Development and validation of a liquid chromatographic method for monitoring of process-related synthetic organic impurities of profenofos in technical products

A simple and rapid reversed-phase high-performance liquid chromatographic method for the monitoring of process-related synthetic organic impurities of profenofos (PFS) is developed. Impurities are separated and determined on a reversed-phase Hypersil C(18) column using gradient elution of 50 mM ammonium formate buffer-acetonitrile as a mobile phase and detection at 230 nm at ambient temperature. The method is validated with respect to accuracy, precision, linearity, and limits of detection and quantitation. The method is found to be suitable not only for monitoring the reactions involved in the process development of PFS, but also quality assurance, as it can detect impurities at the level of 1.5 x 10(-8) g.     

Development and validation of a liquid chromatographic method for fexofenadine hydrochloride in capsules

This paper describes the development and validation of a new, simple, fast, and sensitive liquid chromatographic method for the determination of the antihistamine fexofenadine. Although widely used in the treatment of allergic diseases, fexofenadine is not listed in any pharmacopeia, and there are few methods in the literature for its quantitation in pharmaceutical dosage forms. In this work, a LiChrospher 100 RP-18 (250 x 4.0 mm, 5 microm) column was used as the stationary phase, and acetonitrile-5mM ammonium acetate buffer (50 + 50, v/v) at pH 3.2 was the mobile phase. Through the evaluation of the analytical parameters, it was shown that the method is linear (r = 0.9999) at concentrations ranging from 20.0 to 80.0 microg/mL, precise (intraday relative standard deviation [RSD] values = 0.85, 0.40, and 0.81%; interday RSD = 0.77%), accurate (mean recovery = 99.05%), specific, and robust. The detection and quantitation limits are 0.3409 and 1.033 microg/mL, respectively. These low values show the good sensitivity of the proposed method.     

Development and validation of a liquid chromatographic method for the determination of hydroxymethylfurfural and alpha-ketoglutaric acid in human plasma

Hydroxymethylfurfural (HMF) and alpha-ketoglutaric acid (KG) have been recently investigated as potential cancer cell damaging agents. We herein report for the first time a validated quantitative assay for their simultaneous determination in human plasma which is amenable to be applied in the future screening of the target compounds in human probands in order to properly design a targeted chemotherapeutic regimen for certain types of malignant tumors.A simple liquid chromatographic method in conjunction to derivatization after a two-step optimized solid phase clean-up procedure is described. The method is based on the reaction of HMF and KG with 2-nitrophenylhydrazine or 2,4-dinitrophenylhydrazine in an aqueous environment. Reaction conditions were studied with respect to pH, reagent volume, reaction temperature and time. Exact testing of such parameters beside careful selection of the mobile phase composition rendered feasible the quantification of the chemically significantly differing analytes along a single chromatographic run. The formed derivatives could be separated isocratically by reversed-phase LC on a C₈-column. Detection in the UV and in the visible range is possible. Results showed good recovery and reproducibility with detection limits (S/N = 3) down to 2 picomoles analyte on column. Resolution of the syn and anti geometric isomers of the HMF and KG derivatives is possible. The isomeric ratio in relation to the reaction pH is discussed.     

Development and use of a stability-indicating high-performance liquid chromatographic assay for Meldrum's acid.

A high-performance liquid chromatographic method was developed that separates Meldrum's acid from its primary decomposition products, malonic acid and acetone. The method uses a reversed-phase column under isocratic conditions, with detection by ultraviolet absorption at 210 nm. Quantitation of the parent molecule and the acid decomposition product was possible over concentration ranges of 0.1-10.0 and 0.1-2.0 mg/ml, respectively. Acetone could be determined only at much higher concentrations. Using the malonic acid concentration as a measure of decomposition, this method was used to determine the hydrolytic stability of Meldrum's acid and its skin penetration properties.     

High-performance liquid chromatographic method for isolating organic contaminants from tissue and sediment extracts

Interest in the assessment of the anthropogenic contamination of the marine environment has accelerated in recent years. Existing methods to analyze environmental samples (e.g., sediments or tissues) for trace amounts of organic contaminants such as aromatic hydrocarbons and chlorinated compounds are tedious and costly. We report a rapid, efficient high-performance liquid chromatography (HPLC) procedure which uses a size-exclusion column to separate the analytes of interest from interfering compounds in the sample matrix. Analytical results from the HPLC method were, in general, comparable to a gravity-column method which had been used for several years. The HPLC method had several other advantages: improved precision; the ability to monitor chromatographic conditions; the potential for automating analyses; and reduced consumption of solvents and other materials.     

Development of a new high-performance liquid chromatographic method for the determination of ceftazidime

A rapid, accurate, and sensitive high-performance liquid chromatographic (HPLC) method was developed and validated for the determination of ceftazidime in pharmaceuticals. The method validation parameters yielded good results and included range, linearity, precision, accuracy, specificity, and recovery. The excipients in the commercial powder for injection did not interfere with the assay. Reversed-phase chromatography was used for the HPLC separation on a Waters C18 (WAT 054275; Milford, MA) column with methanol-water (70 + 30, v/v) as the mobile phase pumped isocratically at a flow rate of 1.0 mL/min. The effluent was monitored at 245 nm. The calibration graph for ceftazidime was linear from 50.0 to 300.0 microg/mL. The values for interday and intraday precision (relative standard deviation) were <1%. The results obtained by the HPLC method were calculated statistically by analysis of variance. We concluded that the HPLC method is satisfactory for the determination of ceftazidime in the raw material and pharmaceuticals.     

Rapid high-performance liquid chromatographic method for the determination of peroxyacetic acid

The selective oxidation of methyl p-tolyl sulfide (MTS) to the corresponding sulfoxide (MTSO) by peroxyacetic acid and the subsequent rapid separation of the sulfide and sulfoxide are the basis for a fast and reliable HPLC method for the determination of this oxidizing agent in the presence of hydrogen peroxide. The time required for chromatographic separation was reduced to less than 1 min. To improve the long-term stability of the sulfoxide solution, hydrogen peroxide was decomposed catalytically by manganese dioxide. Even in the presence of a tenfold molar excess of hydrogen peroxide, a storability of at least 20 h without a significant increase in MTSO concentration was achieved. External calibration can be performed using the stable and commercially available MTSO. Real samples from a brewery cleaning-in-place disinfection process were analysed and the results were compared with those of the classical two-step titration.     

Solubilities of cinnamic acid,phenoxyacetic acid and 4-methoxyphenylacetic acid in supercritical carbon dioxide

The solid solubilities of cinnamic acid, phenoxyacetic acid and 4-methoxyphenylacetic acid in supercritical carbon dioxide were measured using a semi-flow apparatus. The experiments were taken at 308.2, 318.2 and 328.2 K. The pressure range was from 11 to 24 MPa. These data were confirmed as equilibrium solid solubilities based on a plug flow mass transfer model. The solid solubilities were further correlated using the equations of state or semi-empirical models. The correlation results are satisfactory with optimally fitted binary interaction parameters in the Peng–Robinson equation of state.     

A clean and rapid liquid chromatographic technique for sulfamethazine monitoring in pork tissues without using organic solvents

A rapid method for the isolation and high-performance liquid chromatographic (HPLC) determination of sulfamethazine (SMZ) in pork tissues (kidney, liver, and muscle) without using organic solvents is developed. The isolation is performed by homogenization with an acid solution using an ultrasonic-homogenizer, followed by centrifugation. The HPLC analyses are performed using a reversed-phase C(4) column (150- x 4.6-mm i.d.), a mobile phase of 0.02 mol/L citric acid solution, and a photodiode array detector. The resulting HPLC chromatograms are free from interferences for determination and identification. The proposed technique is shown to be linear (r > 0.99) over the concentration range 0.1-2.0 microg/g for all pork tissues. Average recoveries of SMZ (spiked 0.1-2.0 microg/g) range from 87.6% to 90.2%, with inter- and intra-assay variabilities of less than 4%. The total time required for the analysis of one sample and limit of quantitation is less than 20 min and 0.09 microg/g, respectively.     

Validation of a column liquid chromatographic method for phytate

A column liquid chromatographic method that uses a spectrophotometric detector for the analysis of phytate and other inositol phosphates in foodstuffs and seeds is described. It has been tested thoroughly and sent to 6 other laboratories where there was an interest in such an analytical method and the equipment was available for performing it. These samples were blinded to the individual collaborators. Also sent was a standard wheat bran sample available from the American Association of Cereal Chemists with a standard phytate value reported as 3.2%. The postcolumn sulfosalicylic acid reaction was developed in the 1950s as an analytical method for ferric ion. All reagents are aqueous solutions and the specific pH values of each are important. The column separation is at pH 4, which dissociates all phosphate analogs. The ferric sulfosalicylate is at pH 1.8. The postcolumn reaction is then at pH 2.0-2.3. At this pH, the sulfosalicylate complexes one ferric ion and will yield it to a stronger complexing agent such as a phosphate ester. At higher pH values, sulfosalicylate complexes 2 ferric ions and will yield neither to these anions. The method sensitivity is 8-12 nmoles/injection.     

High-performance liquid chromatographic method for screening disorders of aromatic acid metabolism using a multi-detection system

This paper describes the use of a high-performance liquid chromatograph equipped with an ultraviolet multi-detection system for the analysis of aromatic acids to help establish a high-risk screening system for disorders of organic acid metabolism. The peak height ratios of about seventy metabolically important aromatic acids have been compiled using the multi-detection system. It may be possible to identify aromatic acids by comparing retention time and peak height ratios. The method was very effective for the diagnosis of disorders of aromatic acid metabolism.     

Development and validation of a reversed-phase liquid chromatographic method for analysis of demeclocycline and related impurities

A simple, robust, and rapid reversedphase high-performance liquid chromatographic method for the analysis of demeclocycline and its impurities is described. Chromatographic separations were achieved on a Symmetry Shield RP8 (75 mm × 4.6 mm, 3.5 μm) column kept at 40°C. The mobile phase was a gradient mixture of acetonitrile, 0.06 M sodium edetate (pH 7.5), 0.06 M tetrapropylammonium hydrogen sulphate (pH 7.5) and water, A (2:35:35:28 v/v/v/v) and B (30:35:35:0 v/v/v/v) pumped at a flow rate of 1 mL/min. UV detection was performed at 280 nm. The developed method was validated according to the ICH guidelines for specificity, limit of detection, limit of quantification, linearity, precision, and robustness. An experimental design was applied for robustness study. Results show that the peak shape, chromatographic resolution between the impurities, and the total analysis time are satisfactory and better than previous methods. The method has been applied for the analysis of commercial demeclocycline bulk samples available on the market.     

Simple reversed-phase high-performance liquid chromatographic method for 13-cis-retinoic acid in serum.

An isocratic reversed-phase high-performance liquid chromatographic method for the analysis of 13-cis-retinoic acid in serum is developed. Sample preparation includes deproteination with acetonitrile-perchloric acid-acetic acid followed by centrifugation. 9-Methylanthracene is used as the internal standard. Chromatographic separation is achieved on a C18 column (Zorbax) using an acetonitrile-aqueous 0.5% acetic acid (85:15, v/v) eluent containing 0.05% (w/v) sodium hexanesulfonate. The limit of detection is 12 ng/ml in serum, using 0.5 ml samples. Quantitative recoveries and excellent intra-day and inter-day precision are reported.     

Analysis of aspartic acid racemization. Evaluation of a chiral capillary gas chromatographic and a diastereomeric high-performance liquid chromatographic method

A recently developed chiral gas chromatographic method and a diastereomeric high-performance liquid chromatographic method for the analysis of aspartic acid enantiomers in protein hydrolyzates have been evaluated. Although both techniques are fast and convenient, the latter is preferred because of its higher reproducibility and shorter analysis time. Furthermore, this method offers the possibility of on-line derivatization and analysis.     

Development and validation of a new high-performance liquid chromatographic method for the loperamid hydrochloride determination in drugs

A selective, precise and new high-performance liquid chromatographic method for the analysis of loperamid hydrochloride in pharmaceutical formulations was developed and validated. The mobile phase consisting buffer (sodium-octansulphonate, triethylamine and ammonium hydroxide) in water: acetonitriie (45: 55, v/v) (pH 3.2). The absorbance was monitored with a DAD detector at 226 nm. The flow rate was 1.5 cm³ min⁻¹. The linearity (r = 0.9947) and the recovery (98.58–100.42%) were found to be satisfactory. The detection and quantitation limits were found to be 0.95 and 3.12 μg cm⁻³. The results demonstrated that the procedure was accurate, precise and reproducible. It can be suitably applied for the estimation of lopera-mid hydrochloride in pharmaceutical formulations. The article is published in the original.