of PCBPE on mild steel in acidic environments.     

Corrosion inhibition of mild steel by highly stable polydentate schiff base derived from 1,3- propanediamine in aqueous acidic solution

Recently, the hydrolysis of Schiff bases under experimental conditions gives suspicion for their corrosion inhibition performance. The current study employs a stable Schiff base namely, 2,2′-{propane-1,3-diylbis[azanylylidene (E) methanylylidene]}bis(6-methoxyphenol) (LPD) as corrosion inhibitor for mild steel (MS) in 1 M HCl solution. The presence of the characteristic peak of the imine group in UV-visible spectra was taken as an indicator for LPD stability in acidic media. The inhibition action was examined using electrochemical techniques including potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) besides gravimetric measurement. The inhibition efficiency reached 95.93 % for 0.75 mM LPD after 24 h of immersion at 25 °C. This high efficiency is owing to the presence of the characteristic imine group and other heteroatoms and π- electrons of the aromatic benzene rings. The mechanism of inhibition depends on adsorption phenomena on mild steel surface which obeys Langmuir isotherm model. The calculated values of adsorption equilibrium constant (K_ads), adsorption free energy ΔG_ads, adsorption enthalpy ΔH_ads and adsorption entropy ΔS_ads indicated spontaneous exothermic adsorption process of both physical and chemical nature. By rising temperature, the inhibition efficiency of LPD was decreased. The calculated activation energy was increased as the concentration of LPD increased. LPD was considered as a mixed-type inhibitor as indicated from PDP measurements. The obtained surface morphology and composition analysis using SEM/EDS, AFM and FTIR techniques ensures the high efficiency of LPD as corrosion inhibitor.     

Experimental and theoretical investigation of adsorption and inhibition properties of 2-Amino-1,3,5-triazine-4,6-dithiol against corrosion in hydrochloric acid solution on mild steel

In this work, 2-Amino-1,3,5-triazine-4,6-dithiol (2-ATD) as novel and high efficiency corrosion inhibitor has been investigated for mild steel (MS) corrosion in 0.5 M HCl solution using electrochemical methods, scanning electron microscopy (SEM), energy disperse X-ray spectroscopy (EDX), atomic force microscopy (AFM) and quantum chemical calculation methods. Potentiodynamic polarization (PDP) curves indicate that 2-ATD is mixed type inhibitor, corrosion inhibition efficiency increased with increasing inhibitor concentration and reached its value of 96.5%. Evolution of exposure time versus corrosion behavior of 2-ATD is examined in corrosive medium. While corrosion potential (E_corr) shifted more negative values, polarization resistances (R_p) decreased after 120 h exposure time due to the corrosion process. H₂ volume is measured in uninhibited and inhibited solutions (10 mM 2-ATD) after 120 h exposure time. Very low volume (3.6 mL cm⁻²) of H₂ is obtained on MS electrode in inhibited solution after 120 h of exposure, indicating that 2-ATD covers the entire surface against aggressive attack and retards the both anodic dissolution of MS and cathodic hydrogen evolution reactions. The adsorption process proposal is the Langmuir isotherm which is most suitable. Adsorption and thermodynamic parameters show that 2-ATD has a strong adsorption effect onto MS surface and includes mixed adsorption style (physical and chemical). Corrosion current density increases with increasing temperature and high activation energy (Ea) proves the strong adsorption of 2-ATD on the MS surface. Anti-corrosion mechanism of 2-ATD is described more detail with the potential of zero charge method. SEM, EDX and AFM analysis support the obtained results of electrochemical methods and confirm the existence of protective layer and strong adsorption of 2-ATD on the MS surface. Chronoamperometry test shows that current densities are almost constant whole experiment in the presence of organic film. Finally, quantum chemical calculation method of 2-ATD in blank solution is performed to investigate the active sites for possible attachment with MS surface.     

Adsorption behavior and corrosion inhibitive potential of xanthene on mild steel/sulphuric acid interface

The inhibition of xanthene (XEN) on the corrosion of mild steel in 0.5 M H₂SO₄ was studied by gravimetric and UV–visible spectrophotometric methods at 303–333 K. Results obtained show that XEN act as inhibitor for mild steel in H₂SO₄ solution. The inhibition efficiency was found to increase with increase in XEN concentration but decreased with temperature. Activation parameters and Gibbs free energy for the adsorption process using Statistical Physics were calculated and discussed. The corrosion process in 0.5 M H₂SO₄ in the absence and presence of XEN follows zero-order kinetics. The UV–visible absorption spectra of the solution containing the inhibitor after the immersion of mild steel specimen indicate the formation of a XEN–Fe complex. Quantum chemical calculations using DFT were used to calculate some electronic properties of the molecule in order to ascertain any correlation between the inhibitive effect and molecular structure of xanthene.     

Inhibition of aluminium and mild steel corrosion in acidic medium using Gum Arabic

The corrosion behaviour of mild steel and aluminium exposed to H₂SO₄ solution and their inhibition in H₂SO₄ containing 0.1–0.5 g/L Gum Arabic (GA) used as inhibitor was studied at temperature range of 30–60 °C using weight loss and thermometric techniques. Corrosion rate increased both in the absence and presence of inhibitor with increase in temperature. Corrosion rate was also found to decrease in the presence of inhibitor compared to the free acid solution. Inhibition efficiency increases with increase in concentration of the inhibitor reaching a maximum of 37.88% at 60 °C for mild steel and 79.69% at 30 °C for aluminium at 0.5 g/L concentration of GA. The inhibitor, GA was found to obey Temkin and El-Awady et al. thermodynamic kinetic adsorption isotherm for mild steel and aluminium respectively from the fit of the experimental data at all concentrations and temperatures studied. The phenomenon of chemical adsorption is proposed for mild steel corrosion, while physical adsorption mechanism is proposed for aluminium corrosion. Results obtained for the kinetic/thermodynamic studies indicate that the adsorption of GA onto the metals surface was spontaneous. GA is a better corrosion inhibitor for aluminium than for mild steel.     

Adsorption and corrosion inhibitive properties of piperidine derivatives on mild steel in phosphoric acid medium

The present study describes the inhibition effect of 4-benzyl piperidine (P1), 1,6-bis(4-benzylpiperidine-1-carboxamide)hexane (P2) and bis(4-benzylpiperidine)thiuram disulfide (P3) towards the corrosion of mild steel in 5.5 M H₃PO₄ solution using weight loss measurements and polarization technique. The influence of inhibitor concentration and temperature on the inhibitory behavior of P2 and P3 was investigated. Meanwhile, the inhibition efficiency (IE) was found to depend on the molecule structure and the concentration of piperidine derivatives. The IE for 10^?3 M P2 and P2 in 5.5 M H₃PO₄ is around 90 %. Polarization studies clearly revealed that all the compounds used act as mixed-type inhibitors. Adsorption isotherms were fitted by the Langmuir isotherm. Adsorption energies ( $ \Updelta {\text{G}}^\circ_{\text{ads}} $ and $ \Updelta {\text{H}}^\circ_{\text{ads}} $ ) and kinetic parameters were evaluated. Significant correlations are obtained between inhibition efficiency with the calculated chemical indexes, indicating that the variation of inhibition with structure of the inhibitor may be explained in terms of electronic properties.     

Synergistic inhibition effects between leaves and stem extracts of Sida acuta and iodide ion for mild steel corrosion in 1 M H2SO4 solutions

The synergistic action caused by iodide ions on the corrosion inhibition of mild steel in 1 M H₂SO₄ by leaves and stem extracts of Sida acuta was studied using weight loss and hydrogen evolution methods at 30–60 °C. It was found that the leaves and stem extracts of S. acuta inhibited the acid induced corrosion of mild steel. Addition of iodide ions enhances the inhibition efficiency to a considerable extent. The inhibition efficiency increases with increase in the iodide ion concentration but decreases with rise in temperature. Adsorption of the extracts alone and in combination of iodide ion was found to obey Freundlich adsorption isotherm at all temperatures studied. Inhibition mechanism is deduced from the temperature dependence of the inhibition efficiency as well as from assessment of kinetic and activation parameters that govern the processes. The synergism parameter (S₁) is defined and evaluated from the inhibition efficiency values. This parameter for the different concentrations of iodide ions from the two techniques employed is found to be greater than unity indicating that the enhanced inhibition efficiency of the extracts caused by the addition of iodide ions is due to synergism.     

Experimental,Monte Carlo and molecular dynamics simulations to investigate corrosion inhibition of mild steel in hydrochloric acid solutions

The efficiency of three furan derivatives, namely 2-(p-toluidinylmethyl)-5-methyl furan (Inh. A), 2-(p-toluidinylmethyl)-5-nitro furan (Inh. B) and 2-(p-toluidinylmethyl)-5-bromo furan (Inh. C), as possible corrosion inhibitors for mild steel in 1.0 M HCl, has been determined by weight loss and electrochemical measurements. These compounds inhibit corrosion even at very low concentrations, and 2-(p-toluidinylmethyl)-5-methyl furan (Inh. A) is the best inhibitor. Polarization curves indicate that all compounds are mixed-type inhibitors, affecting both cathodic and anodic corrosion currents. Adsorption of furan derivatives on the mild steel surface follows the Langmuir adsorption isotherm, and the calculated Gibbs free energy values confirm the chemical nature of the adsorption. Monte Carlo simulations technique incorporating molecular mechanics and molecular dynamics can be used to simulate the adsorption of furan derivatives on mild steel surface in 1.0 M HCl.     

Extract sarampa wood (Xylocarpus Moluccensis) as an eco-friendly corrosion inhibitor for mild steel in HCl 1M

Plant extracts are currently being used as eco-friendly corrosion inhibitors. In this study, the inhibitive performance of Xylocarpus Moluccensis extract (XME) was used as an eco-friendly corrosion inhibitor for the first time. The extract was studied using electrochemical measurement on mild steel in 1M HCl. Results from FIR and phytochemical confirmed that Xylocarpus Moluccensis extract contains compound hydroxyl group, phenolic, and flavonoid content which can be used as a corrosion inhibitor. The inhibition efficiency was determined using Tafel polarization and electrochemical impedance spectroscopy and showed 68% efficiency in 500 ppm. Langmuir adsorption isotherm was used to determine the adsorption mechanism of XME. Surface characterization (AFM) was also used to study the surface morphology of protective film inhibitors.     

Investigation on corrosion inhibition and adsorption mechanism of azomethine derivatives at mild steel/0.5 ​M ​H2SO4 solution interface: Gravimetric,electrochemical, SEM and EDX studies

The inhibition performance of five azomethine derivatives such as: 1-(4-Methyloxy phenylimino)-1-(phenylhydrazono)-propan-2-one (SB₁), 1-(4-Methylphenylimino)-1-(phenylhydrazono) propan-2-one (SB₂), 1-(phenylimino)-1(phenylhydrazono)-propan-2-one (SB₃), 1-(4-Bromo phenylimino)-1(phenylhydrazono)-propan-2-one (SB₄) and 1-(4-Chlorophenylimino)-1(phenylhydrazono) -propan-2-on (SB₅) as corrosion inhibitors for mild steel in sulfuric acid 0.5 ?M were investigated using different methods. All experimental results demonstrate that these compounds are eficients inhibitors. The inhibition efficiencies ($IE$) increase with inhibitors concentration. At 7.5 $\times$ 10^?5 ?M, the $IE$ was 97.27%, 96.31%, 94.23%, 93.19 and 91.64% for SB₁, SB₂, SB₃, SB₄ and SB₅, respectively. The potentiodynamic polarization results indicated that all the studied inhibitors act as mixed type. The adsorption process on mild steel surface obeyed Langmuir isotherm. The associated activation parameters and thermodynamic have been calculated and discussed. The adsorbed film formed on the metal surface was characterized by SEM and EDX.     

Fluconazole as an inhibitor for aluminium corrosion in 0.1 M HCl

The interfacial behavior of fluconazole (FLC) between aluminium and hydrochloric acid has been investigated by using weight loss technique at 30–50 °C. The results showed that fluconazole is an excellent corrosion inhibitor for aluminium in acidic medium. Inhibition efficiency increased with increase in the concentrations of fluconazole but decreased with rise in temperature. The adsorption of the inhibitor on the aluminium surface is found to accord with Temkin adsorption isotherm. Some thermodynamic and activation parameters have been calculated and analysed. The mechanism of physical adsorption is proposed from the values of E_a and obtained. The correlation of inhibition effect and molecular structure of fluconazole was then discussed by quantum chemistry study to further provide insight into the mechanism of the inhibitory action.     

Inhibitive action of ethanol extracts from Nauclea latifolia on the corrosion of mild steel in H2SO4 solutions and their adsorption characteristics

The inhibitive action of ethanol extracts from leaves (LV), bark (BK) and roots (RT) of Nauclea latifolia on mild steel corrosion in H₂SO₄ solutions at 30–60 °C was studied using weight loss and gasometric techniques. The extracts were found to inhibit the corrosion of mild steel in H₂SO₄ solutions and the inhibition efficiencies of the extracts follow the trend: RT > LV > BK. The inhibition efficiency increased with the extracts concentration but decreased with temperature rise. Physical adsorption of the phytochemical components of the plant on the metal surface is proposed as the mechanism of inhibition. The adsorption characteristics of the inhibitor were approximated by the thermodynamic-kinetic model of El-Awady et al.     

Investigation of the electroactivity of polymethylthiophene film for the corrosion protection of mild steel

The protection mechanism of intrinsically conducting polymers (ICPs) is still under discussion. Most of the discussions concentrate on the effect of the redox behavior and electroactivity of ICPs on the corrosion protection. In the present paper it is shown that polymethylthiophene (PMT) films electropolymerized on mild steel, with 2-(3-thienyl)ethylphosphonic acid used as adhesion promoter, show the desired redox activity. The interaction between the PMT film and some conventional coatings, and the influence of the pH of electrolyte, were investigated. It was shown that the electroactivity of PMT film is lost by the interaction with coatings of high nucleophilicity and is markedly decreased by immersion in an aqueous solution of pH 11.     

Corrosion inhibition of carbon steel in hydrochloric acid 0.5 M by hexa methylene diamine tetramethyl-phosphonic acid

The efficiency of hexa methylene diamine tetra methyl-phosphonic acid (HMDTMP), as corrosion inhibitor for carbon steel in 0.5 M HCl, has been determined by gravimetric and electrochemical measurements. Polarization curves indicate that the compound is a mixed inhibitor, affecting both cathodic and anodic corrosion currents. Adsorption of HMDTMP derivatives on the carbon steel surface is in agreement with the Langmuir adsorption isotherm model, and the calculated Gibbs free energy value confirms the chemical nature of the adsorption. EIS results show that the charge in the impedance parameters (R_t and C_dl) with concentrations of HMDTMP is indicative. The adsorption of this molecule leads to the formation of a protective layer on carbon steel surface. The electrochemical results have also been supplemented by surface morphological studies.