A high-spin and durable polyradical: poly(4-diphenylaminium-1,2-phenylenevinylene)

A purely organic, high-spin, and durable polyradical molecule was synthesized: It is based on the non-Kekulé- and non-disjoint design of a pi-conjugated poly(1,2-phenylenevinylene) backbone pendantly 4-substituted with multiple robust arylaminium radicals. 4-N,N-Bis(4-methoxy- and -tert-butylphenyl)amino-2-bromostyrene 5 were synthesized and polymerized with a palladium-phosphine catalyst to afford the head-to-tail-linked polyradical precursors (1). Oxidation of 1 with the nitrosonium ion solubilized with a crown ether gave the aminium polyradicals (1(+)()) which were durable (half-life > 1 month) at room temperature in air. A high-spin ground state with an average S = (4.5)/2 for 1a(+) was proved even at room temperature by magnetic susceptibility, magnetization, ESR, and NMR measurements.     

A nanometer-sized high-spin polyradical: poly(4-phenoxyl-1,2-phenylenevinylene) planarily extended in a non-Kekulé fashion and its magnetic force microscopic images.

A pi-conjugated, but non-Kekulé- and nondisjoint-type poly(1,2-phenylenevinylene) network bearing 4-substituted di-tert-butylphenoxyls was synthesized through a one-pot polycondensation of the star-shaped subpart and the subsequent oxidation, which was persistent even at room temperature. The polyphenoxyl radical with a spin concentration of 0.4 displayed an average S of 10/2. The polyradical with the molecular weight of 3.2 x 10(4) gave a disklike image of ca. 35 x 0.6 nm with both an atomic and a magnetic force microscopy: the molecular image was examined as a nanoscale and single-molecular-based magnetic dot.     

Dendron-combined poly(4-diphenyl- aminium-1,2-phenylenevinylene): an isolated multiplet molecule

[structure: see text] Poly[4-(N,N-bis(4-3,5-bis(3,5-bis(benzyloxy)benzyloxy)benzyloxyphenyl)amino)-1,2-phenylenevinylene] was prepared by the palladium-catalyzed polycondensation of the dendron-coupled bromostyrene and oxidized to yield the corresponding poly(aminium cationic radical): The dendron-combined polyradical molecule displayed both a substantial chemical stability and a multiplet state without any intermolecular interaction.     

m-Phenylene-linked aromatic poly(aminium cationic radical)s: persistent high-spin organic polyradicals

[structure: see text] High molecular weight and networked aromatic polyamines prepared by palladium-catalyzed polycondensation were oxidized to yield the corresponding poly(aminium cationic radical)s, which displayed a substantial stability and an intramolecular ferromagnetic interaction of eight or nine spins.     

Poly[4,6-bis(bis(4-methoxyphenyl)aminium)-1,2-phenylenevinylene]: A high-spin and durable polyradical

A purely organic and high-spin polyradical molecule was synthesized, along the non-Kekulé and non-disjoint design of the π-conjugated poly(1,2-phenylenevinylene) backbone pendantly 4,6-substituted with the robust arylaminium radicals. 4,6-Bis(bis(4-methoxyphenyl)amino)-2-bromostyrene was synthesized and polymerized with a Pd–phosphine catalyst to afford the head-to-tail linked polyradical precursor. Oxidation of the polymer with SbCl₅ gave the aminium polyradical with a half-life of >10 days at room temperature. A high-spin ground state with an average S = 5/2 for this polyradical was proved by magnetic susceptibility and ESR.     

New hyperbranched poly([1,2,3]-triazole-[1,3,5]-triazines)

New hyperbranched polymers have been synthesized through the 1,3-dipolar polycycloaddition of the AB₂ monomer—2-azido-4,6-bis(propynyloxy)-[1,3,5]-triazine. The polymers contain conjugated heteroaromatic triazine and triazole cycles and terminal acetylene groups. The products have been characterized by exclusion liquid chromatography and IR and ¹H NMR studies.     

A tetranuclear 3d-4f single molecule magnet: [CuIILTbIII(hfac)2]2

We report now the first single molecule magnet (SMM) consisting of d-f elements. The present study demonstrates that the synthesis of the d-f polynuclear molecule is a very promising approach to SMMs. (1) The d-f polynuclear molecule can be easily synthesized by the assembly reaction of the d-component and the f-component, (2) the high-spin ground state can be generated by a smaller number of metal ions than the d complex, and (3) the molecular magnetic anisotropy is easily derived from the f-component.     

Vibrations of a single adsorbed organic molecule: anharmonicity matters!

Vibrational spectroscopy is a powerful tool to identify molecules and to characterise their chemical state. Inelastic electron tunnelling spectroscopy (IETS) combined with scanning tunnelling microscopy (STM) allows the application of vibrational analysis to a single molecule. Up to now, IETS was restricted to small species due to the complexity of vibration spectra for larger molecules. We extend the horizon of IETS for both experiment and theory by measuring the STM-IETS spectra of mercaptopyridine adsorbed on the (111) surface of gold and comparing it to theoretical spectra. Such complex spectra with more than 20 lines can be reliably determined and computed leading to completely new insights. Experimentally, the vibrational spectra exhibit a dependence on the specific adsorption site of the molecules. Theoretically, this dependence is only accessible if anharmonic contributions to the interaction potentials are included. These joint experimental and theoretical advances open new perspectives for structure determination of organic adlayers.     

Synthesis and ionic conductivity of hyperbranched poly(glycidol)

A novel hyperbranched poly(glycidol) (HPG) was prepared and characterized. The synthesized HPG was used as a substrate of a polymer electrolyte. The ionic conductivity of a blend of HPG, polyurethane (PU), and salt was studied. The ionic conductivity of HPG/PU/LiClO₄ was about 6.6 × 10^?6 S · cm^?1 at 20 °C and 6.3 × 10^?4 S · cm^?1 at 60 °C. The results indicated that HPG showed higher solubility for salt than linear polyether when both had the same [O]/[Li⁺] molar ratio. The main reason was that more cavities and a lower degree of chain entanglement in HPG resulted in a lower glass‐transition temperature and were beneficial for decreasing the aggregation of salt or enhancing the ionic conductivity. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2225–2230, 2001     

Perfectly branched and hyperbranched poly(ether amide)s

Poly(ether amide) dendrimer segments based on 5-(2-aminoethoxy)-isophthalic acid have been synthesized using the convergent approach and mild reaction conditions. The monodendrons were combined to dendrimers via different core molecules and the resulting properties of the molecules were compared to those of the monodendrons. The melt polycondensation of the AB₂ monomers with analog structure resulted first in undefined polymer structures. However, by thermal polyaddition reaction of suitable functionalized oxazoline monomers, well defined hyperbranched poly(ether amide)s with phenol terminal groups could be synthesized.     

Sorption and diffusion of organic vapors in poly[bis(trifluoroethoxy) phosphazene] and poly[bis(phenoxy)phosphazene] membranes

The sorption isotherms and diffusivities for vapors of some selected simple alcohols (methanol, ethanol, isopropanol, and 2-butanol), ketones (acetone, methyl ethyl ketone, and methyl isobutyl ketone), and aromatic compounds (benzene, toluene, and xylene) in poly[bis(trifluoroethoxy)phosphazene] (PTFEP) and poly[bis(phenoxy)phosphazene] (PPOP) were determined by integral sorption-desorption experiments at 35°C. The sorption isotherms for these compounds evaluated were almost linear to obey Henry's law for the determination of constant solubility of each solvent vapor species, and the corresponding permeabilities for them can be estimated according to the solution-diffusion model. The diffusivities for these vapors in PPOP (10⁻⁹∼10⁻⁸ cm²/s) were about one order smaller than those in PTFEP (10⁻⁸∼10⁻⁷ cm²/s) because the more rigid phenoxy groups and the higher crystallinity in PPOP may hinder the diffusion of sorbed molecules. Relatively weak dependence of diffusivity or permeability on the vapor activity (or concentration) was found, to be in contrast to the exponential dependence for many organic vapors in rubbery organic polymers, probably due to the limited increase of the free volume in sorption for these vapors in PTFEP and PPOP membranes.     

SYNTHESIS AND PHOTOLUMINESCENCE OF AN ANTHRACENE-CONTAINING HYPERBRANCHED POLY（ARYLENEETHYNYLENE）

A hyperbranched poly（aryleneethynylene） containing anthracene chromophore was synthesized by palladiumcatalyzed cross-coupling reaction of 2,4,6-triiodophenyl 9-anthracenylcarboxylate with 9,9-bis[4-（2-propynyloxy）phenyl]- 9H-fluorene. The structure and properties of the polymer are characterized and evaluated by NMR, IR, UV, PL and TGA analyses. The polymer is soluble in common organic solvents, possesses high thermal stability （Td 〉 330℃）, and emits a strong blue light of 465 nm in both solution and solid states.     

Photolysis of polyesters: Poly(propylene-1,2-maleate) and poly(propylene-1,2-ortho-phthalate)

A spectroscopic study of the photo-oxidation of poly(propylene-1,2-maleate), poly(propylene-1,2-o-phthalate) and poly(propylene-1,2-maleate-o-phthalate) under 280–480 nm radiation was investigated in detail. Results obtained indicate that, during photolysis of these polyesters, the primary photoreactions involve excitation of conjugated structures: carbonyl groups (in ester groups)—double bonds or carbonyl groups-phenylene rings. The secondary reactions occur by complicated mechanisms resulting in oxidation, scission, radical termination and cross-linking of structures present in the photolysed polyesters. Light of wavelength 280–480 nm causes deterioration in the polyesters in the early stages of irradiation. Singlet oxygen does not react with these polyesters even during long periods of exposure. Photo-oxidation mechanism occurs by free radical mechanism.     

Protein adhesion on silicon-supported hyperbranched poly(ethylene glycol) and poly(allylamine) thin films

Hyperbranching poly(allylamine) (PAAm) and poly(ethylene glycol) (PEG) on silicon and its effect on protein adhesion was investigated. Hyperbranching involves sequential grafting of polymers on a surface with one of the components having multiple reactive sites. In this research, PAAm provided multiple amines for grafting PEG diacrylate. Current methodologies for generating PEG surfaces include PEG-silane monolayers or polymerized PEG networks. Hyperbranching combines the nanoscale thickness of monolayers with the surface coverage afforded by polymerization. A multistep approach was used to generate the silicon-supported hyperbranched polymers. The silicon wafer surface was initially modified with a vinyl silane followed by oxidation of the terminal vinyl group to present an acid function. Carbodiimide activation of the surface carboxyl group allowed for coupling to PAAm amines to form the first polymer layer. The polymers were hyperbranched by grafting alternating PEG and PAAm layers to the surface using Michael addition chemistry. The alternating polymers were grafted up to six total layers. The substrates remained hydrophilic after each modification. Static contact angles for PAAm (32-44 degrees) and PEG (33-37 degrees) were characteristic of the corresponding individual polymer (30-50 degrees for allylamine, 34-42 degrees for PEG). Roughness values varied from approximately 1 to 8 nm, but had no apparent affect on protein adhesion. Modifications terminating with a PEG layer reduced bovine serum albumin adhesion to the surface by approximately 80% as determined by ELISA and radiolabel binding studies. The hyperbranched PAAm and PEG surfaces described in this paper are nanometer-scale, multilayer films capable of reducing protein adhesion.     

Spectroscopic studies on 2-[2-(4-methylquinolin-2-yl)hydrazono]-1,2-diphenylethanone molecule and its metal complexes

The electronic absorption spectra of a hydrazone: 2-[2-(4-methylquinolin-2-yl)hydrazono]-1,2-diphenylethanone (BHQ) derived from 2-hydrazino-4-methylquinoline and 1,2-diphenylethan-1,2-dione (benzil) have been studied in various solvents of different polarities. The dependence of the band shift Δύ on the solvent parameters viz. D, Z, E_T, DN, AN, α, β and π* was discussed. Also, the effect of pH on the free hydrazone and its Co(II), Ni(II) and Cu(II) complexes was studied spectrophotometrically in 75% (v/v) dioxane–water in order to determine the dissociation and stability constants. The stoichiometry of the formed complexes was determined by three different methods: Job's, mole ratio and slope ratio which indicate the formation of 1:2, M:L complexes for Co(II) and Cu(II) and 1:1, Ni(II):L. Beer's law is valid in the range 0.32–7.04 μg/mL depending on the type of the metal ion. The use of BHQ as an indicator via a spectrophotometric titration of Cu(II) and Ni(II) with EDTA was efficient.     

A novel synthesis of linear high-molecular-weight poly(4-vinylphenol) and poly[styrene-co-(4-vinylphenol)]

A novel synthesis of linear high-molecular-weight poly(4-vinylphenol) (PVPh) and poly[styrene-co-(4-vinylphenol)] (STVPh, 2 ) via demethylation reaction is developed. The parent polymers, poly(4-methoxystyrene) and poly[styrene-co-(4-methoxystyrene)] produced by free-radical polymerization, are converted to PVPh and STVPh ( 2 ), respectively, by being treated with trimethylsilyl iodide (TMSI) at room temperature. Both ¹H NMR and ¹³C NMR data show that methoxy is completely cleaved and converted to hydroxy after hydrolysis without crosslinking and other side reactions. In addition, size-exclusion chromatography data show that no chain scission occurs during group conversion.     

The absorption of organic liquids in poly(aryl-ether-ether-ketone) [PEEK]

The absorption and subsequent desorption of benzene, toluene, carbon disulfide, and chloroform in amorphous and 27% crystalline poly (aryl-ether-ether-ketone) (PEEK) were determined. At 35°C, the equilibrium weight gain (solubility) of benzene, toluene, chloroform, and CS₂ are 23.5, 19.8, 51.2, and 21.2 wt%, respectively. The initial weight gain is linear with root-time and pseudodiffusion constants for absorption into amorphous PEEK ranging from 0.35 to 9.85 x 10^-12m²/s were calculated. The desorption processes are two-step and are controlled by the T_g of the penetrant-resin mixture. The rate of diffussion into the crystalline material is extremely slow; crystalline PEEK reaches saturation (12.5 wt%) after immersion in CS₂ (35°C) for several hundred hours but, even after 1300 h immersion, the other fluids do not reach saturation.